Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
CP-LX740

Lynx 3-btn Transmitter 372 MHz for Commercial Op. with UL325 Board

  • UL325
  • Works on the new Lynx commercial operators
  • For 3 doors
  • Not compatible with the new 372HMz residential operators
Programming instructionsCompatibility chart
JDMG-LG-2030

GDI Jackshaft DC 115V

  • Brushless DC high reliability high efficiency and low maintenance motor
  • No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
  • Soft start soft stop
Sell sheetTechnical document
32-34792

LiftMaster Gear Reducer Nema 56C 30:1

  • Compatible with LiftMaster® Model SL585 Slide Gate Operators
  • Same as K32-34792
25E10050

Truck Door Center Hinge Black E-coat finish for Todco Roll-Up Doors

  • Steel construction Black E-coat finish
MAW123-BLK-U

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
RELAY024

Manaras Relay DPDT 24VAC

  • Used in all heavy-duty operators as well as MLT and Opera-MH/MJ
27-20115

Truck Door W-Style Spring Assembly Roadside LHW 35" Long

  • Wire thickness: .187
  • Assembled Spring length: 35 inches long
  • Inside diameter: 2 3/16"
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger design and internal spring spacer.
ME123-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
41A5507-B

LiftMaster Receiver Logic Board for 2500 (390 Mhz) ** Discontinued

  • With end-panel
  • Also known as 41A5507 41A5507B
27-48-400

Extension Spring 8' Door - 400 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 400 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-380

Extension Spring 8' Door - 380 lbs Gold

  • Single - Loop
  • 27" long 48" stretch 380 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
EP2989

Exhaust Port 5" with latch long barrel ** Discontinued **

  • 5" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
PD180CBT30MU

Carlo Gavazzi Photoelectric Through-Beam Emitter 30M

  • Emitter only. If receiver is required order PD180CBT30Q
  • For Industrial doors and Gates
  • Range: 30M
  • Relay output
  • Supply voltage emitter: 2 x 3.6VDC lithium batteries
  • Dimensions: 180m x 51 x 49m
    • .......more details
Installation Manual
1224-1-3/4"-WHT

Elton Commercial Window for Flush Doors 1-3/4" thick 1224 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
23-10916

LiftMaster Hoist Interlock Switch SPDT

  • Interlock switch for LM commercial door openers with hoist disconnects
  • 15A 125/250VAC
.363-3-3/4-LH-C

Torsion Spring .363 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .363 ID: 3-3/4" Length: 12 ft
RN0024-SS

Roller 2" White Nylon 4-1/2" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
  • UHMW tire
Q029

LiftMaster Limit Switch for Elite Gate Operators (K23-50099)

  • Sold individually
  • For Elite Miracle-One arm SL3000 CSW200 and robo slide and robo swing gate operators.
  • Same as part no. K23-50099
BK304

Jamb bracket J-04 #4 12 gauge

  • Sold by the piece
  • Height 3.00" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

  • Fits square trolley rail only
  • Same as 183A163
SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

  • Actual length is approx. 16'-1"
1110197

LiftMaster Take Up Bolt 3/8"-16

  • Measures 3-15/16" Long
  • Also known as: G115015 1110197 115015 11-10197
71-EB3PH

LiftMaster Field Install Brake Kit 230/460V 3PH for L5 Operators Ext. Mount

  • For operators already in the field without a brake
Installation Manual
CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

CLUTCHPAD005

Manaras Clutch Pad 5/8" ID 4" OD

  • Made from commercial grey vulcanized fiber
PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Programming InstructionsInstructions de programmationSell Sheet
41A5615

LiftMaster Chain Spreader

  • For models 2575 3575 3275 PD752 PD758 and others
19-41047

LiftMaster Roller Chain #41 47 Pitch w/Link

  • For model T operators
  • Approx. 2-3 ft
36-RWB-PAIR

Winding Bars Round 36" Set of 2

  • Cold rolled hardened steel.
  • Machined to 1/2" at one end with 5/8" outside dia. on the other.
  • Sold as a pair.
5463.96

Whiting Vinyl Top Seal 96" 1-1/2" wide

  • Original TempGuard top seal used on Supreme body trucks from 2009
  • One piece rigid plastic cap retainer with a flexible vinyl seal.
MK500GS

LiftMaster MiniKey Stand-Alone Keypad System ** No Longer Available

  • Self-Contained Keypad System for Door and Gated Entrances
  • 500 Code capacity
  • Grained stainless steel Surface Mount
  • Dimension: 4-1/2" H x 4-1/2" W x 3-1/2" D
  • Same as SN7000255
  • Sentex Keypad
    • .......more details
Installation InstructionsProgramming InstructionsSell sheet
G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

  • Increases one number each time current is applied
  • Connects to the 24 volts of contactor coil
  • Simple 2-wire connection
  • Same as 50-12862
K75-10177

LiftMaster Brake Hub Assembly

  • Assembly includes: Brake hub set screw push-on fastener and feather key
28-32085

Truck Door 2" Vertical Track with Holes 95.00" Long for Whiting Roll-Up Doors *** To extent of inventory

  • Galvanized steel 14-gauge construction
  • Tabbed at both ends for proper alignment at track joints and to allow universal fit for both left hand and right hand frame sides.
  • Holes drilled to allow for faster plug weld installation to frame
  • For use with 2" diameter steel or nylon rollers
08-11013

LiftMaster Bevel Gear 3/4" ID

  • Fits the LiftMaster GH operator
PRO-GH-VFD

Micanan Variable Speed 1 HP 208/230V 3 Phase Operator

  • Variable Frequency Drive Operator
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
RS1029

Roller 2" Steel 9" stem- WL 10 ball

  • Steel Roller Wheel Diameter: 2"
  • Working Length: 9.5" Overall Length: 10.5"
  • Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)
MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

  • Operates on 12-24 volts AC or DC power
  • One channel
  • Whip antenna
  • 3-foot antenna coax and bulkhead connector
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)
    • .......more details
Programming Instructions
.207_1-3/4"-LH

Torsion Spring .207 x 1-3/4" x 12ft LH Brown

  • Wire size: .207
  • Inside diameter: 1-3/4"
  • Length: 12 ft
24-115-1

Relay 8 terminal 115VAC DPDT

  • For most operators with contactor
  • Will work on Liftmaster MH Lynx MCJH and more
.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange. **NLA

  • Wire size: .468
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.393_5-1/4"-RH

Torsion Spring .393 x 5-1/4" x 12ft RH Orange

  • Wire size: .393
  • Inside diameter: 5-1/4"
  • Length: 12 ft
RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 1 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
  • Replaced by RADIO-RE900A
    • .......more details
Programming Instructions - ECBProgramming Instructions - CONT
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
Programming Instructions
2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long Galvanized

  • Most common torsion spring for cube trucks
  • Specs: .162 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.162*180
9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz ** NLA

  • Open/Close mini remote for 1 door
  • Compatible with Allstar and MVP receivers
  • Tab for key ring
  • Power: 12-volt battery
  • Codes: 19683 (set by nine trinary dipswitches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
111645

Allstar MVP 1-Channel 4-Wire Gate Receiver 318 MHz ***Replaced by P-9931R-4F

  • One channel
  • 4-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming Instructions
1104-7FT-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
95-00116

Truck Door Rivet 1-1/4" Stainless Steel ** To Extent of Inventoy

  • Stainless steel construction
  • Round head design
  • Cross Reference: T #89217-0040
R5998

Shaft Collar 1-1/4" OD 2" 2 Set Screws 3/8-16

  • With 2 set screws
Z9404

Coupler 1-1/4" Bore Adjustable

  • Malleable iron for strength
  • With 2 jam nuts
  • 1-1/4" Bore with 1/4" keyway
DM120

Cable Drum High Lift 120" 5750-120 Pair

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
H11G05

Hinge #5 x 11 gauge

  • 11 gauge # 5 hinge - 0.76 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G02

Hinge #2 x 11 gauge

  • 11 gauge # 2 hinge - 0.69 lbs
  • Bright zinc-plated
  • For use with 7/16" stem rollers
H11G01

Hinge #1 x 11 gauge

  • 11 gauge hinge #1 - 0.61 lbs
  • Bright zinc-plated
  • For use with 7/16" stem rollers
  • Item code # 224185
CBA18B08

Cable Assembly 1/8" 7x19 114" Sold per Pair

  • Galvanized cable assembly for 8ft door (114" = 9'-6")
  • Aircraft cable made of 19 wires per strand and 7 strands per cable
  • Sold as a pair
  • Same as part number 458
R5211

Cast Iron Pulley 5" with stud

  • 5" Cast Iron Pulley with double stud
  • cast iron pulley mounted on two pressed sealed bearings
  • Maximum cable diameter: 1/4"
4X16PO50

Devanco Loop 4' x 16' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

  • Stainless Steel Shaft no bearing design
  • Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
  • Rated for 200 000 cycles
  • Pound Load: 145 lbs
SLT4-22

Rolling Steel 3" Crowned Slat 22-ga Galvanized

CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

25-10502

Truck Door Max Strength Steel Keeper for Todco Roll-Up Doors

  • Superior strength heavy-duty cast grade 30 steel Zinc plated finish.
  • Keeper accomodates padlocks and trailer seals
  • Cross Reference: T #6972 280100
ME112-E

Miller Edge Black 2W Non Monitored End Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors and gates.
  • Retrofits easily to 1" to 1-1/4" sectional doors
  • Touch sensitive signaling allows for immediate stopping/reversing of motion
  • For sectional doors: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order
  • Lead wire: 22 gauge univversal
    • .......more details
Installation ManualWorksheetSell Sheet
.207_1-3/4"-RH

Torsion Spring .207 x 1-3/4" x 12ft RH Brown

  • Wire size: .207
  • Inside diameter: 1-3/4"
  • Length: 12 ft
RADIO-50

Manaras MCT-32 3-btn O/C/S transmitter 32 doors 313 MHz ** Replaced by RADIO-EM932

  • Open/Close/Stop remote for 32 doors.
  • By selecting A B C or D on the rotary switch and 1 to 8 on the other you can operate any of the 32 doors.
  • Comes with LED battery life indicator and 9V battery.
  • Can be wall or post mounted.
  • Must be used with 32 MCR series receivers.
Programming Instructions
ST18COP

Copper Stop 1/8" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL18COP
TC1

Tri-Code Transmitter 1-btn Visor - DISCONTINUED

  • 10 dipswitch format 3-position slide switch
  • Compatible with Multi-Code 300 & 310 MHz Delta3 & Stanley 310 MHz
  • Discontinued 7/1/13
375LMC Programming InstructionsInstructions de programmation pour 375LMC
RS1024

Roller 2" Steel 4" stem 10 ball

  • Steel Roller Wheel Diameter: 2"
  • Working Length: 3.5" Overall Length: 4.5"
  • Box qty: 150 Box weight: 53.3 lbs (2-4-10 steel)
Z9962

L5 Operator Mounting Bracket

  • Compatible with L5 Jackshaft operators
  • Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
  • Precise chain tension adjustments through the adjustment bolt
  • Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
  • Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
  • Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation
    • .......more details
BGARM

LiftMaster 10' Arm only for Techna Barrier Gate

  • For use on Techna gate operator
Installation Manual Manual d'installation
AIRSWITCH018

Exterior Air Switch SPDT ABS Housing

2500-1495

Linear Pushbutton Stop/Reset

2110-274

Linear Clutch Shaft Assembly HSLG UPS

041D8993

LiftMaster Cover Silver 8365W 83650-267

  • Replacement LiftMaster® Cover.
  • Compatible with various LiftMaster® 8365W Series WiFi® AC Chain Drive Garage Door Openers; powered by myQ
GHW-383-1HP-RH

Doorlec Industrial Gear Head Door Operator 1 HP 208V 3P with ECB and Nema4 modification

  • Extra heavy-duty industrial-type electric door operator for damp environments.
  • Worm gear reducer 40:1 ratio
  • #50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter (also called friction clutch)
  • Rotary type limit switches
    • .......more details
2110-236

Linear Shaft Output Assy HSLG Ups

178B45

LiftMaster Curved Door Arm (K10-10203)

  • Also known as: 1010203 105004 10-10203 K10-10203
  • For use with various LiftMaster® Medium Duty Commercial Door Operators
SB258100-PAIR

Garex End Bearing Plate Reinforced 2-5/8" - 1" Residential Sold as a Pair

TDC1222-14

Liftmaster Comm. 14FT Trolley Angle set (10-5814-P x 2) and #41 chain pack (TDC41-14) ***Actual length 203"***

  • Double Angle Rails for doors up to 14'6" high
  • Includes #41 chain pack
768-500

Fasteners Lag Screw Hex Regular Profile 5/16" x 3" 500/Pail

  • 7/16" head
  • Hex Regular Profile Head
50220

Doorlec Lifting J-Arm Assembly Trolley

OPJ-6114-M-N1

Manaras Heavy-Duty Jackshaft Op 1 HP 120V 1PH Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
185002

Marantec Maveo Bluefi Stick

  • The maveo bluefi stick brings Wi-Fi connectivity to your residential garage door openers via phone app or the Internet
  • Compatible only with: Synergy 200 and 300 series IP20 Bluetooth 4.2 also known as 187141 with manufacture date after March 2022.
  • NOTE: Operators manufactured before March 1 2022 require a control board upgrade in order to be compatible with Maveo products and UL 325 unattended operation. (available soon)
LEDSTRIP006

LED Light Strip (1 Unit) Red/Green/Blue 120" 24VDC

  • An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option
Installation Manual
CRBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
MR00001

Micanan Brake Disconnect Cable 3/32" x 12" Long

GDI-HB340

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft Non Monitored

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
OTBH-6233-1-M-N1

Manaras Trolley Operator 3/4 HP 208V 3 Ph Monitored w/N1 Photoeyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
OSH-6233-M-N1-RH

Manaras Opera-SH 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
P-831T

Pulsar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming instructions
GHX-383-1HP-LH

Doorlec Explosion Proof Gear Head 1 HP 208V 3PH ECB Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
RN0037-SS

Roller 3" Black Nylon 7" Stainless Steel Stem Precision Sealed Bearing 6203

  • A supreme precision sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 100 lb load 100000 cycles of a 12' door
  • Stem Length - 6.69" which does not include the shoulder Overall Length - 7.97"
RS-55

Roller Shutter Aluminum Model 55 Made to Order Pricing by Quote Only

  • The RS-55 is designed for use in large window roller shutters door recesses and small shopfronts.
  • Robust construction ensures high profiles rigidity while maintaining a well-shaped proportional appearance.
  • The RS-55 profile is available with or without perforation in a wide range of RAL-like colours.
  • The profiles have a very good colour fastness and high resistance to abrasion.
  • This profile is resistant to weathering.
  • Aluminium profiles are ecologically clean products.
    • .......more details
EHJX-311-1/2

Doorlec Industrial Jackshaft Op. Explosion Proof 1/2 HP 120V-1Ph

  • Explosion proof NEMA 7/9 Heavy-Duty Industrial Operator
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse.
  • Solenoid Brake prevents coasting and secures the door when closed
  • Explosion-proof (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
SPR50B18X1

Sprocket 50B18 1" shaft 1/4" KW

  • 18 tooth sprocket for #50 chain
GH-311-3/4

Doorlec Industrial Gearhead Door Operator 3/4 HP 115V 1-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
K13-32087

LiftMaster RPM Cup

  • SL595UL