Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
20111

Doorlec Cam Retainer Plate Springs *** Replaced by 26117

  • Works on GH/GHX
28412

Doorlec Flange Bearing 5/8" Bore Oilite Bushing

  • Works on GH/GHX
E/1929/025

Automatic Systems Bumper and Limit Switch Ass'y (BL229)

  • Used on the BL229 gate op.
MGH-6236-1M00

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
OTBH-6533-AM05

Manaras Trolley Operator 3/4 HP 600V 3Ph Monitored Board w/N4 Eyes Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
  • Includes monitored N4X eyes (PHOTO 061)
    • .......more details
38252A.S

Genie Opto Wheel

  • The opt-wheel normally needs replaced if your garage door opener is short traveling in both directions (open and close) in the excess of 6 inches at a time then stopping.
  • Compatible with models: 1028 2028 1128 2128 1035 1055 2036 2035 2055 3035 3055 2033 3053 3155 7035 7055 7053 7135 7155
K41-0071-000

LiftMaster HD Power Board Service Kit for HDSL24UL/HDSW24UL

  • Compatible with the following models: HDSL24UL HDSL24ULMC HDSW24UL HDSW24ULMC
7-6093

RW Bottom Cane Bolt 524 x 2 Zinc Plated

  • Zinc plated
5-18-4

Tapered Angle Continuous 2" Heel x 129" L Sold in PAIRS

  • For 2" track up to 2" thick
MX001777

HySecurity Limit Switch D2VW-5L3-1HS

  • Switch type: mechanical limit switch
  • Model: D2VW-5L3-1HS
  • Activates on contact to trigger gate control logic
  • Sealed housing for environmental resistance
MX000585-0

HySecurity Smart Touch Controller Board

  • Easy Installation Configuration
  • Warning Buzzer and Alarm System
  • Ethernet Connectivity via HyNet Gateway
  • Security Monitoring and Breach Reporting
  • Allows for the configuration of over 70 different settings for a reliable and highly customized gate operator
41A8910

LiftMaster Chain Idler Pulley

42685

Doorlec SGP Operator Cabinet Only

502290

Trac-Rite Tube Astragal 502290 Sold per Foot

MT21-2M-BLACK-RH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Right Hand Outlet Sold per Foot

  • €¢Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
1404-12FT-SAND-XL

Residential Side & Top PVC Weather-Strip with cap 12' Long - X-Wide Sandstone (D)

  • Extra Wide Profile 2-1/2" wide
  • Flexible co-extruded cap to hide screws
  • Dual Fin PVC that seals against the door
  • Material: Rigid PVC / Flexible PVC Co- Extruded
  • Colors: Black Brown Bronze Cream Sandstone White
  • Lengths: 7′ 8′ 9′ 10′ 12′ 16′ 18′
    • .......more details
SEL2641R433-Z4-F

Erone 4-Relay Stand Alone Mini Receiver Fast 433MHz

SP8-ARM

LiftMaster 8 ft. Arm with Yellow Padding. Requires MA031 ordered separately

  • Padded arm for MASDCBB3
MASDCBB3

LiftMaster MEGA SPRINT High-Speed DC Barrier Gate Op ARM SOLD SEPARATELY Incl 29-NP712

  • 24VDC (1/2 HP equivalent) motor
  • The heavy-duty motor supports 10000 cycles per day with an operator speed of .9 seconds to open or close.
  • Radio receiver built-in
  • Aluminum alloy chassis
  • Built-in battery backup
  • Soft start/stop
    • .......more details
050DCRJB3MC

LiftMaster Receiver Logic Board DC. WiFi HD RJO

  • Security+ 2.0 Receiver Logic Board Replacement Kit
  • For use with the LiftMaster® 98032 Heavy Duty Residential Jackshaft DC Wi-Fi® Garage Door Operator; powered by myQ® and manufactured 2024 to present
  • The unit will feature a yellow circle learn button
SBR-N1-0L-H120

Micanan Brake Assembly for PRO-HBH LH 120V Solenoid included

  • Solenoid Included
.192-2-3/16-72-LH

Spring Wire .192 x 2-3/16" x 72" LHW Galvanized

  • .192 x 2.188" x 6'
BGARM14

LiftMaster 14' Arm only for Techna Barrier Gate

  • For use on Techna gate operator
Installation Manual Manual d'installation
CGH101L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1 HP 115/230V 1P L5 - Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except when a MOD is added
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
D4-12

Extruded Bumper Black 12" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
  • 8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
  • 98% (±2) impact recovery
  • All extruded fenders are supplied with a metal washer insert
CDJH-12-115-UL

Lynx CDJH HD Jackshaft hoist commercial operator 1/2 HP 115V with ECB UL325

  • New LX100 circuit board.
  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
    • .......more details
K10-10371

LiftMaster Straight Door Arm

  • Also known as: 105368 10-10371
  • For use with various LiftMaster® Commercial Door Operators; manufactured prior to 2005 only
CAPACITOR037R

Manaras Capacitor 340-408uf 165VAC incl. Bleeder Resistor

  • Replacement for capacitor037 on MOTOR256
K41-0095-000

LiftMaster DC Motor Drive HD Gate

  • This service kit is compatible with the following models: HDSL24UL & HDSW24UL
SUPPORT002

Manaras Board Support Rivet 0.236" Black ** Special Order Only

SUPPORT014

Manaras Board Snap Locking Support 7/16" ** Special Order Only

5-36-2

2" Vertical Track 14-GA 7'-3" (8' door) Sold per Pair

112357.0003

Overhead Logic Board for RSX 208 460 3PH

PB-001

Skylink Garage Door Wall Button

  • Install the Skylink Wall Button inside your garage.
  • Allows manual operation of your garage door opener.
  • Illuminated LED indication.
  • Easy to Install.
  • 30-foot Wire Included.
  • Mounting Hardware Included.
    • .......more details
GALV-306-6-R

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-6-INSTALLED
GALV-306-6-144-R

Torsion Spring .306 x 6" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
CP-SH-34-MC3-65

Lynx Complete Limit Shaft Assembly #65 Chain

  • For trolley operator
MD00027

Micanan Disconnect Coupling 3/4" ID PRO-J/LJ

  • Sold individually
10-LHB

BEA LZR Housing Bracket

  • €¢Housing bracket for the LZR-H100 sensor
41A3589-2

LiftMaster 10ft Belt Assembly for Models '93-2000

  • For use with LiftMaster belt drive models 1270 1280 1280R.
  • Full belt assembly
  • For use with Chamberlain belt drive models 8100 8200 and 9200.
  • For standard 10 foot high garage doors
  • T rail assemblies ONLY.
20102

Doorlec Reversing Arm Spring

10-BR2900

BEA 2 Relay Logic Module + 900MHZ Wireless Technology

  • 2 relay logic module ideal for applications requiring sequencing of electric locking devices and automatic door activation.
  • Day/Night mode allows users to designate "secure" or "unsecure" access for controlled entry points.
  • Push plates with wireless transmitters can be programmed to operate during specific time periods.
  • Programmable transmitters per receiver: 75 (unlimited for universal timer)
  • Input: DRY contact
  • Temperature rating: -22 to 158F
    • .......more details
SPR50B42X114-3/8

Sprocket 50B42 1-1/4" shaft 3/8" KW 2SS 5/16-18

  • 42 tooth sprocket for #50 chain
MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
OSH-6234-M-N1-LH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
29201

Doorlec Transformer 460V pr 120V sec 35VA

  • 460V prImary 120V secondary 35VA
SPR50B54X1

Sprocket 50B54 for a 1" Shaft

GALV-331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-319-334-R

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
CLM125-H

Linear Credential Clamshell Card HID 125kHz Proximity Support 25 pk

  • Made of sturdy ABS plastic Off White
  • Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
  • Contactless: up to 8" read range
  • Supports printable 14 mil CR80 adhesive-back PVC cards
  • Sold in lots of 25
  • Same as: 830-00420
    • .......more details
GALV-243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
GALV-262-334-R

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
GALV-262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
041D8993

LiftMaster Cover Silver 8365W 83650-267

  • Replacement LiftMaster® Cover.
  • Compatible with various LiftMaster® 8365W Series WiFi® AC Chain Drive Garage Door Openers; powered by myQ
K41-0378-000

LiftMaster 24VDC Motor Gear Box Encoder (Trolley 1200)

  • Maxum T-1200
GALV-225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Galvanized Ornage/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
E/1907/012

BLG76 Backup Spring Assembly

OTBH-6534-M-N1

Manaras Trolley Operator 1 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
CA-129-512

Continuous Angle 1-1/2" x 5-1/2" x 129" L Sold as a PAIR

CAPXSTK

LiftMaster Trim Kit for CAPXS

  • Trim plate exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Provides a clean aesthetic installation helping hide remnants of a previous installation.
WA7102

MBAR Security Key for Manual Over-Ride (1 Key)

50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

  • Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA
PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
MD-00033

Roller Chain #60 10' per Pack

K79-13493B-500

LiftMaster Logic Control Board Assembly (FDO FCC LMPLC 500V CHIP)

  • For use with various LiftMaster® Commercial Door Operator Models
OGH-6536-M-N1-RH

Manaras 2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
SPR410B12X5/8

Sprocket 410B12 x 5/8 K3/16 2S1/4-20

E/1929/094

Automatic Systems Left Bumper Ass'y (BL229)

  • Used on the BL229 gate op.
MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

  • 9' Square Arm
  • PVC
  • Red & White Retro-Reflectorized DOT Tape
  • Hardware NOT included
5-38-10

2" Horizontal Track Set 8'6" (7ft Door) 10" Radius 16ga 2-pcs

  • Left/Right hand horizontal track set 10" radius
  • Garage Door Residential usage
OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
MD-00242

Sprocket 41B14 x 3/4"

RSH-6814-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
OPH-6212-M-N1-RH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
K001A6407-1

LiftMaster Logic Board Absolute Encoder

  • Compatible with LiftMaster® Models RSW12V and RSW12VH Swing Gate Operators
19-50ML-SS

Master Link #50 Stainless Steel

MV00080

Micanan Emergency Egress Device 15ft

MP00107

Micanan Mechanical Load Sensing Mod Left hand

400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

  • 400 CBAC EG Long Arm with positive stops
  • For hydraulic Swing Gate Operator
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
70600.000

Todco 2" Nylon Sealed WondeRoller

  • Special Order Item
  • Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
  • A fully sealed bearing to keep dust and debris out
  • 2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
  • Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
  • Roller prevents build up in bearings with a sealed external washer
    • .......more details
GALV-295-6-L

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GALV-250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Galvanized Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
041-0035

LiftMaster Chain Spreader and Sprocket

  • For use with various LiftMaster® and Chamberlain® DC Chain Drive Garage Door Openers.
  • Complete kit includes: Chain Spreader Sprocket and C-Clip
  • This replacement part is compatible with the following models: 8580WLB
CGH205L5-RH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 575V 3P L5 Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
N4GH205L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 2 HP 575V 3-Phase Logic 5

  • N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
  • Comes with CPS-UN4 photo eyes
GALV-319-334-144-R

Torsion Spring .319 x 3-3/4" x 12ft RH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-312-258-144-L

Torsion Spring .312 x 2-5/8" x 12ft LH Galvanized Yellow

  • Wire size: .312
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-306-258-144-R

Torsion Spring .306 x 2-5/8" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-2-144-L

Torsion Spring .283 x 2" x 12ft LH Galvanized White

  • Wire size: .283
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-2-144-L

Torsion Spring .273 x 2" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-334-144-R

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
PUSH180

Manaras Contact Block NO XB4/XB5

PUSH185

Manaras Contact Block NC XB5

XF208VAC7

LiftMaster 208V Transformer Kit 700

12-1009

PVC Strip 6" x .060 Standard Clear Smooth for Replacement Strip Curtain Sold per Foot

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
BEA-10EABA

BEA Bracket Accessory for Eagle Artek

41184R

Genie Transformer

  • Works with Overhead Door Infinity 2000 9020 & 9120
  • Works with Genie 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
  • Same as: 41184 41184R 41184R.S