Devanco Canada - Get The Right Garage Door Opener‎ and Parts

O042010

AirLift Bracket Horizontal 90 Degree Lift Bar

24114

Doorlec Pocket Wheel (Hoist) Chain Sold per Foot

For various Doorlec ops

1420-134-WHITE

Elton Commercial Window for Flush Doors 1-3/4" thick 1420 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 19 1/2” x 14 5/16”
Cut-out size: 18 3/4” x 13 5/8”
Vision area: 16 15/16” x 11 5/8“
Different glass options and frame colours are available upon request

.......more details

DEV-CHS

Devanco Chain Hoist Assembly for RSSD/RSFD

For use on Devanco rolling steel service doors and fire doors

K79-13493-600

LiftMaster Logic Board Replacement FDC5021UR

Replacement board for fire door model FDC5021UL

7176.218.33.96

Whiting Heavy Duty Torsion Assembly .218 x 35" shaft 96"

MK01563

Explosion Proof Killark Labeled ON/OFF Key Switch

2376.192.34.930

Whiting Torsion assembly .192 wire size 34" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

180203

Decorative Hardware Escutcheon Plate Spade Steel Black

Black powder coat with crinkle finish

939C00010

Extension Spring Steel 1 pc Door 8x7 Hook End Special Order

For cantilever 1-pc door

SPR50B18X1

Sprocket 50B18 1" shaft 1/4" KW

18 tooth sprocket for #50 chain

EHJ-343-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 460V-3Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

9723-12

Whiting Pull Strap 12" with Steel Retainer

12" long

K19-4853

LiftMaster Chain #48 x 53 No Master Links

Fits the SL595UL gate operators

O02R9209

AirLift Breather Vent

15220

Doorlec Fuse 1 AMP Slow Blow Sold Individually

STRUT-2-1/4-14'

Door Strut 2-1/4" Hemmed 14 ft Long

Reinforcement bar 2-1/4"
Galvanized

BCH501L5-RH

LiftMaster Hoist Op. with Carwash Mod.and Brake 1/2 HP 115/230 VAC Logic 5 Right Hand ***Replaced by CRBH501-RH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes and brake

1104-7FT-CLAYSTN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Claystone

Claystone rigid vinyl retainer with claystone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

ME112-C4

Miller Edge Clima-Guard U-Shaped PVC Mounting Channel Sold by the Foot

1104-16FT-CLAYSTN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Claystone

Claystone rigid vinyl retainer with claystone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-10FT-CLAYSTN

Residential Side & Top PVC Weather-Strip with cap 10' Long - Claystone ** NOT AVAILABLE

Claystone rigid vinyl retainer with claystone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

CAPXLTK

LiftMaster Trim Kit and Back Kit

Trim ring and back box for CAPXL.
Conceal openings left from other systems in flush-mount Infinity L and Icon installations.
Dimensions: Outer Trim – 23.75” x 19.375”

MOTOR276-WIRED

Manaras Electric Motor 1HP 575V 3PH Wired for ECB/Brake

ME111-4WIRE-M-RH

Miller Edge 4-Wire Monitored Black Right Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Worksheet Installation manual Sell sheet

ME110-C3

Miller Edge Black Rigid PVC Mounting Channel Double-Sided Tape Sold by the Foot

7/8" length

K77-38105

LiftMaster C-Clamp Kit SL595U Qty 2

Complete kit includes: (2) C clamps with mounting hardware

TRACK-SET-3-134-8

3" Tracks Set 8'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

1KXS

Key Switch O/C w/Stop Btn Tamper Proof Nema 4 Surface Mount

OPEN-CLOSE with Center Return Key Switch with Stop Button Mortise Cylinder Tamperproof
Dimensions: H=4-3/8 W=4-1/8"" D=2-5/8""
Randomly keyed

RCB-60100

Roller Chain Break #60 thru #100

P40-10PFO

Hand Crank Reducer 107174

ME123-2M-BLK-RH-T3

Miller Edge Black RH 2-Wire Monitored T3 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

T110

Manaras Trolley Track 10ft for 3/4HP & All APT models

For models OTH/OTBH/RTBH 3/4 hp only with Chain #41

BCSI-PM27

Pivin Drapeau Sprocket & Bearing Assy BCSI Gate Operator ** Price by Quote Only

CP-LX300

Lynx Interface Board for UL325 models

For use on 460V & 575V 3 Phase only

CLUTCHPLATE004

Manaras Clutch Plate 5/8 Trolley

GAREX-PVC-W-18

Residential Side & Top PVC Weather-Strip with cap 18' Long (217") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

GAREX-PVC-W-12

Residential Side & Top PVC Weather-Strip with cap 12' Long (145") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

GAREX-PVC-W-7

Residential Side & Top PVC Weather-Strip with cap 7' Long (85") - White

White rigid vinyl retainer with white flexible vinyl seal.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

041D8227

LiftMaster Wiring Harness

For use with various LiftMaster® Chain Drive Garage Door Openers.

K-127A0112B

LiftMaster Chip Mega Arm

Also known as: K29-CHIP-535

71-17148

LiftMaster Fuse Link Kit FDC

Fuse Link Replacement Kit for use with various LiftMaster® Fire Door Commercial Door Operators and Commercial Access Solutions

21-35057

LiftMaster Transformer 460V 24VAC 40VA

575V PRIMARY 24V SECONDARY
Same as K21-35057

41A6288

LiftMaster Work Light Hardware Kit

K72-12564

LiftMaster Output Shaft Kit H Prior to 2005

Also known as: 308116010 308116010HK

T107

Manaras Trolley Track 7ft for 3/4HP models #41 Chain *Actual length 114"*

For models MGT/OTH/OTBH 3/4 hp only with Chain #41

71-6532448

LiftMaster Heater Kit Mod. 230V Field Install

Compatible with LiftMaster® Models SL585GL and SL595GL Slide Gate Operators

N4GH751L5-RH

LiftMaster Gearhead N4 w/Watertight/Oiltight Mod. and Brake 3/4HP 115/230V 1P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

2G-LEFT

Rolling Steel 2" Curved Stamped Endlock Left Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlock

BOARD003

Manaras Repl. Circuit Board MA-50 110V Lite Duty

Used on model MDTB

18212

Limit Switch LS2 G3M Female

For use with Rite-Hite dock levelers

GH-321-1

Doorlec Industrial Jackshaft Door Operator 1 HP 230V 1P with ECB

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

2100-258-UPS

Linear Tension Bolt UPS 1/2 Chain

Used on various Linear Gate operators

XBA4

NICE Indicator Lights for M3/M5BAR 13.1ft

The Apollo XBA4 is a 13.1 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the M3BAR and M5BAR barrier gate openers.

WA11

NICE Adjustable Stand for L & M BAR Gate Op

Adjustable stand for the barrier arms of the M-Bar & L-Bar barrier gate operators
Attaches to ground and provides support when arm is down

CP-BR-ASSY-575V

Lynx Brake Kit with 575V Solenoid CDJH

Complete brake kit with solenoid

76618

OHD Brake Pads Sold in Pairs

MG00006

Micanan Hex Nut 1/4-20UNC

3 required per operator

MF00045

Micanan H.H Slotted Self Rounding Washer Head Screw 8-32UNF x 3/8"

M7BAR-R10V1-PKG

NICE Barrier Gate Op. w/Heater Arm Package 110VAC

16 to 23 ft Arm Length
120VAC Power Source / 24VDC Operational Voltage
Open/Closes in 6 - 10 seconds
200 Cycles/Hour
Aluminum arm with red adhesive reflector and optional lights/bumper strips
ETL Listed (UL325)

.......more details

RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep

Installation manual Spec sheet

EHJ-353-3/4

Doorlec Industrial Jackshaft Op. ECB 3/4 HP 575V-3Ph

Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
With DC-2000 controller

GH-383-3/4

Doorlec Industrial Jackshaft Door Operator 3/4 HP 208V 3P with ECB

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

14211

Doorlec Solenoid-Brake Lever Upper

Fits model LJH

3BXT-YELLOW

Replacement Button/Switch Only - Yellow

Replacement button for 3BXT

14-1056

PVC Roll 12" x .120" x 200ft Roll Low Temp Smooth for Replacement Strip Curtain

Clear and smooth. Suitable for most average applications.
Temperature Range: -34° C to 65° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

K77-36389

LiftMaster Hardware Kit LA500

K41-39254

LiftMaster Reflector and Bracket Kit

Commonly used to replace a lost or damaged reflector for LiftMaster® Monitored Photoelectric Sensors (LMRRUL).
Complete kit includes: (1) Bracket (1) Reflector (1) Reflector Cover and Assembly Hardware
Compatible with LiftMaster® LMRRUL Monitored Retro-Reflective Photoelectric Sensors
Reflector Dimensions with Hood: 2.6" x 4.72" x 2.0" (W x H x D)
Reflector MUST be mounted vertically; no horizontal mounting

BRAKEPART020

Manaras Brake Shoe Assembly Kit (SHOE021/022)

212I

Nortek Linear Indoor Flush-Mount Keypad

120 users
Single gang design
1 SPDT 2 amp relay and three 50mA negative voltage outputs
Optional 293 relay board converts 3 voltage outputs to SPDT relays
Indoor use only
Functionality mode: 212 232

.......more details

BPE-50

EMX Industries Battery Powered Through-Beam Photocells EMX-1500-1

Thru beam configuration
90° adjustment left or right
The transmitter and receiver use 12-24 VDC/AC but the BPE-50 can also be powered by two 3.6-volt lithium batteries (Batteries Included)
50 ft. operating range
Size: 4.4" (112mm) x 2.05" (52mm) x 1.3" (33mm)

MC22-2WIRE-LH-G

Miller Edge MC22 2-Wire Non-Monitored Left Hand Gray Includes Funny Flaps - Sold per Foot

��Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty

Worksheet

COMP-VILLERAY-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Compact Villeray design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

MONTARVILLE-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Montarville design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

NEW-HAMP-R12

Garex Ready to Install Door Special Order

R12 Insulation - Short Panel with vertical lines carriage style - Panel spacing to accomodate decorative hinges and handles - Available in steel white and black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

VERMONT-R12

Garex Ready to Install Door Special Order

R12 Insulation - Short Panel with vertical lines carriage style - Panels are spaced to not allow for decorative handles - Decorative hinges can be used - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

URBAN-R16

Garex Ready to Install Door Special Order

R16 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

QUANTUM-R16

Garex Ready to Install Door Special Order

R16 Smooth Finish - Available in 20 GA steel white only - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

WHTG-COLDSAVER

Whiting Special Order ColdSaver Door ** POR

Special order to customer's specs
2-1/8” thick panels built with aluminum facings inside and out for easy cleaning and excellent acceptance of paint and decals.
No rivets on face of door to interfere with lettering or decals.
Aluminum extruded panels .070” thick resist puncture.
Foam-in-place urethane insulation.
Panel joints are double sealed.

.......more details

A123300SGLPK

LiftMaster Battery w/ Harness Single 33AH 12V

K77-16011

LiftMaster Hardware Kit for CPS N4

This is a replacement Sensor Hardware Kit only.

ME00006

Micanan Intermediary Shaft 1" x 10-7/16" c/w KW

CP-SH-34-MC3

Lynx Complete Limit Shaft Assembly #41 Chain

For trolley operator

CP-SH-34-12

Lynx Clutch/Drive Shaft Assembly No Pulley

For trolley operator

106141

Marantec Shaft Adapter

10TD900INDHH3

BEA 3-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

Product guide

E/BLOP/149

Automatic Systems Safety Edge for BL229 13'

1013-1-1/4-18'

Rigid Vinyl Bottom Retainer L-Shaped 18' Long

For door thickness: 1-1/4"

LVB420-11SF/P1

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

.192_2-3/16_60R

Spring Wire .192 x 2.188 x 60" CTD RAW RH

.192 x 2-3/16" x 12'

41D0216-2

LiftMaster End Panel with Light Socket

Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
Circuit board not included

422LMC

LiftMaster 2-Channel Co-Axial Receiver 390 MHz ***Discounted

Smart Garage Door Opener® electronics on each channel for fast programming
Bell wire attached for easy second channel hook-up
18 - 35VAC/DC
FCC certified 390MHz

21001

Limit Switch Micro

CP-MO-34-123/1

Lynx Electric Motor 3/4 HP 115/230V 1 Ph

Electric motor only

MG020-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

902-T-7X9-VL

Hardware Set 3" Industrial 902-T for 7' x 9' VL

A variety of options and sizes are available call for quote
Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.

K75-36260

LiftMaster Lock and Keys

For various Liftmaster commercial slide and swing gate operators.

60-6550-C-BLK

Speed Bump Black 36" Econo Light Weight for Concrete ***NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details