Devanco Canada - Get The Right Garage Door Opener‎ and Parts

FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
Control Board: model 780D

OTBH-6112-M-N1

Manaras Trolley Operator 1/2HP 120V 1Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain
Includes PHOTO-070

.......more details

2000D

Chain Hoist Direct Drive Assembly 2000 D

Sectional door Direct drive - 1" shaft
Requires keyed shaft
Includes: 2 shaft collars Chain Keeper 1/4" Square Key 2x set screws 5/16-18
Fits 5-1/4" min. offset
Includes 26' of chain
Ratio: 1:1

.......more details

PRO-4X_MOD-1PH

Micanan Nema 4X Modification 1/2HP- 1.5HP 1-Phase

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
1/2HP to 1.5HP Motors

K41-0246-000

LiftMaster Limit System Encoder IHSL24UL/INSL24UL

Compatible with the following models: IHSL24UL INSL24UL

K41-0244-000

LiftMaster BLDC Power/Motor Drive Board INSL24UL

Replacement Brushless DC Power/Motor Drive Board Service Kit
Compatible with the following models: INSL24UL INSL24ULMC

BCSI-PM204

Pivin Drapeau Threaded Chain Tensioner BCSI Gate Operator ** Price by Quote Only

CAPACITOR024

Manaras Capacitor 250V 70 uf 50/60Hz

For limited duty 110V operators

NIR-50-325-KIT

EMX Retro Reflective Photoeye Kit UL325 NC/10K Across NO Contact EMX-5255-K

Kit includes photoeye with hood reflector with hood and mounting bracket
Retroreflective configuration
NC and 10K monitoring
50 ft. operating range
Sensitivity adjustment
Wide range operating voltage

.......more details

Installation Manual Specification Sheet

34102

Doorlec V-belt Pulley 9" x 1" bore 5L

Fits model ETBH

MG020-Y-2E-P/FT

Miller Edge Sensing Edge Yellow 2-Wire End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

SBB-2-V3

2" Safety Bottom Bracket European 231721 Sold as a Pair Torque Force

Includes 1-Right hand and 1-Left hand
Zinc plated Steel
Max Door Weight: 1000 LBS
Cable attachment: Adjustable
Protective cover: Yes
Use with: Straight track 2"

.......more details

87802

LiftMaster Elite Series HD 3/4 HP DC Chain Drive Wi-Fi with BBU ***NLA*** Use 4690L instead

Drive system: Chain drive
Horsepower: ¾ HP Equivalent DC Motor
Voltage: 120V AC 60 Hz
Backup battery included for operation even when the power is out
Soft start/stop for smooth operation
Integrated Wi-Fi and Bluetooth

.......more details

87802 Installation-manual 87802 installation-manuel Receiver Logic Board Conversion List Comparison Chart

ETBH-383-3/4HP

Doorlec 3/4HP 208V 3P Trolley Door Opener with solenoid brake

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.

STATION086

Manaras 3-btn Push-Button Control Station Nema 1 Flush Mount

2 N/O contacts and 1 N/C contact for stop.
Flush mount.

42208

Doorlec Z Bracket Control Cabinet Support - Front

Works with various models such as ETBHW ETHW

1KXS

Key Switch O/C w/Stop Btn Tamper Proof Nema 4 Surface Mount

OPEN-CLOSE with Center Return Key Switch with Stop Button Mortise Cylinder Tamperproof
Dimensions: H=4-3/8 W=4-1/8"" D=2-5/8""
Randomly keyed

ALUM-570

Aluminum 24" x 100' Spool Storm / Gris Orageux # 570

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 570
Reverse side is #431 Bright White

Colour chart

20FT-TROLLEY-SET

LiftMaster 20ft Double Angle Rail Set for Comm. Trolley Ops (2 pcs)

Double Angle Rails for doors up to 20' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us

ALUM-5P2

Aluminum 24" x 100' Spool Rockwell Blue / Bleu Rockwell # 5P2

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P2
Reverse side is #431 Bright White

Colour chart

C-334-DUPLEX_INSTALLED

Spring Fitting Pair 3-3/4" for Duplexing (Short) installed

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.

.......more details

19-40240D

LiftMaster Drive Chain #40 10' Box Black Oxide

Complete kit includes: Drive Chain 10' (#40) and (2) Master Link Kits
Black Oxide coating provides corrosion resistance
Suitable for use exterior applications

821LMB-2SENSOR

LiftMaster MyQ Smart Garage Door Add-On Sensor Backwards Compatible

This add-on door sensor works with the myQ Smart Garage Hub to monitor and control a second garage door opener.
This version of the myQ door sensor is only compatible with the new myQ Smart Garage Hub by LiftMaster Model 821LMB
Replaces both 821LM-SENSOR and 821LMB-SENSOR and can be used as a replacement for either one
Also known as: 821LM-SENSOR 041D7924-1

236515

Wayne Dalton Res. Bottom Bracket Roller Holder LH

Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
Pins & Cotters Included
Top quality galvanized steel
Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
Sold as a single unit

MC00001

Micanan Gear Reducer 45:1 (1/2 3/4 & 1HP)

For PRO-GH

XAC-A

Schneider Pistol Grip Pendant Station Yellow

2 push buttons 1 emergency stop
Coil cord not included

25-42-320

Extension Spring 7' Door - 320 lbs Green w/ clip

Double - Loop
25" long 42" stretch 320 lb load
Sold individually
Rated for 10000 cycles

7-10-1

Double Slide Lock

MOD114A

Manaras Synthetic Oil Upgrade Only

This Upgrade Mod. is only available when purchaed with a compatible operator
Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances

2000Z

LiftMaster HD Roller Cage Bearing Hinge Flat Mount Both Sides Prime Coated Sold in Pairs

Heavy Duty Construction for Maximum Durability
Dependable Roller Cage Bearing Design
Even Weight Distribution
Five Times The Weight-Bearing Surface of the Nearest Large Hinge
Largest Weld Surface in the Industry
Easy to Fully Lubricate

.......more details

MM00082

Micanan Solenoid Support Bracket (MSI0085)

MF00045

Micanan H.H Slotted Self Rounding Washer Head Screw 8-32UNF x 3/8"

CDJH-34-115-CON-R

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand

3 Button station (NEMA 1)
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

3BXLT-KA

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic Keyed Alike

Double pole contacts
Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
Comes with 2 keys keyed alike
H=7" W=2-3/4" D=2-3/4"

IRB-325-HD

EMX Industries Steel Protective Hoods Only Grey Powder Coat Set of 2

Protective Hoods for the Thru-Beam Photo Eye System (Item #IRB-325) by EMX
Easily installed using the existing mounting holes of the Photo Eye
Constructed of zinc plated steel
Grey powder-coated finish
9" x 3"

41A7442

LiftMaster Electric Motor w/Travel Module Belt Drive

For 8355 model opener

15-10885

LiftMaster Dual Sprocket 48B10/41A24

Also known as: G1510855 156016 G156016 15-10885 15-6016 71156016

D800-120-125

Cable Drum High Lift 800-120 1-1/4" HL Pair

Adjustable cable attachment with screw
Made of aluminum
High Lift capacity: 120" max
Flat capacity: 266" max
Rating: 2200 lb per door max
Keyway: 1 KW of 1/4" width

.......more details

26-40019

Truck Door Bottom L-Retainer 90" Long for Todco Roll-Up Doors

Galvanized steel construction for extra strength and corrosion resistance.
Fits both standard and heavy-duty bottom seals.
Pre-punched holes for added convenience
Cross Reference: T #61191 W #4034 260000

CP-LX-KEYPAD

Lynx Wireless Commercial Op. Keyless Entry 372MHz

Illuminated Keypad
Weather shutter protects keypad from elements
Wireless Installation
4 digit codes for maximum security
Allows for access without remote or keys
For use with any UL325 commercial operator that has an LX100 or LX900 board

.......more details

Programming instructions

K107A0031

LiftMaster Replacement Keys (2) for KPW5 KPW250

Replacement keys only

41A5807

LiftMaster Chain and Cable Kit 7' Door ( 41A5807-3) - New Style

This is a one piece 7 ft. Chain and Cable Replacement Kit

MSC330V72-BULK

Motor Start Capacitor 330V 72-86MF

60-6550-A-BLK

Speed Bump Black 36" Econo Light Weight for Asphalt *** No Longer Available

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

K1D8424-1CC

LiftMaster Power Board 3 Ph SL585U/SL595U

For use with LiftMaster® SL585U & SL595U Series; and various 3 Phase Commercial Slide Gate Operator Models.

Q118

LiftMaster Access Door Keys Qty 2 K80-50295 for HCTDC CSL CSW RSW

Also Known as K80-50295

CP100C

Coupler Specialty Coated 1" Bore

Coated with 1000 plus hr salt spray rated finish
1" Bore with 1/4" keyway
Malleable iron for high strength and resistance to shock loading
Coupler halves separates and is adjustable
4-(3/8"-16 x 1" square head set screws installed
Rust inhibitor coating

.......more details

RBH105L5-RH

LiftMaster 1 HP 575 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand ** To Extent of Inventory

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

GBUP312EF-1

Gate Roller 3-1/2" x 2-3/8" Polymer Sold Individually

Polymer gate roller with bracket for 3-1/2" upright post
Works with gate pipes that are 2-3/8" thick or less

AW-10

Miller Edge Air Wave Switch Only No Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instruction manual Sell sheet

MOD130

Manaras Cogged V-Belt Upgrade

The standard v-belt is replaced by a cogged v-belt for added durability
Applies to: OSH OTH OTH-A.00 OTBH OTBH-A.00
This is available only as an upgrade with the purchase of a commercial op.

VMD202-R

EMX Remote Tuning and Adjustment Control Device

If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
The VMD202-R may then be removed or left in place as desired.

7M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M7BAR Barrier Gate

Bar assembly comes with:
(1)XBA15 -- 3M BAR
(1)XBA14 -- 4M BAR
(1)XBA9 -- EXPANSION JOINT FOR CONNECTING BARS
(2)XBA13 -- RUBBER IMPACT PROTECTION STRIP
(2) WA10 -- RED ADHESIVE REFLECTIVE STRIPS

.......more details

50430-KEY

Doorlec PBS 2-Btn O/C and Key Switch On/Off Nema 4/12

Open / Close with On / Off Key Switch Nema 4/12
Green - Open Black - Close

CAM017

Manaras Synthetic Disconnect Cam Opera

K1A6408

LiftMaster APE Kit 24V

For use with various LiftMaster® Swing Gate and Slide Gate Operators

MZ-00005

Micanan Synthetic Oil in Reducer Cold Temp. Mod.

For models PRO-GH GHC GT and GSD

HSLG-121

Linear Commercial Slide Gate Operator 1 HP 230V 1 Ph - Heater not Included

Max duty cycle: Continuous
Integral APeX Controller
Double V-belt to chain reduction
#40 roller chain
Emergency manual disconnect handle
Powder coat finish

.......more details

41D8859

LiftMaster Cover 8550WL WLED

Burgundy Replacement Cover.
This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017

MP-00072

Micanan Jackshaft with Auxiliary Trolley Assembly 14' High Door #41 Drive Chain

Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
Operator must be supplied with reversed limits
For models: PRO-J H HHD GH GHC

PRO-APTC-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

CP-SH-58-1038-HDC

Lynx Complete Limit Shaft Assembly for HDC

5/8" x 10-3/8"
Same kit used for MCJH except the HDC has 1 extra nut

ALUM-5P5

Aluminum 24" x 100' Spool Graphite # 5P5

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P5
Reverse side is #431 Bright White

Colour chart

MH00075

Micanan Shaft Collar 5/8"

PRO-X_MOD-3HP

Micanan Explosion-Proof Modification N-7/N-9 for 3HP

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

PPLK1-100

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 10 pack

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure

81600

LiftMaster 81600MC DC Chain Drive Wi-Fi Bluetooth ***Discontinued***

Safeguards garage access by sending a new code with every click.
PosiLock® electronically protects against forced openings.
Alert-2-Close signals when a door is being closed by MyQ®.
The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
Customized DC Motor is purposefully designed and built to last.
Chain Drive system for steady performance and industrial strength.

.......more details

Product guide Guide de produit 81600 Installation Manual 81600 Manuel Installation

TRACK-SET-2STD-7

2" Tracks Set 7'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

RB709U-NB

Linear GTO Garage Door Receiver Adapter Mighty Mule

The RB709 Garage Door Opener Adapter enables the Mighty Mule transmitters to open and close almost any garage door opener
Made to be used with the FM134 (two button) and the RB743 (three button) remote control transmitters or F310 Keypad
Easy to install with almost any garage door opener
One RB709 is needed for each garage door opener that will be controlled by the Mighty Mule transmitters

MV-00304

Micanan Wireless Key Switch

MV-00004

Micanan 2-btn O/C Nema-1 Pushbutton Control Station

Flush mount

RA-HOIST

GDI RA Chain Hoist/Brake 'BCR' N4/Flr Levl Dscnct N4 Field Install

Can be added in the field

ME110-2W-BLK-E

Miller Edge 2-Wire Black End Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Sell Sheet

PRO-J-7523-U-LH

Micanan 3/4HP 230V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-GT-15011-U

Micanan 1-1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

CP-HU-TC3-34-575/3

Lynx TC3 Medium-Heavy Duty Trolley Op. 3/4 HP 575V 3P Contactor Style

CMH-94

Wheel Chock CMH-94 Rubber with Integral Handle

One Piece Solid Rubber
Integral Handle
Long Lasting 80 Durometer rubber
Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high

60-7248-CBI087

Wheel Chock Safety Pkg incl'd: yellow ductile iron chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CBI-087 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Cast Ductile Iron for Impressive Strength
Painted Yellow for High Visibility
Size: 8-1/4" wide x7-1/4" long x 8-1/2" high

1004-134-16'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 16 ft***Actual Length 16'2"****

For door thickness 1-3/4"

31337

Doorlec Idler Sprocket with Oilite bushing 50B12 for a 1" Shaft

2528.093

Whiting Dual-Spring Shaft 93" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes pre-drilled
For Whiting balancer #2376

MM00284

Micanan Disconnect Arm PRO-HHD MSI0277

MF00006

Micanan Hex Head Bolt 1/4" - 20UNC 1/2" Full Thread

Used on various Micanan operators
2 required per operator

E/BLOP/150

Automatic Systems Safety Edge for BL229 14'-9" (EABLOP/150)

E/1929/031

Automatic Systems Installation Plate Ass'y BL229

Used on the BL229 gate op.

748

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#2PT) 1000/Box

Indented Hex Washer Head
7/16" Head
Max RPM = 2000
#2 point = shorter cutting edge (more thread)

DB13-T

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Tapered Sides Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
4-1/2" depth
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.

.......more details

TB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-12

Laminated Bumper Standard Black 10" x 12" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details