Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
AK-21

Linear Interior Digital Keypad***to extent of inventory

  • The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
  • It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
  • Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
  • Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
  • The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.
Installation Manual
OMH-6112-ECB-RH

Manaras Opera-MH 1/2HP 120V 1Ph with Electronic Circuit Board

  • A medium-duty operator designed for use on standard high and vertical lift sectional doors and grills.
  • 14 cycles per hour 50 cycles per day
Installation ManualSell Sheet
CARSENSE-101

EMX Buried Driveway Alert Sensor XC101-LV Probe Sold Separately (CS101)

  • The CarSense 101 provides a solution for many vehicle detection challenges. Where safety is an issue the CarSense 101 detects moving vehicles in blind areas along a driving path and actuates warning lights.
  • For access control applications requiring free exit the CarSense 101 detects vehicles and actuates gates overhead doors and other parking barriers.
  • Controls and indicators are mounted on front panel
  • Available in 9 - 41 VDC 6 - 29 VAC.
  • Low 2.5 mA standby current consumption makes it an excellent choice for solar power applications.
  • Housed in a small relay-type housing
    • .......more details
Installation ManualSell Sheet
CBS-338

Center Bearing Support 3-3/8" 8-gauge with Bearing Sold per Piece

  • Heavier gauge allows for use in both 2" commercial or 3" industrial applications
  • Sold per piece
  • For 1" shaft
  • Double clipped ends
RBH751L5-LH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
RBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
41A6408

LiftMaster Travel Module (8500 3800P 3800PLD & 3900) - 41B8861

  • Works on model 8500
Programming InstructionsInstructions de programmation
CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

  • Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
  • Polarized photo-eye design for a safe retro-reflective photo-eye system
  • Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
  • Range up to 30 ft - indoor use only
  • 24VAC operation
  • Color: Yellow
    • .......more details
Installation Manual
AUXCARD

LiftMaster Auxiliary Relay Option Board

  • Provides additional contacts for and control of auxiliary devices such as external heaters security devices or warning devices
  • 5V to 240VAC
Programming Instructions
510.5377.00

Whiting Side Seal Option for Dry Freight Door

  • A extra option when ordering a Dry Freight door
  • When purchased alone use part number 5377.115
PED42

Pedestal Post 42" Gooseneck Pad Mount

  • Black powder coat finish
  • Faceplate with universal hole pattern to fit almost any access device
  • 2" x 2" square post
  • Neck is bent with 6 in. center radius giving a tight professional look
  • Same as G559
69625

Marantec Programming Connector

  • Programming connector for use with M3 remotes and Wireless Keyless Entry. Also used with M13 Wireless Keyless Entry
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
Programming InstructionsInstructions de programmation
25-10301

Truck Door Heavy-Duty Cable Anchor Bracket Black for Whiting Roll-Up Doors

  • Steel construction
  • Allows proper rotation of cable head
  • Cross ref: Whiting 5803
BK100

Spring Anchor Bracket Mini USA Sold Individually

  • Adjustable residential center bracket
  • Bright zinc plated 12 gauge steel
  • Adjustable bearing plate
  • For 1-3/4" to 2-5/8" ID springs (Adjustable center line 2-3/8" to 4-1/4")
  • For use with steel or nylon bearings
  • Bearings NOT included
    • .......more details
302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

  • The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
  • The 300 MHz frequency is compatible with standard Multi-Code transmitters
  • The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
  • Operates on 12-24 volts AC or DC power
  • Two channels
  • Whip antenna
    • .......more details
Programming Instructions
MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

  • The MGT is the industry’s only fully supervised gate safety edge transmitter.
  • It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
  • Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
  • Features Include:
  • Signals access controller for stop or reverse when safety edge activates
  • No cables or coiled wires
    • .......more details
Programming Instructions
195LM

LiftMaster Ceiling Mount ***Discontinued***

  • Designed to fit most standard garages
  • Black powder-coated finish hides wires and cords for a cleaner look
  • Mounts parallel or perpendicular to rail
  • Adjustable height to fit most ceilings
  • Hangs 6.5 to 24 inches down from ceiling
Installation ManualManuel d'InstallationSell SheetBrochure
50-104-1

Black Coil Cord 2-Wire 18-ga 20 ft. Extended Curly Cord

  • Retracted Length=4 Feet Extended Length=20 Feet 2 Wire 18 Gauge Cord Type SJEO
TUBE_SHAFT_17FT

Hollow Shaft 1" x 17-0" Galvanized 16 gauge

3-42-2A

Bottom Bracket with Removable Roller Carrier Commercial 3" 1-Hole BB-6 Pair *** To extent of inventory

  • Sold as a pair (1-left and 1-right)
  • 11-guage
  • Dimensions: 4-1/2" W x 11" H x 1-3/8" D
10FT-I-BEAM

LiftMaster 10' chain drive rail 3710CH / CD1010

  • I-Beam chain rail for 3595 & ATS
  • Space required: 2" above heighest point of travel of the door
855LM

LiftMaster HomeLink Repeater Kit

  • This kit contains a repeater and a transmitter
  • The HomeLink repeater is only compatible with HomeLink equipped vehicles
Programming Instructions
PHOTO-061

Manaras Monitored Photoelectric Cells N4X (Fraba)

  • Monitored NEMA 4X enclosure through-beam type photocell
  • 4-Wire
  • Suited for industrial environments
  • Range: 45 ft
  • Supplied with 3ft of wire
Installation Manual
HD-15

Reflector Hood for 3" Round Reflector

  • Black/Charcoal
8010-3FT

Bottom Sweep for Entrance Door White ** No Longer Available

  • Height adjustable
  • Vinyl: White
  • Length: 3 ft
41DJ002

LiftMaster Circuit Board with Plate for 8500

  • Board: Security+ 2.0 for DC Jackshaft Model 8500
  • 5 year warranty
828LM

LiftMaster Internet Gateway Sec+ 2.0

  • Monitor and control your garage door opener from anywhere in the world right from your smartphone or computer
  • Easy and fast installation through your in home router.
  • Only works with new MyQ compatible Garage door openers
  • Controls up to 16 garage doors gate operators or MyQ-Enabled devices.
Programming InstructionsInstructions de programmationSell SheetBrochure
380LMC

LiftMaster Remote Work Light

  • For use exclusively with the LiftMaster Wall Mount Garage Door Opener (model 8500)
  • Provides 200 watts of light with adjustable light time delay
  • Lights are controlled by opener activation or control panel light button
  • Add as many lights as you wish – perfect for brightening up a dark garage or workspace
Installation ManualManuel d'InstallationTroubleshooting
R-831-P

FL-Allstar 1-Door O/C/S Receiver 107480-311 MHz***NLA

  • This receiver comes in a metal enclosure.
  • It has three isolated contacts to open close or stop the door. If your operator can be controlled by three button station then our R-831-P receiver and commercial remote controls will work with your operator.
  • Manufacturer's model number: 190-107480
  • Dimensions: 9 1/4" x 6 7/8" x 1 1/4".
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
22-240

Brake Solenoid 230-240V

  • Used on all brands of commercial door and gate operators
  • 2 wire connection
15-41B32LGH

Sprocket 32 Teeth 1" Bore 1/4" Keyway

  • Sprocket for #41 chain
T3B-OCS

Lynx 3-btn O/C/S Transmitter 303 MHz

  • Ultra secure mid-size transmitter does not have dip switches.
  • 3 button (Open/Close/Stop)
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Must be used with Lynx OCS receiver for o/c/s functions
  • Visor clip and 12V battery included
Compatibility chart
BRAKEPART018

Manaras Brake Shoe Assembly Kit

  • Kit includes SHOE001 & SHOE002 for old brake system.
  • Fits all Manaras operators except gear head made prior to 1999.
Drawing
HAE00018

Linear Inner Slide Assembly - Chain (HCT)

  • For LSO50 LDO33 & LDO50
HAE00047

Linear Complete Gear Set with Grease

  • Set includes: Helical gear worm gears and grease
  • Helical gear measures 2-7/8" diameter
DR

Linear 1-Ch DR3A Delta3 Receiver 310 MHz

  • 310 MHz frequency 8 dip switches for coding 256 possible codes
  • 24V AC/DC input power 3 terminal connection
  • Activates one device
  • Dimensions: 5.5" W x 4" H x 1.25" D
  • Same as: DNR00001
Installation Manual
24-RWB-PAIR

Winding Bars Round 24" Set of 2

  • Cold rolled hardened steel.
  • Machined to 1/2" at one end with 5/8" outside dia. on the other.
  • Sold as a pair.
7001-7-WHITE

Commercial Side & Top Weather-Strip 7' Long - White 7001-WW (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
412HMC

LiftMaster Single Channel Co-axial Radio Receiver 4 Wire 390MHz

  • 390MHz universal coaxial receiver for Open/Close
  • Will accept 15 remotes on "High Security" or 31 remotes on "Normal security"
  • 8" wire antenna included (part #41C3196)
  • Input voltage 12-24V AC/DC
Programming InstructionsInstructions de programmation
DM518

Cable Drum Standard Lift 18' 5250-18 Pair

  • 18' standard Lift aluminum die cast alloy.
  • Pair includes: (1) LH and (1) RH.
  • Color coded: Red=LH and Black=RH
  • Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
  • Max. Cable Diameter: 3/16". Mounting: 1" solid shaft with 1/4" keyway
  • Cross Reference: D525-216-1 DNS 5-18 OMI 2200
    • .......more details
CHS401

Chain Hoist Shaft Mount 4:1 JR 4020 Torque Force (126684)

  • Shaft Mounted Junior Hoist
  • 4:1 Reduced Drive
  • Sprocket: 41B36. Bore size: 1" diameter
  • Cross Reference: OMI 4020
  • Requires minimum 3/8" center line offset.
  • Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.
    • .......more details
Sell sheet
Z9900

Leaf Bumper Spring with bracket Sold as a Pair

  • Leaf spring with bracket and safety strap.
IRB-4X

EMX Industries Nema 4 Through-Beam Photocells with Hoods *** No longer available

  • Outdoor and carwash through beam Commercial Photocells.
  • Up to 115' sensing distance
  • Electronic sunlight filter
  • Automatic compensation for temperature changes
  • 12 to 24VAC/DC input voltage
  • one form C relay (NO and NC output)
    • .......more details
Installation ManualSell Sheet
D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

  • Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
  • Works with most LiftMaster gate operators
  • Won't work with Elite Series Mega Arm Slide & Swing
  • Simply plug it into the harness already in the operator
  • Loop lead-in wires connect to operator terminal strip
  • Gold plated control contacts
    • .......more details
Installation ManualSell Sheet
CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

RADIO-50

Manaras MCT-32 3-btn O/C/S transmitter 32 doors 313 MHz ** Replaced by RADIO-EM932

  • Open/Close/Stop remote for 32 doors.
  • By selecting A B C or D on the rotary switch and 1 to 8 on the other you can operate any of the 32 doors.
  • Comes with LED battery life indicator and 9V battery.
  • Can be wall or post mounted.
  • Must be used with 32 MCR series receivers.
Programming Instructions
CSL24UL

LiftMaster New 24VDC Commercial High Traffic DC Slide Gate Operator

  • Battery Backup: 208 cycles or up to 24 days of standby power when the power is down
  • Security+2.0®: Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used
  • MyQ®: Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app
  • Soft start / stop extends operator and hardware life in high-cycle and heavy-gate applications
  • Wireless dual-gate communication eliminates expensive conduit costs and unsightly driveway scars
  • Keyed manual disconnect when unlocked allows gate to be operated manually.
    • .......more details
Installation manualManuel d'installationSell sheet
DCWALLCTL

LiftMaster Floor Level Wall Controller with LCD Display

  • Compatible with LiftMaster MAXUM Commercial Door Operators.
  • 4-line LCD display gives you access to more information at all times
  • Bringing programming troubleshooting and Diagnostics down to the floor level will save you time and money
  • Menu based user interface allows you to scroll through edit and save options and settings easily.
  • Dimensions: 3.586” W x 8.166” H x 1.732” D
CORNELL-RS-DOOR

Cornell Rolling Steel Door Made to Order Price by Quote Only

29200

Doorlec Transformer 208V pr 120V sec 35VA

  • 208V prImary 120V secondary 35VA
TRANSF112

Manaras Transformer 575V-24V-50VA

K72-12506

LiftMaster Clutch Shaft Kit (1/3 & 1/2HP)

  • For 1/3 and 1/2 HP models - L5
BGARM

LiftMaster 10' Arm only for Techna Barrier Gate

  • For use on Techna gate operator
SW-500

Devanco Industrial Spring Winder 500 for 3.75" - 6" Torsion Springs

  • W-500 is an Overhead Garage Door Torsion Spring Tensioning Tool for commercial and industrial sectional doors with springs ranging from 3.75" to 6". It can accommodate both 1.0 and 1.25 diameter shafts. This device prevents work-related accidents and significantly reduces physical strain during the torsion spring cranking process The SW-500 is designed for use with a cordless drill (Non-impact) with a 13mm socket to make the job faster and safer than using winding bars. ***Richard Wilcox springs require the SW-500-ADAPTER. Technical Specifications:
  • Weight: 8.6 kg / 18.9 lbs
  • Length: 77.2 cm / 30.39 inches
  • Max. Torque: 369lb/ft
  • RPM: 500-2000
  • Material: Aluminium steel plastic
    • .......more details
Sell Sheet
31226

Doorlec Sprocket 41B48-1" shaft

TM1-PLUS

Programmable Timer

  • 6 modes of operation : Delay on operate Delay on release Latching #1 Latching #2 Pulsing #1 Pulsing #2
  • Adjustable from 1 second to 4 hours with programmable dip switches LED status indicates when timer function is active
  • Microprocessor based / controlled clock for accuracy of 2%
  • Operates on a power supply of 12vdc or 24vdc
  • SPDT relay output : 5 amp 24vdc contacts
CRBH505L5R

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
IP-MDS

CDVI Point of Entry Exterior Multi-Tenant Surface Mount Video Intercom System

  • Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
  • Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
  • Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
  • IP54 (recommended to be put under a canopy or covering)
  • Operating temperature: -10C to 50C
  • Stainless steel panel
    • .......more details
OGH-6535-M-N1-RH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
SHAKER-XL-R16

Garex Ready to Install Door Special Order

  • Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
  • Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
  • Panel Width: Up to 24 feet (732 m)
  • Texture: Woodgrain
  • Offered in various choices of colours
MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: 70 milliseconds
    • .......more details
Installation Instructions MWT12BSpec Sheet MWT12BFAQ MWT12B
041-0400-000

LiftMaster Door Shaft Collar

  • Fits with LiftMaster model #98032
31373-114

Doorlec Sprocket 60B36 1-1/4" Bore

XF600VAC12

LiftMaster 600V Transformer Kit 1200

  • For use with various LiftMaster® MAXUM Series DC 1200 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators
  • will supply a maximum of 12.5 amps on 120volts
2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

  • Fits HSLG GSLG-A Ups
RSH-6814-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
GALV-295-6-144-R

Torsion Spring .295 x 6" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
BEA-10EARA

BEA Rain Hood for Eagle Artek Black

  • Rain hood only
BEA-10EAGLE-ARTEK

BEA Eagle Compact Motion Sensor 6'-13' Mounting Height

  • EAGLE ARTEK is a motion sensor for all types of automatic doors. Its slim and compact design ensures discreet integration for your application making it ideal for pedestrian doors.
  • Superior field performance with improved filters that help to reduce false detections.
  • Easy to install and set up with flexible parameters and simple push-button settings. •The detection field can be adjusted without manually adjusting the antenna.
  • Max. detection range: wide: 13’ × 6.5’ narrow : 6.5’ × 7’ (@ 7’ high)
  • Temperature range: -4 – 131 °F (-20 – 55 °C)
  • Cable length: 8’
    • .......more details
Installation manualSpec sheet
T-931-S

FL-Heddolf 1-btn Transmitter 311 MHz

  • Also known as 311DEK31V2
Installation manual
CHAIN061

Manaras #410 - 1R26P (Incl. 1 C/L) 13" Long

BCSI-PM504

Pivin Drapeau Limit Shaft Kit BCSI Gate Operator ** Price by Quote Only

  • Includes: Switch Shaft Bearing Plate
FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

  • The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
  • The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
  • Control Board: model 780D
1440-2-WHITE

Elton Residential Window for Flush Doors 2" thick Door 1440 White Frame Sealed Clear Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 42 5/16” x 14 1/4"
  • Cut-out size: 41 11/16” x 13 11/16”
  • Vision area: 39 11/16” x 11 5/8”
  • Different glass options and frame colours are available upon request
    • .......more details
ETBH-353-1

Doorlec 1 HP 575V-3Ph Trolley OP

1050-STANLEY

Stanley 1050 Transmitter 310 Mhz 10 Dip Switch

  • Replaces 2-btn Stanley original remote
R1P

Erone Radium + Paradox 1-Channel Key Chain Transmitter 433MHz

  • Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
  • The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
  • A special algorithm allows to keep synchronized transmitter and receiver.
  • Range up to 250 m (820 ft)
  • Ergonomic rugged & durable
  • Battery: Two 3V lithium battery (CR2016)
    • .......more details
Wireless System Chart
K41-0072-000

LiftMaster Relay Adapter Board HD

  • Compatible with the following models: INSL24UL INSL24ULMC
WASHER035

Manaras Belleville Washer 31.5 x 16.3 x.08mm Zinc Plated

  • Used on serveral models
MA010

LiftMaster Gate Arm Bracket

  • Designed for use on all Mega Arm gate openers
  • Bracket will work with either right-hand or left-hand operation gate arm.
50-CP4

LiftMaster Sensing Probe Free Exit 100ft Lead

  • Self-contained free exit system designed to detect moving vehicle and open your automatic gate.
  • Can be installed above or below ground
  • Connects directly to any gate operator without an external output board.
  • Works with powered or solar gates.
  • SPECIFICATIONS: Cable Lead Length: 100 ft.
  • Power Requirements: 8-24 VAC oe 8-30 CSX
    • .......more details
Installation Manual
MAX-ROLL-DOOR

Max-Roll Rapid Rubber Door Custom Order Price by Quote ONLY

  • Safe durable and easy to maintain.
  • For industrial commercial & institutional usage.
  • Quality materials & components at the forefront of technology.
  • Each door is custom ordered price by quote only
PRO-GH-30053U-RH

Micanan 3 HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Universal Right or Left Hand mount
    • .......more details
TNR-HDXL-CUSTOM

TNR Doors Extra Large Rubber Door Price by Quote Only Made to Order

  • Suitable for applications up to 55 feet wide and 35 feet high
  • Self-supporting channel steel C10 & flatbar mounting assembly
  • Knock-away double angle steel bottom bar for 15lb/ft with rubber loop and reversing edge
  • Frame mounted thru-beam photoelectric sensor
  • High-Efficiency Heligear Head (HG) Operator with multi-function PLC panel
  • Door speed of up to 12 inches per second
    • .......more details
RS-55

Roller Shutter Aluminum Model 55 Made to Order Pricing by Quote Only

  • The RS-55 is designed for use in large window roller shutters door recesses and small shopfronts.
  • Robust construction ensures high profiles rigidity while maintaining a well-shaped proportional appearance.
  • The RS-55 profile is available with or without perforation in a wide range of RAL-like colours.
  • The profiles have a very good colour fastness and high resistance to abrasion.
  • This profile is resistant to weathering.
  • Aluminium profiles are ecologically clean products.
    • .......more details
CHI-FS-7522

CHI Fire Shutter 7522 ** pricing by quote only

  • Door meets 45-minute 90-minute and 3-hour UL ratings with full compliance to NFPA-80 standards.
  • Standard curtain provides a 1 ½” pre-painted hot dipped galvanized steel slats.
  • Smooth quiet drop testing thanks to a durable viscous governor.
  • Simple drop-testing and ability to reset the door which makes for quick operational readiness.
  • Standard bottom bar slide bolt locks with an optional cylinder lock.
  • Slat Thickness: 22 gauge Flat slats
    • .......more details
CELLOPENER-365

EMX GSM Access Control & 365 Day Timer 2000 Users EMX-5431-1

  • Up to 2000 Programable Users
  • Weekly & 365 Day timer
  • AutoAdjust for Day Light Savings Time
  • Remote Programming From Anywhere in the World
  • GSM SIM Card Included
  • Cell Phone SMS Activation Required
    • .......more details
LJH-311-1/2-RH

Doorlec 1/2 HP 115V 1PH Jackshaft Operator Right Hand

  • CSA approved
  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
    • .......more details
Technical information
O02R9502

AirLift Rebuild Kit Orig. Op. w/Brass Nut

CAPXLV

LiftMaster Smart Video Intercom - L

  • LiftMaster’s cloud-based video intercom for multi-tenant residential properties.
  • The intercom allows residents to see their visitors through live video and grants access to the building via the MyQ app
  • Display and interface – 10” color display with touchscreen
  • Connectivity – WiFi cellular wired high-speed DSL
  • Audio capabilities – Voice over IP – digital call quality with no long-distance charges
  • Video capabilities – One-way video calling with a 135-degree view
    • .......more details
ZAP-8800

Zap 8800 Series-3 Opener

  • ncludes: (1) 8825-3-(pulley size TBA) c/w motor head assembly and control box
MIC001

Manaras Internet Control Device Modification (Op has to be compatible)

  • The internet control device allows you to control and monitor your garage door from anywhere using the MIC app and your smart device
  • Includes the MIC device and Wi-Fi compatible board & software
  • Must be purchased and used with a Manaras monitored operator
RADIO-EM102

Manaras Mini 3-btn Rolling Code transmitter 390 MHz

  • Field Configurable
  • Hand Held or Keychain three button
  • Rolling Code Technology
  • 1 Door (SD) Open/Close/Stop or Multiple Doors (MD) 1-3 single-button field selectable
  • Config. Trad. Comm. Sesquence or Alternating Sequence (SBC) Open/Close/Stop (with ECB)
  • Nema 1
    • .......more details
Manual
K94-37694-3

LiftMaster Electric Motor SL585U 1.5 HP

  • Replacement motor for SL585151U
WB-350

Skylink Multi-Function Wall Console New ATR Model Ops

  • For use with the Skylink ATOMS AT series garage door openers.
  • Oversized Push Button for activating the garage door opener.
  • Activate opener light on/off and the light will remain on until the button is pressed again.
  • Feature with Lock function to ignore all radio signals for added security.
  • Illuminated LED indication.
  • Easy to Install.
    • .......more details
EHJW-311-1/2

Doorlec Ind Jackshaft Op. Watertight ECB 1/2 HP 115V-1Ph

  • Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
PTM-24V

EMX 7 Day Programmable Timer 24V

  • The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
  • With up to 16 ON/OFF events per day and 15 different daily options.
  • Its DIN rail mount design and wide power supply options (12 or 24 Volt) make installation easy.
  • The battery backup saves stored programs in the case of power loss.
  • Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
  • The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.
    • .......more details
Instruction manualSpec sheetComparison guide
RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

  • The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
Installation manualSpec sheet
SL595151UL

LiftMaster Dual Voltage Slide Gate Op.1.5 HP 115/208/230V 1 Phase - Heater NOT Incl.

  • Power: 115/208/230 VAC. Single Phase.
  • Accessory power: 24VAC 500mA max.
  • Monitored safety inputs: 3 Main Board 3 Expansion Board.
  • Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
  • Gate travel speed: 12 in. per second.
  • Security+2.0® on-board radio receiver: Up to 50 remote controls (unlimited with 811LM/813LM).
    • .......more details