Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
17311

Doorlec AT1035D 1-btn Mini Transmitter 313 MHz ** To extent of inventory

  • One block of 10 dip-switches for programming
  • Compatible with Doorlec 17307 receiver (DC-3000R)
  • Includes 12V battery (GP23A)
VBELT_4L340

Manaras VBelt 4L 34" - repl. by A32

  • Used on MTH/MTBH APE APT models
  • Same as Doorlec 19030
LIMIT024

Manaras Double Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT003
  • 2x SPDT - Unimax
  • Same as Doorlec # 21702
Limit Switch Chart
DOORARM001

Manaras Door Lifting Arm Assembly

  • Complete door arm assembly for all Manaras trolley operators.
SPREADER001

Chain Tensioner for 1" shafts

  • Chain spreader for installation with 1" operator shaft & 1" door shaft.
  • Includes 2 shaft collars and set screws.
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 4 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
Programming Instructions - ECBProgramming Instructions - CONT
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
Programming Instructions
7145.96

Whiting Bottom Seal For Coldsaver 96" long

  • Aluminum retainer sold separately
109410

Linear 2-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 per channel (set by dip switches)
    • .......more details
Programming Instructions
308913

Linear 1-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 19683 (set by nine trinary dip switches)
  • RF frequency: 318 MHz
  • Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787
    • .......more details
Programming Instructions
831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

  • Three channels - three relay outputs
  • Oil-tight JIC ABS case
  • Terminal strip for wiring
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
    • .......more details
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

  • Activates one device
  • Wire lead antenna
  • Mounting bracket supplied
  • Memory: storage for up to 10 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
HAE00033

Linear 8ft Belt & Inner Slide Assembly (HBT8)

HAE00004

Linear Limit Switch Assembly

  • For LSO LDO LCO
4010-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree

  • For angle application (180 degree)
  • For use with Light Brush or Vinyl Insert
1003-4"-YELLOW

Bottom U-Rubber 4" Yellow 200' Long

  • 4" yellow vinyl insert 200ft spool.
1003-3"-200FT

Bottom U-Rubber 3" Black 200' Long

  • 200ft spool of vinyl insert.
1006-2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1003-2-16'

Aluminum Bottom Retainer L-Shaped 16' Long

  • For 2" thick doors.
1003-2-24'

Aluminum Bottom Retainer L-Shaped 24' Long

  • For 2" thick doors.
1003-1-5/8-16'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1003-1-3/8-8'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .2187 - .3065
1104-16FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 16' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
32-48-170

Extension Spring 8' Door - 170 lbs Orange ** Replaced by 27-48-170

  • Double - Loop
  • 32" long 48" stretch 170 lb load
  • Springs sold individually
  • Rated for 10000 cycles
Spec Sheet
26-94323

Truck Door Bottom Panel with Seal (13" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

  • Measures 7" from end to end
  • Measures 5.5" from eyelet to eyelet
DM32

Cable Drum Standard Lift 32' 800-32 Pair

  • 32' Standard Lift aluminum die cast alloy for a 1" solid shaft. Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH
  • Max. Door Height: 32'-1".
  • Rated Lift per Drum: 1000 lbs
  • Max. Cable Diameter: 1/4".
  • Mounting: 1" solid shaft with 1/4" keyway
  • Cross Reference: D800-384 DNS 402-32 OMI 2300
    • .......more details
Z9997

Hand Chain 25' for Manual Chain Hoists

  • Not SAE rated.
  • Designed for approx. 35 lbs
Z9005

Shaft Key Straight 3" X 1/4"

  • 3" Straight Key
  • Zinc Plated Steel
DM18-125

Cable Drum Vertical Lift 18' 1100-18 (1-1/4") Pair

  • 18' Vertical Lift aluminum die cast alloy cable drums for 1-1/4" shaft.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 18'-1".
  • Rated Lift per Drum: 660 lbs.
  • Max. Cable Diameter: 3/16".
    • .......more details
H11G08

Hinge #8 x 11 gauge

  • 11 gauge #8 hinge - 0.87 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G02

Hinge #2 x 11 gauge

  • 11 gauge # 2 hinge - 0.69 lbs
  • Bright zinc-plated
  • For use with 7/16" stem rollers
S-HOOK_SMALL

S Hook #8 Small 1/8" x 1-3/8"

CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

  • Stainless Steel Shaft no bearing design
  • Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
  • Rated for 200 000 cycles
  • Pound Load: 145 lbs
.243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
Q074

LiftMaster Coupling (3/4 x 5/8) 3 pcs K75-50130

  • Fits model HCT
  • Same as K75-50130
MDTK

Linear MegaCode Wireless Keypad 318 MHz *** To extent of Inventory Repl. by LPWKP-G

  • Activates multiple MegaCode receivers
  • User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
  • Programming is easy via the keypad; MegaCode receiver auto-learns PIN
  • Backlit keys for easy viewing
  • Wall mounting hardware (2 screws and anchors) supplied
  • Power: 9-volt battery included
    • .......more details
Programming Instructions
AW-14

Miller Edge Air Wave Switch in ABS Box

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Molded enclosure
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
    • .......more details
Instructions ManualSell Sheet
.243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
MK-00005

Micanan Cut-Out Limit Switch

1104-12FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 12' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
25-10402

Truck Door Pull Strap (15.5") with Zinc Retainer for Roll-Up Doors

  • Durable 2" wide black nylon construction for added strength and durability.
  • Custom lengths available
  • Cross Reference: 257000
SD103L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 208/230/460 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
K1D6761-1CC

LiftMaster Logic Board AC

TRACK-SET-2LHR-R

2" Tracks Set 7'-0" Low Headroom 1-3/4" Door Clips for Wood Frame R12 Torsion Rear

  • Complete set - torsion rear
UNI-100-162

Uni-Size Bottom Weather Seal 16'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
EHJW-353-3/4

Doorlec Industrial Jackshaft Op. Watertight ECB 3/4 HP 575V-3Ph

  • Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
  • With DC-2000 controller
  • Watertight and Dust Tight EEMAC Type 4/12
R5115

Bearing 1" Commercial with Flanged Retainer Football Style

  • 1" Commercial bearing pressed in a Flanged Retainer Football Style
  • Type: Steel Bore: 1"
  • Inner Race Offest: 13/64"
  • Rated Load Cycles: 250 lb @ 10000 cycles (8')
26-14623

Truck Door Top Panel (13" x 98") for Todco DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
SOLID_SHAFT_18'

Solid Shaft 1" Keyed 18 ft Galvanized

  • Actual length is approx. 18'-1"
37502

Doorlec DC-2000 Electronic Circuit Board for Constant Pressure Close

  • Works in all Doorlec model openers except R-99
  • Input power to board is 120V
  • 24V DC available on terminals 9 & 11
  • Accessory power on terminals 1 & 11
  • Programmed to work with constant pressure to close
RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card (factory installed)
  • 16 transmitters maximun per receiver.
  • Use part # RADIO-KIT004 when adding or replacing on-site.
  • This is now standard equipment on all Circuit board operators
EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

  • 6" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
10-10882

LiftMaster Chain Guide *** No Longer Available Sold only as a kit

  • Fits model H operator with Logic 5
  • This item is now only sold in a kit. To order use code K72-19979
24040

Doorlec Roller Chain #40 Sold per Ft

210264

Skylink Case Cover Atoms

AIRSWITCH018

Exterior Air Switch SPDT ABS Housing

1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
63000709

FAAC P Limit Switch Magnetic 746/844 (Rack)

  • Compatible with the 746 and 844 motors
  • Replaces discontinued FAAC Part; 7580375
MSJ-6534-M-N1-RH

Manaras MSJ 1 HP 600V 3Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 35 cycles per day > 150 cycles per day
    • .......more details
50308

Doorlec Cam Shaft Assembly Comes With Bearings

  • Fits LJ LJH SGO
LB610-102

Laminated Bumper Standard Black 102" x 10" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
BEA-10LIGHT-A

BEA Modular LED Signal Light Audible Segment

  • Audible Alarm 2.6 KHz ±250 Hz oscillation frequency; maximum intensity 92 dB @ 39.6 in
MOTOR318

Manaras Electric Motor 1 HP 120/240V 1Ph

  • Continuous duty C-flange TEFC 60Hz
2376.200.35.930

Whiting Torsion assembly .200 wire size 35" spring length 93" shaft

112357.0002

Overhead Logic Board for RSX 1/2HP 1PH

  • Fits OPRSXH75015BR
112357.0004

Overhead Logic Board for RSX 575V 3PH

  • Fits OPRSXH75015BR
7131

Whiting Brush Side Seal Assembly; 7/8"

  • Quote required prior to sale to ensure correct fit
K41-0082-000

LiftMaster HD Motor Replacement Kit

  • This service kit is compatible with the following models: HDSL24UL & HDSW24UL
CP-LEV-BRAKE

Lynx Brake Lever

SUPPORT008

Manaras Board Support 1" ** Special Order Only

DC300-75-1-WP

Dyna-Hoist 300 Series Direct Drive BBU 3/4 HP 110/240V 1" Shaft Weather-Resistant ** Quote Only

  • Special-Order. Price by Quote Only
  • Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
  • The 300 series also works with and powers 12V automatic lock systems
  • Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
  • Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
  • 30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering
    • .......more details
SUPPORT002

Manaras Board Support Rivet 0.236" Black ** Special Order Only

51-013611

Blue Giant Sensor Wand Flat 21 inch **Special Order

  • Price by Quote Only
PPK3PHM

LiftMaster Passport MAX 3-Button Keychain Remote w/Proximity Sensor

  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufacture since January 1995
  • 3-button keychain remote with proximity sensor
  • 2x the range of standard remote controls
  • Narrow-band transmission
P-8833T

Pulsar 3-btn 3-Door Transmitter 108817 318 MHz

  • Allstar compatible
  • Three channel transmitter
  • 8 dipswitches 318 MHz
C12

Felco C9 Cable Cutter 3/8" Capacity

  • The FELCO C12 a two-hand wire and cable cutter designed for precision.
  • Made with unbreakable forged aluminum handles and high-quality hardened steel blades
  • The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
  • Length: 19.69 in
  • Weight: 3.75 lb
  • Cutting diameter: 0.47 in
    • .......more details
7176.235*34.930

Whiting Heavy Duty Torsion Assembly .235 x 34" shaft 93"

PRO-HBH-7521U-L

Micanan 3/4HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
7176.218*29.091

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 91"

OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
TS-1-111-GALV-KEY

Tube Shaft 1" x 111 (9'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
ME210-C3

Miller Edge Black Rigid PVC Mounting Channel "L" Shape Sold by the Foot

  • Used on CPT-210 extrusion
15-50B50LGH

Sprocket 50 Teeth 1" Bore 1/4" Keyway w/SS

  • Same as 71-1550B50LGH
K76-34697-3

LiftMaster APS Encoder with Harness 12V

  • For use with various LiftMaster® Commercial Gate Operator Models such as RSL12UL
GALV-343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GAREX-24X12-GLASS

Garex Thermo Window Clear 24" x 12" Glass Only

  • An original Garex glass No frame
GAREX-24X12-WHTE

Garex Thermo Window Clear 24" x 12" White Frame

  • An original Garex window
  • Fits 1-3/4" thick door R16
IP-MDSF

CDVI Point of Entry Exterior Multi-Tenant Flush Mount Video Intercom System

  • Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
  • Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
  • Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
  • IP54 (recommended to be put under a canopy or covering)
  • Operating temperature: -10C to 50C
  • Stainless steel panel
    • .......more details
MCB-DR-SH-ASSY

Lynx Clutch/Drive Shaft Assembly MCB 3/4" x 11-3/4"

  • For trolley operator
GAREX-PAINT-IRN-ORE

Garex Touch-Up Paint Iron Ore

OGH-6214-M-N1-RH

Manaras 1 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
E/BLOP/123

Automatic Systems 3 Kits of Two LED Lights on Arm Option

  • Increases visibility of the arm on BL229 gate operator
10-BR2900

BEA 2 Relay Logic Module + 900MHZ Wireless Technology

  • 2 relay logic module ideal for applications requiring sequencing of electric locking devices and automatic door activation.
  • Day/Night mode allows users to designate "secure" or "unsecure" access for controlled entry points.
  • Push plates with wireless transmitters can be programmed to operate during specific time periods.
  • Programmable transmitters per receiver: 75 (unlimited for universal timer)
  • Input: DRY contact
  • Temperature rating: -22 to 158F
    • .......more details
K21-16699

LiftMaster Transformer 120/240V 75VA 24VAC

  • For use with various LiftMaster® Speed Jack Commercial Door Operators
MGH-6534-M-N1-LH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
29201

Doorlec Transformer 460V pr 120V sec 35VA

  • 460V prImary 120V secondary 35VA
GALV-393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Galvanized Orange Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized