Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
DM54LC-COATED

Cable Drum High Lift 54" 400-54HL Specialty Coated Pair

  • Use for Commercial Highlift Doors
  • Maximum Door Height 120" + Highlift
  • Maximum Highlift 54"
  • Lifting Weight Per Drum 275 lbs.
  • Resists Chemical/Moisture Corrosion
  • Abrasion Resistant
    • .......more details
S142ARNN115

Carlo Gavazzi Amplifier 115V

  • Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
  • 11-pin circular plug for easy connection.
  • 8A SPDT relay output NPN/ PNP transistor output or alarm output.
  • Diagnostics for sensor test during operation.
  • Alignment help via LED or alternation of alarm output.
  • Level indication for dirt accumulation.
    • .......more details
503267

PEEK Vehicle Loop Detector 24V with Harness Nema 1 ** Discontinued

  • Enclosed requires separate 24VAC power.
  • Wiring harness with plug for detector included.
  • OPEN only (all LiftMaster operators) or SAFETY/HOLD OPEN only (operators with type B2 T TS or T1 control wiring) when vehicle passes over loop wire
  • Requires a loop of wire embedded in the ground to connect to the detector.
  • Requires 2-wire output connection to door operator and 24VAC power
  • Also known as: G50625S24
    • .......more details
838

Skylink Transmitter / Receiver Set Rolling Code ***NLA

  • Generates new code each time you push the button these codes never to be repeated.
  • 99.99% works with most brands of garage door openers.
  • Ideal replacement for older or obsolete models.
  • Electronic scanners "code grabber" cannot duplicate the operating code.
  • Easy to install & program.
  • Works as a secondary receiver (both original existing receiver and 838 receiver will work simultaneously).
    • .......more details
Q089

LiftMaster Trolley Body Assembly Kit K75-50147

  • For Liftmaster trolley operator HCT
  • Kit includes: trolley body cover trolley wheel shaft installation screws ring clip plastic plugs and lock with keys set
37313

Doorlec Relay Flat Pins 2 Pole 24V

60-7238

Wheel Chock Tie Back Chain 15 ft Long 3/16" Galvanized w/ Quick Links

  • One tie back chain only
PPLV1-10

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 10/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Sold in a 10 pack
    • .......more details
Programming instructionsInstructions de programmationSell sheetBrochure
750

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#3PT) 1000/Box ** Indef. delivery

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #3 point = long cutting edge (less thread)
MM-00057

Micanan Wall Mounting Bracket (GH reducer 50/70)

1003-3-DF-200FT

Bottom U-Rubber 3" Dual Fin Black 200' Long

  • 200ft spool of vinyl insert.
  • Dual fin
S142BRNN924

Carlo Gavazzi Amplifier 24V

  • Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
  • 11-pin circular plug for easy connection.
  • 8A SPDT relay output NPN/ PNP transistor output or alarm output.
  • Diagnostics for sensor test during operation.
  • Alignment help via LED or alternation of alarm output.
  • Level indication for dirt accumulation.
    • .......more details
IRB-MON

EMX Industries Nema 4 Through-Beam Photocells with Gold Hoods New UL325-2018 *** No Longer Available

  • Type B1 non-contact sensor
  • UL325-2018 compliant
  • Lens-less design
  • Simple 2-wire connection
  • Relay contacts available
  • NEMA 4X enclosure
    • .......more details
Installation ManualSell Sheet
K72-33192

LiftMaster Limit Shaft Kit NEMA 4 & 4X for H J HJ GH GT T & APT Operators

  • For: NEMA 4 & 4X for H J HJ GH GT T & APT Operators
  • Shaft measures 12" in length
  • Compatible with Logic 4 and Logic 5 operators
104255

Allstar Clip only for 8833TC

  • Clip only
RA-AD-T3

Lynx 3-btn Transmitter AD455 372 MHz

  • UL325
  • Works on the new Lynx operators
  • For 3 doors
Programming InstructionsCompatibility chart
1005-1-1/2-10'

Aluminum Bottom Retainer U-Shaped 10' Long

  • For door thickness 1-1/2"
MALEDCW

LiftMaster Counterweight for 17ft LED Arm

  • For use with MALED17 17 ft. LED Arm for MA/MAT
OTH-6112-ECB

Manaras Trolley Operator 1/2HP 120V 1Ph with Electronic Circuit Board

  • The OTH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
CP-LX225

Lynx Enhanced Relay Board

RDGRNCARD

LiftMaster Warning Device Option Board with Red/Green Light Box

  • The Red/Green warning light card flashes a warning light for 10 seconds prior to the Timer to Close activating the door to close.
  • Advanced warning of the door closing helps prevent traffic collisions with the door
  • Controls both 24V & 110V traffic lights
Installation Manual
SPF514-6

Spring Filler 12 ft Long No Fins

  • For use with 5-1/4" or 6" torsion springs
  • Accomodates both 1" and 1-1/4" shaft size
N7/9-MOD

Micanan Explosion Proof Modification

  • Modification available on certains models only
MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
6X20SC50

Devanco Loop 6' x 20' Saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
MD-00003

Sprocket 41B36 x 1" Bore 1/4" Keyway

  • 2 set screw 5/16
S2TR2641E1

Erone 1-Channel Mini Transmitter 433MHz

  • Open/Close remote for 1 door
  • Palm-size transmitters 83 x 48 x 16m (3.25 x 1.9 x 0.6in)
  • Learn button programming
  • Ergonomic stylish design Rugged & durable
  • Light grey base with yellow buttons
  • unobstructed range: 820 ft (250m)
    • .......more details
Sell SheetBrochureWireless System Chart
MA117

LiftMaster Counterweight for Arms 15ft & Up

ME123-CA3

Miller Edge L-Shaped Aluminum Mounting Channel Sold by the Foot

737

Fasteners Round Head Carriage Bolt 3/8-16 x 3/4" 1000/Box

  • Gr. 5 Zinc
K001A6039

LiftMaster Control Board for LA400

  • Replaces P/N 127A0071C PN 127A0071F
Installation Manual
H12G04-SS

Hinge #4 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
17K

Rolling Steel 2" Flat Continuous Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
SLT14-20

Rolling Steel 3" Flat Slat 20-ga Galvanized

GH203-L5

LiftMaster Gearhead with Brake 2 HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
PL-B11-ARM-STR

Lynx Straight Arm for Proline Operator

  • Used on Proline residential garage door openers
.283-3-3/4-RH-C

Torsion Spring .283 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 3-3/4" Length: 12 ft
.225-2-LH-C

Torsion Spring .225 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 2" Length: 12 ft
OSH-6533-CONT-R

Manaras Opera-SH 3/4 HP 600V 3 Ph with Mechanical Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
201-300-401-01

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz New Generation

  • Open/Close/Stop remote for 8 doors
  • Range of approx. 1000ft
  • A heavy-duty remote for Industrial applications
  • Year 2016 +
Programming InstructionsInstructions de programmation
LEVER056

Manaras Disconnect Lever

  • Works on newer model MJH
24701R

Genie Chain Drive Dog Limits 3-PKG

  • Replacement limits for older model Genie Chain Drive openers with steel T-Rail assembly
  • Replaces the clip-on limit switch
  • Limit dogs external rail-mounted limit switches
773

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2-1/2" 1000/Box *** Temp. NLA

  • 7/16" Head
  • Hex washer high profile head
780

Fasteners Hex Head Bolt 3/8-16 x 1-1/2" 500/Box

  • 3/8" bolt has 9/16" head
  • Max torque = 22
  • Full thread
  • Grade 5
APOW3

LiftMaster Transformer 120V input 34VDC output

  • Plug-in AC/DC converter
  • Used as a replacement transformer for all LA400 models
LEVER065

Manaras Brake Lever

831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming Instructions
CBS-338

Center Bearing Support 3-3/8" 8-gauge with Bearing Sold per Piece

  • Heavier gauge allows for use in both 2" commercial or 3" industrial applications
  • Sold per piece
  • For 1" shaft
  • Double clipped ends
H501L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Left Hand *** No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
K72-14130-1

LiftMaster Limit Shaft Kit H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators

  • For models H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators
  • Kit includes: Limit shaft Limit nuts Limit bearings Limit sprocket Interrupter cup Shim washers Compression ring Roll pin and E-rings.
165-B

Fusible Link For Loads 1 to 10 lbs

  • Length is 1.4328" width is .563"
  • Distance between center is .938"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
71-65WTC

LiftMaster Weatherproof Case

  • Optional weatherproof case suited for 412LMC 422LMC and 423LMC
  • Measurements of the interior: W=5.75" L=7" D=3"
  • Measurements of the exterior: W=7" L=10" H=3.5"
ARK

LiftMaster Auto Reconnect Trolley Kit

Installation Manual
28-30015

Truck Door 1" Vertical Track with Holes 93.5" for Todco Roll-Up Doors

  • Galvanized steel 14 gauge construction
  • Holes drilled to allow for faster plug weld installation to frame
  • For use with 1" rollers
MB-02202

Micanan Electric Motor Only 3/4HP 575V 3PH

  • Base mount motor fits: T TB APT J EJ H EHJ HHD SD GO MSW
5X10PO50

Devanco Loop 5' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
MX00149

Micanan Complete Clutch Shaft Assembly for PRO-H

MJ7104

Doorlec Utility Switch 21800

  • Utility switch with a 'NO' and a 'NC' contact
  • Adjustable arm with roller
15-50B24LGH

Sprocket 24 Teeth 1" Bore 1/4" Keyway 2-SS

029C98090

T-Style Complete Replacement Door White Stainless Steel Pkg 029C98090

  • Manufactured to exact size fully assembled tracking and spring assembly included.
  • Price varies according to size
.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors and gates.
  • Retrofits easily to 1" to 1-1/4" sectional doors
  • Touch sensitive signaling allows for immediate stopping/reversing of motion
  • For sectional doors: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order
  • Lead wire: 22 gauge univversal
    • .......more details
Installation ManualWorksheetSell Sheet
811LM

LiftMaster 1-btn Dip-Style Transmitter Sec+ 2.0 ***No Longer Available

  • Extreme range 1-btn encrypted DIP style remote control.
  • Easy to code 12 position dip switch offers up to 4 096 codes.
  • NOT compatible with the new Liftmaster 8550 and 8360 garage door openers.
  • Compatible with the 850LM Universal Receiver.
Programming InstructionsInstructions de programmationSell Sheet
71-B575

LiftMaster Interior Mount Brake Assembly 575V

Instruction Manual
41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

  • Gear and sprocket assembly for belt drive units after 2002.
  • Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.
Installation ManualManuel d'Installation
19-50HL

Half (Offset) Link #50

  • Half link for #50 chain
  • ANSI Standard Carbon Steel
1920

Whiting Top Closure Mounting Plate for Insulated Doors

41A2816

Jobber Drive Gear for Chamberlain Sears LiftMaster residential operators

  • Drive gear for Chamberlain / LiftMaster / Sears residential garage door openers built 1984 +
  • This is an excellent quality aftermarket product
217436

Linear Drive Sprocket - Chain (HCT)

300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1006-1-1/2-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
24-HWB-PAIR

Winding Bars Hex 24" Set of 2

  • Cold rolled hardened steel.
  • Hex shape keeps the bar from rolling away.
  • Machined to 1/2" at one end with a 5/8" outside dia. on the other end
  • Sold as a pair.
7001-9-WHITE

Commercial Side & Top Weather-Strip 9' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-3
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
28-32072

Truck Door 2" Horizontal Track with 8" Radius 107" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 107" Fits door sizes: Up to 96" high
  • Cross Reference: W #11-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
26-40200

Truck Door Head Seal Only 96" Long for Roll-Up Doors

  • Seal molded from long lasting rubber
  • Cross Reference: T #69718 630300
HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

  • Measures 7" from end to end
  • Measures 5.5" from eyelet to eyelet
SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
H11G06

Hinge #6 x 11 gauge

  • 11 gauge #6 hinge - 0.79 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
CB5320500

Cable 5/32" 7x19 500' Galvanized

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
Comparison charts
4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
T755L5

LiftMaster 3/4 HP 575V 3p Commercial Trolley Operator Logic 5 ***No Longer Available

  • Low profile trolley operator with brake included
Installation ManualManuel d'InstallationSell sheetBrochure
GALEOW

Erone 26-bit Wiegand Backlit Keypad

  • Compatible with ATRIUM CENTAUR and any 26-bit Wiegand system
  • Heavy-duty Zamak® cast alloy
  • Indoor/outdoor application
  • Blue backlit keypad
  • Weather resistant and vandal proof
  • PIN code: 4 to 8 digits
    • .......more details
Wireless System Chart
LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
25-01575

Truck Door Beverage Body Roll-Up Door Cable

  • Includes one (1) pair of cables
  • Zinc plated tear drop
  • Length: 110 inches
  • Cable eye: 1/4
  • Cable construction: 7 x 7 galvanized
ETB-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener TEFC Motor

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
  • DC2000 Logic Controller
  • Comes with standard O/C/S push button station
M4A

Safety Inertia Brake 1-1/4" Bore 3576 Torque PCM4AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
  • Fits 1-1/4" shaft
  • Normal Torque: 3576 lbf.in
  • Locking Torque: 17516 lbf.in
  • Made in Italy
    • .......more details
Reference manualTechnical dataSell Sheet
TC2

Tri-Code Transmitter 2-btn Visor - DISCONTINUED

  • Tri-Code series 2 channel transmitter model TC-2
  • 300 & 310 MHz simultaneously
  • Each channel can be set on a seperate code format
  • Works with both 8 and 10 dip switch systems
  • Replacement: 380UT
ST-CLEAR-TUBE

Soft Touch Clear Tubing Sold per Foot

SPECPARTEL001

Manaras 3-btn Push-Button Control Station with Pilot Light Nema 4/12

  • 2 N/O contacts and 1 N/C contact for stop.
  • Surface mount.
778

Fasteners Hex Head Bolt Gr 5 5/16-18 x 1"1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 5
H753L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Left Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
PLATE084

Manaras Plated Brake Plate for OSH

  • Plate only
.312-2-5/8-LH-C

Torsion Spring .312 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 2-5/8" Length: 12 ft
86-925

Gel Connectors Red 19-26 AWG 100/Pkg

  • Internal moisture-resistant sealant protects wires from corrosion (indoor/outdoor use)
  • Quick one-step splicing – insert unstripped conductors and crimp
  • Use with solid copper single-conductor wire 19-26 AWG
  • Maximum insulated O.D. of .066 in. (1.68 mm)
  • Permanent connection- once crimped they cannot be reused
  • Use 12 or 3 ports as needed
    • .......more details
L955W

LiftMaster Multi-Function Control Panel Secuirty+ 3.0

  • Includes a large push bar for garage door opener operation and a light control button.
  • Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.
  • Compatible only with LiftMaster Security+ 3.0™ garage door openers.
  • Warranty: 1 Year
Installation ManualManuel d'InstallationCompatibility Chart 2025Comparison Chart 2025
RB-G-K10C

Miller Edge RBand Monitored Wireless Gate Edge System

  • RBand Gate Edge Transmitter/Receiver System
  • The system is intended to provide a wireless connection between a monitored sensing edge and a motorized operator that controls the associated gate
  • The RBand Receiver is compatible with up to 3 RBand Transmitters on 2 channels; 6 total transmitters.
  • RBand meets the 2016 UL 325 requirements for monitored devices and has been certified as a UL 325 Recognized Component.
  • It is designed for use with operators that comply with 2016 UL 325 using a Miller Edge 10K Sensing Edge.
LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
38000063

Tork Winch Electric Motor 1HP 115V 1Ph

  • Replacement electric motor for TW 1200