Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

RSH-6114-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 120V With Elect. Board N4X Thru Beam Eyes Right Hand

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
  • .......more details
TUBE_SHAFT_12FT

Hollow Shaft 1" x 12'-10" Galvanized 16 gauge

  • When ordering order one foot longer that actual door width
NUT022

Manaras Lock Nut Zinc Plated 3/8-16 Hex Nylon

  • Used on old MJH
WASHER008

Manaras Type A Plain Washer 5/16" Zinc Plated

  • Used on old MJH
CS303-DB50

EMX Car Sense Direct Burial Sensor with 50 ft Lead Wire ** Replaced by the LRS-DB-50

  • Can be used for above ground applications ie.. strapped to a post or wall
  • Easy low cost installation
  • Small size of the detector allow for easy installation in pavement
  • Rugged sensor is also suitable for above grade installations
  • Includes direct burial sensor and 50 ft of lead wire
  • Advanced 3-axis technology for better detection
  • .......more details
XT2564-CUT

Xcluder Rodent Block 4" Black Sold per Foot

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
71-MLSBC

LiftMaster Single Button Control Mod. Field Kit Mod. Logic

  • Field service mod. for adding single button feature to medium duty logic operators
MB-02002

Micanan Electric Motor Only 3/4HP 110/220V 1PH TEFC

  • Base mount motor fits: TW TBW JW HW HHDW SDW
15-50B24QGH

Sprocket 24 Teeth 1-1/4" Bore 1/4" Keyway

HBS2U

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Single End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets (2) Clevis Pins (2) Cotter Pins*

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For 1-5/8"-2" Doors
  • Fits 2" or 3" Track
  • Single End Stile
  • Pins and Cotters
  • .......more details
ME123-M-YEL-LH

Miller Edge Yellow LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
  • .......more details
ME123-M-BLK-RH

Miller Edge Black RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
  • .......more details
2B735

LiftMaster Main Board EL25 (041B0735)

  • Same as 041B0735
9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

2B747

LiftMaster Direct Connect Cable (41B0747)

  • EL25 conecting cable
MCT-1

Linear 1-btn MegaCode Visor Transmitter 318 MHz

  • Activates one 318MHz MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery incl.
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 2.16" W x 3.75" H x .95" D
  • .......more details
PULLEY007

Manaras Clutch Pulley 8" x 1" bore

17-10363

LiftMaster Pulley 1-5/8" OD 1/2"B 4L Belt

K72-34818

LiftMaster Limit Shaft Kit SL575/585/595

  • Complete with: Limit Shaft Limit Nuts Limit Bearings Limit Sprocket Shim Washers Compression Ring Roll Pin and E-Ring.
OSH-6112-CONT-L

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
9291644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones LHW

9301644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones RHW

MD00044

Micanan Spur Gear 12B60

OSH-6233-ECB-LH

Manaras Opera-SH 3/4 HP 208V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
  • .......more details
OSH-6213-ECB-LH

Manaras Opera-SH 3/4 HP 240V 1Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
  • .......more details
K20-5150LD

LiftMaster Electric Motor 1/2HP 120V MT/MH Motor

CABLE_1/4SS-500

Cable 1/4" 7x19 500' Stainless Steel

8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

  • An original Whiting assembly
ME111-E

Miller Edge Black End Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
  • .......more details
RA-AD-T3

Lynx 3-btn Transmitter AD455 372 MHz

  • UL325
  • Works on the new Lynx operators
  • For 3 doors
25-60502

Truck Door T-Style Ramp Handles Roadside (Left)

  • Black plastic construction
  • Cross ref.: 39504-1
DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

  • Standard features include: 2-cable balancer with independent springs
  • Balancer springs treated with rust preventative
  • All door hardware is E-coated
  • Spring loaded lock catch
  • Heavy-duty 2" 13-gauge track
  • Stainless steel aircraft cables
  • .......more details
CP-LX100

Lynx Control Board with Cover for UL325 models

  • For all voltages
11-10705

LiftMaster Output Shaft MH

OSH-6233-CONT-R

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
  • .......more details
1003-4"-PER-FT

Bottom U-Rubber 4" Black Sold per Foot

R5996

Shaft Collar 1" Split

K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

  • Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
  • Compatible with DJ J operators
K20-1050B-2P

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

  • Replacement motor for BG770 BG790
  • Same as 20-1050B-2
PEDALU4272

Aluminum Pedestal Post Dual Height 42" & 72"

  • Pedestal post with hood
  • High quality aluminum
  • 42" & 72"
  • Dual face-plate allows for easy wire connections
1007-1-5/8-12

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
7001-WG-16-CO

Residential Wood Grain Side & Top W/S Cherry Oak 16' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
  • .......more details
71-B1PH

LiftMaster Internal Brake Kit w/Solenoid 120/240V 1PH for L5 Operators

  • Works with Logic 5 commercial operators and SL585/SL595 U and UL gate operators
CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

  • Galvanized cable 1/8" 7x7 500ft spool.
  • A higher quality cable than the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
MD-00003

Sprocket 41B36 x 1" Bore 1/4" Keyway

  • 2 set screw 5/16
24-MAG-STRAP

Magnetic Hinge Strap 24" Black Set of 4

  • Decorative hinge strap only.
  • Black flexible magnetic material with deep embossed design
K-T5011L4

LiftMaster Electrical Box Replacement Kit L4 K-T74-33015-1 ** Price by Quote Only

  • For models APT T SD 115V 1Ph L4
HDC-411-RH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Right Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
  • .......more details
84284

Marantec Logic Board for Non-EOS Models

  • For use on M Line- M-4500 and M-4700 models.
  • For use on Q Line - 7500 and 7700 models.
  • For use on Martin DC 3500E and DC 3700E models.
  • Replaces 8054216. Special programming needed. Instructions included
MAW123-BLK-U

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
4-11-7R

Roller 3" 10-Ball 7" Stem Nylon

  • Sealed bearing for long life in dusty conditions
  • 7" stem (working length = 6 1/8")
DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

  • Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
  • Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.
  • .......more details
HSCFV112

Hinge Full Vision Hinge Clopay Style "B" 12-ga Stainless Steel

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Use on Clopay Brand Full Vision Products
MH00009

Micanan Flange Bearing 1" ID x 2" OD

  • 2 required per operator
37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

  • Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
  • Purple
2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
GH4416-06-R

Green Hinge #6 12-ga Right Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-04-L

Green Hinge #4 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
K23-19380

LiftMaster Reset Switch for LA400

RS10311

Roller 3" Steel 11" stem 10 ball

  • Steel Roller Wheel diameter: 3"
3007-0

Elton Telescopic Door Handle / Foot Plate Black

  • For door thickness: 1-3/8" - 2"
  • Black polyethlene
  • Cut-out size: 6-3/8" x 3-5/8"
12-19504

LiftMaster Flanged Bearing 1" Keyed

156871

Decorative Hinge Yorktown Style 16" Stamped Steel sold per piece

  • 16" hinge strap only
  • Black stamped steel
  • Mounting hardware sold separately
  • Sold per piece
LC-36A

LiftMaster Light Curtain **discontinued

  • Must be used with a primary entrapment device and be installed along the vertical plane of the door.
  • Color-coded transmitter and receiver for easy identification.
  • Provides 36 in. of effective height coverage to increase the area of protection.
  • Multiple sets of LC-36A curtains can be mounted on a door providing coverage flexibility.
  • Maximum door width of 33 ft. ensures coverage for most commercial doors.
  • Eight (8) LEDs per side and 22 cross-beams produce an invisible curtain of infrared light for maximum detection capability.
  • .......more details
27-48-220

Extension Spring 8' Door - 220 lbs Green with clip

  • Single - Loop
  • 27" long 48" stretch 220 lb load
  • Sold individually
  • Rated for 10000 cycles
27-48-110

Extension Spring 8' Door - 110 lbs White

  • Single - Loop
  • 27" long 48" stretch 110 lb load
  • Sold individually
  • Rated for 10000 cycles
K77-36541

LiftMaster Antenna

  • For various gate operators
K94-36411

LiftMaster Piezo Alarm

  • For LA400DC
EP2986

Exhaust Port 5" non latching long barrel

  • 5" inside diameter 2" sleeve - non latching.
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
MOTOR258-WIRED

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH Wired

  • Electric motor comes pre-wired for a brake
  • Must specify if operator is equipped with electronic circuit board or if it is hard-wired
MP00015

Micanan Up-Charge Track and #410 (#48) chain for 16' h Door *Actual length 222"*

  • For 1/3 HP and 1/2 HP operators only
MP00016

Micanan Up-Charge Track and #41 chain for 16' h Door *Actual length 222"*

  • For 3/4 HP and 1 HP operators only
H753L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Left Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • .......more details
H753L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • .......more details
HTRKITRSL

LiftMaster Self-Regulating Heater and Coil for RSL12V ** DISCONTINUED

  • Protects system to -40F.
  • Installs into the operator frame
14FW

Rolling Steel 3" Filler Endlock for Continuous

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
17J

Rolling Steel 2" Flat Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
7550

Whiting Winding Cone for 2-5/8" ID Spring Wire Roadside (LH)

  • A Whiting original
SLT14-20

Rolling Steel 3" Flat Slat 20-ga Galvanized

SLT2-22P

Rolling Steel 2" Crowned Slat 22-ga Primed

SLT2-22

Rolling Steel 2" Crowned Slat 22-ga Galvanized

342.115

Whiting Intermediate Panel Tongue & Groove 11-1/2" x 96" Price on Request

  • Standard size panel primer only
6X10PO50-RIGID

Devanco Loop 6' x 10' Rigid PVC pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
GH203-L5

LiftMaster Gearhead with Brake 2 HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
  • .......more details
GH755-L5

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
  • .......more details
.331-5-1/4-RH-C

Torsion Spring .331 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 5-1/4" Length: 12 ft
.306-6-RH-C

Torsion Spring .306 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 6" Length: 12 ft
.295-2-LH-C

Torsion Spring .295 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 2" Length: 12 ft
.273-3-3/4-RH-C

Torsion Spring .273 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 3-3/4" Length: 12 ft
.262-2-5/8-LH-C

Torsion Spring .262 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 2-5/8" Length: 12 ft
.234-2-LH-C

Torsion Spring .234 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 2" Length: 12 ft
.225-2-5/8-RH-C

Torsion Spring .225 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 2-5/8" Length: 12 ft
BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

  • Universal spring anchor brackets - Residential/Commercial
  • Centerline adjustment: 3-5/16" to 6-3/4"
  • Bright zinc plated 8 gauge steel
  • No bearing
  • Bearing R5110 sold separately
BOARD066R

Manaras Replacement Power Board ***No Longer Available

  • Used on all Manaras circuit board type operators
OSH-6533-CONT-R

Manaras Opera-SH 3/4 HP 600V 3 Ph with Mechanical Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
MK00650

Micanan UPCHARGE for N-4 Photocells in Lieu of Nema-1 Reduction for N1 Included. **Obsolete Repl by MK00697

  • In lieu on the standard Nema-1 photocells supplied with the operator
K33-51206-315

LiftMaster Radio Receiver Board Elite **DISCONTINUED

  • Fits the Miracle-One gate operator
.331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED