Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
32-48-300

Extension Spring 8' Door - 300 lbs Tan ** Replaced by 27-48-300

  • Double - Loop
  • 32" long 48" stretch 300 lb load
  • Springs sold individually
Spec Sheet
25-42-170

Extension Spring 7' Door - 170 lbs Orange

  • Double - Loop
  • 25" long 42" stretch 170 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40040
  • Cross Reference: W #8280
26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
H11G09

Hinge #9 x 11 gauge

  • 11 gauge # 9 hinge - 0.90 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
903021ORBG

Operator Reinforced Bracket 21" Galvanized

  • Comes with clevis and clip pins. 24 per carton
6X16PO50

Devanco Loop 6' x 16' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
6X10PO50

Devanco Loop 6' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
OPH-6112-CONT-L

Manaras Opera-H 1/2HP 120V 1Ph with Mechanical Contactor Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
UNI-100-142

Uni-Size Bottom Weather Seal 14'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
1104-7FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 7' Long - White (W)

  • White rigid vinyl retainer with white flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
PRO-GHC-10021U-R

Micanan 1 HP 230V 1P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
Installation manualSpecification sheet
.421_3-3/4"-LH

Torsion Spring .421 x 3-3/4" x 12ft LH Gold

  • Wire size: .421
  • Inside diameter: 3-3/4"
  • Length: 12 ft
18004B

Genie Motor Start Capacitor 220VAC 50-60 MFD

  • Compatible with most 1/3 HP Genie & Overhead operators
MOUNTSHAFT018F

Manaras Limit Shaft Kit for MTH MTBH MJH MSJ

  • Limit Shaft Kit for OLD STYLE MTBH/MJH/MSJ Operators
  • 5/8 - 24 10" limit shaft
  • For MSJ built before 2012 (green control box)
Drawing
MD00382

Micanan Roller Chain #41 49 Pitch Drive with Link

  • For PRO T/TB
TC134-9

Top Cap 1-3/4" 9 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
2235.096

Whiting Coldsaver Bottom Panel 14-1/2" x 96" with seal and retainer

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
OGH-6435-ECB

Manaras 1-1/2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
Q085

LiftMaster Dolly Cover HCT K09-50756

  • Same as K09-50756
6X15SC50

Devanco Loop 6' x 15' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
OHJ-6432-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 480V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OHJ-6533-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 600V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
3AG2

Miniature Fast Acting Glass Fuse 2 Amp 250V (5/pkg) - 766122

  • 6 x 30mm miniature fast acting glass fuse
  • Rated voltage: 250V
  • Rated current:2A
  • ROHS compliant
K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual
GALV-234-2-LH

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
110635.0001.S

Overhead Electric Motor RSX 1/2HP 115/208/230V 1-Phase

7001-12-ANODIZED

Commercial Side & Top Weather-Strip 12' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
PRO-GT-7553-U

Micanan 3/4HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

SL332COP

Copper Sleeve 3/32" 100 Sleeves per Pkg ** Price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST332COP
.207_2"-RH

Torsion Spring .207 x 2" x 12ft RH Brown

  • Wire size: .207
  • Inside diameter: 2"
  • Length: 12 ft
MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

  • Activates one device
  • Wire lead antenna
  • Mounting bracket supplied
  • Memory: storage for up to 10 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
.273-3-3/4-LH-C

Torsion Spring .273 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 3-3/4" Length: 12 ft
.207-1-3/4-RH-C

Torsion Spring .207 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .207 ID: 1-3/4" Length: 12 ft
MA033

LiftMaster Hardware Kit Only for Articulating Arm ** Arm Not Included

  • Hardware kit for articulating arm models MA024 and MA034
  • Articulating arm hardware kit
  • Arm sold separately
1104-10FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 10' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
1003-3-DF-CUT

Bottom U-Rubber 3" Dual Fin Black Sold per Foot

  • Sold in cut-lengths per foot.
  • Dual fin
27-48-110

Extension Spring 8' Door - 110 lbs White

  • Single - Loop
  • 27" long 48" stretch 110 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
E/1929/025

Automatic Systems Bumper and Limit Switch Ass'y (BL229)

  • Used on the BL229 gate op.
K07-8004

LiftMaster Upper Crank Link BG770/790 Barrier Gate

  • For use with BG770/790 barrier gate operator
K07-8003

LiftMaster lower Crank Link BG770/790 Barrier Gate

  • For use with BG770/790 barrier gate operator
K15-50B18QGX

Output Sprocket for SL595 and SL595UL

  • This is a replacement Output Sprocket. Compatible with LiftMaster® Model SL595U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
MM00078

Micanan Solenoid Lever Limited Duty MSI0094

2100-917-UPS

Linear Shaft Output 1" HSLG UPS

2400-201

Linear Key 1/4" x 1/4" x 1-1/2"

GHX-311-3/4-LH

Doorlec Explosion Proof Gear Head 3/4 HP 120V 1PH ECB Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
MULTI-GROOVE

Garex Ready to Install Door Multi-Grooved Special Order

  • Available with a choice of simple and varied colors this textured woodgrain door will meet your style and requirements for quality and durability
  • R-16
114-0298

RW Support 18 x 33

  • Size: 18 x 33
  • Material: Formed Steel 3/16" thick
  • Finish Black Enamal
2510-430

Linear Box Power Assemly SW/SL 230V Apex

  • The 2510-430 is a replacement Linear 208/230V Power Box Assembly
  • Input Voltage: 220/230/240 AC (60 Hz 1 Phase)
2100-0054-UPS

Linear Bolt #41 Chain Tension

  • Used on various Linear Gate operators
SBR-N1-0R-H120

Micanan Brake Assembly for PRO-HBH RH 120V Solenoid included

  • Solenoid Included
24040

Doorlec Roller Chain #40 Sold per Ft

2200-215

Linear Precision Bearing 5/8"

LB610-102

Laminated Bumper Standard Black 102" x 10" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
K41-0095-000

LiftMaster DC Motor Drive HD Gate

  • This service kit is compatible with the following models: HDSL24UL & HDSW24UL
SUPPORT008

Manaras Board Support 1" ** Special Order Only

E/1929/236

Automatic Systems Rod Assbly w/2 Rod Ends (BL229)

  • Used on the BL229 gate op.
27209

Doorlec Electric Motor TEFC 3HP 208/480/575V 3-Phase DC333C

  • Frame size is 56C
MQ00009

Micanan Set Screw 1/4"-20

TS-1-135-GALV-KEY

Tube Shaft 1" x 135 (11'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
KW011

Keystock 3/16 x 1"

  • Sold per piece
BPPN17524

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 289" (24')

26141-NEW

Doorlec Cam Shaft 11-1/4" x 5/8" (28.575 x 1.59cm)

  • Fits the new larger box
GAREX-24X12-GLASS

Garex Thermo Window Clear 24" x 12" Glass Only

  • An original Garex glass No frame
H11G06-SS

Hinge #6 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
P-50H

End Plug for 1/2" ID Rubber Air Hose w/ Center Hole Qty 1

  • Sold per plug
K41-0256-000

LiftMaster Interlock Harness IHSL24UL

BCSI-PM07

Pivin Drapeau Lock Washer 3/8" *** Price by Quote Only

2300-697

Linear Idler Wheel UHMW

41A3589-2

LiftMaster 10ft Belt Assembly for Models '93-2000

  • For use with LiftMaster belt drive models 1270 1280 1280R.
  • Full belt assembly
  • For use with Chamberlain belt drive models 8100 8200 and 9200.
  • For standard 10 foot high garage doors
  • T rail assemblies ONLY.
20102

Doorlec Reversing Arm Spring

SPR50B42X114-3/8

Sprocket 50B42 1-1/4" shaft 3/8" KW 2SS 5/16-18

  • 42 tooth sprocket for #50 chain
GALV-331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
CLM125-H

Linear Credential Clamshell Card HID 125kHz Proximity Support 25 pk

  • Made of sturdy ABS plastic Off White
  • Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
  • Contactless: up to 8" read range
  • Supports printable 14 mil CR80 adhesive-back PVC cards
  • Sold in lots of 25
  • Same as: 830-00420
    • .......more details
99119671-PER-FOOT

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T Sold per Foot

  • 1/4" T width
  • Used on Amarr Residential Open Back Doors and Classica models
CPT-215-50

Miller Edge Field Configurable Sensing Edge 50 ft Roll

  • For do-it-yourself edges on sectional or rolling doors.
  • Black extrusion flexible PVC conductive polymer Ends: Molded polymer
  • End plugs and mounting channel sold separately.
  • Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
  • When combined with the ME123 mounting channel ideal for 2" thick surfaces
  • Lead Wire 12 in. 22 gauge SJTO
    • .......more details
GALV-234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

  • Compatible with various LiftMaster® Swing Gate Perimeter Access Systems
SCREW002

Manaras 1/4"-28 x 1/4" Set Screw

GALV-406-6-144-R

Torsion Spring .406 x 6" x 12ft RH Galvanized Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
CGH303L5-RH

LiftMaster Gearhead w/Carwash Mod. & Brake 3 HP 208/230/460V 3P L5 Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
20W33A

LiftMaster Solar Kit 33-AH 12V ***Kit includes: 1x SP20W12V 1x A12330SGLPK & 1x K94-37236***

  • Kit includes: SP20W12V (1) SOLAR-PANEL KIT12V20W A12330SGLPK (1) BATTERY 12V33AHSINGLE K94-37236 (1) UNIVERSAL SOLAR HARNESS KIT-7AH & 33AH
  • Compatible with: RSL12ULMC gate opener
OTBH-6534-M-N1

Manaras Trolley Operator 1 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
OSH-6114-M-N1-LH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
OTBH-6532-M-N1

Manaras Trolley Operator 1/2 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
OSH-6434-M-N1-LH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
K79-13493B-500

LiftMaster Logic Control Board Assembly (FDO FCC LMPLC 500V CHIP)

  • For use with various LiftMaster® Commercial Door Operator Models
MOTOR337

Manaras Electric Motor 3/4HP 120/240V 1PH

  • C-flange continuous-duty
  • For gearhead operator
MD-00242

Sprocket 41B14 x 3/4"

Q521

LiftMaster Wiring Harness Kit CSW-DM K94-50287

  • Compatible with LiftMaster® Model CSW200UL Swing Gate Operators
  • Also known as: 94-50287 K94-50287
DW-HOSE-CONN

Copper Air Hose Connector 3 x 22mm with Collar *** To Extent of Inventory

  • For use in DW-3S and DW-TR air switches
343

Cable Clamps Galvanized 3/8" Sold per piece

  • Galvanized malleable cable clip
SHAFT028

Manaras FDGHE Cam Shaft 5/8"-18

70600.000

Todco 2" Nylon Sealed WondeRoller

  • Special Order Item
  • Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
  • A fully sealed bearing to keep dust and debris out
  • 2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
  • Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
  • Roller prevents build up in bearings with a sealed external washer
    • .......more details