Devanco Canada - Get The Right Garage Door Opener‎ and Parts

TS-15

Tarp Strap Bungee with Galv. S-Hooks 15"

Made of 100% natural rubber from Sri Lanka
Galvanived S-hooks
15" safely stretches to 23"

27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

PBTL3-BLACK

Replacement Button Only - N/O Open / Close Black

N/O switch and rubber cover for PBTL-3

BK200

Flat End Plate with Bearing 5-5/8" 4-Hole Sold per Piece

8-gauge

RSH-6114-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 120V With Elect. Board N4X Thru Beam Eyes Right Hand

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

Installation manual Sell sheet

3950-41DS

LiftMaster Dead-Shaft Sprocket Kit for 3950

Used on doors without live shafts
Same as 41A7280
Includes #41 chain sprocket

Sell sheet

CS303-FP-50

EMX Car Sense Direct Burial Sensor Flat Pack 50ft ** Replaced by LRS-FP-50

Lead probe ONLY. Requires the CS303-C-1 detector.
Easy installation above or below ground
Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Sensitivity display
Single cut installation with flat pack model

6X16SC50

Devanco Loop 6' x 16' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation manual Manuel d'installation Loop placement guide Guide de positionnement des boucles

XT2564-CUT

Xcluder Rodent Block 4" Black Sold per Foot

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

KH-3.5

Magnetic Key Hole 3-1/2" Tall

Decorative key hole only
Black flexible magnetic material with deep embossed design

029-98290-PRIMR

W-Style Replacement Door Primer Only Stainless Steel Package 029-98290

Replacement door size between 96-1/4" - 98" wide x 72-90" high
Primer only
Stainless steel package

C20-SR

Bearing Retainer for 1-1/4" (PFL6Z)

Same as PFL6Z. Bearing flangette only.
1-1/4" press fit

C16-32FHD

Bearing 1" x 2" Press Fit Heavy-Duty

Flanged ball solid steel bearing
Rating: 1 000 000 revolutions
Axial load: 150lb max
Radial load: 900lb max

K20-1050B-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4 TEFC

TAPS1458W

Stainless Hinge Screw 1/4" x 5/8" Self-Threader with Washer

Priced per each

V3564-00-W-200

Vinyl Seal 4" Bottom Bead End Grey 200' Spool

Bead diameter 3/16" - 7/32" +/- tolerance

ME123-M-BLK-END

Miller Edge Black End 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

ME123-M-BLK-LH

Miller Edge Black LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

02-108

Push Button Station 3-btn O/C/S Flush Mount Stainless Steel Faceplate

Nema 1
Standard 2X4 electrical junction box with stainless steel faceplate
OPEN/CLOSE/STOP allows complete control of the door

MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

Designed for use on rolling sheet doors.
It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
Floor level disconnect
24V NEC Class 2
Wiring is factory present to C2 mode

.......more details

Installation manual Sell sheet

95358

Marantec Front Idler Assembly

Complete Roller holder assembly for ML-Series rails
Used for belt and chain drive opener rails
Same as # 8030432

PHOTO-062

Manaras Monitored Photoelectric Cells N1 Thru-Beam 20' Range ** NLA use PHOTO-070

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 20 ft

65-52091-16

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

For 3/4 Hp & 1 Hp Trolley operators
Includes floor level brake release cable 1" x 12' round bar.

17-2701

LiftMaster Pulley 7" x 5/8" (G172701)

Same as G172701

MGS20-B-2U-06

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 6ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

MGS20-Y-2U-06

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 6ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

S142BRNN924

Carlo Gavazzi Amplifier 24V

Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
11-pin circular plug for easy connection.
8A SPDT relay output NPN/ PNP transistor output or alarm output.
Diagnostics for sensor test during operation.
Alignment help via LED or alternation of alarm output.
Level indication for dirt accumulation.

.......more details

102079

Flange Plate PFL6Z PFL206

2 required per bearing # 101475

TC3-411

Lynx Commercial Trolley Op. 3/4HP 120V for 14' High Door with Brake Contactor

Sell Sheet

50DCTWF

LiftMaster Receiver Logic Board DC. WiFi *** To extent of Inventory

Board: Tri-band Security+ 2.0l
Fits: 8550W
001D8363
Same as 50DCBL5 001D8363 041D8169 1D8169‑2 001D8214 1D8169‑1 1D8169 1D8363

IRB-MON

EMX Industries Nema 4 Through-Beam Photocells with Gold Hoods New UL325-2018 *** No Longer Available

Type B1 non-contact sensor
UL325-2018 compliant
Lens-less design
Simple 2-wire connection
Relay contacts available
NEMA 4X enclosure

.......more details

Installation Manual Sell Sheet

MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

Continuous-duty base mount
This item is compatible with BRAKE011

MOTOR403

Manaras Electric Motor 1/2HP 120V 1PH

Instant reverse
Medium-duty 1500 rpm
For OMJ/OMH

ST-ACTIVATOR

Soft Touch Activator

Same as ST-PRIMER
Used to make the glue dry faster
Approx 10 ounces

ST-GLUE

Soft Touch Glue

For use with Soft Touch Profile
1 oz

CP-BRG-1

Lynx Bearing 1" *** Replaced by HW-BRG-1

2 in total on a MCJH

ZT36640159

Rolling Steel Door Model 702 Firestar No 2 Slat 22-Ga

ME111-L

Miller Edge Black Left Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

10-3209_GATE_BRKT

LiftMaster Gate Bracket

Fits SL580GL SL595GL and new IHSL24UL INSL24UL models

BOARD070MR

Manaras Replacement Control Board (Monitoring)

On-board 390MHz radio receiver accepts 50 remote controls

Replacement Chart Guide de remplacement

MALEDCW

LiftMaster Counterweight for 17ft LED Arm

For use with MALED17 17 ft. LED Arm for MA/MAT

.250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Green

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

79-16088

LiftMaster Circuit Board Assembly for LGO **discontinued**

Same as K79-16088

50027

Doorlec Maximum Run Timer with Base

H101L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Left Hand W/Brake ***No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'installation Sell sheet Brochure

10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

1003-4"-PER-FT

Bottom U-Rubber 4" Black Sold per Foot

4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

26-945255

Truck Door Intermediate Panel (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

.262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

9150000620

3/32" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

MK-00157

Micanan Intrinsically Safe Modification (Safepack)

Modification available for add-on to certain models only

7001-WG-7-MO

Residential Wood Grain Side & Top W/S Medium Oak 7' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-16-CO

Residential Wood Grain Side & Top W/S Cherry Oak 16' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

1001-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

Aluminum retainer with black dual-fin vinyl

1005-2-8'

Aluminum Bottom Retainer U-Shaped 8' Long**Actual Length 8'1"**

For door thickness 2"

MK-00005

Micanan Cut-Out Limit Switch

CB3160500-KOR

Cable 3/16" 7x19 500' Galvanized Supreme

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs
A higher quality cable compared to the Chinese cable
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

MD-00003

Sprocket 41B36 x 1" Bore 1/4" Keyway

2 set screw 5/16

SNRRLIGHTJHL

LiftMaster Light Bulbs for MiniKey 10/pkg

Light bulbs for recessed keypad
Same as SN1650029

68-9E

Wheel Chock 68-9E Pyramid Rubber with Eye Hook

Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

EL1-SS

LiftMaster Telephone Entry System Stainless ** NLA

A Telephone Intercom and Access Control System which provides wired telephone intercom communication and secure access control at the gate or door.
Connects directly to the existing residential home phone line so no additional monthly expenses are incurred.
Stainless steel faceplate with black powder coated housing is attractive and tough.
200 (4-digit) unique programmable entry codes provide convenient assigned access.
Optional power supply transformer not included: K002B0821-1

Programming Instructions Instructions de programmation Sell Sheet

HSC-1000

Hand Swager 1/4" & 5/16"

Swages 1/4" and 5/16"
Made in Japan

BSG115-LED

Devanco Stop and Go Light Black Housing 115V LED

LED Traffic Light Red/Green Dock Light
Weather-proof 2 piece housing with highest available UV rating
Ultra bright LED's for easy viewing in direct sunlight
Lenses measure nearly 4" in diameter
Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
Made in Canada

.......more details

Installation Instructions Instructions d'installation Sell Sheet

LIMIT025A

Manaras Single Snap-Action Limit Switch with 'S' Lever

For all Manaras commercial operators prior to 2000 - except light duty models
Can be used on Doorlec Lynx and others
Unimax (SPDT)

Limit Switch Chart

RELAY024

Manaras Relay DPDT 24VAC

Used in all heavy-duty operators as well as MLT and Opera-MH/MJ

MA117

LiftMaster Counterweight for Arms 15ft & Up

MJ00004

Micanan Clutch Plate Aluminum 3/4" ID

27-20114

Truck Door W-Style Spring Assembly Curbside RHW 35" Long

Wire thickness: .187
Assembled Spring length: 35 inches long
Inside diameter: 2 3/16"
Includes cable drum and bearing assembly winding cone wound onto spring for stronger design and internal spring spacer.

37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
Purple

97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

4011-6FT

Aluminum Retainer only for Light Brush or Vinyl Insert 6' Long 90 degree ** To extent of Inventory. *** Sold in 12ft Lengths Only

For angle application - 90 degree
For use with Light Brush or Vinyl Insert.
For applications that require both brush and vinyl

ME123-CA3

Miller Edge L-Shaped Aluminum Mounting Channel Sold by the Foot

30B530

LiftMaster Capacitor 56uF 220V ** discontinued

Same as LiftMaster # 30B620

18FT-TROLLEY-SET

LiftMaster 18ft Double Angle Rail Set for Comm. Trolley Ops (2 pcs) *Actual length 251"*

Double Angle Rails for doors up to 18' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us

41ASWG-438SA

LiftMaster Motor with Limit Switch Harness for LA400

Electric motor for LA400

1104-8'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

27-48-400

Extension Spring 8' Door - 400 lbs Tan

Single - Loop
27" long 48" stretch 400 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-180

Extension Spring 8' Door - 180 lbs Gold

Loop ends
27" long 48" stretch 180 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-200

Extension Spring 8' Door - 200 lbs Tan

Single - Loop
27" long 48" stretch 200 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-150

Extension Spring 8' Door - 150 lbs Red

Single - Loop
27" long 48" stretch 150 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G07-SS

Hinge #7 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

K1D8052-1CC

LiftMaster Control Board for LA500DC LA400 LA412

014D1270D

EP2989

Exhaust Port 5" with latch long barrel ** Discontinued **

5" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.

BRAKE013A

Manaras Band Brake Assembly Kit OSH Nema 4/12

Installation Manual

6X18SC50

Devanco Loop 6' x 18' Saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

11-10987

LiftMaster Clutch Shaft for MH

PRO-LH-5011U-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board 372 MHz receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.

.......more details

Installation Manual Sell Sheet

PRO-HBH-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

WKP5LM3

LiftMaster Wireless Keypad 5-Code ** Replaced by KPW5

Wireless access control keypad
Same features as WKP250LM3
5 code capacity - 4-digit codes
2-way design with confirmation beep
900MHz

Programming Instructions

H031

Rolling Steel Slide Bolts and Holder Fire Door

14-J

Rolling Steel 3" Flat Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

17K

Rolling Steel 2" Flat Continuous Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

AC9

Felco C9 Cable Cutter 1/4" Capacity

Tool length: 13"
Gives a clean cut without crushing thanks to the triangular cutting system.
Blades and centre bolt in high-quality hardened steel for exceptional performance.
Thumb catch designed for one-handed operation.
Pressed steel handles with non-slip grips
Maximum cutting diameter: 9mm / 0.35in

.......more details

Data sheet