Devanco Canada - Get The Right Garage Door Opener‎ and Parts

Q400E-HCT

LiftMaster Control Board HCT

Replaced Q400D-HCT

50180

Doorlec Brake Assembly 120V

FL-T50

FL-Heddolf 1-Button Dip Switch Remote FL 311MHz *** Discontinued.

ID220-1KA Heddolf remote
9V battery & metal clip included

OMJ-6112-ECB-L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board Left Hand

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

Installation manual Sell sheet

MAREDLED17

LiftMaster Red LED Light Stip 13ft Long

Provides LED visibility on both sides to 17 ft. arm.

D6375-164-125

Cable Drum High Lift 164" 1-1/4" Bore Torque Force Pair

Maximum hi-lift: 164"
Capacity: 800 lbs per drum
Cable length: Floor to shaft center 181" minus amount of Hi-Lift
Cross reference: DNS 410-164 OMI 164HL M162-4165

RESET007

Manaras Resettable Overload Fuse 10A 1 Phase

PEDALU4272

Aluminum Pedestal Post Dual Height 42" & 72"

Pedestal post with hood
High quality aluminum
42" & 72"
Dual face-plate allows for easy wire connections

Shop drawing

2'6X6SC50

Devanco Loop 2'6" x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

UCP207-20

Precision Pillow Block Bearing 1-1/4" Bore

6-9/16" overall length
5" hole center to center distance

SNRRLIGHTJHL

LiftMaster Light Bulbs for MiniKey 10/pkg

Light bulbs for recessed keypad
Same as SN1650029

T112

Manaras Trolley Track 12ft for 3/4HP & All APT models *Actual length 174"*

For models MGT/OTH/OTBH 3/4 hp only with Chain #41

MO00002

Micanan Brake Compression Spring (5/16" ID) *** Replaced by MO00034

BK022/PR

Commercial 3" Aluminum Bottom Bracket with Cable Adjustment Sold as a Pair

Rating: 2200 lbs max per door
Use with: 3" straight track
Aluminum bracket with zinc plated hardware
Sold as a pair (includes one left and one right).

LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

Secondary Arm Only for LA400
All new arms are backwards compatible with the previous model but the LiftMaster branding is different

Installation Manual Manuel d'Installation Sell Sheet

37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
Purple

97-75003

DOT-C2 Reflective Tape 150 ft x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

LA400DC

LiftMaster Primary Actuator Arm for Single Gate Applications 12VDC New Version

New version has red stripe but will still work on the old LA400

Installation Manual Manuel d'Installation Sell Sheet

IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

1 ft L x 2" H x 3" W

RS10311

Roller 3" Steel 11" stem 10 ball

Steel Roller Wheel diameter: 3"

27-48-170

Extension Spring 8' Door - 170 lbs Orange

Single - Loop
27" long 48" stretch 170 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

41ASWG-0119

LiftMaster Release Keys for LA400 & LA500 Qty: 2

MOTOR255-WIRED

Manaras Electric Motor 3/4HP 120/240V 1PH Wired

Electric motor comes pre-wired for a brake
Must specify if operator has electronic circuit board or if it is hard-wired •This item is compatible with BRAKE011

PRO-LH-5011U-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board 372 MHz receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

7097

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Roadside (LH)

A Whiting original
Cable drum and bearing

SLT4-20

Rolling Steel 3" Crowned Slat 20-ga Galvanized

ST532COP

Copper Stop 5/32" 100 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL532COP

.343-2-5/8-RH-C

Torsion Spring .343 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .343 ID: 2-5/8" Length: 12 ft

.234-2-5/8-LH-C

Torsion Spring .234 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .234 ID: 2-5/8" Length: 12 ft

BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

Universal spring anchor brackets - Residential/Commercial
Centerline adjustment: 3-5/16" to 6-3/4"
Bright zinc plated 8 gauge steel
No bearing
Bearing R5110 sold separately

RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 50000 cycles

RBH755L5-LH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 ***NLA

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

Q311

LiftMaster Surge Protection for Master / Second *** No Longer Available

For the Miracle-One two arm gate operator - master/ slave
Same as part no. K74-50329

MB-02001

Micanan Electric Motor Only 3/4HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

36605A

Genie Pulley Assembly Belt Drive *** NLA

Genie 36605A PULLEY
For Belt Drive Models
For Chain lift Belt Lift ReliaG 600 & 800 1022 1024 1042 2022 2024 2042
Also for Overhead Door Models Legacy 800 & Standard Drive Belt

MG020-Y-2E-04

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 4ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

OTBH-6114-1-ECB

Manaras Trolley Operator 1 HP 120V 1 Ph with Electronic Circuit Board

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

Installation Manual Sell Sheet

VBELT_4L355

Doorlec VBelt 4L 35.5" *** NLA

Same as part number 19045

27220A

Genie Limit Switch Chain Drive

Compatible with the following operators: PMX700 GPS700-IC PMX1200 GPS1200-IC PMLD500 PMX500-IC/B PMX300-IC/B IC250/B PMX60-65-70-75-80-85-300IC-500IC-IC250 among others
For chain drive models with internal limits

34516R

Genie Chain Glide Inner Slide ML Series with Magnet

For ML Series with Magnet: 350ML 500ML 700ML 800ML

104100

FAAC Hydraulic Swing-Leaf Gate Operator S450H 24VDC

Hydraulic operator for residential and condominium swing gates with single-leaf max width of 3 m (SB) and 2 m (CBAC).

37408

Doorlec Reversing Contactor BF9 120VAC

MD00017

Micanan Drive Sprocket 50B23 x 1" Bore 1/4" KW

3X6SC50

Devanco Loop 3' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

7001-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

776

Fasteners Hex Head Bolt 1/4-20 x 1" 1000/Box

1/4" bolt has 7/16" head
Max torque = 6
Full thread
Grade 5

AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
Battery is included # CR2032

Installation Manual Sell Sheet

K001D8072-1

LiftMaster Single Phase Relay/Power Board (K001D8396-1)

For Logic 5 commercial operators
Same as K001D8396-1
014D1276E

26-14623

Truck Door Top Panel (13" x 98") for Todco DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
.75" thick 7 ply exterior grade medium density plywood
Primer finish

AIRSWITCH008

Manaras Metal Case for AIRSWITCH007

CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
Polarized photo-eye design for a safe retro-reflective photo-eye system
Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
Range up to 30 ft - indoor use only
24VAC operation
Color: Yellow

.......more details

Installation Manual

MV-00023

Micanan 1-Door O/C/S Transmitter CT-1 313 MHz

Programming Instructions

27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

Wire thickness: .182
Spring length: 33 inches long (assembled length)
Inside diameter: 1.188
Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.

21-10298

Transformer 100VA

Multitap Transformer 120/208/277/575V Primary 24V Secondary 100VA 50/60 Hz
Fused at 5A

MK00736

Micanan Smart 10.0 Full Feature Circuit Board Non-Monitored ** use MK00641-NM

For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
Board has 5 relays

Instructions Manual

STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

1-button 1 N/O contact
Plastic

SPREADER002

Chain Tensioner for 1" / 1-1/4"

Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

MH00099

Micanan Bearing

Fits PRO-APT and PRO-HHD
Requires 2 per shaft
3/4" Bore

BEARING005

Manaras Flange Bearing ID 5/8"

Flange bearing for 5/8" shaft

.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.250-134-L

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

108135.0004

Overhead Serpentine V- Belt for JST 31"

Overhead Door commercial garage door opener serpentine belt 108135-0004
Type "J" 31"

45DCT

LiftMaster Circuit Board

Board: Tri-band Security+ 2.0
DC Chain/ Belt Drive model
Fits: 8360 8550
Also known as; 45DCBR1A 041D7356 1D7356 41DCBC1A 41DCBC3A 41DCCC2A 41DCBC5A 45DCCL5A 45DCCL3A 45DCCL1A 45DCCR5A 41D7356 45DCCR3A 45DCCR1A 001D7356 41DCCC1A 41DCCC3A 45DCJL5A 45DCRL1A 41DCCC5A 45DCRL3A 45DCJL1A 45DCJL3A 45DCBL5A 45DCBL3A 45DCBL1A 45DCBR5A 45DCRL 45DCBR3A 47DCCR1 1D8363 045DCT 45DCBL1 45DCBL2 45DCBL3 45DCBL4 45DCBL5 45DCCL1 45DCCL2 45DCCL3 45DCCL4 45DCCL5 45DCBR1 45DCBR2 45DCBR3 45DCBR4 45DCBR5 45DCCR1 45DCCR2 45DCCR3 45DCCR4 45DCCR5

20-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Red

2 strand 22 gauge tin-dipped copper hook-up wire
Color coded White & White/Red wires

ME112-R

Miller Edge Black 2W Non Monitored RH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

977LMC*

LiftMaster Wireless Keyless Entry 390 MHz - DISCONTINUED

Wireless Keyless Entry with 390 MHz rolling code
Compatible with all 390 MHz Chamberlain (LiftMaster) residential and commercial door openers and gate operators
Mounts easily to the door jamb with two screws
Compatible with Security+ Systems with amber learn LED
Compatible with models built from 1997-2005
Includes 9V battery

.......more details

41B5424

LiftMaster Belt Idler Pulley and Bracket (Built Years 2000+)

This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers that utilize a T-rail
Fits models: 2500 2580 3280 3850 3500

41B0139

LiftMaster MVIS Motor Isolators 4/box

41A5483C

LiftMaster Circuit Board Assembly *** To extent of Inventory

Assembly includes: Circuit board end panel and light socket
For chain drive units with two lights
Fits 2265 2565 7420 PD610 PV612C & PD612K
Last letter of the part # indicates revision date
Also known as 41A5483 41A5483B

CAM005

Manaras Limit Cam 5/8-18 UNF

Limit cam for Mountshaft009
2 cam's required per shaft

.262_2-5/8"-RH

Torsion Spring .262 x 2-5/8" x 12ft RH Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft

PL-BO7-CRGSLIDE

Lynx Carriage Assembly (Nylon) ** No Longer Available

Proline / Lynx 455 Plus trolley slide assembly
For operators built from 2000 +

7145.96

Whiting Bottom Seal For Coldsaver 96" long

Aluminum retainer sold separately

308913

Linear 1-Channel Multi-Code Visor Transmitter 310 MHz

Open/Close remote for 1 door
Compatible with 310 MHz Stanley and Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches - 10 dip switches
Power: 9-volt battery
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

Three channels - three relay outputs
Textured aluminum case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

HAE00033

Linear 8ft Belt & Inner Slide Assembly (HBT8)

HAE00049

Linear Drive Sprocket Holder and Belt Clamp

600BH

6" Heavy Brush Insert 8ft Long

Polypropylene bristles

4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

1003-1-5/8-14'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1104-8FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

RCB-2560

Roller Chain Break #25 thru #60

Replacement tip included.

26-94322

Truck Door Bottom Panel with Seal (12" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

25-60052

Truck Door Latch Plate for Whiting Roll-Up Doors

Steel construction Plain finish
Contoured for proper lock engagement
Cross Reference: W #2804

Z9997

Hand Chain 25' for Manual Chain Hoists

Not SAE rated.
Designed for approx. 35 lbs

Z9401

Coupler 1" Bore Non-Ajustable

Non-Adjustable Shaft Coupler Steel Zinc plated
1" Bore
L= 4.7" 3 screws and nuts
Tightening torque on shaft: 20lb-ft max

CB332A0500

Cable 3/32" 7x7 500' Galvanized

Galvanized cable 3/32" 7x7 500ft spool.
Cable break strength: 920 lbs.

Comparison charts

R5200

Pulley 3" HD Yellow Zinc Plated Steel 200lb Max

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/8"
Riveted with Ball Bearing

S-HOOK_SMALL

S Hook #8 Small 1/8" x 1-3/8"

25-01439

Truck Door 1/8" Stainless 5/16" Eye 115" for Roll-Up Doors Sold per Pair

Works with both Whiting and Todco doors
Aluminum eye ends are used on 5/16" eye cables
Cable size: 1/8"

DL-4000-8

Dock Leveler Retainer Galv. Steel Weldable 8' Long

Weldable to sides of dock leveler
Use with 4007 aluminum retainer & light brush (not included).
Vinyl insert slides into this outer retainer.

27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 98" Spring Length: 60" Wire Size: .243
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire
Heavy-duty cast aluminum cable drums hold up to 130" of cable

.......more details