Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
.363_3-3/4"-LH

Torsion Spring .363 x 3-3/4" x 12ft LH Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
AA

Battery AA Alkaline Duracell Procell Sold Individually

  • Sold Individually
41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

  • Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003
Installation ManualManuel d'Installation
29-31244

LiftMaster Relay 24VDC 6-Pin DPST (A & B Relay) All Operators

K001A6424-2

LiftMaster Circuit Board Assembly Kit 2008 315 MHz *** No longer available

  • Replacement circuit board for Medium-Duty Logic Commercial Operators
  • Used on models MJ MH MHS MT BMT and MGJ (non- UL325 compliant operators)
  • 315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch
Installation Manual
41AC075-2S

LiftMaster Circuit Board Assembly for Single and Double Capacitor Models 315Mhz

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
CAM005

Manaras Limit Cam 5/8-18 UNF

  • Limit cam for Mountshaft009
  • 2 cam's required per shaft
19-48ML

Master Link #48

  • For #48 chain (#410)
  • Same as #65 chain
21-14182

LiftMaster Transformer 120-240V 24VAC 20VA

  • 120/240V Primary 24V Secondary 20VA 50/60 Hz
  • Same as K21-14182 used on L5 commercial operators
41A6102

LiftMaster Power Door Lock Connector with 2 pins

  • For Jackshaft models
.406_6"-RH

Torsion Spring .406 x 6" x 12ft RH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
.331_6"-RH

Torsion Spring .331 x 6" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 6"
  • Length: 12 ft
12563

Doorlec Upper Brake Shoe - Right ** To extent of inventory

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
17310

Doorlec DC-3000T2 2-btn Transmitter 313 MHz

  • One block of 10 dip-switches for programming
  • Will activate 2 Doorlec 17307 receivers (DC-3000R)
  • Includes visor clip and 9V battery
Programming Instructions
MI00006

Micanan VBelt 5L 32.5" 5L325

LYNX-RCVR-OCS

Lynx O/C/S Receiver

  • For use with Lynx o/c/s transmitter # T3B-OCS
Compatibility chart
H14GHALF

Half Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 1-5/8" wide with slotted holes
H14G04

Hinge #4 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #4 position
  • Use between sections 4 and 5
  • Same as part number 244
    • .......more details
SEA433

Erone Tuned Antenna 433MHz

  • Increase reception and/or range
  • 11.5ft (3.5m) coaxial cable (RG 58) included
  • L-Shaped bracket for wall-mounting
Wireless System Chart
SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse latched or timed relay output
  • Power requirements: 12/24Vac/dc
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
    • .......more details
Instruction ManualSell SheetWireless System Chart
DISCONNECT001

Manaras Floor Level Disconnect Lever

STATION078

Manaras 3-btn Push-Button Control Station Nema 4/12

  • 2 N/O contacts and 1 N/C contact for stop.
  • Surface mount.
Sell sheet
8331.96

Whiting Brush Top Seal assembly 96"

  • Fits Coldsaver and Tempguard
831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

  • Three channels - three relay outputs
  • Textured aluminum case
  • Terminal strip for wiring
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC
    • .......more details
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
    • .......more details
Programming Instructions
MCT-11

Linear 1-btn MegaCode Transmitter 318 MHz

  • Activates one 318 MHz MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
218954-03

Linear Pulley & Bracket Assembly - Belt (HBT)

RV-300

3" Vinyl Insert for Brush Retainer per foot

  • Color: Black
4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
4007-6FT

Aluminum Retainer only for Light Brush 90 degree***Actual Length 6'1"

  • For angle application (90 degree).
  • For use with Light Brush or Vinyl Insert.
4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
4001-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1019-1-3/8-24'

Rigid Vinyl Bottom Retainer Flat 24' Long

  • Black - for door thickness of 1-3/8"
1014-1-5/8-10'

Rigid Vinyl Bottom Retainer Notched 10' Long

  • Black - for door thickness of 1-5/8"
1006-2-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-1-3/8-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1005-2-24'

Aluminum Bottom Retainer U-Shaped 24' Long***Actual Length 24'4"***

  • For door thickness 2"
1005-1-1/2-24'

Aluminum Bottom Retainer U-Shaped 24' Long

  • For door thickness 1-1/2"
7001-18-BROWN

Commercial Side & Top Weather-Strip 18' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1003-1-3/8-8'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
7001-12-BROWN

Commercial Side & Top Weather-Strip 12' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1104-16FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-7FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
HSC-600-B

Bench Swager 1/16" - 3/16"

  • Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
  • Wire rope cutting capacity 3/16”
  • Made in Japan
BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .3750 - .4305
1001-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

  • Aluminum retainer with black dual-fin vinyl
32-48-110

Extension Spring 8' Door - 110 lbs White ** Replaced by 27-48-110

  • Double - Loop
  • 32" long 48" stretch 110 lb load
  • Springs sold individually
Spec Sheet
25-42-170

Extension Spring 7' Door - 170 lbs Orange

  • Double - Loop
  • 25" long 42" stretch 170 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

  • Double - Loop
  • 25" long 42" stretch 220 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-3
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
26-40400

Truck Door Dual Durometer Side Seal 5/16" Track Spacing 114" Long for Whiting Dryfreight Doors

  • Allows for easy door operation.
  • Seal protects cargo area from dirt and moisture
  • Will not bunch up as bottom panel goes around top curve.
  • Co-extruded using rigid PVC backing with flexible PVC seal against the door.
  • For use with right angle vertical track
  • Fits only right angle vertical track assembly.
    • .......more details
26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
25-10578

Truck Door Handle Keeper Only for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish.
  • Keeper accomodates padlocks and trailer seals
  • Cross Reference: W #7515
SF375

Spring Fitting 3-3/4" Pair (Long Ear)

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
    • .......more details
H11G05

Hinge #5 x 11 gauge

  • 11 gauge # 5 hinge - 0.76 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G02

Hinge #2 x 11 gauge

  • 11 gauge # 2 hinge - 0.69 lbs
  • Bright zinc-plated
  • For use with 7/16" stem rollers
RN0024

Roller 2" Nylon 4" stem Black Sold per Roller

  • Black Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.75"
  • Box qty: 250 Box weight: 58.2 lbs (2-4 Black Nylon)
  • No bearings in head
25-10300

Truck Door Cable Anchor Bracket Zinc

  • Steel construction Zinc plated finish
  • Allows proper rotation of cable head
  • Cross Reference: T #61204 W #4004 240000
25-10050

Truck Door Center Hinge Zinc for Todco Roll-Up Doors

  • Zinc plated Steel construction
  • Cross Reference: T #61196 T #59126 W #4012 220100
D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

  • Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
  • Works with most LiftMaster gate operators
  • Won't work with Elite Series Mega Arm Slide & Swing
  • Simply plug it into the harness already in the operator
  • Loop lead-in wires connect to operator terminal strip
  • Gold plated control contacts
    • .......more details
Installation ManualSell Sheet
25-01431

Truck Door Stainless Cables 105" 5/16 eye 7x19 Pair for Roll-Up Doors

  • Works with both Whiting and Todco doors
  • Cable size: 1/8 "
1104-8FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 8' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
GC-100

Devanco Foaming Glass Cleaner 538g

  • A powerful foaming glass cleaner goes on thick does not run and wipes off clean
  • Does not leave streaks or an oily film on the glass
  • Virtually odorless
Safety data sheetFiche de données de sécurité
4X4PO50

Devanco Loop 4' x 4' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
LLB620-22

Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • This model has angles on both sides
    • .......more details
SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

  • Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
HSLG-121

Linear Commercial Slide Gate Operator 1 HP 230V 1 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
25E10003

Truck Door Roller Cover for End Hinge Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Cross Reference: W #1208 T #70161
TM1-PLUS

Programmable Timer 1 Sec - 4 Hrs 12/24V DC

  • 6 modes of operation : Delay on operate Delay on release Latching #1 Latching #2 Pulsing #1 Pulsing #2
  • Adjustable from 1 second to 4 hours with programmable dip switches LED status indicates when timer function is active
  • Microprocessor based / controlled clock for accuracy of 2%
  • Operates on a power supply of 12vdc or 24vdc
  • SPDT relay output : 5 amp 24vdc contacts
XLSOLARCONTUL

LiftMaster Solar XL Control Box Battery/Harness Not Included

  • Includes LMRRUL Retro-Reflective Monitored Photoeye
  • Compatible with LA400 LA412 LA500
  • Does NOT include the battery or harness. A12330SGPLK sold separately
MJ00013

Micanan Brake Shoe and Drum Assembly

  • Fits Micanan models: TB APTB JB HB HHD LH LJ & SD
  • Assembly includes: Both right & left brake shoe and the drum
K77-39428

LiftMaster Replacement Cover CSW24UL

  • Cantilevered cover
  • Includes labels keys cam-lock assembly
  • Sliding-latch door for reset switch
  • Protects internal gate operator components from exterior tampering weather damage
.234_1-3/4"-RH

Torsion Spring .234 x 1-3/4" x 12ft RH Blue/White

  • Wire size: .234
  • Inside diameter: 1-3/4"
  • Length: 12 ft
300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

  • Universal 11-pin harness
TS125

Wayne Dalton Thermospan 125 Steel Panel

  • Wayne Dalton’s Thermospan® Model 125 sectional door features a foamed-in-place polyurethane core
  • Standard joint seal that provides a substantially higher thermal efficiency than industry standard polystyrene insulated doors
  • The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented roll-formed integral struts on each section making them the most rigid doors available
  • Thermospan® Model 125 is suitable for commercial and industrial applications.
37516S

Genie Belt only for 8ft Door

  • Replacement belt only for 8ft door
  • Fits Genie model Destiny 1200
02-103

Push Button Station 3-btn Surface Mount Metal Housing

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
.207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
32-48-240

Extension Spring 8' Door - 240 lbs Blue ** Replaced by 27-48-240

  • Double - Loop
  • 32" long 48" stretch 240 lb load
  • Springs sold individually
Spec Sheet
K41-0245-000

LiftMaster BLDC Power/Motor Drive Board IHSL24UL

  • Replacement Brushless DC Power/Motor Drive Board Service Kit
  • Compatible with the following models: INSL24UL INSL24ULMC
365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad
  • Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT
Programming InstructionsInstructions de programmation
K74-30754

LiftMaster Battery Harness 1 unit only

  • For LA400
  • 2 harnesses required per operator- 1 for each battery
.375_6"-RH

Torsion Spring .375 x 6" x 12ft RH Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
SD755L5-LH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 575V 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
MOTOR254-WIRED

Manaras Electric Motor 1/2HP 120/240V 1PH Wired

  • Continuous-duty base mount 60Hz
  • This item is compatible with BRAKE011
1104-10FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 10' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
VBELT_4L310

Lynx VBelt 4L 31" (4L310)

  • Fits the old Lynx 455 garage door opener
MRGHB-6436-M-N1-LH

Manaras 2 HP 480V 3P Jackshaft Monitored w/N1 Eyes with break Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MW00024

Chain Tensioner for 1"-1" Shafts Inside the Box

  • Chain spreader for installation with 1" operator shaft & 1" door shaft.
  • Includes 2 shaft collars and set screws.
19-41HL-NP

Half (Offset) Link #41 Nickel Plated

  • For #41 chain
CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

  • Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
  • Polarized photo-eye design for a safe retro-reflective photo-eye system
  • Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
  • Range up to 30 ft - indoor use only
  • 24VAC operation
  • Color: Yellow
    • .......more details
Installation Manual
38563R

Genie KIT PCB ASSYNEMA 7/9

PDC-300-050-1-40/50-20-WP

Pulse 300 Direct Drive Opener1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable Weather Protect Option

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
OTBH-6434-M-N1

Manaras Trolley Operator 1 HP 480V 3Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • Includes PHOTO-070
MRGHB-6537-M-N1-LH

Manaras 3 HP 600V 3P Jackshaft Monitored w/N1 Eyes with break Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MRGHB-6537-M-N1-RH

Manaras 3 HP 600V 3P Jackshaft Monitored w/N1 Eyes with break Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
OPH-6234-M-N1-LH

Manaras Opera-H 1 HP 208V 3Ph Monitored Board w/N1 Eyes Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
MGH-6537-M-N1-LH

Manaras 3 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection