Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
3BLM-BC

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose and Best Cylinder

  • Open-Close-Stop
  • Dimensions: 7" h x 2-3/4" w x 3-1/2" d
  • Exterior surface mount
3BLM-BC
BP-BE102BP

Contact Block Base Mount NC Contact

  • For use with RC P enclosures. IP65
COVER048

Manaras Plated Solenoid Cover for OSH

  • Cover only
TC134-9

Top Cap 1-3/4" 9 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
41A5021-1M-315

LiftMaster Receiver Logic Board with Purple Learn Button *** Discontinued

  • For LiftMaster models: 1345 1346 1355 and 1356
  • For Chamberlain models: CG40D & CG42D
  • Replaces Reciever Logic Boards: 41A5021-1H-315 41A5021-4M-315 41A6135-1A 41A6148-1 and 41A6148-1A
CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
29-17A3CO

LiftMaster Safety-Pack for N7 Operators

  • Intrinsically safe control circuit
  • K160-0192 is a Safety Relay Service Kit for various LM commercial ops
UNI-100-162

Uni-Size Bottom Weather Seal 16'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
UNI-100-142

Uni-Size Bottom Weather Seal 14'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
MD-00003

Sprocket 41B36 x 1" Bore 1/4" Keyway

  • 2 set screw 5/16
18-MAG-STRAP

Magnetic Hinge Strap 18" Black Set of 4

  • Decorative hinge strap only.
  • Black flexible magnetic material with deep embossed design
1104-ASFT-8FT

Elton Aluminum Stiffener for 1104 8ft

  • Prevents the 1104 from buckling in the hot sun
K-T5011L4

LiftMaster Electrical Box Replacement Kit L4 K-T74-33015-1 ** Price by Quote Only

  • For models APT T SD 115V 1Ph L4
25-2010

LiftMaster 10 Amp Overload Fuse

  • For models: SL585-50-11 SL595-50-11 SL575-50-11
AIRSWITCH009

Exterior Mosley Air Switch SPDT Plastic Housing ***NLA

T012

Manaras Trolley Track 12ft for 1/2HP models *Actual length 174"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
MD-00030

Roller Chain #40 10' per Pack

  • Includes (1x) master link
22-460

Brake Solenoid 440-460V

  • Used on all brands of commercial door and gate operators
  • same as MK-00028
OVERLOAD002

Manaras Telemecanique Overload 3-ph 1.2 - 1.8A

  • Telemecanique # LR2K0307
17-10336

LiftMaster Pulley 7.000"OD 3/4" Bore 4L-Belt

26-40045

Truck Door Offset Bottom Seal 98" Long for Whiting Dryfreight Doors

  • Co-extruded using rigid PVC backing with flexible PVC seal.
  • To be used with the offset U-channel retainer only (26-40037 or 26-40039)
RELAY024

Manaras Relay DPDT 24VAC

  • Used in all heavy-duty operators as well as MLT and Opera-MH/MJ
HSCFV112

Hinge Full Vision Hinge Clopay Style "B" 12-ga Stainless Steel

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Use on Clopay Brand Full Vision Products
MA116

LiftMaster 17 ft Aluminum Arm Round Yellow/Black Stripes ***NLA Repl. by MA116RDOT

  • Used on Mega Arm gate operators
  • Requires counterweight model MA117 - sold separately.
  • Size: 17 feet long x 3" round
  • Arm opening area: 14ft (end of cabinet to arm tip)
  • Replaced by MA116RDOT
50346

Doorlec Electric Switch and housing for Mechanical Edge

412001

Linear 2-Channel Multi-Code Visor Transmitter 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Installation Manual
97-75003

DOT-C2 Reflective Tape 150 ft x 2" W 6" Red x 6" White Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
GH4416-08-R

Green Hinge #8 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
K-LA400

LiftMaster Primary Replacement Arm Service Kit for LA400 Original Silver Arm

  • Replacement arm only - no stripes old style
737

Fasteners Round Head Carriage Bolt 3/8-16 x 3/4" 1000/Box

  • Gr. 5 Zinc
FGS-634

Devanco Food Grade Silicone 262g

  • For use in food and industrial plants
  • Stops squeaks
  • Prevents sticking and corrosion
  • Protects rubber mouldings and weather stripping
Safety Data SheetFiche de données de sécurité
100MAPS

LiftMaster External Power Supply 110VAC Input 12VDC 2000mA

  • Provides enough power to operate two LC-36A light curtains.
  • Includes 38' cable leads
LC-36A

LiftMaster Light Curtain **discontinued

  • Must be used with a primary entrapment device and be installed along the vertical plane of the door.
  • Color-coded transmitter and receiver for easy identification.
  • Provides 36 in. of effective height coverage to increase the area of protection.
  • Multiple sets of LC-36A curtains can be mounted on a door providing coverage flexibility.
  • Maximum door width of 33 ft. ensures coverage for most commercial doors.
  • Eight (8) LEDs per side and 22 cross-beams produce an invisible curtain of infrared light for maximum detection capability.
    • .......more details
Installation ManualManuel d'InstallationSell SheetConnecting the lc-36A to a Non-LiftMaster Opener
41A5507-B

LiftMaster Receiver Logic Board for 2500 (390 Mhz) ** Discontinued

  • With end-panel
  • Also known as 41A5507 41A5507B
27-48-130

Extension Spring 8' Door - 130 lbs Yellow

  • Single - Loop
  • 27" long 48" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G06-SS

Hinge #6 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H12G04-SS

Hinge #4 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
DWGK11

Bircher Air-Wave Switch DW40 with N4 Enclosure

  • Bircher pressure wave switch with connection terminals
  • 6.3mm plug tab in impact-resistant plastic housing
  • For pressure wave switch series D1 grey housing bottom.
  • A pressure wave generated by pressing the sensing edge reaches the pressure wave switch.
  • The membrane deflects and the electric contact switches.
  • The electric contact remains switched as long as the input pressure is above the response pressure.
    • .......more details
Manual
K20-1100C-2TLP

LiftMaster Electric Motor 1 HP 115/230V 1Ph TEFC Logic

MP00019

Micanan Up-Charge Track and #410 (#48) chain for 20' h Door *Actual length 270"*

  • For 1/3 HP and 1/2 HP operators only
MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

  • For 1/3 HP and 1/2 HP operators only
BRAKE013

Manaras Band Brake Assembly Kit OSH

Installation Manual
MP00014

Micanan Up-Charge Track and #41 chain for 14' h Door *Actual length 198"*

  • For 3/4 HP and 1 HP operators only
MP00016

Micanan Up-Charge Track and #41 chain for 16' h Door *Actual length 222"*

  • For 3/4 HP and 1 HP operators only
MP-00024

Micanan Auxiliary Chain Disconnect for Pro-T TB

  • Allows for operation of a door by an auxiliary chain hoist.
  • Hoist mechanism is coupled to front end of drawbar
  • MUST specify door width and position of hoist (left or right)
9003-9FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 9' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
5X20SC50

Devanco Loop 5' x 20' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
PD180CBT30MU

Carlo Gavazzi Photoelectric Through-Beam Emitter 30M

  • Emitter only. If receiver is required order PD180CBT30Q
  • For Industrial doors and Gates
  • Range: 30M
  • Relay output
  • Supply voltage emitter: 2 x 3.6VDC lithium batteries
  • Dimensions: 180m x 51 x 49m
    • .......more details
Installation Manual
1224-1-3/4"-WHT

Elton Commercial Window for Flush Doors 1-3/4" thick 1224 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
K72-12493

LiftMaster Limit Switch Kit

  • Complete kit with limit nut retainer switch plates backup plate depress plate limit switches (3) standoffs screws and locknuts
  • For logic control MT BMT MJ MH MHS
71-10345

LiftMaster RPM Sensor Board (MT only)

K-LA500

LiftMaster Primary Replacement Arm Service Kit for LA500 Original Arm ** DISCONTINUED

  • Replacement arm only - no stripes old style
PRO-LH-5011U-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • On board 372 MHz receiver with antenna
  • On-Board receiver holds up to 20 transmitters
    • .......more details
Installation manualSpecification sheet
MBAT

LiftMaster Battery 7AH 12VDC

  • Single battery good for 40 cycles
  • Dual batteries recommended on gates over 16ft or 600 lbs.
E041

Rolling Steel Bottom Bar Astragal 679 Sold per Foot

14FW

Rolling Steel 3" Filler Endlock for Continuous

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
17JW

Rolling Steel 2" Flat Cast Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
2G-RIGHT

Rolling Steel 2" Curved Stamped Endlock Right Hand

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are at both ends of every slat.
  • Rivets included with endlocks
AC9

Felco C9 Cable Cutter 1/4" Capacity

  • Tool length: 13"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 9mm / 0.35in
    • .......more details
Data sheet
7096

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Curbside (RH)

  • A Whiting original
  • Cable drum and bearing
7549

Whiting Winding Cone for 2-5/8" ID Spring Wire Curbside (RH)

  • A Whiting original
7550

Whiting Winding Cone for 2-5/8" ID Spring Wire Roadside (LH)

  • A Whiting original
SLT14-22P

Rolling Steel 3" Flat Slat 22-ga Primed

SLT4-20

Rolling Steel 3" Crowned Slat 20-ga Galvanized

SLT4-18P

Rolling Steel 3" Crowned Slat 18-ga Primed

SLT17-22

Rolling Steel 2" Flat Slat 22-ga Galvanized

SLT2-22P

Rolling Steel 2" Crowned Slat 22-ga Primed

SLT2-20

Rolling Steel 2" Crowned Slat 20-ga Galvanized

21-35077

LiftMaster Transformer 575V 24V 40VA

  • 575V PRIMARY 24V SECONDARY 40VA
  • Same as K21-35077
GH101-L5

LiftMaster Gearhead with Brake 1 HP 115/230V 1P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
GH755-L5

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5 ***NLA

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
PL-B11-ARM-STR

Lynx Straight Arm for Proline Operator

  • Used on Proline residential garage door openers
50445

Doorlec Mushroom Push-Button Red with 2 Contacts

  • Capable of opening two doors or gates simultaneously
  • NEMA 4 Enclosure
G7M

Skylink 2-Button Universal Keychain Remote

  • Controls up to two different garage door motors wirelessly.
  • It can be used as a keychain remote or with the included wall mount bracket or included visor clip for your car.
  • It operates most national brand garage door openers and is very simple to set up by selecting the brand using an indicator dial on the back.
  • Skylink G7M is compatible with the following garage door opener models:
  • Chamberlain and LiftMaster since 1983
  • Sears Craftsman since 1983
    • .......more details
Programming Instructions
MOD034

Manaras Monitored Photocell Upgrade N1 to N4

  • Ideal for industrial environments submersible and impact resistant.
  • Flexible design withstands and realigns after mechanical impact.
  • Max. range 45ft.
  • Incl. photoeyes 3ft of conductor wire and mounting hardware.
  • Applies to all operator models with electronic control "M" types.
.343-6-LH-C

Torsion Spring .343 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 6" Length: 12 ft
.343-3-3/4-RH-C

Torsion Spring .343 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 3-3/4" Length: 12 ft
.283-3-3/4-LH-C

Torsion Spring .283 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 3-3/4" Length: 12 ft
.283-3-3/4-RH-C

Torsion Spring .283 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 3-3/4" Length: 12 ft
.262-1-3/4-LH-C

Torsion Spring .262 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 1-3/4" Length: 12 ft
D525-216-1

Cable Drum Standard Lift 18' 3-SS Torque Force Pair

  • 18' standard Lift aluminum die cast alloy with 3 set screws.
  • Pair includes: (1) LH and (1) RH.
  • Color coded: Red=LH and Black=RH
  • Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
  • Max. Cable Diameter: 3/16". Mounting: 1" solid shaft with 1/4" keyway
  • Cross Reference: DM518 DNS 5-18 OMI 2200
    • .......more details
CF-101-8

Commercial Side & Top Weather-Strip 8' Long Aluminum / Vinyl

  • Same as Garaga CF101
RN0034-SS

Roller 3" White Nylon 4-3/4" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 100000 cycles for a 12' door
  • Overall length is 5-1/2” and the shaft (stem) is 4-3/4” which includes the shoulder.
RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
CH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Brake not included.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
BK314

Jamb bracket J-14 #14 12 gauge

  • Sold by the piece
  • Height 5.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK313

Jamb bracket J-13 #13 12 gauge

  • Sold by the piece
  • Height 5.25" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

  • Fits square trolley rail only
  • Same as 183A163
K72-12563

LiftMaster Clutch Shaft Kit for Model H Prior to 2005

SOLID_SHAFT_24'

Solid Shaft 1" Keyed 24 ft Galvanized

  • Maximum length for a solid shaft is 24ft
  • Actual length is approx. 24'-1"
SOLID_SHAFT_14'

Solid Shaft 1" Keyed 14 ft Galvanized

  • Actual length is approx. 14'-1"
1110197

LiftMaster Take Up Bolt 3/8"-16

  • Measures 3-15/16" Long
  • Also known as: G115015 1110197 115015 11-10197
K22-36900

LiftMaster Triple Phase Brake Solenoid L5

50680

Doorlec Clutch Assembly for LJH

MOD074

Manaras Hand Crank Modification

  • For manual operation with a hand crank instead of a chain hoist.
  • Hand crank hook and eye outlet is supplied.
  • A 5/8" rod or pipe (SHAFT002) is required but not supplied
  • SHAFT002 should be ordered separately and desired cut-to length specified at time of order.
  • This modification is also available for in the field upgrade - see MODKIT074
  • This modification applies to OGH and MGH operators
    • .......more details
MODKIT074

Manaras Hand Crank Field Modification Kit

  • For in-field upgrade on OGH and MGH operators
Installation Manual
OGH-6436-ECB

Manaras 2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6435-ECB

Manaras 1-1/2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6214-ECB

Manaras 1 HP 240V 1Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6533-ECB

Manaras 3/4 HP 600V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet