Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

BOARD070ER

Manaras Replacement Control Board (No Monitoring)

  • On-board 390MHz radio receiver accepts 50 remote controls
T105L5

LiftMaster 1 HP 575V 3p Commercial Trolley Operator Logic 5

  • Low profile trolley operator with brake included
16-5L300

LiftMaster Cogged Vbelt 5L 30"

K1D7545CC

LiftMaster Control Board Assembly for LA500 ** To Extent of Inventory

  • 014D1065G
K76-36398

LiftMaster Electric Motor 1/2HP 24VDC for CSL24V / CSW24V

  • Replacement motor with improved brush assembly for CSL24V and CSW24V gate operators
10-30701M

LiftMaster Chain Guide Tray for SL595

  • The tray located between the 2 chain guides.
  • Chain guides are not included.
37845R

Genie Screw Drive Carriage Assembly

  • Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
  • Works with Screw Drive Shuttle assembly part # 36664R - sold seperately
34516R

Genie Chain Glide Inner Slide ML Series with Magnet

  • For ML Series with Magnet: 350ML 500ML 700ML 800ML
MX00150

Micanan Complete Clutch Shaft Assembly for PRO-HHD

803

Fasteners Sleeve Anchor 3/8" x 3" 50/Box

  • Secure anchoring into concrete brick or block
APOW3

LiftMaster Transformer 120V input 34VDC output

  • Plug-in AC/DC converter
  • Used as a replacement transformer for all LA400 models
02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

  • Single Pull Switch Control
  • Hazardous Area Overhead Mt. (NEMA 7/9)
  • Die cast hazardous area enclosure
  • May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
  • WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.
  • .......more details
MA022

LiftMaster Arm Bolt

  • For use on Mega-Arm gate operator
  • Sold individually
  • 5/16-18 x 29" hex head
766

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/2" 1000/Box

  • Full length thread
  • Max torque = 6
794

Fasteners Keps Nut 5/16-18 1000/Box

  • Lockwasher & nut combination
765

Fasteners Serrated Flange Nut 3/8-16 1000/Box

  • Serrated flange face to provide locking
776

Fasteners Hex Head Bolt 1/4-20 x 1" 1000/Box

  • 1/4" bolt has 7/16" head
  • Max torque = 6
  • Full thread
  • Grade 5
K75-18620

LiftMaster Limit Box Kit for SL595 ** Discontinued

  • Kit contains: Limit shaft Limit switch box Lid for cover Panel Adjustment plate Mounting bracket Limit shaft bearing Compression spring Spacer Nut Terminal box Hall effect kit Tinnerman nut double and e-ring
AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

  • AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
  • There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
  • The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
  • Battery is included # CR2032
MT22-YELLOW-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
19-5810

LiftMaster Trolley Chain Pack #48 for 10ft Door

  • Chain pack only
CH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4 or CPS-RPEN4 photoeyes
11-19471

LiftMaster Clutch Shaft

  • Fits model H operator with Logic 5
K001C8103-1

LiftMaster L5 Antenna

K001D8072-1

LiftMaster Single Phase Relay/Power Board (K001D8396-1)

  • For Logic 5 commercial operators
  • Same as K001D8396-1
  • 014D1276E
178B35

LiftMaster Curved / Bent Arm Kit (41B0035B)

  • Will work with most residential garage door openers
  • Also known as: 4178B0035B 178B32 41B0035B 4178B35 178B35 012385990357 178B35B
MOFR-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Receiver

  • Maximum sensing range is 20 meters
  • 11-Pin
  • 8 inch optical beam angle.
  • Waterproof for harsh environments i.e. water dust steam etc.
  • To be used with amplifier series S142
  • Supplied with 15 m of shielded cable.
  • .......more details
41AC075-2

LiftMaster Circuit Board Assembly for Dual Capacitor Models 315Mhz ** To extent of inventory

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
  • Also known as 41AB075-2 41AC075-2 041AC075-2A
1104-10FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 10' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
703-004

Eclipse Gel Connectors Red 20-26 AWG 100/Pkg ** To Extent of Inventory ** Repl by 86-925

12-000I-KEY

Spare Key for American Access Keypad

  • Spare key only for model 12-000I
1104-10FT-GREY

Residential Side & Top PVC Weather-Strip with cap 10' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
K74-34582-1

LiftMaster Plastic E-Box Assembly for LA500CONT

  • Plastic replacement box only
27-20113

Truck Door W-Style Spring Assembly Roadside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
8FT-CHAIN-LINEAR

Linear 8ft Chain Rail for residential openers (HCT8C)

  • 8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
21-10298

Transformer 100VA

  • Multitap Transformer 120/208/277/575V Primary 24V Secondary 100VA 50/60 Hz
  • Fused at 5A
TH827-24V

Erone 7-Day Timer 24V

  • 24V AC/DC input voltage with battery back-up
  • One "NO" contact and one "NC" Contact
  • Up to 8 ON and OFF switches a day (56 per week)
  • Easy to read LCD Display
  • Manual override button
  • Ideal to keep a gate open during the day
  • .......more details
41C2735

LiftMaster Chain and Cable Assembly CMC84

  • Fits a Sears Craftman CMC84 operator
12-000I

Secure Brands Keypad with Intercom Post Mount

  • Post mount with Intercom
  • RemotePro KP 26 bit wiegand output keypads
  • Available in three different mounting configurations: post single gang or flush.
  • All single gang RemotePro KP models are available with a silver aluminum faceplate.
  • A heavy duty metal keypad is used with all exterior models providing years of trouble free entry.
  • Post mount models feature a stainless steel faceplate in a heavy metal powder coated enclosure with nightlight.
  • .......more details
MK-00014

Micanan Reversing Relay 220VAC Coil DPDT (Flange Mount)

  • 8-pin
65853

Marantec Programming Wire - Old ML to New M3

  • Used when programming old style remotes to the newer style 3 series remotes and Wireless Keypads.
DF086.1

Whiting Dry Freight Door 3/4" with Track Balancer Standard Hardware and Side Seals

  • Includes side seal upgrade
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
305-153613

LiftMaster Idler Sprocket Assembly (K305-153613)

  • Fits SL595
G808001

LiftMaster Lock and Key Kit

  • Lock and Key Replacement Kit. Compatible with LiftMaster® Models BG770 and BG790 Barrier Gate Operators
  • Also known as: K808001 80-8001 808001
7470.093

Whiting Side Seal for Insulated Doors 93" Long

  • Fits Coldsaver and Tempguard
08-11012

LiftMaster Bevel Gear 5/8" ID

  • Fits LiftMaster GH operator
MJ7104

Doorlec Utility Switch 21800

  • Utility switch with a 'NO' and a 'NC' contact
  • Adjustable arm with roller
Z9405

Coupler 1-1/4" Bore Non-Adjustable

  • Malleable iron for strength
  • Set screws and jamb nuts installed
  • 1-1/4" Bore with 1/4" keyway
  • Length: 3.9"
WKP250LM3

LiftMaster Wireless Keypad 250-Code ** Replaced by KPW250

  • Wireless access control keypad
  • 250 code capacity - 4-digit codes
  • Wireless control of up to 4 doors or gates with additional GCUs
  • Post or surface mount standard
  • 900MHz
  • Compatible with GCU and LiftMaster® 315MHz rolling code receivers
  • .......more details
Z9003-MAX

Pusher Spring - 27" with 3" diameter Tip Sold as a Pair

  • Pusher spring 27" long with a large 3" tip. Sold as a pair
  • 11lbs of initial pushing strength per spring+ 3lbs per inch per spring
GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

  • Auto voltage sensing - no jumpers to set
  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 128 (set by dip switches)
  • RF frequency: 310 MHz
  • .......more details
302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

  • The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
  • The 300 MHz frequency is compatible with standard Multi-Code transmitters
  • The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
  • Operates on 12-24 volts AC or DC power
  • Two channels
  • Whip antenna
  • .......more details
K75-18364

LiftMaster Arm Assembly Kit for SW470

  • Complete arm kit for SW470 gate operator
15-50B18LGH

Sprocket 18 Teeth 1" Bore 1/4" Keyway

85LMC

LiftMaster Plug-In Power Supply

  • Plug-in jack for easy installation on Liftmaster receivers
  • Power input level: 105-135AC 24AC output
1A3982

LiftMaster Operator Splash-Proof Cover

  • For models: MH H HCT GH
  • For wall mounted operators 31" L x 19" W x 18" D assembly required.
BEARING005

Manaras Flange Bearing ID 5/8"

  • Flange bearing for 5/8" shaft
.283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PD86CNP12QPMU

Carlo Gavazzi Photoelectric Switch Retro Reflective 12-24V AC/DC

  • Reflector (ER4) not included
MOUNTSHAFT018

Manaras Limit Shaft Kit Opera

CABLE_1/8-SS

Cable 1/8" 7x19 1000' Stainless Steel ** Price on request

.283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
7001-16-W/B

Commercial Side & Top Weather-Strip 16' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-14-W/B

Commercial Side & Top Weather-Strip 14' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
CR2450

Maxcell/Renata 3V Lithium Button Cell

ME123-BLK-U

Miller Edge Black Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
  • .......more details
.406_5-1/4"-LH

Torsion Spring .406 x 5-1/4" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.306_3-3/4"-LH

Torsion Spring .306 x 3-3/4" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.250_3-3/4"-LH

Torsion Spring .250 x 3-3/4" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.273_1-3/4"-LH

Torsion Spring .273 x 1-3/4" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.218_1-3/4"-LH

Torsion Spring .218 x 1-3/4" x 12ft LH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 1-3/4"
  • Length: 12 ft
374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

  • Compatible with wireless keypad model number 377LMC
  • Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
  • This transmitter is replaced by 894LT
972LMC*

LiftMaster 2-btn Security+ Transmitter 390 MHz ***Discontinued

  • Both buttons feature Security+ rolling code technology
  • Compatible with models manufactured from 2005
  • Second button can learn other shared Liftmaster radio-controlled devices.
  • Includes visor clip and Lithium battery CR2032
372LMC*

LiftMaster 2-btn Security+ Transmitter 315 MHz ****Discontinued - Replaced by 892LT**

  • Both buttons feature Security+ rolling code technology
  • Compatible with models manufactured from 2005
  • Second button can learn other shared Liftmaster radio-controlled devices.
  • Includes visor clip and Lithium battery CR2032
  • Obsolete as of 9/31/2012 - Replaced by 375LM 892LT or 894LT
LSBLK

Loop Sealant Cartridge Black 29oz

  • Also available in grey (LSGRY)
  • Can be installed in sub-zero temperatures as long as the surface is clean and dry
  • Loop sealant gun sold separatley # LSGUN
71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

  • omplete disk brake assemble including 2-wire solenoid
71-B575

LiftMaster Interior Mount Brake Assembly 575V

23-2017

LiftMaster Limit Switch SPDT

30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

T-733

FL-Allstar 3-btn 3-Door O/C/S Transmitter 107477-311 MHz

  • This transmitter can control (open-close-stop) up to three doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 733T (190-107477)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8".
CP-SW-TD6A

Lynx Switch Light Delay

  • For the old Lynx 455 operators
.319_6"-RH

Torsion Spring .319 x 6" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
.375_5-1/4"-RH

Torsion Spring .375 x 5-1/4" x 12ft RH Yellow/Green

  • Wire size: .375
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.363_3-3/4"-RH

Torsion Spring .363 x 3-3/4" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.312_3-3/4"-RH

Torsion Spring .312 x 3-3/4" x 12ft RHW Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.225_2-5/8"-RH

Torsion Spring .225 x 2-5/8" x 12ft RH Orange/Green

  • Wire size: .225
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.283_2"-RH

Torsion Spring .283 x 2" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 2"
  • Length: 12 ft
.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

  • Wire size: .225
  • Inside diameter: 2"
  • Length: 12 ft
.207_2"-RH

Torsion Spring .207 x 2" x 12ft RH Brown

  • Wire size: .207
  • Inside diameter: 2"
  • Length: 12 ft
.234_1-3/4"-RH

Torsion Spring .234 x 1-3/4" x 12ft RH Blue/White

  • Wire size: .234
  • Inside diameter: 1-3/4"
  • Length: 12 ft
T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 3-buttons provides control for 3 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
  • .......more details
H14GHALF

Half Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 1-5/8" wide with slotted holes
H14G03

Hinge #3 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #3 position
  • Use between sections 3 and 4
  • Same as part number 243
  • .......more details
SESMT03

Erone Wall Support for Transmitter

  • Wall support for one S2TR2641 transmitter
  • Color: Grey
  • Velcro and mounting hardware included
VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

  • Used on MJ / MJH models
  • New belt type A replaces old 4L360. Part number VBELTA34
LIMIT018

Manaras Double Limit Switch without Lever

  • Double limit switch (DPDT) - Cherry
  • The extra contact is used to control auxiliary equipment
  • Applies to all current operators
DRUM006

Manaras Steel Brake Drum Flat Track - replaces DRUM001

  • Replaces DRUM001
  • Brake drum for all operators except Gear Head models prior to 1999.
  • Use with BRAKEPART018