Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-H-7553U-RH

Micanan 3/4HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

38415A

Genie Chain Drive Sprocket

For Genie & Overhead Door Models
This is a 8-tooth sprocket with a hex drive bore
Genie Brand Models: Relia-G 600 Relia-G 800 1024 2024 QuietLift-600 QuiteLift-800 1042 2042 ChainLift-800 ChainLift-600
Overhead Door Brand Models With CHAIN DRIVE: Legacy 800 2026 Standard Drive 1026

MX00128-A

Micanan Clutch Pad 1-1/4" bore x 5" for PRO-GOHD *** No Longer Available

OCDFX2

Overhead Door 2-Btn Transmitter 315/390 Mhz *** No Longer Available

Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
Part Number: OCDFX2.S GIDFX2.S

Programming instructions Instructions de programmation

CHK-991

Chain Hoist Keeper

Chain hoist keeper is not the same as the chain keeper

F3100MBC

Linear Wireless Keypad with Intercom Estate Series *** No Longer Available

Increased Surveillance: Screen visitors and solicitors safely from inside your home
Superior Range: Crystal clear two-way wireless communication up to 500 ft. (152.4 m) without any obstructions
Stand Alone Keypad: Program up to 100 entry codes for added security
Motion activated backlit keypad
Kit includes 1 base station with rechargeable battery

LVB424-11

Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

BD3240

Piezo Warning Buzzer Alarm with Volume Control 24VAC/DC

2-1/2" long 90 DBA

91-00700

Truck Door Elevator Bolt 1/4"- 20 x 1-3/4" 1" head

Zinc plated finish

26CW94322-CUT

Truck Door Bottom Panel with Seal (12" x Cut-To-Size) Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

.......more details

26CW94222-CUT

Truck Door Bottom Panel with Hardware (12" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer

.......more details

886LMW

LiftMaster Motion-Detecting Control Panel Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls and set up Wi-Fi directly from the control panel
Light run-time is 4 1/2 minutes with adjustable light timer option
On/Off switch for deactivation of motion-detecting function

.......more details

CF-101-16

Commercial Side & Top Weather-Strip 16' Long Aluminum / Vinyl

Same as Garaga CF101

SL-300T

Skylink 1-Btn Visor Mount Transmitter 300MHz ***No Longer Available

Easy to carry or clip on sun visor.
Works in conjunction with Skylink Universal Receiver: Model SL-300R.
Operating range of 100 feet and more.
12V alkaline battery included.

50-ALMARM-DOT

LiftMaster 15 ft Aluminum Barrier Arm Square White Aluminum with Red/White Retro-Reflective DOT Tape

Used on BG770
Arm adaptor included
15' x 2.5" square arm
Replaces 50ALUMARM

CRBH751L5-LH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

CarWash Modification

LB406-14

Laminated Bumper Standard Black 6" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

GAREX-DOORFACE

Garex Special Order Door Face Only

Ordered to the customer's exact requirements

30257T

Genie Coupler Screw Drive Units

Used for attaching the screw of Genie screw drive rail to the motor head.
This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
To check and replace that part remove the two screws holding the rail to the main power head
Mounts on rear of opener rail and fits in motor head.

MB-03004

Micanan Electric Motor Only 1 HP 110/220V 1PH C-Flange TEFC 56C

C-Flange TEFC electric motor
Fits models: GT GH GHC & GSD

MX00034-208V

Micanan Brake Assembly for PRO-HHD with 208V Solenoid (MX00206-208)

Complete brake assembly including 208V solenoid - solenoid cover sold separately part #MM00011

BG770-50-53

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 575V 3 Ph *Discontinued Replaced by MATDCBB3*

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
2-btn control station Open/Close
Fully adjustable limit system
Pad mount
Security+ 2.0 technology

.......more details

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TRACK-GUARD-48

Track Guard 48" Tall Safety Yellow With Base Sold as a Pair

Provides impact protection to vertical track
45° angle flange adds strength protects from side impact.
7-gauge steel construction powder coated safety yellow for high visibility.
1/4” foot plate drilled with slotted holes for three 1/2” anchors.
Wall flange drilled with slotted holes for four 3/8” anchors
Includes: 60-5094 (right) and 60-5095 (left) sides

.......more details

48"Track Guard Shop Drawing - Left 48"Track Guard Shop Drawing - Right

029-98205

W-Style Replacement Door White Stainless Steel Package 029-98205

Replacement door size between 98" wide x 105" high
Painted white
Stainless steel package

28103

Pillow Block Bearing Cast Iron 1" Bore

ANT-2

Linear 3ft Mid-Range Antenna (SNE00002)

Antenna for Linear’s 27 MHz mid-range transmitters and receivers
Three-foot whip style
18 feet of coax cable included
”U” bolt included for post mounting
Dimensions: 2.25” W x 39” H x 2” D
Same as: SNE00002

.......more details

020C98290

W-Style PolyTrak Complete Replacement Door White Stainless Steel Pkg 020C98290

Complete replacement door is fully assembled maunfactured to exact size includes tracks operator assembly and side seals
Engineered polymer roll-up door
Galvanized steel reinforcement channels
Unaffected by heat and cold: -92F and +158F (-69C to 70C)
Panels never need painting color is molded in
White is standard but available in grey yellow or red.

.......more details

029-98100

T-Style Replacement Door White Stainless Steel Package 029-98100

Replacement door size between 98" wide x 100" high
Painted white
Stainless steel package
Includes Hinges Rollers and Cable

15-41B14LGH

Sprocket 14 Teeth 1" Bore 1/4" Keyway

Same as 15-41B14LGF

PRO-HBH-7583U-L

Micanan 3/4HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

STRUT-3-18'

Door Strut 3" Hemmed 18ft Long

Reinforcement bar 3"

25-10105

Truck Door 1" Steel Roller 3.25" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design

37408-PREWIRED

Doorlec Reversing Contactor BF9 120VAC Prewired for Single Phase

TRACK-3"-RAW-14

Raw Vertical Track 3" 14'-0" Sold per Piece

CH100

Contact Cleaner and Lubricant 325g ***NLA

Cleans both electrical and electronic parts.
Cleans dries and leaves a thin protective film.
340g / 11.5 oz spray can
12 cans per case

Safety data sheet Fiche de données de sécurité

MG00004

Micanan Belleville Washer 13/16 ID x 1-3/16 x 1/8 (8 required per operator)

PRO-H/HB operator parts
6 required per operator

.375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

DM54LC-COATED

Cable Drum High Lift 54" 400-54HL Specialty Coated Pair

Use for Commercial Highlift Doors
Maximum Door Height 120" + Highlift
Maximum Highlift 54"
Lifting Weight Per Drum 275 lbs.
Resists Chemical/Moisture Corrosion
Abrasion Resistant

.......more details

PRO-GH-10083U-L

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

41D96-1

LiftMaster Light Lens for 8500

Also known as: 108D96-1 41D96-1 108D0096-1

9150000630

1/4" Stops ONLY 100/pkg

Stops only - 100 per pack

9150000624

1/4" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

MT22-BLACK-U

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Universal Outlet

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MK-00430

Micanan Capacitor 240V/250V 70 Mf

For limited duty 110V operators

.273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Orange/Red

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

41D7742-5

LiftMaster Travel Module Kit 3/4 Hp

A one piece travel module replacement kit.
Compatible with 3/4HP LiftMaster® Models 8557 & 8587 and various AC chain and belt drive garage door openers
Same as 041D7742-5

MOV001

Manaras MOV Surge Protector

For 3-phase commercial operators
680V 1800V CL.V

K15-41B17LKGH

LiftMaster Q070 Output Sprocket

Sprocket for #41 chain

PRO-H-7511E-RH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

Installation manual Specification sheet

LIMIT020

Manaras Unimax Snap-Action SPDT without Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

41A2780

LiftMaster Chain Pulley Bracket Kit

Also known as: 1B3214 1A2780 1C2762 41A2780 41B3214
Compatible with ATS 2595 3595 models

255744-BEAD

Wayne Dalton Bead Style Bottom Seal Yellow Sold per Foot

Yellow T-astragal
Width: 4-3/8"

P220-2K

Heddolf 2-btn Transmitter 8-Dip Switch 318 MHz

Allstar compatible remote

P220-3K

Heddolf 3-btn Transmitter 8-Dip Switch 318 MHz

Allstar compatible remote

CABLE_1/4SS-250

Cable 1/4" 7x19 250' Stainless Steel

CP-SP-DISCONNEC

Lynx Hoist Spring MCJH CP-SP-DISCONNECT

34101

Doorlec V-belt Pulley 9" x 5/8" bore

Fits model ETB-3

19-41240D

LiftMaster Drive Chain #41 10' Box Black Oxide

#41 chain 240 links

K76-34740

LiftMaster Limit Passpoint Kit

Kit Includes: Learn Limit Switch Learn Limit Nut Limit Shaft Assembly Sprocket and Wire Harness
For RSL12V RSL12VH
Aslo called Learn Limit Assembly Kit

BG790-50-53

LiftMaster Industrial-Duty Wishbone Barrier Gate Operator 1/2 HP 575V 3 Ph Arm & Weight Incl

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
Standard Features: Control inputs and Adjustable limit settings
Heater sold separately
Includes 24 ft. wishbone arm with black and white stripes and two counter weights

.......more details

Installation manual Sell Sheet

110925

Allstar MVP-QC 3-Btn Quick Code Transmitter 318 MHz *** Discontinued

Compatible with all MVP receivers and operators
Quik-code programming no dip switches
Operate LED
Visor clip included
Power: Two 2032 batteries
Codes: 19683

.......more details

Programming instructions

G108019

LiftMaster Arm Clamp PVC

Used in connection with arm # G651209P

25-60007

Truck Door W-Style End Hinge Pin Package Set 50/Pkg

Pin packaged set consists of 50 x 1/4" pins only
Steel construction Zinc plated

7812

Whiting Bottom Seal Truss Door White 90" Long

Fits Fed-Ex truck doors

AIRSWITCH017

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit

The small radio transmitter unit and the pneumatic switch are packaged within the DW3S case while the receiver is built into a Nema 4 case
It is equipped with a NCC or a NOC relay
Battery is included # CR2032

Programming instructions

333857

Wayne Dalton T-Style Weather Seal Sold per Foot

Used on garage doors and mini storage doors
T = 7/16" wide – .438 Bulb is 7/8" x 7/8"

.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

34030308

Polyester Lifting Sling Type 3 Eye / Eye 3" x 8'

2-ply
Minimum tensile strength of 9800 lbs per inch of width

CHAIN031

Manaras Jackshaft Drive Chain #50 5' with Link

SL332-ZP-COPPER

Zinc Plated Copper Sleeve 3/32" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST332COP. Stops are not zinc plated

92-00005

Truck Door Hex Nut 5/16"-18

Cross ref: W #10.1033.2 for both #2376 & #7176 balancers

OCS-PANEL

GDI Panel Buttons Open/Close/Stop N1/ N4 G3253

Power LED

CR-2

Battery CR2 3V Photo Lithium Battery

Camelion brand

27-24200

Truck Door Single Torsion Spring Assembly 96/60 for Todco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 96" Spring Length: 60" Wire Size: .243
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire
Heavy-duty cast aluminum cable drums hold up to 130" of cable

.......more details

.218-325-DS75

Mini Storage Spring for DS75 4x7 Door

Spring only with loop ends

Q239

LiftMaster Limit Switch Wire Harness K70-51094 **DISCONTINUED

Includes harness and 4 limit switches for Miracle One

JY-10

Devanco Solvent & Degreaser 400g

General purpose solvent and degreaser
Contains natural citrus oils. Cleans oily greasy and dirty surfaces.
Dries quickly and leaves no residue.
Approved by CFIA.

Safety data sheet Fiche de données de sécurité

8360WLB

LiftMaster 3/4 HP DC Premium Series Chain Drive Wi-Fi Lock with BBU Capability **To extend of inventory

Built-In Wi-Fi® for the easiest way to connect the garage.
Real-Time Alerts indicate the status of the garage door via email or push notifications.
Monitor and Control the opener from anywhere using mobile devices.
Consume up to 75% less power in standby mode.
Soft Start/Stop for smooth operation.
Safeguard your household with Security+ 2.0™-with every click a new code is sent to the Garage Door Opener so the door opens only for you.

.......more details

8355W

LiftMaster Premium 1/2HP AC Belt Drive Wi-Fi

Free MyQ® Mobile App so users know their home is secure.
Built-In Wi-Fi® for the easiest way to connect the garage.
Real-Time Alerts indicate the status of the garage door via email or push notifications.
Monitors and Controls the opener from anywhere using mobile devices.
Belt Drive system for quiet maintenance-free performance.
Motor Vibration Isolation System (MVIS®) provides quiet reliable operation.

.......more details

Installation manual Sell sheet Brochure Receiver Logic Board Conversion List

MG020-B-2E-04

Miller Edge Sensing Edge Black 2-Wire End Outlet 4ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

DM518-COATED

Cable Drum Specialty Coated Standard Lift 18' 5250-18 Pair

18' standard lift with special protective coating.
Features bimetallic corrosion protection
1000 hr. salt spray performance
Abrasion resistant chrome free excellent corrosion protection
Pair includes: (1) LH and (1) RH.
Color coded: Red=LH and Black=RH

.......more details

.343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

42RLU-4003B

Allen Bradley Retro Reflective Photoelectric Sensor Long Range 24V *** No Longer Available

Infrared photocell
Sensing distance: 35ft
Output type: DPDT EM Relay
Operating voltage: 18-28V AC 20-32V DC

PROROLL4

Cantilever Roller 4" Round Post with Covers Sold as a Pair *** Discontinued

3100 pound rating
Integrated polyurethane cover for safety ensuring UL325 compliance
Sealed bearings for maintenance-free operations
DuPont™ Delrin® injection molded for smooth quiet movement
High-precision roller for water resistance and industry's best overall temperature rating

200BL-10

2" Light Brush Insert 10ft Long

Polypropylene bristles
Same as MS1703-120

WB-300

Skylink Multi-Function Wall Console ***For Old EQ Models

For use with the Skylink garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

GD-STEND-21D

End Cap Steel 18G 21" Double 1-3/4"

K94-37236

LiftMaster Universal Solar Harness Kit

For 7 Ah and 33 Ah batteries

39438R

Genie Garage Door Opener LED Bulb LEDB1-R 1/Pkg

Unlike other LED and CFL bulbs this bulb will reduce or eliminate radio frequency interference
Uses 10 watts but equivalent to a 60-watt bulb
Works with almost all garage door openers
Lasts up to 25000 hours
Shatter-resistant vibration-resistant
Cold weather rated up to -30C

.......more details

1058050002

Overhead Limit Cam Snap On for OHD Chain Model

For Overhead models #456 #551 #556 and the #65 series
Also called Limit Actuator
105805-0002

41A2825

LiftMaster Opener Assembly Hardware Kit

Kit includes screws for various residential chain drive models

C-24X12-134-W

Thermal Window 24" x 12" for 1-3/4" Cedo Door White

For 1-3/4" thick door

IRB-MON-RX

EMX Monitored Receiver Board Only

Receiver board only for IRB-MON

26-943255

Truck Door Bottom Panel with Seal (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)