Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
MODKIT065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

  • Modification kit for in-field upgrades
OMJ-6112-ECB

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
Installation ManualSell Sheet
VBELT_5L345

Doorlec VBelt 5L 34.5" *** Replaced by VBELT_5L350

  • Same as part number #19052
PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Programming InstructionsInstructions de programmationSell Sheet
1005-1-3/4-8'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
124772

Roller 3" UHMW Plastic 7-1/4" Stem Sealed Bearing

TCG-2

LiftMaster Tri-Code Commercial Receiver ** DISCONTINUED

  • Two channel commercial receiver compatible with Linear Delta Multi-Code and Stanley radios.
  • Six 3' wired leads
Installation Manual
20386R

Genie Sequencer Board AC Screw Drive

  • For Genie Screw Drive garage door opener models: PRO95 CM8600 CM7600 Series II ISL950A IS550
  • Replaces part number 31184R
75W-RS-BULB

Rough Service Bulb 75W ** Disc. to extent of inventory

.343-3-1/8-SQ-R

Cut-to-Length Square Wire Torsion Spring 24.75" long NO Cones Right Hand

36254R

Genie T-Rail Carriage Assembly

  • This part is listed under several part numbers: 36254R.S 36197A 21784R 20438R
  • For all chain drive openers with steel T-rail assemblies
  • Must be installed with inner slide part # 25605R
34516R

Genie Chain Glide Inner Slide ML Series with Magnet

  • For ML Series with Magnet: 350ML 500ML 700ML 800ML
MX00150

Micanan Complete Clutch Shaft Assembly for PRO-HHD

34538S.S

Genie Magnetic Close Down Limit Switch Assembly 138"

  • For Chain Glide models
104100

FAAC Hydraulic Swing-Leaf Gate Operator S450H 24VDC

  • Hydraulic operator for residential and condominium swing gates with single-leaf max width of 3 m (SB) and 2 m (CBAC).
7001-9-W/B

Commercial Side & Top Weather-Strip 9' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
747

Fasteners Slotted Track Bolt 1/4-20 x 1" 1000/Box ** Unavailable

  • Knurled shank
  • Max torque = 6
7001-7-W/B

Commercial Side & Top Weather-Strip 7' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
LA500HDTKITSTD

LiftMaster Torroid Transformer Kit

  • Powers gate from AC power-120V or 220V single phase.
  • Ideal for applications that prefer AC transformer run operator vs. battery run operator
  • Ideal for areas that experience temperatures below -4 F for extended periods
19-41047

LiftMaster Roller Chain #41 47 Pitch w/Link

  • For model T operators
  • Approx. 2-3 ft
19-5114

LiftMaster Trolley Chain Pack #41 for 14ft Door

  • For 3/4 & 1 HP trolley operators
MOUNTSHAFT018F

Manaras Limit Shaft Kit for MTH MTBH MJH MSJ

  • Limit Shaft Kit for OLD STYLE MTBH/MJH/MSJ Operators
  • 5/8 - 24 10" limit shaft
  • For MSJ built before 2012 (green control box)
Drawing
OTBH-6113-1-ECB

Manaras Trolley Operator 3/4HP 120V 1Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
GH105-L5

LiftMaster Gearhead with Brake 1 HP 575V 3-Phase Logic 5

  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • GH operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
MA025

LiftMaster Padded Barrier Arm Yellow 12ft

  • For use on Mega-Arm gate operator
Additional arm accessories
GH103-L5

LiftMaster Gearhead with Brake 1 HP 208/230/460V 3-Phase Logic 5

  • Includes CPS-U photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
41A5235

LiftMaster 3-Channel European Transmitter 433 MHz

29-10338

LiftMaster Capacitor 70uf 230V 60Hz

  • For models: MJ5011 MH5011 HMJ5011 MT5011 and BMT5011
ME00007

Micanan Jackshaft Drive Shaft 1" x 15" L c/w KW

  • 2 required per machine
  • Sold individually
  • 1" x 15" long
831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming Instructions
860LM

LiftMaster Universal Weather Resistant Receiver

  • Weather-resistant for outdoor mounting requirements
  • Provides convenient access to gated communities industrial facilities and commercial sites all with a single transmitter solution
  • Three channels provide expanded remote control capacity: Channel 1 - 50 remotes Channel 2 - 20 remotes Channel 3 - 20 remotes
  • Multiple remote control options available to provide secure access from the safety and convenience of a vehicle
  • Compact design fits most gate and commercial door operators
  • Compatible with 811LM 813LM and all MAX remote controls
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
41A3589-3

LiftMaster 7ft Belt Assembly for Models '93-2000

  • Full 7' belt assembly for models 1270 1280 and 1280R
T755L5

LiftMaster 3/4 HP 575V 3p Commercial Trolley Operator Logic 5

  • Low profile trolley operator with brake included
Installation ManualManuel d'InstallationSell sheetBrochure
7001-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
767

Fasteners Lag Screw Hex Washer Regular Profile 1/4" x 1" 1000/Box ***NLA

  • 7/16" head
771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

  • 7/16" head
781

Fasteners Hex Head Bolt 3/8-16 x 3/4" 1000/Box

  • 3/8" bolt has 9/16" head
  • Max torque = 22
  • Full thread
K75-18620

LiftMaster Limit Box Kit for SL595 ** Discontinued

  • Kit contains: Limit shaft Limit switch box Lid for cover Panel Adjustment plate Mounting bracket Limit shaft bearing Compression spring Spacer Nut Terminal box Hall effect kit Tinnerman nut double and e-ring
775

Fasteners Hex Head Bolt 1/4-20 x 3/4" 1000/Box

  • 1/4" bolt has 7/16" head
  • Max torque = 6
  • Full thread
CBS-338

Center Bearing Support 3-3/8" 8-gauge with Bearing Sold per Piece

  • Heavier gauge allows for use in both 2" commercial or 3" industrial applications
  • Sold per piece
  • For 1" shaft
  • Double clipped ends
MOD081

Manaras Damp Environment Oil and Dust Tight Modification Supplied with Monitored N4 Eyes

  • For applications where dust water spray oil leaks or any other type of condensation is present.
  • Includes TEFC motor seal-tight conduit and connectors NEMA 4/12 O/C/S push-button station NEMA 4/12 control box
  • If operator is monitored this modification will upgrade the photoeyes to NEMA4 as well
Q400MAU

LiftMaster Relay Module

99554NYHNG

Nylon Hinge Black #4 *** To extent of inventory

  • Equivalent to 14-ga in strength.
MV00292

Micanan Banner Photocell with Reflector

MV-00025-OLD

Micanan 32-Door O/C/S Transmitter CT-32 313 MHz OLD STYLE Deep Buttons *** NLA repl by new style

  • Commercial / Industrial transmitter
SSZP17-1

Solid Shaft 1" Keyed Zinc Plated 17'-1" ** to extent of inventory

MK-00002

Micanan Timer Module (2 wire)

029C98200-PRIMR

W-Style Complete Repl. Door Primer only

  • Primer only no stainless steel package.
  • For doors upto 98" wide x 100" h
  • Fully assembled door manufactured to exact size with all tracking and spring operator assembly
  • Price varies according to size
RBH751L5-LH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0â„¢ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
MT22-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
T501L5

LiftMaster 1/2HP 115/230 Volt 1Ph Commercial Trolley Operator

  • New Logic 5
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
K72-16421

LiftMaster Limit Shaft Assembly LGO****Discontinued and no Longer available

  • Assembly includes: Limit shaft Limit nut Sprocket Roll pin Bushing E-Ring and Chain.
Installation Manual
CH755L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph Logic 5 Left Hand ***Replaced by CRBH755L5-RH

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
CH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4 or CPS-RPEN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
CH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4 or CPS-RPEN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
H751L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by the RBH751-LH

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
H751L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by the RBH751-RH

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
BC096.2

Whiting ColdSaver Door Bright Stainless Steel Clad

  • Include: Track Balancer Standard Hardware and side top & bottom seals.
  • Replacement for Utility Trailer s/n CS39865
17-6014

LiftMaster Motor Pulley 5L 5/8" ID x 2" OD

  • Fits model H operator with Logic 5
  • 5/8" ID x 2" OD
42-31246

LiftMaster Terminal Block 20A 600V

  • 3-position
178B35

LiftMaster Curved / Bent Arm Kit (41B0035B)

  • Will work with most residential garage door openers
  • Also known as: 4178B0035B 178B32 41B0035B 4178B35 178B35 012385990357 178B35B
UTIL013

Utility Switch Roller Lever Arm *** No Longer Available

  • Telemecanique # ZCKY-41
26-14625

Truck Door Top Panel (15" x 98") for Todco DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
26-94625

Truck Door Top Panel (15" x 98") for Whiting DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
26-94623

Truck Door Top Panel (13" x 98") for Whiting DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
71B240G

LiftMaster Brake Kit 230/240V with Solenoid Field Install SL585 and SL595

Instruction Manual
41D217

41D217

  • Fits model 8550
41DB001-1

LiftMaster Circuit Board Assembly

  • For belt drive unit model 3500 (315MHz)
  • Assembly includes: Board end panel and light socket
  • Also known as 041DB001-1C
7001-14-CREAM

Commercial Side & Top Weather-Strip 14' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (10)
7001-12-CREAM

Commercial Side & Top Weather-Strip 12' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (10)
7001-7-CREAM

Commercial Side & Top Weather-Strip 7' Long - Cream 7001-CC (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
7001-8-SANDSTNE

Commercial Side & Top Weather-Strip 8' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
7001-7-SANDSTNE

Commercial Side & Top Weather-Strip 7' Long - Sandstone 7001-SS (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
75-10170

LiftMaster Trolley-Slider Assembly (08-10169)

  • For LiftMaster trolley models MT T GT
  • Also known as: 307085008 75-10170 08-10169 085008 7510170
GTS-16

Garaga Top Seal Single-Fin Black 16ft ** To Extent of Inventory

  • Thermoplastic resin weatherseal co-extruded.
  • For Commercial / Residential applications
  • Screws directly to the top of door no retainer required
165-A

Fusible Link For Loads 1 to 30 lbs

  • Length is 2.625" width is .875"
  • Distance between centers is 1.75"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
MOFR-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Receiver

  • Maximum sensing range is 20 meters
  • 11-Pin
  • 8 inch optical beam angle.
  • Waterproof for harsh environments i.e. water dust steam etc.
  • To be used with amplifier series S142
  • Supplied with 15 m of shielded cable.
    • .......more details
Installation Manual
K74-16420

LiftMaster Limit Switch Kit for LGO **DISCONTINUED

Installation Manual
9150000701

Safety Cable for Extension Spring 3/32" 7x7 10' Sold as a Pair

  • Looped on one end the other is raw (no stops)
  • Used to wrap around the body of an extension spring to contain the wire should the spring break.
9150000670

Extension Cable 1/8" 7x7 14' Sold as a Pair

  • Cable assembly for extension spring door - looped one one end the other is raw (no stops)
MK00785-RATED

Explosion Proof Killark Labeled 3-Btn Pushbutton Control Station

  • CSA and UL labeled station
  • Three button O/C/S Nema-7/9
  • Surface mount
02-410B

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button and BEST Cylinder

  • Outdoor Surface Mount Nema 4/12 station
  • Standard key cylinder is replaced with BEST cylinder
  • Open/Close spring return to center (off)
  • Key removable in center position only
  • With Stop button
41A6104

LiftMaster Cable Tension Monitor

  • Used on jackshaft model residential garage door openers
Z3/Z5

Erone Z-Bracket for Maglock ** No Longer Available

  • For use on: 300-KG 400-KG and 500-KG electromagnetic locks
  • High quality aluminum construction
  • Dimensions: 175mm (long) x 50mm (wide) x 50.5mm (depth
Wireless System Chart
SPR41B60X1

Sprocket 41B60 for a 1" Shaft

K72-19974

LiftMaster Output Shaft Kit

  • Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers
Installation Manual
19-48047M

LiftMaster Roller Chain #48x47

  • #48 x 47 pitch with master link
  • Internal reduction chain
  • Length is 24"
27-20113

Truck Door W-Style Spring Assembly Roadside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
K75-10177

LiftMaster Brake Hub Assembly

  • Assembly includes: Brake hub set screw push-on fastener and feather key
SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

  • Red and Green LED traffic light
  • Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
  • 24 volt DC input voltage only
  • Long lasting low power consumption
  • A simple reliable and cost-effective way to reduce accidents around the loading dock.
  • Available in two colors: safety yellow or black.
    • .......more details
Installation InstructionsInstructions d'installationWiring DiagramSchéma de connexion
7FT-BELT-LDO

Linear 7ft Belt Drive Rail for LD050/LS050/LDCO (HBT7C)

  • 7ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
7FT-CHAIN-LDO

Linear 7ft Chain Rail for LD050/LS050/LDCO (HCT7C)

  • 7ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
2704.177_270

Whiting Roadside Torsion Spring 2-3/16" ID 27" Long

  • Torsion spring wire only
  • .177 wire size
2704.171_250

Whiting Roadside Torsion Spring 2-3/16" ID 25" Long

  • Torsion spring wire only
  • .171 wire size
21-10298

Transformer 100VA

  • Multitap Transformer 120/208/277/575V Primary 24V Secondary 100VA 50/60 Hz
  • Fused at 5A
49564

Stanley Chain Drive Traveler

  • Compatible with all Stanley chain drive units from 1982-present
  • Not compatible with C-Channel models
  • Same as part no. 3701965 3703375 3702540
  • If trolley slider no. 24851 is also required order part number 49563
Installation InstructionsInstructions d'installation
PROMI-500

Erone 1-Door Stand Alone Card Reader / Keypad **DISC

  • 500 users (proximity badges and/or codes)
  • 3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
  • Audible & Visual feedback
  • 1 request-to-exit input
  • Tamper switch
  • 1 form C door relay output (3A/125V)
    • .......more details
PROMI-500 Wiring Diagram & Instructions