Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SPREADER002

Chain Tensioner for 1" / 1-1/4"

Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

MJ7104

Doorlec Utility Switch 21800

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller

3AG3

Miniature Fast Acting Glass Fuse 3 Amp 250V (5/pkg) - 766124

6 x 30mm miniature fast acting glass fuse
Rated voltage: 250V
Rated current:3A
ROHS compliant

19-50ML-NP

Master Link #50 Nickel Plated

15-50B24LGH

Sprocket 24 Teeth 1" Bore 1/4" Keyway 2-SS

10FT-TROLLEY-SET

LiftMaster 10' Track Set for Trolley Operator 10-5810-P (2 pcs) *Actual length 155"*

Actual Length 12' 11"
Includes 2 pieces of 10-5810-P

.207-258-L

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

For do-it-yourself installation use part no. SF258

41D794

LiftMaster Replacement Motor with Positioning Sensor

Electric motor for model 3850

Installation Manual Manuel d'Installation

475LMC

LiftMaster DC Battery Backup *** To Extent of Inventory

For use in Liftmaster 3500 3800 and 8500 models
1 year warranty

Installation Manual Manuel d'Installation

ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

.306_5-1/4"-LH

Torsion Spring .306 x 5-1/4" x 12ft LH Red

Wire size: .306
Inside diameter: 5-1/4"
Length: 12 ft

.262_2"-LH

Torsion Spring .262 x 2" x 12ft LH Red/Yellow

Wire size: .262
Inside diameter: 2"
Length: 12 ft

71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

omplete disk brake assemble including 2-wire solenoid

Installation Manual

T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
It has a height switches encoder with three positions: + 0 and - .
Manufacturer's model number: 8833TC (190-109023)
Dimensions: 4 5/8" x 2 1/4" x 7/8"

Programming Instructions

.312_6"-RH

Torsion Spring .312 x 6" x 12ft RH Yellow

Wire size: .312
Inside diameter: 6"
Length: 12 ft

.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

19-50ML

Master Link #50

For #50 chain
ANSI Standard Carbon Steel

19-41ML

Master Link #41

For #41 chain
ANSI Standard Carbon Steel

17311

Doorlec AT1035D 1-btn Mini Transmitter 313 MHz ** To extent of inventory

One block of 10 dip-switches for programming
Compatible with Doorlec 17307 receiver (DC-3000R)
Includes 12V battery (GP23A)

H14G01

Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#1 position
Use between sections 1 and 2 or in the center position
Same as part number 241

.......more details

CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

Reversing contactor with 24V coil
Same as part # LC2K12107B7
Demensions: 3.5" long x 2.25" wide x 2.25" high
Use 03-8024K as possible replacement

308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

Open/Close remote for 2 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Easy access to battery and coding switches - 10 dip switches
Power: 12-volt battery
Codes: 1024 codes for each channel (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

Activates two 318MHz MegaCode receivers independently
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery incl.
Codes: 1000000+ (MegaCode format)
Dimensions: 2.16" W x 3.75" H x .95" D

.......more details

Programming Instructions

300BH

3" Heavy Brush Insert 8ft Long

Polypropylene bristles
Same as model MS1712

4005-16FT

Aluminum Retainer only for Heavy Brush 16' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

4010-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

1007-1-5/8-16'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 16'2"

For door thickness of 1-5/8" to 1-3/4"

1005-2-24'

Aluminum Bottom Retainer U-Shaped 24' Long***Actual Length 24'4"***

For door thickness 2"

1003-2-10'

Aluminum Bottom Retainer L-Shaped 10' Long

For 2" thick doors.

1003-1-5/8-14'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

1104-8FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-16FT-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

Aluminum retainer with black dual-fin vinyl

25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

Double - Loop
25" long 42" stretch 90 lb load
Sold individually
Same as part number 109
Rated for 10000 cycles

Spec Sheet

26-14525

Truck Door Intermediate Panel (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

H11G10

Hinge #10 x 11 gauge

11 gauge # 10 hinge - 0.92 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

K20-1050C-2P

LiftMaster Electric Motor 1/2 HP Nema 1

19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

Chain pack only

SEDK2641A4

Erone Wireless Radio Keypad 433 MHz

Wireless RF Digicode® keypad.
Frequency: 433.92 MHz.
For automatic door opening in sequential mode.
6 channels to control 6 different relays or 6 different RF receivers.

Programming Instructions Wireless System Chart

BC096.2

Whiting ColdSaver Door Bright Stainless Steel Clad

Include: Track Balancer Standard Hardware and side top & bottom seals.
Replacement for Utility Trailer s/n CS39865

LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

PBTL-3

Exterior 3-Btn O/C/S Control Station with Key Lockout Nema 4

Surface mount
Metal enclosure
Dimensions: 7" H x 2-3/4" W x 3-1/2" D

Sell sheet

1005-2-10'

Aluminum Bottom Retainer U-Shaped 10' Long**Actual Length 10'1"***

For door thickness 2"

DB13

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

Standard size panel primer only

MCJH-34-115-CON-R

Lynx MCJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand ** Replaced by CDJH

Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).
Adjustable spreader bar assembly included.

.......more details

M-VERSION-N4

Manaras Monitored Entrapment Protection Option Upgrade Mont + N4/12 Eyes

Upgrades added when purchasing a commercial operator

IRB-S

EMX Industries Mounting Screws for Photoeyes Sold as a Set of 2

Two sets of screws are required for each bracket installed

1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

.312-2-5/8-LH-C

Torsion Spring .312 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 2-5/8" Length: 12 ft

MOD163A

Manaras Heater in Reducer & C-Box 120V-1P 24VAC 15W + 30W

This modification is an option when ordering a commercial operator

1104-16FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Dark Sandstone (DDG)

Sandstone rigid vinyl retainer with dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

JHDC22X4BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 480V 3PH 60 Cycles/Hour 2200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

A10U49

Erone Long Range UHF Reader U4GO 33FT

The readers which operate with AES128 encryption offer secure access in settings like parking facilities gated communities campuses hospitals and more
Stand-alone or Wiegand mode
Up to 33' (10 m) read range
Detects vehicles up to 50 mph (80 Km/h)
Includes receiver power supply and mounting bracket

2300-925-BLACK

Linear Operator Cover Only Black

The Linear 2300-925-BLACK is a replacement black cover for the following series of gate operators: SWR SWC and SWD
Made of Polyethylene

K41-0387-000

LiftMaster Maxum Encoder Drive Sprocket & Hardware

HW-BRG-1

Lynx Bearing 1" x 2" OD

2 in total on a MCJH

63000709

FAAC P Limit Switch Magnetic 746/844 (Rack)

Compatible with the 746 and 844 motors
Replaces discontinued FAAC Part; 7580375

3257

Whiting General Purpose Bottom Seal #80841

Quote required prior to sale to ensure correct fit

7131

Whiting Brush Side Seal Assembly; 7/8"

Quote required prior to sale to ensure correct fit

201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

CRHMOFE

Pentagon Crank Handle for Manual Override Flexible End *** Price by Quote Only

C12

Felco C9 Cable Cutter 3/8" Capacity

The FELCO C12 a two-hand wire and cable cutter designed for precision.
Made with unbreakable forged aluminum handles and high-quality hardened steel blades
The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
Length: 19.69 in
Weight: 3.75 lb
Cutting diameter: 0.47 in

.......more details

OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

H11G09-SS

Hinge #9 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H11G04-SS

Hinge #4 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

GALV-306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-6-INSTALLED

5001-16-SANDSTN

Residential Side & Top Weather-Strip 16' Long - Sandstone

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

TDC41-10

LiftMaster Trolley Chain Pack #41 1200/2200LBS 10ft Door

Chain pack only
TDC41-10 is a #41 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 10' commercial doors

8071-080

DoorKing MicroPlus 3-btn Rolling Code Transmitter

Keychain style remote
Black
Not compatible with HomeLink
Dimensions: 2.5 x 1.5 x .5 inches

BCSI-PM22

Pivin Drapeau Hex Bolt 3/8-16" *** Price by Quote Only

99000568-PER-FT

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)

GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

041-0400-000

LiftMaster Door Shaft Collar

Fits with LiftMaster model #98032

K41-0391-000

LiftMaster EMI Board 1200 (120VAC/240VAC)

For Maxum op

GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

21" panel = 4 grooves 24" panel= 5 grooves
COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
Minimize the heat transfer between the inside and outside of your garage.
LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
WOOD END BLOCKS Suitable to receive steel end caps
HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor

.......more details

OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

K41-0254-000

LiftMaster Electric Motor IHSL24UL

Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
Compatible with the following models: IHSL24UL IHSL24ULMC

SPBCU1

NICE MBAR/LBAR R10 Logic Control Board

OTBH-6533-M-N1

Manaras Trolley Operator 3/4 HP 600V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

10BOX45RNDSM

4.5" Round Surface Mount Box

4.5 inch round surface-mount box for 4.5 inch round push plates.

OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

MA005C

LiftMaster Slip Clutch Option Mega Arm

This is a replacement slip clutch option for Mega Arm gearbox

041-0035

LiftMaster Chain Spreader and Sprocket

For use with various LiftMaster® and Chamberlain® DC Chain Drive Garage Door Openers.
Complete kit includes: Chain Spreader Sprocket and C-Clip
This replacement part is compatible with the following models: 8580WLB