Devanco Canada - Get The Right Garage Door Opener‎ and Parts

VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
Probe assembly and wire are water tight and direct burial compatible
Harness is pre-wired onto lead wire for easy installation
Settings are placed in a non-volatile memory in case of power failure

.......more details

26CW14522-CUT

Truck Door Intermediate Panel (12" x Cut-To-Size) Painted White for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

.192-2-R

Cut-to-Length Torsion Spring .192 x 2" Right Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

BTN-8L5-GR

Devanco green replacement button for 8L5-OCS

green replacement button for 8L5-OCS

SELECTOR-8L5

Devanco replacement rotating 8 position switch selector for 8L5-OCS

replacement rotating encoded 8 position selector for 8L5-OCS

30001

Doorlec Brake Solenoid 575V with wire leads

50200

Doorlec Front Idler for ETB-3 with 410B9 -5/8" Sprocket

ST101-BTM-WHITE

Lynx Bottom Panel White 10x24

Includes bottom PVC

SS-STRUT-16

Strut Stainless Steel 2-1/2" x 16ft 16-Ga

MIL-HYD-KIT

Milwaukee M18 Fuel 1/4" Hex Hydraulic Impact Driver Kit 2760-22CT

Kit includes: Tool carrying case (2) M18 REDLITHIUM 2.0 Compact Battery Packs and charger
FLUID-DRIVE™ Hydraulic Powertrain:
Reduces metal-on-metal contact inside the tool
Minimizes wear for increased durability compared to standard impact drivers
Delivers smoother performance longer service life and quieter operation
Completely sealed mechanism filled with hydraulic fluid

.......more details

K72-12789

LiftMaster Hand Chain Shaft Kit GH (1/2 - 2HP)

Complete with: Bevel Gear 3/4" ID Hand Chain Guice Hand Chain Shaft Bearing 3/4" ID Nyliner Bearing Compression Spring Chain Wheel Washers Roll Pins and E-Rings

510.3920.05

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 5 Panels

Upgrade option

3BXL

Control Station Exterior Surface Mount O/C/S N4 with Key Lockout

Metal Enclosure
Buttons aligned in a triangular pattern
H=4-3/8" W=4-1/8" D=2-5/8"

3BXL

MD-00515

Micanan Roller Chain #50 Waterproof 10' Pack

Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

Hand crank for SL3000

PRO-GH-10081U-L

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

CGH751L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Damp Environment Modification

K20-3200C-4TP

LiftMaster Electric Motor 1-1/2 HP 230/460V 3PH CF TEFC

Also known as: K20-3200C-4TP 20-3150C-4T K20-3200C4T 20-3200C-4T

88573

Marantec Relay Power Board for M4500 Models

Same as # 83364

MODKIT012B

Manaras Non-Reset Cycle Counter Kit - Boards

Field install kit
When activated counts one complete cycle of the door
Hardwired

.262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

ALUM-5P5

Aluminum 24" x 100' Spool Graphite # 5P5

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P5
Reverse side is #431 Bright White

Colour chart

MOTOR272

Manaras Electric Motor 1/2HP 600V 3PH

Continuous-duty base mount ODP 60Hz •This item is compatible with BRAKE011

LDCO850

Linear 800 Newton Smart DC Powered Garage Door Opener spott Wi-Fi Accept Both Belt or Chain Rail

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Remote compatibility chart

08-9098

LiftMaster Angle Mount Bracket Mounting Clip

PRO-HB-7523U-LH

Micanan 3/4HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-H-5053-E-RH

Micanan 1/2HP 575V 3P Hoist Operator NM ECB No Eyes Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

MDT-1A

Linear 1-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming instructions

DM-100

Skylink Swing Door Opener with Electro-Magnetic Lock ***NLA

Can be installed on most doors including wood and metal doors.
Hit and Stop feature ensures safety operation.
Fail safe operation - Door can be open/close freely during power outage
Optional audio warning as an indication when the swing door opener is operating
Can learn up to 16 remote controls

.437-334-R

Cut-to-Length Torsion Spring .437 x 3-3/4" Right Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

PRO-J-7553-U-LH

Micanan 3/4HP 575V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

LMWETXU

LiftMaster Wireless Edge Transmitter Monitored

Connects to wireless edge receiver using low-energy Bluetooth transmission
Sensing distance up to 130 ft
Transmitter accepts up to 2 wired resistive edges
Battery life 2 years
NEMA 4X rated
Compatible with LMWEKITU Wireless Edge Kit and L50 and S50 Monitored Resistive Edges

.......more details

Installation manual Manuel d'installation Product Guide Guide de produit

ME117-C7

Miller Edge PVC Mounting Channel Sold by the Foot

PRO-GT-15053-U

Micanan 1-1/2HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

CP-HU-TC3-34-575/3

Lynx TC3 Medium-Heavy Duty Trolley Op. 3/4 HP 575V 3P Contactor Style

.273-258-L

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

K001A6426-2

LiftMaster Control Board RSL12V/RSW12V

PRO-T-7581-U

Micanan 3/4HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

CAPCELL

LiftMaster Cellular 4G/LTE Modem with Wifi

Connect CAPXL and CAP2D Anywhere: compatible with SIM cards from most carriers.
Sign up with your preferred carrier or add on to your current plan.
Avoid trenching and wire pulling for speedy installations.
Eliminate plain old telephone service (POTS) and improve reliability.
Compatibility: At&t® Verizon® T-mobile® Bell® Rogers™ Telus®
Capacity: Connect up to 4 wired or multiple Wi-Fi devices

.......more details

CAP2D

LiftMaster Connected Access Portal 2-Door Controller

Cloud-based credentialed access control.
Capacities include: 2 controlled gates / doors
25000 local resident capacity
6000 local event history (FIFO) offline from host
Multiple Holiday and Hold-Open Scheduling including one-time and repeating exceptions
Power: 2V DC Min. 1.5 Amps (transformer not included)

.......more details

MF00009

Micanan Hex Head Bolt 1/4" - 20 UNC x 2-1/4" Partial Thread

Used on PRO-HHD
1 required per operator

MV-00354

Micanan Control Station 3-Btn O/C/S N4 Surface Mount c/w Key Lock-out & Red Pilot Light 24V

LVB924-11

Laminated Bumper Black 9" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

MK-00546

Micanan Heater Probe in Reducer Mod. (24V 20W 3/8" NPT)

HINGE-811-PCG

Powdercoated Hinge #8 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #8 - 0.87 lbs
Powdercoated Grey
For use with 7/16" stem rollers

HINGE-111-PCG

Powdercoated Hinge #1 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #1 - 0.61 lbs
Powdercoated Grey
For use with 7/16" stem rollers

K79-32927

LiftMaster Control Board Autogate *** Not Available

Replacement control board used in various Autogate Operators.
Autogate is a gate operator manufacturer that utilizes LiftMaster control boards in their operators
Formally AG001

SL585103U

LiftMaster Industrial Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl. ***NLA

POWER: 115/208/230 VAC. Single Phase
ACCESSORY POWER: 24VAC 500mA max.
MONITORED SAFETY INPUTS: 3 Main Board 3 Expansion Board.
TEMPERATURE SPECIFICATIONS: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater -40°F (-40°C) to 140°F (60°C).
Heater option: HTRNB or NTR460 for 460V operators
UL USAGE CLASSIFICATION I II III and IV.

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Brochure Wiring diagram Schéma câblage

38123A

Genie Powerhead Mounting Flange

Mounting bracket connects the powerhead to the rail assembly.
A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
Fits TriloG PowerLift GPower and PowerMax Operators

MK-00013

Micanan Relay 120VAC coil DPDT (Flange Mount)

COLLAR004

Manaras Collar 5/8"

VWS-34-CREAM

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Cream

Pan head
S point
Also known as Almond

.207-3-8.25-RHW

Mini Storage Spring .207 x 3" x 8.25" long Right Hand

SL-310T-2

Skylink 2-Btn Visor Mount Transmitter 310 MHz ** No Longer Available

Easy to carry or clip on sun visor.
Works in conjunction with Skylink Universal Receiver: Model SL-310R.
Operating range of 100 feet and more.
12V alkaline battery included.

PL-B09-CRG-METAL

Lynx Inner Trolley (Metal)

Proline / Lynx 455 Plus trolley slide assembly
For operators built from 2000 +

CB5160500-KOR

Cable 5/16" 7x19 500' Galvanized

Galvanized Cable 5/16" 7x19 500ft spool.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

HW0775

Low Headroom Quick Close Device 2" track Sold as a Pair

Includes 1 RH & 1 LH bracket
Heavy Duty for doors up to 16' x 16'
Single End

Diagram

T118

Manaras Trolley Track 18ft for 3/4HP & ALL APT models up-charge *Actual length 246"*

For models MGT/OTH/OTBH 3/4 hp only with Chain #41

MK-00519

Micanan Surface Mount Fused Disconnect Modification

Mounted to control panel cover in lieu of primary fuse block inside panel

K74-MODELH

LiftMaster Main Wire Harness L3

MB-15202

Micanan Electric Baldor Motor Only 2 HP 575V 3PH C-Flange TEFC 145TC (Severe Duty)

MV-00300

Micanan Banner Intrinsically Safe Reflective Photocell ONLY (0-25ft. Range) *** Special Order POR

Model Q45AD9LV same as part # 37620
Range: 9 m; Input: 5-15V dc
Output: NAMUR
2 m (6.5 ft) cable
Nema rating: NEMA 6P
DOES NOT include the bracket or the reflector. Use MV00482 for the kit

.......more details

WEL-200-R

EMX Wireless Edge Link Receiver Unit only

Manual

41A5658-1

LiftMaster Dual Gear & Sprocket Assembly

This complete kit is compatible with 3/4HP LiftMaster® Models 8587/8587W; and various dual AC chain drive garage door openers.
Kit includes: helical gear and top hat assembly worm gear wear bushings grease and hardware needed to replace the chain drive gears.

MP-00040

Micanan High Cycle Modification Jackshaft Models PRO-J / H only

For installations with high frequency usage
Double V-belt cast iron flanged precision bearings on all shafts and delay on reverse circuit
Supplied with #50 chain

MG020-Y-2E-03

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 3 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

7001-18-BRONZE

Commercial Side & Top Weather-Strip 18' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

TL-5000

Trailer Lock Lever 32-1/4" long Stainless Steel

Provides leverage to easily open shipping container doors
18-8 Stainless steel construction
Polyurethane coated handle
5.5 lbs.
32-1/4" long
Fits most modern container door handles

.......more details

5-36-3

2" Vertical Track 14-GA 8'-3" (9' door) Sold per Pair

CF-101-18

Commercial Side & Top Weather-Strip 18' Long Aluminum / Vinyl

Same as Garaga CF101

MX00034

Micanan Brake Assembly for PRO-HHD Solenoid NOT included (MX00206)

Solenoid sold separately

BK024/PR

Commercial 2" LHR Bottom Brackets Sold as a Pair (L & R)

Sold as a pair (includes one left and one right hand)
Same as BB-5 LHR Reinforced

MV-00278

Micanan Cutler Hammer Reflective Photocell Kit 24V 0-25ft Range w/Brackets (MK00371/MV00371) *** No Longer Available. Use 60-2728 instead

Includes eye reflector and bracket
Same as MK00371 Eaton 1450E-6514

029-98205

W-Style Replacement Door White Stainless Steel Package 029-98205

Replacement door size between 98" wide x 105" high
Painted white
Stainless steel package

PRO-HBH-7583U-L

Micanan 3/4HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

SBX-N1-P-5011JH

Micanan Control Box PRO-H

Dimensions: 11" x 8" x 5" h

STRUT-3-18'

Door Strut 3" Hemmed 18ft Long

Reinforcement bar 3"

25-10109

Truck Door 1" Steel Roller 5" Shaft Length for Todco Roll-Up Doors ** NLA

Zinc plated Hardened shaft and raceways
Seven roller ball design

37502

Doorlec DC-2000 Electronic Circuit Board for Constant Pressure Close

Works in all Doorlec model openers except R-99
Input power to board is 120V
24V DC available on terminals 9 & 11
Accessory power on terminals 1 & 11
Programmed to work with constant pressure to close

4059GY-216

Garex Thermo Moulding 3/4" Beading Gray 18ft

White and Black also available

MG00004

Micanan Belleville Washer 13/16 ID x 1-3/16 x 1/8 (8 required per operator)

PRO-H/HB operator parts
6 required per operator

DM54LC-COATED

Cable Drum High Lift 54" 400-54HL Specialty Coated Pair

Use for Commercial Highlift Doors
Maximum Door Height 120" + Highlift
Maximum Highlift 54"
Lifting Weight Per Drum 275 lbs.
Resists Chemical/Moisture Corrosion
Abrasion Resistant

.......more details

MV-00014

Micanan Key Switch O/C Tamper Proof Nema 4 Surface Mount

.262-334-R

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Red/Yellow

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

SNRKPMKR

LiftMaster MiniKey Keypad White DISCONTINUED

Also known as: SNRKPVP SNRKPOLP SN1610016-B

PRO-4X_MOD

Micanan Nema 4X Modification 1/2HP- 2HP 3-Phase

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
1/2HP to 2HP Motors

COAX-RG6-ASBLY

Coax Cable Assembly Sold per Foot

Assembly includes union

CABLE_1/4SS-250

Cable 1/4" 7x19 250' Stainless Steel

BG790-50-53

LiftMaster Industrial-Duty Wishbone Barrier Gate Operator 1/2 HP 575V 3 Ph Arm & Weight Incl

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
Standard Features: Control inputs and Adjustable limit settings
Heater sold separately
Includes 24 ft. wishbone arm with black and white stripes and two counter weights

.......more details

Installation manual Sell Sheet

.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

Shaft Mounted Junior Hoist
4:1 Reduced Drive
Sprocket: 41B36. Bore size: 1-1/4" diameter
Cross Reference: OMI 4020
Requires minimum 3/8" center line offset.
Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.

.......more details

Sell sheet

5001-14-BLACK

Residential Side & Top Weather-Strip 14' Long - Black

PVC wrapped
Painted aluminum retainer
Dual fin vinyl

732

Fasteners Flat Washer 3/8" SAE 1" OD Zinc 1000/Box

7/16" ID x 1" OD x 5/64" thickness (ID: 0.4375’’ OD: 1’’ THK: 0.084’’)

BCH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by CRBH751L5-RH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4
Brake installed on operator

Installation manual Manuel d'installation Sell sheet Brochure

PROROLL4

Cantilever Roller 4" Round Post with Covers Sold as a Pair *** Discontinued

3100 pound rating
Integrated polyurethane cover for safety ensuring UL325 compliance
Sealed bearings for maintenance-free operations
DuPont™ Delrin® injection molded for smooth quiet movement
High-precision roller for water resistance and industry's best overall temperature rating