Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SPRAY-525

Aluminum Touch Up Spray Paint 350g Black / Noir #525

350g

172845

Disconnect Chain Hoist Wall Mount 4:1 Torque Force

Wall mounting
4:1 reduction
Maximum pull allowed on hand chain is 35lb
Includes (1) 41B36 sprocket with 1” bore 4’ of #41 roller chain 26’ of hand chain (1) chain keeper (2) set screws 5/16"-18 and limit switch

Sell sheet

PBC-3

Push Button Control Station 3-Btn O/C/S Stainless Steel Face Plate Nema 1 Flush Mount

Single gang box
Face plate: 4-1/4" H x 2-3/4" W Back Box: 4" H x 2" W

RBH503L5-LH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

38123A

Genie Powerhead Mounting Flange

Mounting bracket connects the powerhead to the rail assembly.
A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
Fits TriloG PowerLift GPower and PowerMax Operators

IRB-325

EMX Industries Door and Gate Infrared Thru-Beam Photocells w/ Grey Hoods UL325-2016 EMX-1112-K

Type B1 non-contact sensor for use with automatic gates and doors
Power: 12V to 24V AC/DC
Relay Contacts: 30V 1A
Dimensions: 5.03" High x 3.06" Wide x 3.02" Deep
Housing: UL and CSA Type 4 4X 3 3R 12 13 Rating
Operating Temperature: -40 degrees to 170 degrees

.......more details

Installation manual Sell sheet

G-18

Molded Rubber Bumper Black 18" L x 10" W 4" Projection 4-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
4-1/2" depth
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.

.......more details

41B0873

LiftMaster Safety Sensor Sunblocker Kit Works With 41A5034 and 041-0136

This complete kit is used to shield sunlight and prevent accidental reversal of garage door from sunlight shinning directly into the safety sensors
Works with 41A5034
Same as: 041B0873 41B873

COLLAR002

Manaras Steel Collar 0.375" ID

ANGLE-13G

Perforated Angle 1-1/4" x 1-1/4" x 10 ft 13 g Orange

10 pieces of 10ft per bundle.

CF-101-12

Commercial Side & Top Weather-Strip 12' Long Aluminum / Vinyl

Same as Garaga CF101

CF-101-10

Commercial Side & Top Weather-Strip 10' Long Aluminum / Vinyl

Same as Garaga CF101

ANT-1A

Linear 7-inch Rubber Duck Mid-Range Antenna *** To Extent of Inventory

Antenna for Linear’s 27 MHz mid-range transmitters and receivers
Seven-inch ”rubber duck” style
Supplied with CON-180A straight antenna connector
Order CON-90A connector for right angle antenna mounting
Dimensions .65” W x 7” H x .65” D
Same as: SNE00031

.......more details

TRACK-2"-RAW-9

Raw Vertical Track 2" 9'-0" Sold per Piece

PRO-H-7511E-RH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

Installation manual Specification sheet

BCH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by CRBH751-LH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4
Brake installed on operator

Installation manual Manuel d'installation Sell sheet Brochure

111526.0001.S

Overhead Limit Shaft for RHX

For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.

BL-10

Barlock Kit Complete for 10ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (61-1/2")

Assembly Manual

21701

Doorlec Limit Switch Single ATM 15 AMP

POCKETWHEEL007

Manaras Pocketwheel Assembly with rollers and clips (Hoist-A-Matic)

Includes POCKETWHEEL005 CAM012 and CLIP020

C20-SR

Bearing Retainer football sytle (one piece) for 1-1/4" and 1" press fit bearings

Bearing flangette only.
Works with R5110 (1" bore) and R5114 (1.25" bore) press Fit bearings

CT501L5

LiftMaster 1/2HP 115/230 Volt 1Ph Com. Trolley Operator with Carwash Mod

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

PS241F

Adjustable Regulated Power Supply with Optional BBU 6-24VDC 1AMP

3 preset voltages: 6 12 and 24 VDC
Full adjustment from 2 to 24 VDC if required
Requires AC transformer for input power (minimum 14 VAC for 12 VDC output 26 VAC for 24 VDC output cannot be connected directly to 120 VAC)
Maximum 1 amp. Output at 70 deg. F and free air
Ripple: Minimum load: 0.007vrms Half load: 0.028vrms Maximum load: 0.057vrms
Regulation: 97.5%

.......more details

Wiring Diagram Diagramme de raccordement Spec Sheet Spécifications

MALED12

LiftMaster LED Barrier Arm 12 ft

The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
Ideal for use with the Mega Arm and Mega Arm Tower

D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

Maximum hi-lift: 164"
Capacity: 800 lbs per drum
Cable length: Floor to shaft center 181" minus amount of Hi-Lift
Cross reference: DNS 410-164 OMI 164HL M162-4165

26-40410

Truck Door T-Style Standard Side Seal 116"

Extruded from long lasting rubber
Seal protects cargo area from dirt and moisture
Used with standard J channel vertical angle with 1" track
Length: 116"
Cross reference: T #69840 W #4019 620200

CAPACITOR008R

Manaras Capacitor 440-648uf incl. Bleeder Resistor

Used for 3/4 HP 120/230VAC 1 ph motor255 374 & 258
Also for 1 HP 120/230V 1 ph motor350

1458W

Fasteners Self-Tapping Stainless Steel Hinge Screw with Washer 1/4" x 5/8"

400 Series Stainless Steel
Self Threading
Washer Head with Rubber Seal
Use with Stainless Steel Garage Door Hinges

CF-101-8

Commercial Side & Top Weather-Strip 8' Long Aluminum / Vinyl

Same as Garaga CF101

41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

Fits square trolley rail only
Same as 183A163

SEL2641R433-IP5

Erone 2-Relay Stand Alone Receiver Up to 500 Users 433MHz

2 transmitter keys per user
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
12/24V AC/DC

Wireless System Chart

2200-030

Linear Limit Nut

Used on various Linear Gate operators

MODKIT074

Manaras Hand Crank Field Modification Kit

For in-field upgrade on OGH and MGH operators

Installation Manual

37408

Doorlec Reversing Contactor BF9 120VAC

MK-00719

Micanan Replacement Antenna for On-Board & External Receiver

Approx. 8" long

CH501L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

MP-00001

Micanan Timer to Close 24V Modification

3-button o/c/s function timer will start counting from fully open reverse and reset from any device
24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)

94-61180-33-84

Truck Door 2" Steel Roller 6" Stem for Whiting Roll-Up Doors

open-bearing roller

423LMC

LiftMaster 3-Channel Co-Axial Receiver 390 MHz

8" coaxial antenna included
Used for open/stop/close on commercial motors
N/O and N/C selectable
Compatible remote: 33LM

Installation Manual Manuel d'Installation

1010-PER-FOOT

Replacement Sweep for One-Piece Door Grey Vinyl

Fits into the bottom of one-piece 'Stanley' doors.
Sold per foot
2" wide

PED42

Pedestal Post 42" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look
Same as G559

GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

Replaces Series II GIT-1 GIT-2 & GIT-3
Battery Instructions Visor Clip Included
Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.

Programming Instructions Instructions de programmation

02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

Code on key is #301

197LM

LiftMaster Wire Channel for T-Rail 5ft Replaces 27LM

Plastic channel attaches to the T-rail
Hides up to 3 pairs of wire
Each piece is 5ft long
Box quantity of 100

50-450

LiftMaster Interlock Switch for Sectional Door Nema 4 (Same as 50-13529)

Interlock switch is engaged by the door side lock and disables operator control.

CPS-RPEN4

LiftMaster Monitored Retro-Reflective Photo Eye with Nema 4 Enclosure for Commercial Door Applications

Installation Manual Manuel d'Installation Sell Sheet

25-10577

Truck Door Cam Lock Handle Only for Whiting Roll-Up Doors

Steel construction Black E-coat finish.
Cam lock allows one hand operation and easily accomodates padlock or car seal.
Can be used as a lift handle in open position
Back plate is offset to clear bottom seal retainer
Spring assisted handle eliminates door bounce
Handle Keeper Sold Separately. Use part #25-10578

.......more details

111010.0001

Overhead Door Serpentine VBelt 27" (6EPJ683)

Serpentine belt 27" long
Fits Genie GCL-T Trolley operator
Some Overhead drawbar models: JST RSX RMX

41A5021-I

LiftMaster Electronic Circuit Board Assembly ** Discontinued. No Stock Left

Assembly includes: Logic board end panel and light socket
For chain drive models with 2-lights
Fits 1265 Security + 390MHz
Also known as; 41A5021 41A5021-B 41A5021-C 41A5021-D 41A5021-E 41A5021-F 41A5021-G 41A5021-H

41C4398A

LiftMaster RPM Sensor Kit

RPM sensor assembly 1986 - present

Installation Manual_bilingual

.312_3-3/4"-RH

Torsion Spring .312 x 3-3/4" x 12ft RHW Yellow

Wire size: .312
Inside diameter: 3-3/4"
Length: 12 ft

MK00641

Micanan Smart 10.0 Full Feature Circuit Board Monitored with 5 Relays

For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
Board has P1 & P2 terminals
Up to 20 transmitters can be programmed

Instructions Manual

OPH-6533-ECB

Manaras Opera-H 3/4HP 600V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

TRANSF143

Manaras Transformer 120/240-24V 40VA

Transformer 120-240V Primary 24V Secondary 40VA

LIMIT024

Manaras Double Snap-Action Limit Switch with Flat Lever

Replacement for LIMIT003
2x SPDT - Unimax
Same as Doorlec # 21702

Limit Switch Chart

RADIO-50

Manaras MCT-32 3-btn O/C/S transmitter 32 doors 313 MHz ** Replaced by RADIO-EM932

Open/Close/Stop remote for 32 doors.
By selecting A B C or D on the rotary switch and 1 to 8 on the other you can operate any of the 32 doors.
Comes with LED battery life indicator and 9V battery.
Can be wall or post mounted.
Must be used with 32 MCR series receivers.

Programming Instructions

HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

Universal 11-pin harness

219110

Capacitor 1/2 HP 53-64 MFD 250V

For LDO50 only

1104-10FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 10' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

32-48-110

Extension Spring 8' Door - 110 lbs White ** Replaced by 27-48-110

Double - Loop
32" long 48" stretch 110 lb load
Springs sold individually

Spec Sheet

27-20300

Truck Door Cable Drum Roadside (LH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-2 T #59129-2 W #4014 330000

27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

Zinc die cast construction.
Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
Cross Reference: W #2518
2-3/16" I.D.

Z9003

Pusher Spring - 27" Sold as a Pair

Pusher spring 27" long with 15" travel. Sold as a pair

CB18B0500

Cable 1/8" 7x19 500' Galvanized

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs

Comparison charts

41A2817

LiftMaster Drive Gear and Worm Kit (No Sprocket)

Also known as: 081B0045 062216 081C0179 81B45 2612159

Installation Manual Manuel d'Installation

25-10001

Truck Door End Hinge for Todco Roll-Up Doors

Zinc plated steel construction
Four-knuckled to ensure smooth door operation
Cross Reference: T #69035 W #4007 220000

D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
Works with most LiftMaster gate operators
Won't work with Elite Series Mega Arm Slide & Swing
Simply plug it into the harness already in the operator
Loop lead-in wires connect to operator terminal strip
Gold plated control contacts

.......more details

Installation Manual Sell Sheet

IRB-4X

EMX Industries Nema 4 Through-Beam Photocells with Hoods *** No longer available

Outdoor and carwash through beam Commercial Photocells.
Up to 115' sensing distance
Electronic sunlight filter
Automatic compensation for temperature changes
12 to 24VAC/DC input voltage
one form C relay (NO and NC output)

.......more details

Installation Manual Sell Sheet

Q223

LiftMaster Control Board Master / Second (K001A5869) *** Discontinued

Replacement control board for the Miracle-One gate operator with two arms - Master / Slave.
Same as part no. K001A5869

SHAFT017

Manaras Spacer for Trolley Tracks

HSC-600

Hand Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Tool length is 25-1/2"
Wire rope cutting capacity 3/16”
Made in Japan

MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

Activates two 318MHz MegaCode receivers independently
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery incl.
Codes: 1000000+ (MegaCode format)
Dimensions: 2.16" W x 3.75" H x .95" D

.......more details

Programming Instructions

25-42-70

Extension Spring 7' Door - 70 lbs Orange

Double - Loop
25" long 42" stretch 70 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

HAE00018

Linear Inner Slide Assembly - Chain (HCT)

For LSO50 LDO33 & LDO50

26-945215

Truck Door Intermediate Panel (11.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

86-925

Gel Connectors Red 19-26 AWG 100/Pkg

Internal moisture-resistant sealant protects wires from corrosion (indoor/outdoor use)
Quick one-step splicing – insert unstripped conductors and crimp
Use with solid copper single-conductor wire 19-26 AWG
Maximum insulated O.D. of .066 in. (1.68 mm)
Permanent connection- once crimped they cannot be reused
Use 12 or 3 ports as needed

.......more details

111-0060

RW Box Track #33 Black 8ft Up to 700lbs

Finish: Black enamel

MASDCBB3

LiftMaster MEGA SPRINT High-Speed DC Barrier Gate Op ARM SOLD SEPARATELY Incl 29-NP712

24VDC (1/2 HP equivalent) motor
The heavy-duty motor supports 10000 cycles per day with an operator speed of .9 seconds to open or close.
Radio receiver built-in
Aluminum alloy chassis
Built-in battery backup
Soft start/stop

.......more details

Z9959

Tension Release Hub Torsion Spring Back Winder

Safely back wind the torsion springs in tricky “slipped cable” situations
Easily slide and tighten the solid steel hub on either end of the torsion shaft to back wind the torsion springs using a 5/8" winding bar unwrap and re-install the cables on drum
Can be used on 1" solid or hollow shafts

10-LHB

BEA LZR Housing Bracket

��Housing bracket for the LZR-H100 sensor

MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

GALV-273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
Chain Spreader for Maxum for 1" door shaft

837LM

LiftMaster MyQ Smart LED Garage Light Sec+ 2.0

1000 Lumens of LED illumination provide a bright maintenance-free glow.
Unique compact design allows for placement where you need it.
Easy to Install. Conveniently plugs into a standard outlet and mounts on the wall or ceiling.
Control and schedule your LED light from anywhere with the myQ app. Requires a LiftMaster® or Chamberlain® garage door opener with myQ technology Smart Garage® Control or myQ Internet Gateway.
Acts as a garage door opener light (works with Alert-to-Close and Motion Control) when paired to your garage door opener.
Turn lights on and off with the myQ App or your garage remote.

.......more details

837LM Manual (EN/FR)

DCWALLCTL

LiftMaster Floor Level Wall Controller with LCD Display

Compatible with LiftMaster MAXUM Commercial Door Operators.
4-line LCD display gives you access to more information at all times
Bringing programming troubleshooting and Diagnostics down to the floor level will save you time and money
Menu based user interface allows you to scroll through edit and save options and settings easily.
Dimensions: 3.586” W x 8.166” H x 1.732” D

WD-8300

Wayne Dalton Classic Steel Garage Door ** By Quote Only

Heavy-gauge steel and a thick layer of insulation provides a smooth dependable operation that excels in appearance and strength.
R-VALUE: 12.12 / 16.12
WD's best-insulated residential garage doors feature two layers of steel surrounding a thick layer of foamed-in-place polyurethane insulation.

41832R.S

Genie Service Head 6070H/B 6170H/B

FOR REPLACEMENT OF JACKSHAFT OPERATOR SHAFT RELEASE OR MOTOR ASSEMBLIES
Head Service Kit for 6070H/6070HB and 6170H/6170HB
Special Order Price by Quote Only
This kit includes the complete motor but does not include the circuit boards transformer or cover for the 6070/6170 unit.

OTBH-6113-AM06

Manaras Apt-Style Trolley Op 3/4HP 120V 1Ph Monitored w/N1 Eyes Silencio

The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
Dimensions: Back Room: door height + 4'5" (1350 mm)
Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel

MYQ-SGC2WLM

LiftMaster Smart Garage Camera ***To Extent of Inventory

The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
Video camera begins recording when motion is detected.
Easy setup with Bluetooth and magnetic mounting base.
Enables secure in-garage delivery for Amazon Prime packages

.......more details

LM21AFCB

LiftMaster Advance Fire Control Release Device

UL 864 Revision 9 compliant.
3 count obstruction cycling.
Selectable 10 20 30 or 60-second time delay on alarm.
Test key switch – Floor level testing.
Motor voltage sensing.
Form C relay output.

.......more details

OPH-6112-M-N1-RH

Manaras Opera-H 1/2HP 120V 1Ph Monitored ECB and Nema1 Eyes Right Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

OSH-6113-M-N1-RH

Manaras Opera-SH 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

P-9931R-4F

Pulsar MVP 1-Channel 4-Wire Gate Receiver 318 MHz P-111645

One channel
4-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming instructions

GHW-353-1.5-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1.5 HP 575V 3P with Nema4 modification