Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
MH00013

Micanan Flange Bearing 3/4" ID x 1-3/8" OD

  • Pro-H requires 3 of these bearings
AC7

Felco C7 Cable Cutter 3/16" Capacity

  • Tool length: 8"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 7mm / 0.28in
    • .......more details
Data sheet
41C0279

LiftMaster Light Socket for Sec+ 2.0

  • New light socket designed to accept a broader range of compact fluorescent bulbs-CFL.
  • Compatible with LiftMaster garage door openers manufactured from 1993 to present.
  • New "insulated" design eliminates interference from CFL bulbs therefore better remote control range
MH00099

Micanan Bearing

  • Fits PRO-APT and PRO-HHD
  • Requires 2 per shaft
  • 3/4" Bore
ME00057

Micanan Clutch Shaft Only for PRO-APT 3/4" x 12-3/4"

  • For model PRO-APT
MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
ME00057-COMPLET

Micanan Clutch Shaft Complete for PRO-APT (SCLUTCHSHAFT) MX00213

  • For model PRO-APT
F539.90000

Bircher Infrared Programming Remote RC Duo 2 Red

  • Conveniently program all parameters from ground level
  • Backlighting of specific buttons provide instant confirmation of programmed parameter & value
  • Configure any Hercules 2 Hercules 2s Reflex 2 or UniScan sensor with the same remote
  • Multiple address feature allows programming of a single sensor even in close proximity to other sensors
  • Large highly visible buttons
  • Automatic off feature conserves battery life
    • .......more details
Programming InstructionsF539.90000 Sell Sheet
SHAFT023

Manaras Intermediate Shaft for MJ operator

CABLE_1/8SS-500

Cable 1/8" 7x19 500' Stainless Steel

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts
CABLE_316SS-500

Cable 3/16" 7x19 500' Stainless Steel

Comparison charts
50-104-1

Black Coil Cord 2-Wire 18-ga 20 ft. Extended Curly Cord

  • Retracted Length=4 Feet Extended Length=20 Feet 2 Wire 18 Gauge Cord Type SJEO
10-10355

LiftMaster Solenoid Link

82-PX10-28

LiftMaster Screw 10-32x28

86-CP05-108

LiftMaster Cotter Pin 5/32" x 1-1/2"

3AG1

Miniature Fast Acting Glass Fuse 1 Amp 250V (5/pkg) - 766120

TUBE_SHAFT_9FT

Hollow Shaft 1" x 9'-10" Galvanized 16 gauge

TUBE_SHAFT_18FT

Hollow Shaft 1" x 18'-10" Galvanized 14 gauge

TUBE_SHAFT_17FT

Hollow Shaft 1" x 17-0" Galvanized 16 gauge

02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red Part # XALD03H7

  • Open/Close/Stop allows complete control of the door.
  • Compatible with all commercial door operators.
  • NEMA 4 4X 12 13
  • Outdoor surface mount station with polycarbonate enclosure part # XALD03H7
Sell sheet
883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

  • Controls garage door operation and opener lights
  • Easy and fast programming
  • Compatible with Security+ 2.0 and MyQ remotes and accessories
Installation ManualManuel d'Installation
882LMW

LiftMaster Multi-Function Control Panel Wi-Fi

  • Push button for garage door operation
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Light run-time is 4 1/2 minutes with adjustable light timer option
  • Lock feature designed to prevent operation of the door from portable remote controls
  • Compatible only with LiftMaster® Security+2.0™ and Wi-Fi garage door openers
  • Equivalent to Chamberlain's 41A7185
    • .......more details
Programming instructionsInstructions de programmation
50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

  • Nema 4
  • 3-wire air switch; 1-NO and 1-NC contact
  • Mosley
  • NO contact on Yellow and Green
CPS-RPEN4

LiftMaster Monitored Retro-Reflective Photo Eye with Nema 4 Enclosure for Commercial Door Applications

Installation ManualManuel d'InstallationSell Sheet
BEARING005

Manaras Flange Bearing ID 5/8"

  • Flange bearing for 5/8" shaft
3-42-2A

Bottom Bracket with Removable Roller Carrier Commercial 3" 1-Hole BB-6 Pair *** To extent of inventory

  • Sold as a pair (1-left and 1-right)
  • 11-guage
  • Dimensions: 4-1/2" W x 11" H x 1-3/8" D
.234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.218-258-L

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.218-258-R

Cut-to-Length Torsion Spring .218 x 2-5/8" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
C-200-INSTALLED

Cones 2" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF200
.295-2-L

Cut-to-Length Torsion Spring .295 x 2" Left Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-R

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

  • Two-position keyswitch. Key removable in either position.
  • Surface Mount
  • May be used on all operators
  • Die-cast metal enclosure non-tamperproof
109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

  • Operates on 12-24 volts AC or DC power
  • One channel
  • Whip antenna
  • 3-foot antenna coax and bulkhead connector
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)
    • .......more details
Programming Instructions
12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

109020

Linear 1-Channel Multi-Code Receiver 300 MHz

  • Three tabs for universal mounting
  • One "NO" relay
  • Compatible with 10 dip- swith 300 MHz Multi-code transmitters
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
PD86CNP12QPMU

Carlo Gavazzi Photoelectric Switch Retro Reflective 12-24V AC/DC

  • Reflector (ER4) not included
Installation Manual
C-134-INSTALLED

Cones 1-3/4" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF175
02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

  • Swivel end
  • Nema 1
  • Same as Pull Cord
PS31L-NS11R1M00

Carlo Gavazzi Utility Switch

  • Switch DPST-NO/NC Chassis Mount
  • Actuator Type: Side Rotary Adjustable Roller
  • Termination Style: Screw Terminal
  • Ingress Protection: IP66 - Dust Tight Water Resistant
  • Switch Function: On-Mom Off-Mom
  • Current Rating (Amps): 5.5A (AC) 2.8A (DC)
    • .......more details
Installation Manual
.273-134-R

Cut-to-Length Torsion Spring .273 x 1-3/4" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-134-L

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.243-134-L

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.234-134-R

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.234-134-L

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-L

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.207-134-L

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.218-134-L

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
CPS-N4

LiftMaster Nema 4 Commercial Protector System Photo-Eyes with Interface box

  • Commercial Through Beam Photo Eyes includes:
  • 50-15514 I/R Emmitter
  • 50-15515 I/R Detector
  • 77-16011 Hardware Kit N4-CPS
  • 001C4629 CPI Housing Assembly
  • Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
    • .......more details
Installation ManualManuel d'installation
MOUNTSHAFT018

Manaras Limit Shaft Kit Opera

Drawing
MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

  • Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011
108135.0004

Overhead Serpentine V- Belt for JST 31"

  • Overhead Door commercial garage door opener serpentine belt 108135-0004
  • Type "J" 31"
107999.0001.S

Genie Motor Pulley for Overhead JST

G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation
855LM

LiftMaster HomeLink Repeater Kit

  • This kit contains a repeater and a transmitter
  • The HomeLink repeater is only compatible with HomeLink equipped vehicles
Programming Instructions
387LMC

LiftMaster Universal Wireless Keyless Entry

  • Universal Keyless Entry works with garage doors made by LiftMaster Genie Stanley Overhead Door Wayne-Dalton Craftsman Chamberlain and Linear/Moor-o-Matic.
  • Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
  • Wireless – powered by one 9V battery (included)
  • Weatherproof slide-up protective cover
  • Open or close the garage door without using a remote
  • Backlit keypad
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
RELAY022

Manaras Socket Base for TIMER031

  • 8 pin base
C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF258
21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

  • 120/208/240/480V PRIMARY 24V SECONDARY
.283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
PHOTO-061

Manaras Monitored Photoelectric Cells N4X (Fraba)

  • Monitored NEMA 4X enclosure through-beam type photocell
  • 4-Wire
  • Suited for industrial environments
  • Range: 45 ft
  • Supplied with 3ft of wire
Installation Manual
CB14B0500

Cable 1/4" 7x19 500' Galvanized

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
L0172-092

Low Temperature Grease 10oz Tube

  • Lubriplate multi-purpose low temperature grease.
  • Excellent cold operating characteristics
ER100

Carlo Gavazzi Reflector 4" (100mm) Square

  • High quality reflector for retro-reflective photoelectric switches
  • Dimensions: 100 mm x 100 mm 9.2 mm thick
PMP12RI

Carlo Gavazzi Polarized Retro-Reflective Sensor

  • Range: 40 feet (12m)
  • Modulated invisible light polarized
  • LED- indication for target detected
  • NO and NC output
  • Suitable for exterior applications and harsh environments
  • Multi supply voltage: 12 to 240VDC and 24 to 240VAC 50/60Hz
    • .......more details
Installation Manual
ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
ER4

Carlo Gavazzi Reflector 3-1/4" (84mm) Round

  • Can be used with the PMP12RI retro-reflective detector
  • Can be used with the reflector hood
  • Dimensions: 84 mm wide 7.4 mm thick
8010-3FT

Bottom Sweep for Entrance Door White ** No Longer Available

  • Height adjustable
  • Vinyl: White
  • Length: 3 ft
2807.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Curbside

  • Replacement torsion spring with cones for Whiting Door Serial # 138631
  • Specs: .139 x 2-3/16" x 14" Long
  • Curbside
  • For Roadside order part #2806.139*140
2806.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Roadside

  • Replacement torsion spring with cones for Whiting Door Serial # 138631
  • Specs: .139 x 2-3/16" x 14" Long
  • Roadside
  • For Curbside order part # 2807.139.140
14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

  • I-Beam Chain Drive Rail for model 3595
1091303602

Overhead 2-btn Transmitter 360 MHz model: 111663-3602

  • OVERHEAD DOOR remote control transmitter 109130-3602 works with 9 dip switch on 360 frequency.
  • Part number has changed to 111663-3602
Programming Instructions
10FT-RAIL-CHAIN

LiftMaster 10' chain drive rail 1710LMC - colour code: Red

  • #48 chain size
  • Price reflects cost if purchased with an opener
7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

  • I-Beam Chain Drive Rail for model 3595
7FT-RAIL-CHAIN

LiftMaster 7' chain drive rail 1707LMC - colour code: Green

  • #48 chain size
  • Price reflects cost if purchased with an opener
77810.0001

Overhead Door Box Assembly Cushion (#111389.0001.S) ** Price by quote only

  • Garage door operator bracket for older Overhead Door residential models (Automate 70 Touch n Go R-80 100 100SS 1000) and commercial garage door openers.
111010.0001

Overhead Door Serpentine VBelt 27" (6EPJ683)

  • Serpentine belt 27" long
  • Fits Genie GCL-T Trolley operator
  • Some Overhead drawbar models: JST RSX RMX
41D794

LiftMaster Replacement Motor with Positioning Sensor

  • Electric motor for model 3850
Installation ManualManuel d'Installation
CPS

LiftMaster Commercial Protector System Eyes

  • Universal commercial photo-eye kit for indoor use
  • Interface box allows CPS to work with all operators
  • 24 volt AC/DC supply voltage
  • Mounting hardware included
  • Sensing distance of 30 feet
  • Receiving Eye - A: 001D6857-1 Sending Eye - A: 001D6857-2
    • .......more details
Installation Manual
CPS-U

LiftMaster Commercial Protector System Eyes

  • For LiftMaster Logic 2 3 4 & 5 commercial operators only
  • NOT for outdoor applications
  • Allows activation of the timer-to-close
  • Mounting hardware included
  • Sensing distance of 30 feet
  • CDO 2010 Ready
    • .......more details
Installation ManualManuel d'InstallationSell Sheet
45ACT

LiftMaster Circuit Board

  • Board: Tri-band Security+ 2.0
  • AC Belt and Chain Drive models
  • Fits models LC500EVC HD420EVC PD622EVC
  • Same as 41D7675 1D7675 7675 45ACBL1 45ACBL2 45ACBL3 45ACBL4 45ACBL5 45ACCL1 45ACCL2 45ACCL3 45ACCL4 45ACCL5 45ACBR1 45ACBR2 45ACBR3 45ACBR4 45ACBR5 45ACCR1 45ACCR2 45ACCR3 45ACCR4 45ACCR5 045ACT 041D7675
41A5021-1ATS

LiftMaster Circuit Board Assembly (41A5021-1HATS)

  • Board: Security+ 390 MHz
  • Assembly includes: circuit board and end panel
  • Also includes: 1 Multi-Function wall ctrl panel - 2 wire
  • For: ATS211 & ATS211R
  • For newer model ATS use replacement board 41A5021-9G-315
  • Same as 041A5021-1HATS
    • .......more details
41A5021-9G-315

LiftMaster Circuit Board Assembly

  • Board: Security+ 315 MHz
  • Aeesmbly includes: circuit board and end panel
  • Also includes 1 Multi-Function wall ctrl panel - 2 wire
  • For ATS2113X model
  • For older ATS operators use replacement board 41A5021-1ATS
21-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Black

  • 2 strand 22 gauge tin dipped copper hook-up wire
  • Color coded White & White/black wires
20-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Red

  • 2 strand 22 gauge tin-dipped copper hook-up wire
  • Color coded White & White/Red wires
K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual
485LMC

LiftMaster Battery for Integrated BBU Units

  • For use in Liftmaster 8550 8500W 3850 and 8360 models
  • 12V 4.5 AMP
  • Same as Part # 41A6357-1 41A5948
  • Battery back-up good for 20 cycles
Installation ManualManuel d'Installation
7001-14-W/B

Commercial Side & Top Weather-Strip 14' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

  • Price reflects cost if purchased with an opener
STAR1000

LiftMaster Commercial Access Control Receiver Security+ 2.0

  • Security+ 2.0™ technology provides 2X the range of standard remote controls
  • Compatible with HomeLink Wireless Control System
  • 1000 remote capacity to support large quantity remote control requirements
  • Single and block addition
  • Supports suspending and unsuspending of remote controls to withhold and reinstate access
  • Designed for outdoor environments
    • .......more details
Programming InstructionsInstructions de programmationSell SheetBrochure
TC2

Tri-Code Transmitter 2-btn Visor - DISCONTINUED

  • Tri-Code series 2 channel transmitter model TC-2
  • 300 & 310 MHz simultaneously
  • Each channel can be set on a seperate code format
  • Works with both 8 and 10 dip switch systems
  • Replacement: 380UT