Devanco Canada - Get The Right Garage Door Opener‎ and Parts

378LMC

LiftMaster Wireless Control Panel

Wireless control panel for 315 MHz openers
For use as a secondary wall control panel only
Mounting hardware and batteries included (CR2032)
Auxiliary button to open/close 2nd garage door
Tested and it will work with MH5011

Programming Instructions Instructions de programmation

823LM

LiftMaster Remote Light Switch Sec+ 2.0 ** To Extent of Inventory

Controls lights remotely
Turn on lights in your garage yard or home with your garage door opener remote control
Use with LiftMaster Internet Gateway to control lights from smartphone or computer
Compatible only with Security+2.0 garage door openers and accessories enabled by MyQ technology

Installation Manual Manuel d'Installation

41A4252-7G

LiftMaster Circuit Board Assembly **Discontinued

Assembly includes: Circuit board end panel and light socket
Features Billion Code 390MHz technology
For chain drive units with one light
Fits 1240 1245 1246 1255 1256 215WD & 315WD

41A6095

LiftMaster Electric Motor and Bracket for 3800 / 8500

For models: 3800 3800P & 3800PLD
Also known as 002D1622

41A6102

LiftMaster Power Door Lock Connector with 2 pins

For Jackshaft models

CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

Brake shoes for all Lynx operators
Assembly includes the shoes
release spring and bolt included

111645

Allstar MVP 1-Channel 4-Wire Gate Receiver 318 MHz ***Replaced by P-9931R-4F

One channel
4-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P

Installation Manual

8833TC

Allstar 3-btn 9-Door Transmitter 109023 318 MHz ***Replaced by P-8833TC

Open/Close remote for 9 doors
Compatible Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door trio to operate
Power: 9-volt battery

.......more details

Programming Instructions

HAE00018

Linear Inner Slide Assembly - Chain (HCT)

For LSO50 LDO33 & LDO50

HAE00004

Linear Limit Switch Assembly

For LSO LDO LCO

4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

18-RWB-PAIR

Winding Bars Round 18" Set of 2

Cold rolled hardened steel.
Machined to 7/16" at one end with 1/2" outside dia. on the other.
Sold as a pair.

1106-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black dual fin vinyl

25-42-100

Extension Spring 7' Door - 100 lbs Tan

Double - Loop
25" long 42" stretch 100 lb load
Sold individually
Same as part number 111
Rated for 10000 cycles

Spec Sheet

H11G01

Hinge #1 x 11 gauge

11 gauge hinge #1 - 0.61 lbs
Bright zinc-plated
For use with 7/16" stem rollers
Item code # 224185

BK021/PR

Commercial 3" Safety Bottom Bracket ** Indef Delivery

Maximum cable diameter: 1/4"
Maximum door weight: 1650 lbs Zinc
Plated Steel
Sold as a pair

23-10041

LiftMaster Limit Switch Commercial

Will work on LiftMaster and Micanan operators

WSL-1

Devanco WeatherStrip Lubricant 275g aerosol

Lubricates and protects Weather strip on garage doors doors and windows
Helps prevents sticking during extreme hot and extreme cold conditions
Same as LS-300
12 cans per case

Safety data sheet Fiche de données de sécurité

CGH751L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

54-440

Limit Switch Snap Action Standard Short Hinge Roller Lever S54

SPDT

41AC050-1M

LiftMaster Electronic Circuit Board Assembly

Assembly includes: circuit board end panel and light socket
For chain drive units with one light
Fits 3245 & 3255
Also known as 41AC050-1 041AC050-1M

SNACPH39

LiftMaster HID 30-bit Proximity Card Facility Code 9 *Discontinued*

Same as SN000099-30-9
Compatible with KPR2000 reader
Replaced by LMPC2-SN (need to know facility code)

HSC-600-B

Bench Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Wire rope cutting capacity 3/16”
Made in Japan

OGH-6115-ECB

Manaras 1-1/2 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

41A2817

LiftMaster Drive Gear and Worm Kit (No Sprocket)

Also known as: 081B0045 062216 081C0179 81B45 2612159

Installation Manual Manuel d'Installation

19863R

Genie Clip and Collar Rail Connectors

For Genie screw drive units having split rails use a collar and spring clip to join the 3-piece screw.
Complete collar and clip set for one 3-piece rail.
Compatible with all screw drive Genie garage door openers
Set of 2 clips and 2 collars
Same as 19806A04 and 19807A04

DC500-100

Dyna-Hoist DC Series Direct Drive Opener 1/2 HP 110/240V 1ph ** Price by Quote Only

The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 0.5 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
Comes with integral absolute encoder to control the door travel
24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
Nema 4 photocell

.......more details

Pulse Series Installation Manuals DC Series Brochure

CR-2000

EMX Keypad/Card Reader Waterproof 5401-1

Back-lit keys for nighttime operation
2000 users (card or passcode)
Rugged waterproof design and vandal resistant
9-24 VDC
Tamper alarm
Door call button

.......more details

Instruction Manual Spec Sheet

15-48B18LGE

LiftMaster Sprocket 48B18 1"x 1/4"

Also known as: 15-9004 1548B18LGE 159004

CBG24DCGMC-GREY

LiftMaster Techna Commercial DC Barrier Gate Operator Grey Cabinet

24VDC barrier gate operator with battery backup
Continuous-duty motor with soft start/stop
Exceptional starting torque and continuous operation
Heavy-duty motor supports 6000 cycles per day
Operator speed of 2.5 seconds to open or close
Aluminum alloy chassis

.......more details

Installation Manual Sell Sheet Data Sheet Wiring Diagram Quick Start Quide

27118-600V

Doorlec Electric Motor TEFC 2HP 600V 3PH DC224C

Frame size is 56C 1725 RPM for worm-gear reducer driven models

SBR-N1-0L-H120

Micanan Brake Assembly for PRO-HBH LH 120V Solenoid included

Solenoid Included

TDC48-12

LiftMaster Trolley Chain Pack #48 700LBS 12ft Door

Chain pack only
TDC48-12 is a #48 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 12' commercial doors.

1-0242

RW Stay Roller 68 Nylon 2-1/2" Dia

Special Order item
Reverible and adjustable for doors 1-1/2" to 3" thick
Steel frame Zinc plated finish

461-0003-10

Richard-Wilcox #31 Square Track 10ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75x14g

MGH-6534-M-N1-LH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

LA400XL20W

LiftMaster Single Arm Solar Package for LA400 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA400DC)

Kit Includes: LA400DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA400DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016

LZR-H100

BEA LZR Gold-Black BLK-02 H100

Laser scanner for gate and barrier applications.
Provides four laser-based curtains offering a three dimensional detection zone.
Detection curtains are highly configurable and can be set up for activation and presence detection in vehicle sensing applications.
Effective alternative to induction loops.
Max detection range: 32'x32'
Cable length: 33'

.......more details

LZR-H100 User Guide (EN)LZR-H100 Cut Sheet (EN)LZR-H100 User Guide (FR)LZR-H100 Cut Sheet (FR)

10SSTI

BEA Active Infrared Presence Sensor

Active infrared sensor for industrial environments.
Applications: automatic industrial doors gates and automation.
Uses triangulation to detect presence of an object eliminating false detections caused by varying ground conditions.
Can be mounted on stationary or moving objects.
Can be used individually or daisy-chained with up to 8 other modules.
Can be used on narrow and wide doors.

.......more details

GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

21" panel = 4 grooves 24" panel= 5 grooves
COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
Minimize the heat transfer between the inside and outside of your garage.
LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
WOOD END BLOCKS Suitable to receive steel end caps
HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor

.......more details

RGH-6214-MON-RH

Manaras 1 HP 240V 1Ph Rapido Gear Head Op. Monitored ECB Right Hand

Rapido version of model OGH
Includes PHOTO-061 Monitored N4X Thru-Beam eyes

OSH-6434-M-N1-RH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

CGH205L5-LH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 575V 3P L5 Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

GALV-283-2-144-R

Torsion Spring .283 x 2" x 12ft RH Galvanized White

Wire size: .283
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

BEA-10EARA

BEA Rain Hood for Eagle Artek Black

��Rain hood only

BEA-10EAGLE-ARTEK

BEA Eagle Compact Motion Sensor 6'-13' Mounting Height

EAGLE ARTEK is a motion sensor for all types of automatic doors. Its slim and compact design ensures discreet integration for your application making it ideal for pedestrian doors.
Superior field performance with improved filters that help to reduce false detections.
Easy to install and set up with flexible parameters and simple push-button settings. •The detection field can be adjusted without manually adjusting the antenna.
Max. detection range: wide: 13’ × 6.5’ narrow : 6.5’ × 7’ (@ 7’ high)
Temperature range: -4 – 131 °F (-20 – 55 °C)
Cable length: 8’

.......more details

Installation manual Spec sheet

25130

Doorlec Seal Oil CR6372

SD103L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 208/230/460 3PH Left Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

SETR2641AM1AN-C

Erone 2-Channel Mini Transmitter Grey 433MHz Proprietary Encoding

Heavy-duty construction
Elegant & easy to carry
Light grey and blue base with grey buttons
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

10TD900INDHH4

BEA 4-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

7-6088

RW Hanger 321 For use with #31 Track

MQ00011

Micanan 3/32" Aluminum Oval Sleeve Sold per Unit

LAP

Linear External Antenna Kit LA-P AAE00366

Compatible with DVS-1200 DVS-2400 and DUAL-824 systems
Omni-directional external antenna
Antenna connector mounts inside case wire whip extends outside case
Compatible with EXA-1000 external antenna
Designed to enhance the radio range of Linear's DVS-1200 DVS-2400 and DUAL-824 systems.
The LA-P antenna Type F connector can also be used for coax connection with a remote mounted EXA-1000 antenna.

.......more details

FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
Control Board: model 780D

OTBH-6112-M-N1

Manaras Trolley Operator 1/2HP 120V 1Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain
Includes PHOTO-070

.......more details

MOD027B1

Manaras Universal Aux. Output Module B070 Red/Green 24V Modification

MOD027B1 modification only when bought with operator
Order MOD027B1 when ordered in conjunction with a commercial operator
Works with BOARD070

41C2762

LiftMaster Chain Assembly Kit 7' (041D3484)

Also known as: 41D3484 41A3484 41C2762
For use with various chain drive garage door openers that utilize a T-rail and have a 7' garage door

RN0037-SS

Roller 3" Black Nylon 7" Stainless Steel Stem Precision Sealed Bearing 6203

A supreme precision sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
100 lb load 100000 cycles of a 12' door
Stem Length - 6.69" which does not include the shoulder Overall Length - 7.97"

202-0022

TNR Composite Bottom Bar Arm for HDXL *** Price by Quote Only

RS-55

Roller Shutter Aluminum Model 55 Made to Order Pricing by Quote Only

The RS-55 is designed for use in large window roller shutters door recesses and small shopfronts.
Robust construction ensures high profiles rigidity while maintaining a well-shaped proportional appearance.
The RS-55 profile is available with or without perforation in a wide range of RAL-like colours.
The profiles have a very good colour fastness and high resistance to abrasion.
This profile is resistant to weathering.
Aluminium profiles are ecologically clean products.

.......more details

2376.187*31.930

Whiting Torsion assembly .187 wire size 31" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

BNC-M-F

BNC Adapter Male to F-Type Female Connector ** To Extent of Inventory

BNC male to F female connector
Designed for RG6 coaxial cables RG59 security camera etc.
Made of nickel-plated and gold plated contacts for better corrosion protection

EHJ-321-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 230V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

MOTOR383

Manaras Electric Motor 2 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

EHJW-311-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 120V-1Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

BCSI-PM27

Pivin Drapeau Sprocket & Bearing Assy BCSI Gate Operator ** Price by Quote Only

OWL-RC

EMX Infrared Programming Remote for OWL

OWL-RC is required for programming the OWL Motion Sensor

Quick Start Guide

MO00006

Micanan Gearhead Disconnect Spring

Dimensions: 0.92ID x 0.09G x 2.00"L

CDJH-34-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V with ECB Right Hand UL325

3 Button station (NEMA 1)
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

110635.0001.S

Overhead Electric Motor RSX 1/2HP 115/208/230V 1-Phase

MOD065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

Chain hoist for manual hand operation of standard lift doors equipped with trolley operators.
The 1" cross-header shaft (12' long) drives the front idler of the drawbar
For use with operators with #41 chain
When applicable it incorporates an electric cut-out and brake release cable
Hand chain for 14' high door is standard
Hoist assembly width is only 8.5"

.......more details

18211

Limit Switch LS1 G3M Male

For use with Rite-Hite dock levelers

WB-350

Skylink Multi-Function Wall Console New ATR Model Ops

For use with the Skylink ATOMS AT series garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

24856

Stanley Front Idler Kit for Chain/Cable Openers *** NLA

For Stanley Chain/Cable Openers Only
Not for Stanley Full Chain Openers
Replaces Part #920-0147

PTM-24V

EMX 7 Day Programmable Timer 24V

The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
With up to 16 ON/OFF events per day and 15 different daily options.
Its DIN rail mount design and wide power supply options (12 or 24 Volt) make installation easy.
The battery backup saves stored programs in the case of power loss.
Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.

.......more details

Instruction manual Spec sheet Comparison guide

MGH-6533-ECB-RH

Manaras 3/4 HP 600V 3P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

LMPK3-ST

LiftMaster HID ProxKey III 1346 Key Fob Price Per Fob

HID 26 Bit Format
125 kHz
Sold in Lots of 100 - Price Shown is Price per Card
Small enough to fit on a key ring
Universal compatibility with HID proximity card readers
Provides an external number for easy identification and control

.......more details

108207

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" 100/Bag

Indented Hex Washer Head
7/16" Head
Max RPM = 2000

LMDBPACK-OB

LiftMaster Yale Smart Touchscreen Deadbolt Oil Rubbed Bronze Finish Includes 821LMC ** NLA

Smartphone Control – Pair with included Lock Wi-Fi® Bridge to securely lock unlock and view door activity in the myQ® App.
Touchscreen Keypad – Wakes with a touch and has backlit numbers that won’t wear off.
Key Free – No key hole means no lock picking or keys to lose.
9V Battery Back-Up – Never worry about getting locked out due to dead batteries.
Works with Key by Amazon to provide a seamless delivery experience.
Eligible Prime Members simply download the Key by Amazon App and link it to your myQ account.

.......more details

Programming instructions Sell sheet

C-24X12-134-LEXBLK

Thermal Window 24" x 12" for 1-3/4" Door Lexan Black *** Special Order by Quote Only

For 1-3/4" thick door
Glass type: Polycarbonate (Lexan)

RN1124-10

Roller 2" Nylon 4" stem 11 ball White 10/PKG Sold per Pack

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.69"
Box qty: 15 packs of 10 Box weight: 49 lbs (2-4-11 White Nylon)

Z9003-QUIET

Pusher Spring - 27" w/Sleeve 3" Tip Sold as a Pair

Quiet pusher spring 27" long with a large 3" tip and PVC sleeve over tube
11lbs of initial pushing strength per spring+ 3lbs per inch per spring
Sold as a pair. Pair includes 1 LH 226841 and 1 RH 226842

SL585103UL

LiftMaster Industrial Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl. ***NLA

High-Starting Torque continuous-duty motor (available in 1/2 1 and 1 1/2 HP)
Operator Duty Rating: 20 cycles per hour
Wormgear Reduction: 20:1 Wormgear Reducer
Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
Chain: #50 nickel-plated (25ft. supplied)
Chassis: heavy-duty steel chassis and lockable powder-coated steel cover withstands extreme and harsh environments

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

LM56A

LiftMaster Magnetic Proximity Reed Switch

Normally Open magnetic sealed reed switch; proximity switch
Used for overhead door contacts.

Installation Manual

620-101293

Linear Apex II Module

Newer model from Jan 2016
The APEX II is backwards compatible but you will need to add monitored external entrapment devices.

050DCJCWFSD

LiftMaster Receiver Logic Board DC. WiFi CJO Sectional for LJ8900W

050DCJCWFSD is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi® with myQ® technology.
For use with various LiftMaster® Light-Duty Series Jackshaft Door Operators for sectional doors; manufactured after 2018.
The unit will feature a yellow learn button.

TRANSF112

Manaras Transformer 575V-24V-50VA

2510-273

Linear 230-Volt Heater for Gate Op

T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

144B18

LiftMaster Idler Pulley 2" OD 1/2" Bore

144B0018 is a idler pulley (2"OD 1/2"B) replacement kit. Compatible with Models ATS211 & ATS211R garage door openers. Check the manual for your specific model number before ordering.
Also known as: 144B0018 144B18

DOC-6000

Atlas Door Operator Board

The Atlas board has been discontinued the Lynx 6000 is a direct replaceement

SL595203UL

LiftMaster Dual Voltage Slide Gate Op.2 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325 ***NLA

UL 325 compliant system.
Power: 208/230/460/575 VAC. 3 Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Wiring diagram Wiring diagram 575V

MW00024

Chain Tensioner for 1"-1" Shafts Inside the Box