Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
8010-3FT

Bottom Sweep for Entrance Door White ** No Longer Available

  • Height adjustable
  • Vinyl: White
  • Length: 3 ft
14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

  • I-Beam Chain Drive Rail for model 3595
10FT-RAIL-CHAIN

LiftMaster 10' chain drive rail 1710LMC - colour code: Red

  • #48 chain size
  • Price reflects cost if purchased with an opener
7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

  • I-Beam Chain Drive Rail for model 3595
8FT-I-BEAM

LiftMaster 8' I-Beam Rail 3708CH / CD1008

  • I-Beam Chain Drive Rail for model 3595
8FT-RAIL-CHAIN

LiftMaster 8' chain drive rail 1708LMC - colour code: Blue

  • #48 chain size
  • Price reflects cost if purchased with an opener
02-103

Push Button Station 3-btn Surface Mount Metal Housing

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
50-106

Take-Up Reel 2-Wire Metal 18-ga 20ft

  • 18-gauge
  • 20 ft extended
  • Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
  • Also called Reel cord
K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

  • UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
  • Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
  • 315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch
Installation Manual
485LMC

LiftMaster Battery for Integrated BBU Units

  • For use in Liftmaster 8550 8500W 3850 and 8360 models
  • 12V 4.5 AMP
  • Same as Part # 41A6357-1 41A5948
  • Battery back-up good for 20 cycles
Installation ManualManuel d'Installation
10FT-RAIL-BELT

LiftMaster 10' belt drive rail 2770BD - colour code: Blue

  • Price reflects cost if purchased with an opener
TUBE_SHAFT_17-STL

Hollow Shaft 1" x 17'-0" Steel 13 gauge

  • When ordering order one foot longer than actual door width.
.331_6"-LH

Torsion Spring .331 x 6" x 12ft LH Red/White

  • Wire size: .331
  • Inside diameter: 6"
  • Length: 12 ft
.207_1-3/4"-LH

Torsion Spring .207 x 1-3/4" x 12ft LH Brown

  • Wire size: .207
  • Inside diameter: 1-3/4"
  • Length: 12 ft
365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad
  • Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT
Programming InstructionsInstructions de programmation
894LT

LiftMaster 4-btn Sec+ 2.0 Learning Transmitter

  • Liftmaster 894LT is designed for Sec+2.0 and Sec+ applications
  • Replacement for Models 374LM and 974LM.
  • Compatible with the following Sec+2.0 Sec+ Dip-Switch when cloning other Dip-Switches Remote Controls such as: 811LM 813LM - Sec+2.0 331LM 361LM 362LM 363LM 333LM - 315Mhz Sec+ 61LM 63LM - 390MHz Burst Technology.
  • Sends out multiple frequencies on the same code at the same time (Sec+2.0 only) 2 and 4 button options
  • Typically used in gated communities along with a garage door opener.
  • This single remote control will allow you to copy the code used for the gate instead of carrying 2 remote controls in the vehicle.
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
AA

Battery AA Alkaline Duracell Procell Sold Individually

  • Sold Individually
891LM

LiftMaster 1-btn Transmitter Sec+ 2.0

  • Controls a single garage door opener or gate operator or MyQ® enabled light accessory
  • Equipped with Security+2.0™ rolling code technology that virtually eliminates radio wave interference
  • 3V lithium battery included
  • Compatible only with Security+2.0™ LiftMaster® garage door openers or gate operators
  • Equivalent to Chamberlain's 950ESTD
Programming InstructionsInstructions de programmation
893LM

LiftMaster 3-btn Transmitter Sec+ 2.0

  • Controls up to three garage door openers or gate operators or MyQ® enabled light accessories
  • Equipped with Security+2.0™ rolling code technology that virtually eliminates radio wave interference
  • 3V lithium battery included
  • Compatible only with Security+2.0™ LiftMaster® garage door openers or gate operators
  • Equivalent to Chamberlain's 953ESTD
Programming InstructionsInstructions de programmation
LSGUN

Loop Sealant Gun for Quart Sized (32oz) Tubes

  • Caulking gun for LSBLK / LSGRY
71-B575H

LiftMaster Interior Brake Kit with Cable 575V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
  • Includes solenoid
Instruction Manual
71-B240H

LiftMaster Interior Brake Kit with Cable 230-460V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
Instruction Manual
29-31245

LiftMaster Relay 12VDC 250VAC 4-Pin SPDT C & D relay 3-phase only

  • C & D relay 3-phase only
41A5668

LiftMaster Gear & Sprocket Assembly for ATS211X

  • For models: ATS211X ATS2113X
  • For older model ATS211 use part number 41C4470
Installation ManualManuel d'Installation
41AC050-1M

LiftMaster Electronic Circuit Board Assembly

  • Assembly includes: circuit board end panel and light socket
  • For chain drive units with one light
  • Fits 3245 & 3255
  • Also known as 41AC050-1 041AC050-1M
41DB002-2

LiftMaster Circuit Board Assembly *** To Extent of Inventory

  • Assembly includes: Circuit board end panel and light socket
  • For belt drive units with two lights such as 3850C
  • Same as 41A5685
03-8024-K

Reversing Contactor 3-Pole

  • Reversing contactor with 24 VOLT coil
  • Dimensions: 3.5" long x 2.25" wide x 2.25" high
  • Telemecanique part # LC 2K09 107B7
4A1344

LiftMaster Light Socket Plastic (41C279)

19-40HL

Half Link #40

  • Half link for #40 chain
  • ANSI Standard Carbon Steel
41A5483C

LiftMaster Circuit Board Assembly *** To extent of Inventory

  • Assembly includes: Circuit board end panel and light socket
  • For chain drive units with two lights
  • Fits 2265 2565 7420 PD610 PV612C & PD612K
  • Last letter of the part # indicates revision date
  • Also known as 41A5483 41A5483B
K001A6837

LiftMaster Replacement Logic 4 Circuit Board L4

  • iftMaster replacement logic board (L4) kit for Commercial operators L4 board is UL325 compliant & requires CSPU photoeyes for momentary contact operation
  • Works with LiftMaster operators of all voltages and HP
  • Maintenance Alert System (MAS)
  • Open Mid Stop feature
  • Timer-to-close mode
  • Car dealer mode
    • .......more details
16-5L304

LiftMaster Cogged Vbelt 5L 30.4"

R-831-P

FL-Allstar 1-Door O/C/S Receiver 107480-311 MHz***NLA

  • This receiver comes in a metal enclosure.
  • It has three isolated contacts to open close or stop the door. If your operator can be controlled by three button station then our R-831-P receiver and commercial remote controls will work with your operator.
  • Manufacturer's model number: 190-107480
  • Dimensions: 9 1/4" x 6 7/8" x 1 1/4".
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
FL-KEYPAD

FL-Allstar Wireless Keypad 110927-311 MHz

  • This wireless keypad controls up to four doors.
  • Manufacturer's model number: (190-110927)
  • Dimensions: 6" x 2 3/8" x 1 1/4".
Programming Instructions
T-931-M

FL-Allstar 1-btn Mini Transmitter 109391-311 MHz

  • This single channel miniature transmitter controls one door.
  • It has a nine switches encoder with three positions: + 0 and -.
  • Manufacturer's model number: 9931MT (190-109301)
  • Dimensions: 1 3/8'' x 2 3/4'' x 1/2''
CP-SW-TD6A

Lynx Switch Light Delay

  • For the old Lynx 455 operators
CAM005

Manaras Limit Cam 5/8-18 UNF

  • Limit cam for Mountshaft009
  • 2 cam's required per shaft
41DJ001

LiftMaster Circuit Board with Plate for 3800 3900 41DJ001B

  • Board: Security+ 315 MHz
  • For jackshaft models; 3800 3800P 3800PLD & 3900
  • Also known as 41DB001-2
Programming InstructionsInstructions de programmation
41A4885-2

LiftMaster MVIS Pulley & Worm Gear Assembly

  • Gear and sprocket assembly for belt drive models between 1995-2002
Installation ManualManuel d'Installation
144C56

LiftMaster Idler - Cable Pulley for chain drive

  • For square rail assemblies
  • Same as 144C0056
19-40ML

Master Link #40

  • For #40 chain
  • ANSI Standard Carbon Steel
890MAX

LiftMaster 3-btn Mini Transmitter Security+ 2.0

  • Can be used as a replacement remote control for 80 Series 970 Series and 370 Series LiftMaster remote controls.
  • Compatible with 315 MHz or 390 MHz garage door openers manufactured after January 1 1993.
  • For use with gate operators commercial door operators or other products that are 315 MHz or 390 MHz and have a Learn Button.
  • Includes 3V battery (CR2032)
  • Same as 953CB
890MAX Manual
.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.243_3-3/4"-RH

Torsion Spring .243 x 3-3/4" x 12ft RH White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.319_2-5/8"-RH

Torsion Spring .319 x 2-5/8" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 2-5/8"
  • Length: 12 ft
13-10024

LiftMaster Limit Nut

  • Limit nut / cam for commercial door and gate operators
19-50ML

Master Link #50

  • For #50 chain
  • ANSI Standard Carbon Steel
15-41B32LGH

Sprocket 32 Teeth 1" Bore 1/4" Keyway

  • Sprocket for #41 chain
50307

Doorlec Cam Shaft Sub-Assembly EHJ ETH ETBH LJH

  • For models; EHJ ETBH and ETH
  • Assembly includes: Cam shaft (26140) Oilite (11801) x 2 Sprocket 41B12-5/8" (31118) Flange Bearing (28002) x 2 and nuts.
MJ00001

Micanan Brake Shoe - Left **No Longer Available**

  • Only available in complete kit # MJ00013 or MJ00014 for PRO-GH
MJ00002

Micanan Brake Shoe - Right **No Longer Available**

  • Only available in complete kit # MJ00013 or MJ00014 for PRO-GH
MJ00003

Micanan Brake Drum ** To extent of inventory

  • Fits all Micanan commercial operators equipped with a solenoid brake
  • Available only in complete kit # MJ00013
PL-SW-PHOTO

Lynx Silent Guard Photocell for Proline Openers

  • For models built from 2000+
  • Comes with photoeyes wire and bracket
CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

  • Single limit with curved actuator lever
  • Switch attaches directly to the Logic 6000 board
CP-SW-HOIST

Lynx Interlock Switch

H14G05

Hinge #5 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #5 position
  • Use between sections 5 and 6
  • Same as part number 245
    • .......more details
SEA433

Erone Tuned Antenna 433MHz

  • Increase reception and/or range
  • 11.5ft (3.5m) coaxial cable (RG 58) included
  • L-Shaped bracket for wall-mounting
Wireless System Chart
SESMT03

Erone Wall Support for Transmitter

  • Wall support for one S2TR2641 transmitter
  • Color: Grey
  • Velcro and mounting hardware included
Wireless System Chart
CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

  • Reversing contactor with 24V coil
  • Same as part # LC2K12107B7
  • Demensions: 3.5" long x 2.25" wide x 2.25" high
  • Use 03-8024K as possible replacement
MOUNTSHAFT014

Manaras Clutch Shaft Kit for Opera-H (OPH)

  • Input / clutch shaft kit for Manaras Opera-H
Drawing
VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

  • Used on MTH MTBH MSL models
  • Type B
  • Inside length 32 inches
VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

  • Used on MJ / MJH models
  • New belt type A replaces old 4L360. Part number VBELTA34
VBELT_4L340

Manaras VBelt 4L 34" - repl. by A32

  • Used on MTH/MTBH APE APT models
  • Same as Doorlec 19030
BRAKEPART018

Manaras Brake Shoe Assembly Kit

  • Kit includes SHOE001 & SHOE002 for old brake system.
  • Fits all Manaras operators except gear head made prior to 1999.
Drawing
BRAKEPART019

Manaras Brake Band Assembly (Standard Brake)

  • Replaces BRAKEPART017 SHOE008
  • To use on brake drums with edges (DRUM004)
  • New part number is BRAKEPART019KIT
Installation Manual
BRAKE011

Manaras Band Brake Assembly Kit

  • Does not include solenoid
  • Replacement brake kit for operators that are belt driven and have a brake. Works with OSH OTBH
  • Will not work with Gear-Head operators
Installation Manual
877MAX

LiftMaster Sec+ 2.0 Keyless Entry with Universal compatibility (MAX) ***No Longer Available

  • Security+2.0™ rolling code technology assures a new code is sent every time the keypad is used
  • Temporary password option enables visitors or delivery and service personnel to enter the garage without giving them your personal code Completely wireless – powered by one 9-volt battery (included)
  • Weatherproof flip-up protective cover Backlit keypad makes numbers easy to see even in the dark
  • One-button-to-close feature makes it easier than ever to close your garage door (works with all LiftMaster® garage door openers manufactured since 2006)
  • Programs in 2 easy steps
  • Compatible with LiftMaster® Security+2.0™ garage door openers
    • .......more details
877MAX Manual
RADIO-50

Manaras MCT-32 3-btn O/C/S transmitter 32 doors 313 MHz ** Replaced by RADIO-EM932

  • Open/Close/Stop remote for 32 doors.
  • By selecting A B C or D on the rotary switch and 1 to 8 on the other you can operate any of the 32 doors.
  • Comes with LED battery life indicator and 9V battery.
  • Can be wall or post mounted.
  • Must be used with 32 MCR series receivers.
Programming Instructions
RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

  • Open/Close/Stop remote for 4 doors.
  • By selecting A B C or D on the rotary switch you can operate any of the four doors.
  • Comes with LED battery life indicator.
  • 9V battery included.
  • Can be wall or post mounted.
  • Must be used with 4 MCR series receivers.
    • .......more details
Programming Instructions
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
Programming Instructions
5377.115

Whiting Side Seals 1/2" Track Spacing 115" Long

  • Most common side seal for Whiting Dry Freight doors.
  • 115 inches will fit almost every size door.
308913

Linear 1-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
MVP-WKE

Allstar Wireless Keypad 110927 318 MHz *** NLA

  • Compatible with all MVP receivers and operators
  • 4-digit access code
  • Backlit keys
  • Operate LED
  • Power: 9-volt battery
  • Codes: 19683
    • .......more details
Programming Instructions
DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by 8 dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
HAE00014

Linear Pulley and Bracket - Chain (HCT)

217436

Linear Drive Sprocket - Chain (HCT)

218954-03

Linear Pulley & Bracket Assembly - Belt (HBT)

HAE00048

Linear Helical Gear with Grease

  • Includes roll pins
  • Can be used on all Linear / Westinghouse residential operators.
  • Helical gear measures 2-7/8" diameter
HAE00047

Linear Complete Gear Set with Grease

  • Set includes: Helical gear worm gears and grease
  • Helical gear measures 2-7/8" diameter
219110

Capacitor 1/2 HP 53-64 MFD 250V

  • For LDO50 only
5600.3

Whiting Truck Door Stainless Steel Bottom Roller Bracket Assy Complete

15.1

Whiting Truck Door Stainless Steel Center Hinge

7176.225_31.910

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 91"

RV-200

2" Vinyl Insert for Brush Retainer per foot

  • Color: Black
200BL

2" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1703
4009-12FT

Aluminum Retainer only for Light Brush 12' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

  • For angle application (45 degree)
  • For use with Heavy Brush
4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
4006-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1003-5"-YELLOW

Bottom U-Rubber 5" Yellow 150' Long

  • 5" yellow vinyl insert 150ft spool.
1003-5"-150FT

Bottom U-Rubber 5" Black 150' Long

  • 150ft spool of vinyl insert.
1009-1-3/4"

Bottom Nail-On for Wood Door Heavy Duty per foot

  • For 1-3/4" commercial doors.
  • Color: Black
1019-1-3/8-16'

Rigid Vinyl Bottom Retainer Flat 16' Long

  • Black - for door thickness of 1-3/8"
1015-1-3/4-10'

Rigid Vinyl Bottom Retainer Raised Centre 10' Long

  • Black - for door thickness of 1-3/4"
1007-1-5/8-16'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 16'2"

  • For door thickness of 1-5/8" to 1-3/4"
1006-1-3/4-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-3/8-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"