Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
1104-14FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 14' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
MV-00026

Micanan 24V Commercial Receiver CR32-24V

Programming Instructions
8FT-BELT-LINEAR

Linear 8ft Belt Drive Rail for residential openers (HBT8C)

  • 8ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
8FT-CHAIN-LINEAR

Linear 8ft Chain Rail for residential openers (HCT8C)

  • 8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
423LMC

LiftMaster 3-Channel Co-Axial Receiver 390 MHz

  • 8" coaxial antenna included
  • Used for open/stop/close on commercial motors
  • N/O and N/C selectable
  • Compatible remote: 33LM
Installation ManualManuel d'Installation
MK-00014

Micanan Reversing Relay 220VAC Coil DPDT (Flange Mount)

  • 8-pin
36179R

Genie Traveler Assembly for Screw Drive

  • Fits model 3060 L/M
  • Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R
PEDALU42

Aluminum Pedestal Post 42"

  • Pedestal post with hood
  • High quality aluminum
  • 42 inches
  • Dual face-plate allows for easy wire connections
Spec SheetShop drawing
7470.093

Whiting Side Seal for Insulated Doors 93" Long

  • Fits Coldsaver and Tempguard
76-G0537

LiftMaster Alarm Assembly Kit for SL540/580

Installation Manual
86-CP05-108

LiftMaster Cotter Pin 5/32" x 1-1/2"

TUBE_SHAFT_8FT

Hollow Shaft 1" x 8'-10" Galvanized 16 gauge

.234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.234-134-L

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.234-134-R

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF258
2807.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Curbside

  • Replacement torsion spring with cones for Whiting Door Serial # 138631
  • Specs: .139 x 2-3/16" x 14" Long
  • Curbside
  • For Roadside order part #2806.139*140
1091303602

Overhead 2-btn Transmitter 360 MHz model: 111663-3602 *** No Longer Available

  • OVERHEAD DOOR remote control transmitter 109130-3602 works with 9 dip switch on 360 frequency.
  • Part number has changed to 111663-3602
Programming Instructions
10FT-RAIL-CHAIN

LiftMaster 10' chain drive rail 1710LMC - colour code: Red

  • #48 chain size
  • Price reflects cost if purchased with an opener
8FT-I-BEAM

LiftMaster 8' I-Beam Rail 3708CH / CD1008

  • I-Beam Chain Drive Rail for model 3595
77810.0001

Overhead Door Box Assembly Cushion (#111389.0001.S) ** Price by quote only

  • Garage door operator bracket for older Overhead Door residential models (Automate 70 Touch n Go R-80 100 100SS 1000) and commercial garage door openers.
41D794

LiftMaster Replacement Motor with Positioning Sensor

  • Electric motor for model 3850
Installation ManualManuel d'Installation
535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

  • Over 100 billion possible codes makes it impossible to duplicate the frequency
  • Jumper option for momentary or constant relay contact
  • Specifically for use with most 3-wire systems without a transformer
  • Accepts up tp 8 Security+ remote control codes and one keyless entry
  • Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
  • Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required
    • .......more details
CR2032

Maxcell/Renata 3V Lithium Button Cell

ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

.468_6"-LH

Torsion Spring .468 x 6" x 12ft LH Blue/Orange. **NLA

  • Wire size: .468
  • Inside diameter: 6"
  • Length: 12 ft
.375_6"-LH

Torsion Spring .375 x 6" x 12ft LH Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
.468_5-1/4"-LH

Torsion Spring .468 x 5-1/4" x 12ft LH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.343_3-3/4"-LH

Torsion Spring .343 x 3-3/4" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.262_3-3/4"-LH

Torsion Spring .262 x 3-3/4" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.306_2-5/8"-LH

Torsion Spring .306 x 2-5/8" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.262_2-5/8"-LH

Torsion Spring .262 x 2-5/8" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.234_2"-LH

Torsion Spring .234 x 2" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 2"
  • Length: 12 ft
.243_1-3/4"-LH

Torsion Spring .243 x 1-3/4" x 12ft LH White/Yellow

  • Wire size: .243
  • Inside diameter: 1-3/4"
  • Length: 12 ft
972LMC*

LiftMaster 2-btn Security+ Transmitter 390 MHz ***Discontinued

  • Both buttons feature Security+ rolling code technology
  • Compatible with models manufactured from 2005
  • Second button can learn other shared Liftmaster radio-controlled devices.
  • Includes visor clip and Lithium battery CR2032
375LMC

LiftMaster Universal 2-btn Transmitter ** USE 380UT

  • Dual frequency universal transmitter
  • Will activate 2 different types of openers (1 on each button)
  • Compatible with major brands except Marantec & Hormann
  • Visor clip and battery CR2032 included
Programming InstructionsInstructions de programmation
23-2017

LiftMaster Limit Switch SPDT

19-40HL

Half Link #40

  • Half link for #40 chain
  • ANSI Standard Carbon Steel
24-24-6

Small Relay 24VAC 11-Pin 3 PDT

144C54

LiftMaster Idler Belt Pulley

  • Wide idler belt drive pulley
  • For square rail assemblies
19-48ML

Master Link #48

  • For #48 chain (#410)
  • Same as #65 chain
41C4398A

LiftMaster RPM Sensor Kit

  • RPM sensor assembly 1986 - present
Installation Manual_bilingual
19-40ML

Master Link #40

  • For #40 chain
  • ANSI Standard Carbon Steel
.406_5-1/4"-RH

Torsion Spring .406 x 5-1/4" x 12ft RH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.468_3-3/4"-RH

Torsion Spring .468 x 3-3/4" x 12ft RH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.250_3-3/4"-RH

Torsion Spring .250 x 3-3/4" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.250_2"-RH

Torsion Spring .250 x 2" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
.243_1-3/4"-RH

Torsion Spring .243 x 1-3/4" x 12ft RH White/Yellow

  • Wire size: .243
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.207_1-3/4"-RH

Torsion Spring .207 x 1-3/4" x 12ft RH Brown

  • Wire size: .207
  • Inside diameter: 1-3/4"
  • Length: 12 ft
PL-A03-NEW-BRD

Lynx Replacement Logic Board New Version

  • New version board works on operators with a red cover
  • Replacement logic board for Napoleon/Lynx Proline garage door opener
  • For openers built June 2008 or later (date code 0806 or newer)
  • This board does not have a transformer.
H14G03

Hinge #3 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #3 position
  • Use between sections 3 and 4
  • Same as part number 243
    • .......more details
OSH-6533-ECB

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

  • Used on MTH MTBH MSL models
  • Type B
  • Inside length 32 inches
LIMIT025

Manaras Single Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT001
  • For all Manaras commercial operators prior to 2000 - except light duty models
  • Can be used on Doorlec Lynx and others
  • Unimax (SPDT)
Limit Switch Chart
BRAKEPART018

Manaras Brake Shoe Assembly Kit

  • Kit includes SHOE001 & SHOE002 for old brake system.
  • Fits all Manaras operators except gear head made prior to 1999.
Drawing
RADIO-KIT005

Manaras plug-in receiver for Board 60 or electromechanical operators 390 MHz *** To extent of inventory

  • Direct ECB plug-in receiver card kit (RADIO RE100B) for on-site installation.
  • Maximum 16 transmitters per receiver.
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
Programming Instructions
8331.96

Whiting Brush Top Seal assembly 96"

  • Fits Coldsaver and Tempguard
2237.096

Whiting Coldsaver Intermediate Panel 13-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 4 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 512 per channel (set by dip switches)
    • .......more details
Programming Instructions
1336.2

Whiting Roadside Top panel Closure Bracket 10" Raduis

8833TC

Allstar 3-btn 9-Door Transmitter 109023 318 MHz ***Replaced by P-8833TC

  • Open/Close remote for 9 doors
  • Compatible Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door trio to operate
  • Power: 9-volt battery
    • .......more details
Programming Instructions
HAE00032

Linear 8ft Chain Assembly (HCT8)

HAE00023

Linear 7ft Belt & Inner Slide Assembly (HBT7)

1920.1

Whiting Stainless Steel Top Closure Mounting Plate for Insulated Doors

1001-14-GREY

Commercial Side & Top Weather-Strip 14' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
4001-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1009-1-3/4"

Bottom Nail-On for Wood Door Heavy Duty per foot

  • For 1-3/4" commercial doors.
  • Color: Black
1019-1-3/8-24'

Rigid Vinyl Bottom Retainer Flat 24' Long

  • Black - for door thickness of 1-3/8"
1014-1-5/8-10'

Rigid Vinyl Bottom Retainer Notched 10' Long

  • Black - for door thickness of 1-5/8"
1015-1-3/4-24'

Rigid Vinyl Bottom Retainer Raised Centre 24' Long

  • Black - for door thickness of 1-3/4"
1015-1-3/4-14'

Rigid Vinyl Bottom Retainer Raised Centre 14' Long

  • Black - for door thickness of 1-3/4"
1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1006-1-1/2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1004-2-24'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 24 ft***Actual Length 24'4"***

  • For door thickness 2"
1003-1-3/8-16'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
7001-14-BROWN

Commercial Side & Top Weather-Strip 14' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-8-BROWN

Commercial Side & Top Weather-Strip 8' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1104-16FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 16' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-7FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 7' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-12FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 12' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-14FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 14' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
18-RWB-PAIR

Winding Bars Round 18" Set of 2

  • Cold rolled hardened steel.
  • Machined to 7/16" at one end with 1/2" outside dia. on the other.
  • Sold as a pair.
1104-12FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 12' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
1104-12FT-SAND

Residential Side & Top PVC Weather-Strip with cap 12' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
7001-8-WHITE

Commercial Side & Top Weather-Strip 8' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1106-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

  • Aluminum retainer with black dual fin vinyl
1102-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1001-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

  • Aluminum retainer with black dual-fin vinyl
1001-10-GREY

Commercial Side & Top Weather-Strip 10' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
32-48-240

Extension Spring 8' Door - 240 lbs Blue ** Replaced by 27-48-240

  • Double - Loop
  • 32" long 48" stretch 240 lb load
  • Springs sold individually
Spec Sheet
32-48-200

Extension Spring 8' Door - 200 lbs Tan ** Replaced by 27-48-200

  • Double - Loop
  • 32" long 48" stretch 200 lb load
  • Springs sold individually
Spec Sheet
32-48-80

Extension Spring 8' Door - 80 lbs Gold ** check for availability

  • Double - Loop
  • 32" long 48" stretch 80 lb load
  • Springs sold individually
32-48-50

Extension Spring 8' Door - 50 lbs Red ** check for availability

  • Double - Loop
  • 32" long 48" stretch 50 lb load
  • Springs sold individually