Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MK500GS

LiftMaster MiniKey Stand-Alone Keypad System ** No Longer Available

Self-Contained Keypad System for Door and Gated Entrances
500 Code capacity
Grained stainless steel Surface Mount
Dimension: 4-1/2" H x 4-1/2" W x 3-1/2" D
Same as SN7000255
Sentex Keypad

.......more details

Installation Instructions Programming Instructions Sell sheet

1104-14FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 14' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-7FT-GREY

Residential Side & Top PVC Weather-Strip with cap 7' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

K74-34582-1

LiftMaster Plastic E-Box Assembly for LA500CONT

Plastic replacement box only

LA500-SLR-PKG

LiftMaster Solar Package for LA500 Gate Operator

Solar package includes: 2 - 33AH batteries 2 - solar panels (SOLPNL20W12V) battery harness (LA500SLRHARN) and the battery tray (K10-36183).
Must be used with the LA500-1PKG-XLM
Solar option NOT compatible with LiftMaster Internet Gateway
Solar option not recommended in certain areas - please call before ordering

Installation manual Manuel d'installation Sell sheet Brochure

466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

Up to 100 000 individual codes
Mounts to wall or gooseneck post
Incl. 6-volt alkaline battery
Illuminated stainless steel faceplate and keypad
Tamper-resistant case and "low battery" indicator
Requires 412HMC receiver

.......more details

Installation Manual Sell Sheet

G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

Increases one number each time current is applied
Connects to the 24 volts of contactor coil
Simple 2-wire connection
Same as 50-12862

71-REDGRN-HCT

LiftMaster Red/Green Warning Light Box **DISCONTINUED

Signals if door is moving or stationary
Compatible with model HCT

Installation Manual

580LM

LiftMaster Alternate Power System RJO Interface

Exclusively for use with Wall Mount Opener model 8500
Makes installing the Wall Mount Opener model 8500 easier when an outlet is not available within 6 feet
Puts power right where you need it and removes the need for an electrician
UL-approved
Includes transformer box interface box 35 feet of low-voltage wire and all required mounting hardware

Installation Manual Manuel d'Installation

CLUTCH-SHAFT-AS

Lynx Complete Clutch Shaft Assembly for HDC Operators 3/4" x 17-1/2"

Fits all HDC operators - waterproof or not.

21-10298

Transformer 100VA

Multitap Transformer 120/208/277/575V Primary 24V Secondary 100VA 50/60 Hz
Fused at 5A

DF086.1

Whiting Dry Freight Door 3/4" with Track Balancer Standard Hardware and Side Seals

Includes side seal upgrade

22405-KEYLOCK

Doorlec Weatherproof Pushbutton O/C/S Key Lock with On/Off Switch

25-01575

Truck Door Beverage Body Roll-Up Door Cable

Includes one (1) pair of cables
Zinc plated tear drop
Length: 110 inches
Cable eye: 1/4
Cable construction: 7 x 7 galvanized

22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

Steel construction Zinc plated
Cross ref: Eberhard 4300

11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

Used on slide gate operators using #50 chain.
Also referred to as adjuster bolts

91-G0149

LiftMaster Idler Bolt w/Zinc Fitting

Fits SL595

G808001

LiftMaster Lock and Key Kit

Lock and Key Replacement Kit. Compatible with LiftMaster® Models BG770 and BG790 Barrier Gate Operators
Also known as: K808001 80-8001 808001

CR-2000

EMX Keypad/Card Reader Waterproof 5401-1

Back-lit keys for nighttime operation
2000 users (card or passcode)
Rugged waterproof design and vandal resistant
9-24 VDC
Tamper alarm
Door call button

.......more details

Instruction Manual Spec Sheet

SOLID_SHAFT_8FT

Solid Shaft 1" Keyed 8 ft Galvanized

actual length is approx. 8'-1"

STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

1-button 1 N/O contact
Plastic

SPREADER002

Chain Tensioner for 1" / 1-1/4"

Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

MJ7104

Doorlec Utility Switch 21800

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller

BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

For use with 2" rollers
Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
Same as part number 263

OMNI-EXB

LiftMaster Relay Module

1013-1-1/4-16'

Rigid Vinyl Bottom Retainer L-Shaped 16' Long

For door thickness: 1-1/4"

CPS-3

LiftMaster Option Card with CPS-L Eyes

For applications requiring two sets of photoeyes ( CPS-III)

Installation Manual

MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

Activates one gate or device
Supplied with F-connector and whip antenna
Mounting bracket supplied
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

V300-TS

Top Seal Weather Strip 100 ft per Roll

For use with bottom retainers installed on top of door.
Vinyl: Black

655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

STAR450-315

LiftMaster Commercial Access Control Receiver 315MHz *** Discontinued

Rapid learn feature programs multiple transmitters in just seconds
Ideal for gated communities parking lotsand garages.
Works on a tri-band frequency

Programming Instructions Sell sheet

MU00001

Micanan Swivel Pulley

For models PRO-H / HB

SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output relay
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Brochure Wireless System Chart

MI00007

Micanan Front Idler Assembly for PRO-APT/T

For model PRO-APT / T
3/4" x 5.79" LG

50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

TUBE_SHAFT_8FT

Hollow Shaft 1" x 8'-10" Galvanized 16 gauge

02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red

Open/Close/Stop allows complete control of the door.
Compatible with all commercial door operators.
NEMA 4 4X 12 13
Outdoor surface mount station with polycarbonate enclosure part # XALD03H7

Sell sheet

.234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.218-258-R

Cut-to-Length Torsion Spring .218 x 2-5/8" Right Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.218-258-L

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.234-2-L

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

C-134-INSTALLED

Cones 1-3/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF175

.273-134-L

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.262-134-R

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MOUNTSHAFT018

Manaras Limit Shaft Kit Opera

Drawing

107999.0001.S

Genie Motor Pulley for Overhead JST

CB14B0500

Cable 1/4" 7x19 500' Galvanized

Galvanized Cable 1/4" 7x19 500ft spool.
Cable break strength: 2000 lbs

Comparison charts

ER100

Carlo Gavazzi Reflector 4" (100mm) Square

High quality reflector for retro-reflective photoelectric switches
Dimensions: 100 mm x 100 mm 9.2 mm thick

MV00077

Interlock Switch for Sectional Doors

Mounts on the door track to prevent the use of the operator when the door is locked

14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

I-Beam Chain Drive Rail for model 3595

77810.0001

Overhead Door Box Assembly Cushion (#111389.0001.S) ** Price by quote only

Garage door operator bracket for older Overhead Door residential models (Automate 70 Touch n Go R-80 100 100SS 1000) and commercial garage door openers.

41A5021-9G-315

LiftMaster Circuit Board Assembly

Board: Security+ 315 MHz
Aeesmbly includes: circuit board and end panel
Also includes 1 Multi-Function wall ctrl panel - 2 wire
For ATS2113X model
For older ATS operators use replacement board 41A5021-1ATS

20-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Red

2 strand 22 gauge tin-dipped copper hook-up wire
Color coded White & White/Red wires

TC2

Tri-Code Transmitter 2-btn Visor - DISCONTINUED

Tri-Code series 2 channel transmitter model TC-2
300 & 310 MHz simultaneously
Each channel can be set on a seperate code format
Works with both 8 and 10 dip switch systems
Replacement: 380UT

355LMC

LiftMaster Universal Radio Control Receiver 315 MHz **NLA

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up to 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the purple learn button (ERT format)
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

Programming Instructions Instructions de programmation

ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

External 8" coaxial antenna included
Security+ rolling code technology and/or Dip switch compatibility
12 VDC or 18-35 VAC/DC jumper selectable
Momentary or constant contact selectable
For replacement antenna use 41C3196
Accepts up to 31 remote control codes on Normal Security setting

.......more details

Programming Instructions Instructions de programmation

TUBE_SHAFT_10FT

Hollow Shaft 1" x 10'-10" Galvanized 16 gauge

When ordering order one foot longer that actual door width

374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

Compatible with wireless keypad model number 377LMC
Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
This transmitter is replaced by 894LT

LSGRY

Loop Sealant Cartridge Grey 29oz

Also available in black (LSBLK)
Can be installed in sub-zero temperatures as long as the surface is clean and dry
Loop sealant gun sold separatley # LSGUN

71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual

29-31245

LiftMaster Relay 12VDC 250VAC 4-Pin SPDT C & D relay 3-phase only

C & D relay 3-phase only

T-833

FL-Allstar 3-btn 3-Door Transmitter 108817-311 MHz

This three channel transmitter controls up to three doors (open-close) or one door (open-close-stop).
It has a height switches encoder with three positions: + 0 and - .
Manufacturer's model number: 8833T (190-108817)
Dimensions: 4 5/8" x 2 1/4" x 7/8"

Programming Instructions

CAM011

Manaras Limit Cam

Limit cam for Mountshaft018A 018B
2 cam's required per shaft

19-48HL

Half Link #48

Half link for #48 chain (#410)

41A5266-1

LiftMaster Brackets for Snappy Sensors (41A5266-3) *** Discontinued

For units from 1993- present equipped with safety sensors
Same as 41A5266-3
For use with with 41A5281
New Gen (2021+) snappy beam sensors 041-0136 are compatible with these brackets and the new 041-0155 brackets
The new brackets (041-0155) are not backwards compatible

41A6102

LiftMaster Power Door Lock

For Jackshaft models

.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange. **NLA

Wire size: .468
Inside diameter: 5-1/4"
Length: 12 ft

.319_3-3/4"-RH

Torsion Spring .319 x 3-3/4" x 12ft RH Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft

.331_2-5/8"-RH

Torsion Spring .331 x 2-5/8" x 12ft RH Red/White

Wire size: .331
Inside diameter: 2-5/8"
Length: 12 ft

.250_2-5/8"-RH

Torsion Spring .250 x 2-5/8" x 12ft RH Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft

.306_2"-RH

Torsion Spring .306 x 2" x 12ft RH Red

Wire size: .306
Inside diameter: 2"
Length: 12 ft

.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

.273_1-3/4"-RH

Torsion Spring .273 x 1-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 1-3/4"
Length: 12 ft

.250_1-3/4"-RH

Torsion Spring .250 x 1-3/4" x 12ft RH Green

Wire size: .250
Inside diameter: 1-3/4"
Length: 12 ft

.243_1-3/4"-RH

Torsion Spring .243 x 1-3/4" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 1-3/4"
Length: 12 ft

.234_1-3/4"-RH

Torsion Spring .234 x 1-3/4" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 1-3/4"
Length: 12 ft

.225_1-3/4"-RH

Torsion Spring .225 x 1-3/4" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 1-3/4"
Length: 12 ft

373LMC

LiftMaster 3-btn Security+ Transmitter 315MHz

Visor clip and 3V lithium button cell (CR2032) battery included.
Same as Chamberlain model 953D

373LMC Manual

50307

Doorlec Cam Shaft Sub-Assembly EHJ ETH ETBH LJH

For models; EHJ ETBH and ETH
Assembly includes: Cam shaft (26140) Oilite (11801) x 2 Sprocket 41B12-5/8" (31118) Flange Bearing (28002) x 2 and nuts.

12561

Doorlec Brake Drum 4" Diameter

Fits all Doorlec operators equipped with brake shoes

MK00641

Micanan Smart 10.0 Full Feature Circuit Board Monitored with 5 Relays

For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
Board has P1 & P2 terminals
Up to 20 transmitters can be programmed

Instructions Manual

MJ00002

Micanan Brake Shoe - Right **No Longer Available**

Only available in complete kit # MJ00013 or MJ00014 for PRO-GH

MJ00005

Micanan Clutch Pad 3/4" ID

Used on all Micanan commercial operators & PRO-GO gate operator
3/4" inside diameter 4" outside diameter

CP-SW-AT

Lynx Single Limit Switch

PL-BO7-CRGSLIDE

Lynx Carriage Assembly (Nylon) ** No Longer Available

Proline / Lynx 455 Plus trolley slide assembly
For operators built from 2000 +

PL-A03-NEW-BRD

Lynx Replacement Logic Board New Version

New version board works on operators with a red cover
Replacement logic board for Napoleon/Lynx Proline garage door opener
For openers built June 2008 or later (date code 0806 or newer)
This board does not have a transformer.

CP-SW-HOIST

Lynx Interlock Switch

SEL2641R433-C2P

Erone 2-Relay Stand Alone Power Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (230Vac)
Self-learning memorization
Relays with Pulse step or delayed operating mode.
Power requirements: 12/24Vac/dc
Dimensions: 140 x 115 x 53mm (5.5 x 4.5 x 2in)

.......more details

Installation Manual Wireless System Chart

SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
2 NO relay + 2 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output Relay number 4 can be setup to latched output
Can be used for O/S/C
Power requirements: 12/24Vac/dc

.......more details

Sell Sheet Brochure Wireless System Chart

OSH-6532-ECB

Manaras Opera-SH 1/2HP 600V 3Ph with Electronic Circuit Board ** To extent of Inventory

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"