Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
4059GY-216

Garex Thermo Moulding 3/4" Beading Gray 18ft

  • White and Black also available
804

Fasteners Sleeve Anchor 3/8" x 4" 50/Box

  • Secure anchoring into concrete brick or block
DM120-T/FORCE

Cable Drum High Lift 120" D575-120-1 Pair Torque Force

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
.243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
50220

Doorlec Lifting J-Arm Assembly Trolley

100BL

1" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1701
FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz

  • Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
  • Contains 10 DIP switches inside for coding.
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
K41-0239-000

LiftMaster Idler Sprocket Qty 2 INSL24UL

21-14182

Transformer 120-240V 24VAC 20VA

  • 120/240V Primary 24V Secondary 20VA 50/60 Hz
  • Same as K21-14182 used on L5 commercial operators
R2AES

Erone Radium 2-Button AES128 Encrypted Transmitter

  • Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes.
  • The code sent by the transmitter changes at each activation removing any scanning and copying risk.
  • A special algorithm ensures a continuous synchronization between the receiver and remote.
  • Includes AES128 encryption
  • Compatible with RADIUM AES128 receivers
  • Heavy-duty construction
    • .......more details
31376-2

Doorlec Sprocket 60B65 2" Bore

10TD900PB

BEA Wired Transmitter 900mhz Flagged Flag Connectors AAA Battery

  • Multi-colour LEDs on receiver provide installer with visual notification of signal strength and activation status.
  • Frequency: 908-918 MHz
  • Radio Control Type: Digital
  • Programmable Capacity (standard): 75/unlimited universal
  • Operating Temperature: -10-55C
788-037-2MX

Blue Giant Hold Down Assembly Rewind Style Compete

  • Holdown Aircraft Cable Rewind Style Blue Giant-Complete
K15-50B18QGX

Output Sprocket for SL595 and SL595UL

  • This is a replacement Output Sprocket. Compatible with LiftMaster® Model SL595U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
MX000585-0

HySecurity Smart Touch Controller Board

  • Easy Installation Configuration
  • Warning Buzzer and Alarm System
  • Ethernet Connectivity via HyNet Gateway
  • Security Monitoring and Breach Reporting
  • Allows for the configuration of over 70 different settings for a reliable and highly customized gate operator
1-0418

RW Bow Handle Black Steel

  • Size: 191
  • Steel drilled for 1/2" dia bolt
  • Overall size: 13-1/2" h x 2" w. Handle projects 2-3/4" from doorface
  • Length of Grip: 8"
  • Depth: 1-7/8"
EIM-101

Miller Edge Electronic Interface Module w/Junction Box (JB-02P-W)

  • Designed for use with pre-UL325-2010 commercial door operators and Miller Edge CPT sensing edges.
  • It's a durable weather-resistant solution housed in a NEMA 4-rated junction box.
  • This module is particularly suited for overhead doors using retracting reels or coil cords
OSH-6813-M-N1-RH

Manaras Opera-SH 3/4 HP 208V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
111-0060

RW Box Track #33 Black 8ft Up to 700lbs

  • Finish: Black enamel
SP8-ARM

LiftMaster 8 ft. Arm with Yellow Padding. Requires MA031 ordered separately

  • Padded arm for MASDCBB3
OGH-6114-M-N1-RH

Manaras 1 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
TDC22X1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 60 Cycles/Hr 2200LB

  • Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
  • Faster Speed - Average of 12” per second opening on sectional doors.
  • Battery Backup Option - (battery backup kit sold separately).
  • Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
  • Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
  • Drive Type 65:1 Gearbox with #50 Chain Output
    • .......more details
1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
2110-274

Linear Clutch Shaft Assembly HSLG UPS

201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

10-10354

LiftMaster Brake Release Arm

  • his is a replacement Brake Release Arm. For use with various LiftMaster® Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
  • Also known as: 106106
CPT210-END-KIT-U

Miller Edge Universal End Kit for CPT210

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
BMT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator with Solenoid Brake

  • 1/2 HP 120 volt 1 phase medium-duty logic trolley operator with brake
  • Medium-duty logic board with integral 315 MHz radio receiver
  • CPSU commercial photoeyes included
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
  • 2 year warranty
    • .......more details
RCB-DCB3-PRO

Pro Cut Handheld Chain Break #50 Chain Max Version 3

  • Adjustable chain holder accommodates #65 chain up to #50 chain
  • Quickly and easily handle chain rivet removal saving you time and effort
  • Includes two replacement pins inside the handle chamber
BMA3

NICE Release with Lever for Newer Big Metro Ops

H11G02-SS

Hinge #2 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
TDC41-12

LiftMaster Trolley Chain Pack #41 1200/2200LBS 12ft Door

  • Chain pack only
  • TDC41-12 is a #41 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 12' commercial doors
BCSI-PM18

Pivin Drapeau Retaining Ring *** Price by Quote Only

T/F-H/CHAIN-YELLW

Canimex Hand Chain 31.4 Yellow Zinc Plated Sold by Barrel Only 1000ft 173772

  • Yellow Zinc Plated Steel 31.4-19-4.55 sold in 1000' barrel
  • For use with specific Torque Force chain hoists ie 200R (244687)
  • This chain will NOT work in the hoists that use the 30.7-19-5 chain
  • works with Micanan / Nice Commercial operators
OSH-6532-M-N1-LH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
CP35

Roller Chain Puller 35-60

  • Allows chain to be pulled together for attachment of the master link
  • For 35 thru 60 chain
OTBH-6212-M-N1

Manaras Trolley Operator 1/2HP 240V 1Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
  • Includes PHOTO-070
    • .......more details
E14500D

Cable Tie KSPEC STD 50 LB Black 14" Nylon 500/pkg

  • Length: 15" Width: 5.0MM (0.187")
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
31373-114

Doorlec Sprocket 60B36 1-1/4" Bore

CGH155L5-RH

LiftMaster Gearhead with Carwash Mod and Brake 1-1/2 HP 575V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

  • Fits HSLG GSLG-A Ups
5-38-10

2" Horizontal Track Set 8'6" (7ft Door) 10" Radius 16ga 2-pcs

  • Left/Right hand horizontal track set 10" radius
  • Garage Door Residential usage
2110-236

Linear Shaft Output Assy HSLG Ups

K177A0112

LiftMaster Trolley Spring

  • Also known as: 177A112 62274 177A0112 062274 132C2180 177A78
GALV-331-334-144-R

Torsion Spring .331 x 3-3/4" x 12ft RH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
OMJ-6112-M-N1-R/L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes RH/LH

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
K75-17034

LiftMaster Heavy-Duty Straight Door Arm Assbly

  • For use with various LiftMaster® Logic 4.0/5.0 and DC MAXUM Industrial-Duty and Extended Duty Jackshaft Hoist Commercial Door Operators
XF208VAC12

LiftMaster 208V Transformer Kit 1200

Q520

LiftMaster Wiring Harness Kit CSW Motor K94-50286

  • Compatible with LiftMaster® Model CSW200UL Swing Gate Operators
41151R

Genie Light Kit Wall Mount

  • Bluetooth Light Assembly for the Genie #6070 & 6170 Wall Mount garage door opener.
  • Replacement light kit for 39945R
2400-416

Linear Dowel Pin .3752 dia x 2" Long

GH-353-3

Doorlec Industrial Gearhead Door Operator 3HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
GEAR001

Manaras Bevel Gear GH/MGH 5/8" 20 Tooth

PHOTO-073

Manaras Non-Monitored Intrinsically Safe Retro-Reflective Photocell 30' Range incl. 3" Reflector

  • Retro-Reflective photo cell
CAPXSHOOD

LiftMaster Sun Hood for CAPXS Black

  • Sun Hood exclusively for installing with Model CAPXS – Smart Video Intercom S.
  • Provides simple protection for the CAPXS touchscreen for better visibility when mounted in locations with direct sunlight.
  • Fully compatible with the CAPXSTK Trim Kit accessory and CAPXSTK Trim Kit with Postal Lock for a clean aesthetic installation.
  • Dimensions: 6.15” x 4.13” x 4.74”
GALV-295-334-144-L

Torsion Spring .295 x 3-3/4" x 12ft LH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-218-2-144-R

Torsion Spring .218 x 2" x 12ft RH Galvanized Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
CAPXS

LiftMaster Smart Video Intercom - S

  • Designed with small multi-tenant buildings and single family gated homes in mind.
  • With the myQ Community app residents can see who is at the door before granting/denying access.
  • Integrated wide-angle camera: Lets you view entrance through a live feed or recorded event.
  • Integrated BLE radio enabling myQ Mobile Credentials: Ultra-secure encrypted access with the resident’s smartphone.
  • Cloud-based security: Keeps data protected and safeguards residents’ information. *All LiftMaster Smart Access Solutions (including CAPXLV CAPXLV2 CAPXM CAPXS CAP2D and CAPAC) require monthly subscriptions to a myQ Community plan.
OPH-6114-M-N1-RH

Manaras Opera-H 1 HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
BEA-10FALCON-EX30

BEA Falcon Motion Detector w/Exp Proof Housing 30ft Cable

  • FALCON EX combines a microwave activation sensor with an explosion-proof/flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX: 13’×16’ at 16’
  • Operating temperature: -22 to 140F
    • .......more details
OSH-6213-M-N1-RH

Manaras Opera-SH 3/4 HP 240V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
XLSOLARCONTUL

LiftMaster Solar XL Control Box Battery/Harness Not Included

  • Includes LMRRUL Retro-Reflective Monitored Photoeye
  • Compatible with LA400 LA412 LA500
  • Does NOT include the battery or harness. A12330SGPLK sold separately
301010

Whiting C-4 Anti Lozenge Bracket Curb Side ** Price by Quote Only

DS-REPAIR-KIT

Inflatable Dock Seal Patch 30" x 30" Vinyl with Glue

OGH-6115-M-N1-RH

Manaras 1-1/2 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
110001-BULB-PER-FT

Janus T-Bulb Astragal Black Sold per Foot

  • Fits Janus mini storage doors M650
  • Bottom weather seal only no retainer
620-100989

Linear Heater Kit Assembly 115V Cage Style

  • Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)
CRBH501L5-RH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
OGH-6533-M-N1-RH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
2806.171.250

Whiting Spring Assby .171 x 2-3/16 x 25" L Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 25" Long
  • Roadside
  • For Curbside order part # 2807.171.250
GDI-HB331

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1-1/4" Shaft Non Monitored

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
89029.0040

Todco Carriage Bolt SS 1/4-20 x 1-1/4" Splined

EHJW-321-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 230V-1Ph

  • Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
ZAP-8070

Zap Auto Lock 8070

  • 8070 Auto-Lock provides integrated security with an electronic solenoid locking system that releases a shoot bolt above a roller when door is stopped and withdraws prior to door operation
HA-434TL

SkyLink Wireless Motion Sensor

  • Supervised Sensor: monitors the sensors and their battery condition automatically
  • Motion detecting range: 40 feet.
  • Operating range: Up to 800 feet.
  • Easy to set up (Battery not included).
  • FCC/IC approved.
  • Sensors are weatherproof but not waterproof. Sheltering it from the elements is recommended
    • .......more details
MP00228

Micanan Track and #41 Waterproof Chain for 14' h Door

MB-01303

Micanan Electric Motor Only 3/4HP 110V 1PH 3-Wire Base Mount FR56

  • Base Mount motor O.D.P. FR56
  • Used on Micanan's T TB APT J EJ H EHJ HHD & SD
SD751L5-LH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
C-20X14-134-W-OLD

Thermal Window 20" x 14" for 1-3/4" Cedo Original White Old Style

  • For 1-3/4" thick door
  • Old style with round screw heads
  • Glass Dimensions: 17-3/4" x 12-11/32"
  • Hole Size: 18-3/4" x 13-3/8"
  • Exterior Frame: 19-3/4" x 14-3/8"
SA1929/A19

Automatic Systems Retrofit Logic Board with Drive for BL229 Board and Double Channel Loop Detector

  • Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
  • Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)
210-0040

TNR Doors CurtainLok Assembly Kit Grey 5/ Kit (10 pcs) ** Price by Quote Only

  • 5 complete curtain locks with fasteners per kit
21-7575-1

LiftMaster Transformer 575V 3 PH

  • For use with various LiftMaster® Logic 5.0 NEMA 4 and 4X Commercial Door Operators
RN0035-SS

Roller 3" Black Nylon 4" Stainless Steel Stem Precision Sealed Bearing 6203

  • A supreme precision sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 100 lb load 100000 cycles for a 12' door
  • Overall length is 5.17” and the shaft (stem) is 3.90” which does not include the shoulder.
D029

ODCC Fire Door Adjusting Wheel

102-0002

TNR Hardener CH-EST-002 Black 24/Box

  • Shaw Almex
102-0048

TNR Flexam EM 4/1 0+05 Black Weave Repair Sold per Inch

OSH-6213-CONT-RH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
BRKIT002

Manaras Brake Resistor for 240V Rapido

  • Added option to RSH or RVH operators
Wiring instructions
ZAP-8825-3

Zap 8825 Series-3 1HP 115V Medium Duty Jackshaft Op

  • Compatible door sizes: Up to 240 sq. ft./1200 lbs.
  • Contains the motor two pulleys & one belt
  • Requires 7” side clearance & 3 ½” clearance above center spring shaft
  • Features include auto close timer cycle counter and service due reminder
  • Auxiliary capabilities include interior/exterior lighting wall controls swipe card devices dock equipment motion sensors alarm systems & more
  • Simple installation of motor assembly to spring shaft
    • .......more details
OVERLOAD003

Overload Reset 3-Phase 1.8 - 2.6 Amps

MOD163G

Manaras Heater in Reducer & C-Box 575V-3P 24VAC 15W + 30W

  • This modification is an option when ordering a commercial operator
BRKIT001

Manaras Brake Resistor for 120V Rapido

  • Added option to RSH or RVH operators
Wiring instructions
MINIDEPTH001-MOD

Manaras Minimum Depth Mod. OTH OTBH

  • Always use chain #41 with this mod.
23105

Doorlec U Bracket Control Cabinet Support - Rear

  • Works with various models such as ETBHW ETHW
RSH-6114-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 120V With Elect. Board N4X Thru Beam Eyes Left Hand

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
GHW-383-2

Doorlec Industrial Gear Head Door Operator 2 HP 208V 3P with ECB and Nema4 modification

  • Extra heavy-duty industrial-type electric door operator for damp environments.
  • Worm gear reducer 40:1 ratio
  • #50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter (also called friction clutch)
  • Rotary type limit switches
    • .......more details
30B652

LiftMaster Capacitor 89uF 120V

  • Also known as: K030B0652-1 30B0652 030B0652-1 030B0652