Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-H-7511E-LH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

Installation manual Specification sheet

MM00155

Micanan Disconnect Arm PRO-HR

34201

Doorlec V-belt Pulley MA20 2" x 5/8" bore

41C5141-1

LiftMaster Square Rail Trolley Kit Chain Drive

Same as: 062313 41C5141 41C5141-1
Compatible with all Chamberlain and Craftsman square rail chain drive models

41A2780

LiftMaster Chain Pulley Bracket Kit

Also known as: 1B3214 1A2780 1C2762 41A2780 41B3214
Compatible with ATS 2595 3595 models

25-01064

Truck Door Stainless Cables 97" 1/4" eye 7x7 Pair for Roll-Up Doors ** To extent of inventory

Works with both Whiting and Todco doors
Cable size: 1/8 "
Nylon eye ends are used on 1/4" & 7/16" eye cables which give superiour strength and corrosion resistance

19054

Doorlec VBelt 5L380

works on model SWGO

MI00001

Micanan Motor Pulley 5L 5/8" ID x 2" OD

PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

SD751L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Right Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

G50-FL120-24

LiftMaster Flexible Red Rope Light 24VAC/DC 10ft ** Discontinued

Flex Red Light Strip for BG770 & BG790 Barrier Gate Operators
24VAC/VDC
10' Long

E3JM-30FT

Omron Thru-Beam Photoelectric Sensor Nema 4 0-30ft Range

Easy-to-wire terminal block
Built-in timer offers selectable ON-delay OFF-delay and one-shot
Relay or transistor output models
Light-ON/Dark-ON operation switch selectable
Model: E3JM-10M4-US

98EO626

Panic Bar for Pedestrian Door- Exit Only

Panic Bar for exit only

G108019

LiftMaster Arm Clamp PVC

Used in connection with arm # G651209P

10-1000-CUSTOM

Strip Curtain PVC Door Custom Made ** Price by Quote Only

.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

DC motors

SL332COP

Copper Sleeve 3/32" 100 Sleeves per Pkg ** Price on request

Oval sleeves ONLY
Stops sold separately part # ST332COP

D-2-6

Keyed Disconnect Device 6ft Cable

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

Shaft Mounted Junior Hoist
4:1 Reduced Drive
Sprocket: 41B36. Bore size: 1-1/4" diameter
Cross Reference: OMI 4020
Requires minimum 3/8" center line offset.
Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.

.......more details

Sell sheet

LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

SPR41B36X1.5

Sprocket 41B36 1.5" Bore 3/8"x3/16" keyway

MK00188

Micanan Auxiliary Contact Block

VBELT_4L290

VBelt 1/2" x 29" (4L290) Not Cogged (A27)

V-Belt not cogged

Q239

LiftMaster Limit Switch Wire Harness K70-51094 **DISCONTINUED

Includes harness and 4 limit switches for Miracle One

.331-514-L

Cut-to-Length Torsion Spring .331 x 5-1/4" Left Hand Wound Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

5-36-6

2" Vertical Track 14-GA 11'-4" (12' door) Sold per Pair

8360WLB

LiftMaster 3/4 HP DC Premium Series Chain Drive Wi-Fi Lock with BBU Capability **To extend of inventory

Built-In Wi-Fi® for the easiest way to connect the garage.
Real-Time Alerts indicate the status of the garage door via email or push notifications.
Monitor and Control the opener from anywhere using mobile devices.
Consume up to 75% less power in standby mode.
Soft Start/Stop for smooth operation.
Safeguard your household with Security+ 2.0™-with every click a new code is sent to the Garage Door Opener so the door opens only for you.

.......more details

MG020-B-2E-06

Miller Edge Sensing Edge Black 2-Wire End Outlet 6ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

PROROLL4

Cantilever Roller 4" Round Post with Covers Sold as a Pair *** Discontinued

3100 pound rating
Integrated polyurethane cover for safety ensuring UL325 compliance
Sealed bearings for maintenance-free operations
DuPont™ Delrin® injection molded for smooth quiet movement
High-precision roller for water resistance and industry's best overall temperature rating

111914.0002.S

Overhead Sprocket 28T 1/4P 501 D-Bore

Sprocket for the limit shaft
For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.

111537.0001.S

Overhead Sprocket 38T 1/4P

Sprocket for the limit shaft
For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.

SNACPH32

LiftMaster HID 30-bit Proximity Card Facility Code 2 *Discontinued*

Same as SN000099-30-2
Compatible with KPR2000 reader
Replaced by LMPC2-SN (need to know facility code)

BCH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand ***Replaced by CRBH753L5-LH

Industrial Duty Hoist Operator with Damp Environment modification
Comes with CPS-UN4 photoeyes
External brake included

Installation manual Manuel d'installation Sell sheet Brochure

MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

SPST
2 mounting holes
Dimensions: 2.375 x 0.875 x 0.75 inches
Color: Light Gray
Intended for indoor use

SOLID_SHAFT_13'

Solid Shaft 1" Keyed 13 ft Galvanized

Actual length is approx. 13'-1"

26-943255

Truck Door Bottom Panel with Seal (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

FHKS3D-86

Stainless Steel Face Hardware Kit 3" Track Double End Stile 6 Panel 8 Sections

Kit includes: Top & bottom fixtures center hinges end hinges and self drilling hinge screws
All hardware is heavy-duty 12 ga material
Kits are configured for up to 2" door thickness. Other door thickness are available by request.

7001-9-CHARCOAL

Commercial Side & Top Weather-Strip 9' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

345

Cable Clamps Galvanized 1/8" 100/pkg

Galvanized malleable cable clip

K180B0325-5

Rocker Switch / Circuit Breaker 250VAC

K77-37986

LiftMaster Current Sense Conversion Kit 3PH L5

STEEL-MAN-DOOR

Pedestrian Door Steel Special Order

Made to customer specifications

1104-16'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Light Bronze (F) **NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-14'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Light Bronze (F) **NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-12'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Light Bronze (F) **NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

K12-8034

LiftMaster Female Rod End LH

Upper rod end for BG770 BG790
Same as part # 12-8034

.319-6-LH

Cut-to-Length Torsion Spring .319 x 6" Left Hand Blue/Green

Spring wire only. Cones and Filler extra

SPRING-FILLER

Spring Filler for 5-1/4" and 6" Torsion Springs Sold with Pre-Cut Springs only Sold per Inch

Required when ordering pre-cut torsion assemblies with cones

.319-6-RH

Cut-to-Length Torsion Spring .319 x 6" Right Hand Blue/Green

Spring wire only. Cones and Filler extra

LM21XPBBVB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup and Voice Board ** No Longer Available

UL864 Revision 9 compliant
Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
Trouble and alarm relays for communication with the fire alarm control panel if required
Audible trouble sounder to indicate when the release device is not operational
On board diagnostic LEDs for easy troubleshooting

.......more details

Installation manual

5001-WG-18-MOAK

Residential Side & Top Weather-Strip 18' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Special order
Sold by full case quantity (20)

.......more details

1104-18FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 18' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

PPLV1-10

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 10/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Sold in a 10 pack

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure

POCKETWHEEL007

Manaras Pocketwheel Assembly with rollers and clips (Hoist-A-Matic)

Includes POCKETWHEEL005 CAM012 and CLIP020

750

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#3PT) 1000/Box ** Indef. delivery

Indented Hex Washer Head
7/16" Head
Max RPM = 2000
#3 point = long cutting edge (less thread)

41ACOM12001

LiftMaster Capacitor 32UF 230V **DISCONTINUED

MOUNTSHAFT016A

Manaras Clutch & Hoist Shaft Kit for Opera-SH Nema 4/12 (OSHW)

Input / clutch shaft kit for Manaras Opera-SH N4/12

VFD-MOD

Micanan Variable Speed Modification Up-Charge for VFD Operators

Variable Frequency Drive modification for commercial operators
Whenever the primary power is 575V must add MX00164 panel

6944.1

Whiting Top Closure Assembly Stainless Steel Dry Freight

This is a Whiting original part

CS303-FP-100

EMX Car Sense Direct Burial Sensor Flat Pack 100ft *** Replaced by LRS-FP-100

Lead probe ONLY. Requires the CS303-C-1 detector.
Easy installation above or below ground
Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Sensitivity display
Single cut installation with flat pack model

AK-11-KEY

Linear Key (1) only for AK-11 (2200-884)

Replacement Key ONLY qty: 1 only

NIR-HD

EMX Industries NIR Hood Cover Steel

The hood keeps rain and other debris from distorting or blocking the photo beam.
It also helps to keep the sun from glaring off the reflector and disturbing the beam's reflection.
Replaces the mounting bracket that comes with the sensor.
Comes with Hood two sets of nuts and bolts and a plug

1003-3-DF-CUT

Bottom U-Rubber 3" Dual Fin Black Sold per Foot

Sold in cut-lengths per foot.
Dual fin

124773

Roller 3" UHMW 7-1/4" Stem Rubber

3" UHMW tire covered with rubber
6202 sealed precision bearing
7-1/4" zinc plated stem
Rating: 200lb load; 10000 cycles of a 12' door
Helps quiet the operation of jackshaft operators

28020020-500

Cable Stainless 5/16" 1x19 500' Inox ** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

28020024-500

Cable Stainless 3/8" 1x19 500' Inox ** Price on request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

82-SB50-08

LiftMaster Shoulder Bolt 3/8"-16x8 **DISCONTINUED

Shoulder Bolt
For SW470-S3
Formerly 82SB5008 G82SB5008

V3563-00-W-200

Vinyl Seal 3" Bottom Bead End 198" Bead Grey 200' Spool

Bead diameter 3/16"-7/32" +/- tolerance

ME123-M-YEL-LH

Miller Edge Yellow LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

MHS5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

Designed for use on rolling sheet doors.
It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
Floor level disconnect
24V NEC Class 2
Wiring is factory present to C2 mode

.......more details

Installation manual Sell sheet

.306-.250-DUPLX

Duplex Assembly .306 x 6" x 39" and .250 x 3-3/4" x 39" with Cones Right Hand

Assembled by manufacturer

MU22-2WIRE-E-Y

Miller Edge MU22 2-Wire End Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

7220355

FAAC 400 Front Fitting

7019195

FAAC 400 Screw Long Carte

PRO-APTB-5011-R

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake Contactor

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

Installation manual Specification sheet

PRO-TB-7523-U

Micanan 3/4HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

9301644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones RHW

053156

Magnetic Mount Micro Dome Beacon Amber ** To Extent of Inventory

60 LEDs 360 degree revolving flash / intermittent flash
-30 degree celsius to + 50 degree celsius extreme temperature reliability

MOTOR403

Manaras Electric Motor 1/2HP 120V 1PH

Instant reverse
Medium-duty 1500 rpm
For OMJ/OMH

ST-PROFILE

Soft Touch Profile Sold per Foot

Yellow air-wave edge
Fits most standard 1-5/8" retainers
300 feet in a roll

.393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

MK-00511

Micanan Resistor 330 OHM 5Wc/w Leads (For Motor)

ME111-R

Miller Edge Black Right Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

PRO-H-FRAME

Micanan Frame for PRO-H

PHOTO-038

Manaras Non-Monitored Photoelectric Cells Nema 4/4X/6P/12/13 Retro-Reflective

Retro-Reflective
24Vac 30' range
Includes 3" reflector

.306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

072017.0001.S

Overhead Travel Nut for RCH

Teflon travel nut

10-3209_GATE_BRKT

LiftMaster Gate Bracket

Fits SL580GL SL595GL and new IHSL24UL INSL24UL models

28773A

Genie Idler Pulley for Belt Drive

Fits PMX500-I B/C Belt & Chain drive model
Front Pulley for belt channel applications only.
Compatible with the Ovehead Door Legacy BELT DRIVE (model #696 and #496) and Phantom (model #777) garage door opener
Part Numbers: 28773 28773AS 28773S 38773A

CP-LX100

Lynx Control Board with Cover for UL325 models

For all voltages

Programming instructions

PBS3-RED

Replacement Button Only - Red

Replacement button for 02-403P

H105L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 575 VAC 3 Ph Logic 5 Left Hand W/Brake

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'installation Sell sheet Brochure

H101L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Left Hand W/Brake ***No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details