Devanco Canada - Get The Right Garage Door Opener‎ and Parts

STRUT-3-20'

Door Strut 3" Hemmed 20ft Long

Reinforcement bar 3"

21702

Doorlec Close Auxiliary Switch Double Limit DAT

MG020-B-2E-06

Miller Edge Sensing Edge Black 2-Wire End Outlet 6ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

MG020-B-2E-04

Miller Edge Sensing Edge Black 2-Wire End Outlet 4ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

200BL-10

2" Light Brush Insert 10ft Long

Polypropylene bristles
Same as MS1703-120

SP20W12V

LiftMaster Solar Panel Kit 12V 20 Watt

Includes mounting bracket and hardware with 10' cable

Installation guide Guide d'installation

R5220

Sheave Strap 3"

Sheave strap also known as fork only
Same as part number 302

BCH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand ***Replaced by CRBH753L5-LH

Industrial Duty Hoist Operator with Damp Environment modification
Comes with CPS-UN4 photoeyes
External brake included

Installation manual Manuel d'installation Sell sheet Brochure

MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

SPST
2 mounting holes
Dimensions: 2.375 x 0.875 x 0.75 inches
Color: Light Gray
Intended for indoor use

26-943255-CUT

Truck Door Bottom Panel with Seal (15.5" x cut-to-size) for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

26-943255

Truck Door Bottom Panel with Seal (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

ALUM-506

Aluminum 24" x 100' Spool Windswept Smoke/ Vent Fumee # 506

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 506
Reverse side is #431 Bright White

Colour chart

K002B0821-1

LiftMaster Transformer for EL1SS and EL25

120 volt input power plugs into a standard outlet
16VDC output 2.5 amps

CR2025

3V Lithium Button Cell

5001-16-BLACK

Residential Side & Top Weather-Strip 16' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

LM21XPBBVB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup and Voice Board ** No Longer Available

UL864 Revision 9 compliant
Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
Trouble and alarm relays for communication with the fire alarm control panel if required
Audible trouble sounder to indicate when the release device is not operational
On board diagnostic LEDs for easy troubleshooting

.......more details

Installation manual

Q085

LiftMaster Dolly Cover HCT K09-50756

Same as K09-50756

Q084

LiftMaster Cam Lock and Keys HCT K80-50142

Same as K80-50142
Fits model HCT
Comes with 2 keys

SF514U-114

Spring Fitting 5-1/4" Pair for 1-1/4" shaft

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding 1-1/4"bore & (1) stationary 1" bore.

SF514U

Spring Fitting 5-1/4" Pair for 1" shaft

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.

201-300-301-00

Equinoxe Long Range Transmitter O/C/S for 1-Door 433 MHz. Pre-2016

Open/Close/Stop remote for 1 door
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Old generation - prior to 2016

Programming Instructions Instructions de programmation

KPX-100

EMX Access Control Keypad

Stainless steel face with metal backlit keys
Anodized and powder coated steel outer housing that is vandal and weather resistant to IP66 (all weather)
Dual relay outputs
Over 100 Million 4-8 digit codes
12-24V AC/DC operation
100 user codes on Relay 1; 10 users relay 2

.......more details

RSH-6114-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 120V With Elect. Board N4X Thru Beam Eyes Right Hand

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

Installation manual Sell sheet

AK-11-KEY

Linear Key (1) only for AK-11 (2200-884)

Replacement Key ONLY qty: 1 only

ALUM-801

Aluminum 24" x 100' Spool White / Blanc # 801

20% thicker than the aluminum sold in retail stores (0.022" )
Aluminum on the reverse side
Gentek # 801

Colour chart

C16-32FHD

Bearing 1" x 2" Press Fit Heavy-Duty

Flanged ball solid steel bearing
Rating: 1 000 000 revolutions
Axial load: 150lb max
Radial load: 900lb max

15-50B24QGH

Sprocket 24 Teeth 1-1/4" Bore 1/4" Keyway

ME123-M-YEL-U

Miller Edge Yellow Universal 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

ME123-M-BLK-RH

Miller Edge Black RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

MD-00031

Roller Chain #40 Nickel Plated Sold by the Foot

20-1050B-2RLP

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

Replacement motor for APT
Also known as 20-1050B-2RL 20-1050B-2R K20-1050B2R
For L3 and L4

745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC

MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

7119405

FAAC 400 Plug for End Cap

MUSHROOM-PB

Lockable Mushroom Push Button with 1 NC Contact

N/C Contact "Stop"
Push to Stop Turn to Unlock
NEMA 4 Enclosure

41DJ001A-390

LiftMaster Receiver Logic Board with Plate 390MHz *** No Longer Available

50DCTWF

LiftMaster Receiver Logic Board DC. WiFi *** To extent of Inventory

Board: Tri-band Security+ 2.0l
Fits: 8550W
001D8363
Same as 50DCBL5 001D8363 041D8169 1D8169‑2 001D8214 1D8169‑1 1D8169 1D8363

50ACTWF

LiftMaster Receiver Logic Board AC WiFi*** Discontinued and replaced by the 050ACTBMC

This is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi with MyQ® technology.
For use with various LiftMaster® and Chamberlain® AC Chain or Belt Drive Garage Door Openers; manufactured after 2011.
The unit will feature a yellow learn button
Also known as: 1D8088-1 045ACTWF 1D8808-3 041D8088 50ACCL5
Same as 050ACTWF
1 Year Warranty

.......more details

CP-BRG-1

Lynx Bearing 1" *** Replaced by HW-BRG-1

2 in total on a MCJH

SF375-114

Spring Fitting 3-3/4" Pair (Long Ear) 1-1/4" Bore

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1-1/4" solid shaft
3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.

.......more details

R5205

Saddle Support for 4" Pulley

8 gauge galvanized steel

CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

Flexible magnetic material with an embossed finish
100 piece contains ten each of numbers 0-9
Priced per box

MALED17

LiftMaster LED Barrier Arm 17 ft

The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
Ideal for use with the Mega Arm and Mega Arm Tower
Counterweight required part # MALEDCW

79-16088

LiftMaster Circuit Board Assembly for LGO **discontinued**

Same as K79-16088

R5202

Pulley 3" Zinc Plated Steel with Sheave Strap

Bored for 3/8" diameter bolt
Maximum cable diameter: 3/16"
Hardened inner race.

MG00021

Micanan Flat Washer 7/8" ID x 1-1/8" OD

MOD064C

Manaras Trolley Hoist Kit #410 Chain for OTH

Modification when purchased with an operator
#410 CHAIN WITH FRONTIDLER ASSY
CHAIN HOIST ASSY
HOIST KIT FOR TROLLEY HOIST CHAIN

Drawing

.363-6-L

Cut-to-Length Torsion Spring .362 x 6" Left Hand Wound Green/White

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

EQ2722

SkyLink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

The DC motor offers additional benefits with very quiet operation and much less vibration.
It is ideal for garage doors that are below a living room or bedroom.
The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
Available in either Belt or Chain drive
Includes two 2-btn keychain remotes # MK318-2

.......more details

Installation Manual Sell Sheet

97799

Marantec Shark Tooth Position Reference Tab Belt Rail (96834)

Same as part number 96834
For belt rail

Replacement Instructions

2'6X6SC50

Devanco Loop 2'6" x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

111420.001.S

Overhead Cut-Off Switch for RSX Operator

Interlock switch for Overhead model RSX

Replacement Instructions

CB3160500-KOR

Cable 3/16" 7x19 500' Galvanized Supreme

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs
A higher quality cable compared to the Chinese cable
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

T112

Manaras Trolley Track 12ft for 3/4HP & All APT models *Actual length 174"*

For models MGT/OTH/OTBH 3/4 hp only with Chain #41

25-2010

LiftMaster 10 Amp Overload Fuse

For models: SL585-50-11 SL595-50-11 SL575-50-11

25-2006

LiftMaster 6 Amp Overload Fuse

For models: SL585-50-21 SL858-50-81 SL595-50-21 SL595-50-81 SL575-50-21 SL575-50-81

HDC-411-LH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Left Hand

1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
Solid state circuit board Lynx-6000. Built in 1.5 second delay.
5L V-belt primary reduction #50 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Precision pillow block bearings on output shaft.
Fully driven adjustable limit switches.

.......more details

Sell Sheet

OVERLOAD002

Manaras Telemecanique Overload 3-ph 1.2 - 1.8A

Telemecanique # LR2K0307

17-10336

LiftMaster Pulley 7.000"OD 3/4" Bore 4L-Belt

26-40029

Truck Door U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors ** To Extent of Inventory

Aluminum extrusion construction
For use with Bottom Seal #26-40027

RELAY024

Manaras Relay DPDT 24VAC

Used in all heavy-duty operators as well as MLT and Opera-MH/MJ

MA116

LiftMaster 17 ft Aluminum Arm Round Yellow/Black Stripes ***NLA Repl. by MA116RDOT

Used on Mega Arm gate operators
Requires counterweight model MA117 - sold separately.
Size: 17 feet long x 3" round
Arm opening area: 14ft (end of cabinet to arm tip)
Replaced by MA116RDOT

CABLE-NR-18-SS

Cable No Roll 1/8" 19x7 Stainless Steel T302-04 500ft

19X7 SS T302 1/8” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
Minimum break strength of 1700lbs

MT-UHF-0-0

AWID Long Range Metal Mount Tag

For use with LR-2000 and LR-3000 readers
Operating temperatures from -58°F to 185°F (-50°C to +85°C)
Reading Distance up to 25 feet
Battery not needed passive tag
Passive RFID technology with excellent-price-to-performance ratio
Proprietary encryption for protection of card data

.......more details

GH4416-04-R

Green Hinge #4 12-ga Right Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-02-R

Green Hinge #2 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

MA013

LiftMaster Shear Pin #6 (Standard)

For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear

DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

500 users (proximity badges and/or codes)
3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
Audible & Visual feedback
1 request-to-exit input
Tamper switch
1 form C door relay output (3A/125V)

.......more details

Programming Instructions Instructions de programmation Sell Sheet Wireless System Chart

10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

Transmitter offering means of activation of automatic doors with extended hold feature.
Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
Operating temperature: -10 to 55C
Controls one 10RD433 receiver.

3007-0

Elton Telescopic Door Handle / Foot Plate Black

For door thickness: 1-3/8" - 2"
Black polyethlene
Cut-out size: 6-3/8" x 3-5/8"

12-19504

LiftMaster Flanged Bearing 1" Keyed

OSH-6112-ECB-LH

Manaras Opera-SH 1/2HP 120V 1Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

EP2989

Exhaust Port 5" with latch long barrel ** Discontinued **

5" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.

USVD-4X

EMX Ultra Sonic Vehicle Detector

The USVD-4X Drive Thru Vehicle Sensor uses patent pending Triangular Planar Array (TPA) technology to detect the presence of a vehicle.
The USVD handles any drive thru operation such as fast food banking pharmacies car washes and parking garages.
The USVD is simply mounted on a post or order box and aimed at the location where a vehicle would pass to initiate a transaction. No set-up or adjustments required.
Aux. relay settings for pulse on ENTRY EXIT or BOTH
Output delay option for 1 2 and 4 seconds
Operating range: 1ft. – 5ft.

.......more details

Installation Manual Sell Sheet

K72-33872-1

LiftMaster Limit Switch Shaft Kit

For models MT BMT MJ MH and MHS logic control
Kit includes: limit shaft limit nuts limit bearings limit sprocket washers compression ring roll pin and e-ring

21-10340

Transformer 115-24V AC 20VA

120V Primary 24V Secondary 20VA

PRO-LH-5011U-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board 372 MHz receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

14JW

Rolling Steel 3" Flat Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

2G-RIGHT

Rolling Steel 2" Curved Stamped Endlock Right Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlocks

SLT14-22P

Rolling Steel 3" Flat Slat 22-ga Primed

21-35077

LiftMaster Transformer 575V 24V 40VA

575V PRIMARY 24V SECONDARY 40VA
Same as K21-35077

342.115

Whiting Intermediate Panel Tongue & Groove 11-1/2" x 96" Price on Request

Standard size panel primer only

342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

Standard size panel primer only

6X10PO50-RIGID

Devanco Loop 6' x 10' Rigid PVC pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

GH755-L5

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

GH503-L5

LiftMaster Gearhead with Brake 1/2HP 208/230/460V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

.283-3-3/4-RH-C

Torsion Spring .283 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 3-3/4" Length: 12 ft

.273-1-3/4-LH-C

Torsion Spring .273 x 1-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .273 ID: 1-3/4" Length: 12 ft

BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

Universal spring anchor brackets - Residential/Commercial
Centerline adjustment: 3-5/16" to 6-3/4"
Bright zinc plated 8 gauge steel
No bearing
Bearing R5110 sold separately

RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 50000 cycles

RBH755L5-LH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

Q311

LiftMaster Surge Protection for Master / Second *** No Longer Available

For the Miracle-One two arm gate operator - master/ slave
Same as part no. K74-50329

Q223

LiftMaster Control Board Master / Second (K001A5869) *** Discontinued

Replacement control board for the Miracle-One gate operator with two arms - Master / Slave.
Same as part no. K001A5869

BK313

Jamb bracket J-13 #13 12 gauge

Sold by the piece
Height 5.25" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK309

Jamb bracket J-09 #9 12 gauge

Sold by the piece
Height 4.25" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

109B33

LiftMaster Trolley Belt Clip

SOLID_SHAFT_18'

Solid Shaft 1" Keyed 18 ft Galvanized

Actual length is approx. 18'-1"


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login