Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MGJ-5011U-LH

LiftMaster Medium-Duty Logic Gear-Reduced Op. 1/2 HP 115V 1Ph Left Hand

MGJ is designed for use on rolling grilles and shutters.
Maximum recommended duty cycle: 12 cycles per hour.
Heavy-duty wormgear-in-oil-bath speed reducer
3-button station for open/close/stop functionality
315 MHz radio receiver is integral to the Medium-Duty Logic board
UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4 or a 4-wire monitored edge using the CPS-EI interface)

.......more details

Installation manual Sell sheet

MGJ-5011U-RH

LiftMaster Medium-Duty Logic Gear-Reduced Op. 1/2 HP 115V 1Ph Right Hand

MGJ is designed for use on rolling grilles and shutters.
Maximum recommended duty cycle: 12 cycles per hour.
Heavy-duty wormgear-in-oil-bath speed reducer
3-button station for open/close/stop functionality
315 MHz radio receiver is integral to the Medium-Duty Logic board
UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4 or a 4-wire monitored edge using the CPS-EI interface)

.......more details

Installation manual Sell sheet

.283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

MU22-CUSTOM

Miller Edge MU22 Custom Made Edge

Edge made to customer's exact specifications

Worksheet Installation manual Sell sheet

50-HERK-RC2

Hercules Infrared Programming Remote Red (50-HERK-RC2)

Conveniently choose from 8 different preset comfort functions to adjust detection fields mounting heights relay hold interval cross traffic optimization direction recognition people/vehicle separation slow motion detection turn on/off filter functions open the door manually and much more
Bidirectional
Fine-tune the motion detector from the ground without guessing if all the settings have been received by the sensor

MV-00245

Allen Bradley Thru-Beam Photocell 42GRL Rec/Trans 110V 0-30ft Range

42GRL 9000 and 42GRR 9002 transmitter 110V/receiver (24/115V) set

.375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

PRO-HB-5011U-LH

Micanan 1/2HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

TRACK-2"-RAW-10

Raw Vertical Track 2" 10'-0" Sold per Piece

111" long 10'-0"

MP00054

Micanan Track and #410 (#48) Chain for 8' h Door *Actual length 126"*

For 1/3 & 1/2 HP Micanan trolley operators

PRO-TB-7583-U

Micanan 3/4HP 208V 3 P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: nominal 30msec.

.......more details

PRO-H-5011R-LH

Micanan 1/2HP 115V 1P Hoist Operator Contactor Model Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Solenoid brake OPTIONAL

Installation manual Specification sheet

SEF2410

Erone Ultra Flat Infrared Photocell 10M (33ft)

Fixed orientation 1 sender and 1 receiver
Range 10M (33ft) in all conditions
Adjustable Sensitivity
1 "NO" and "NC" contact
Power supply 12/24 Vac/dc
Will work with all commercial operators

.......more details

Wireless System Chart

26140

Doorlec Cam Shaft Threaded 5/8" x 10-3/4"-24

This limit shaft will work on all Side-Mount Doorlec Openers
Cam shaft 5/8" (1.59 cm) - 24 x 10 3/4" (9.5 cm) fine thread

MA024RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 12 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe

Additional arm accessories

D-2-8

Keyed Disconnect Device 8ft Cable

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

COAX-RG6-ASBLY

Coax Cable Assembly Sold per Foot

Assembly includes union

25-60007

Truck Door W-Style End Hinge Pin Package Set 50/Pkg

Pin packaged set consists of 50 x 1/4" pins only
Steel construction Zinc plated

1104-9FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Green (R)

Green rigid vinyl retainer with green flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

Highly configurable barrier designed for many applications and environments
Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
Barrier equipped with control unit allowing operation perfectly adapted to every situation
Change of configuration or operation possible even after initial installation of the product

Bilingual parts catalogue Technical manual

RESET008

Manaras Resettable Overload Fuse 11A 1 Phase

108D36

LiftMaster Light Lens (K108D0036-2)

Compatible with one light operators
Compatible with the following Liftmaster models: 1040 1045 1055 100WD 200WD 1140 1145 1155 110WD 210WD3 1240 1245 1255 215WD 15WD 1240R 1245R 1255R 985 1046 1146 1246 1246R 1056 1156 1256 and 1256R
Compatible with the following Chamberlain models: 2000 2100 and 2200
Dimensions are 7-1/4" wide X 4-3/4" high X 3" deep

PBT-3

Exterior 3-Btn O/C/S Control Station Nema 4 Metal Enclosure

Surface mount
Metal enclosure
Not CSA approved
Dimensions: 6" H x 2-3/4" W x 3-1/2" D

JDMG-LG-BBU

GDI Battery Backup Option G3243

Battery Backup option for JDMG-LG operator

OCS-PANEL

GDI Panel Buttons Open/Close/Stop N1/ N4 G3253

Power LED

JDMG-LG-A030

GDI Jackshaft 24VDC Nema 4

Brushless DC high reliability high efficiency and low maintenance motor
No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
Soft start soft stop
Includes cycle counter timer-to-close 10ft motor wire harness
Battery backup optional (sold separately)

Sell sheet Technical document

M-18

Molded Rubber Bumper Black 18" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
4-1/2" depth
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.

.......more details

CP-MO-34-575/3

Lynx Electric Motor 3/4 HP 575V

Electric motor only

8355W

LiftMaster Premium 1/2HP AC Belt Drive Wi-Fi

Free MyQ® Mobile App so users know their home is secure.
Built-In Wi-Fi® for the easiest way to connect the garage.
Real-Time Alerts indicate the status of the garage door via email or push notifications.
Monitors and Controls the opener from anywhere using mobile devices.
Belt Drive system for quiet maintenance-free performance.
Motor Vibration Isolation System (MVIS®) provides quiet reliable operation.

.......more details

Installation manual Sell sheet Brochure Receiver Logic Board Conversion List

GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

1058050002

Overhead Limit Cam Snap On for OHD Chain Model

For Overhead models #456 #551 #556 and the #65 series
Also called Limit Actuator
105805-0002

R5221

Sheave Strap 4"

Sheave strap also known as fork only

K75-34824

LiftMaster Chain Guard Kit for SL575GL SL585GL SL585U slide gate operators

Complete with: Chain Guard Chain Guides and Retainers.
Works with SL575GL SL858GL and SL585U

02-409

LiftMaster Key Switch 2-Position Nema 4/12

Two Position Key Control Station
Outdoor Surface Mt. (NEMA 4/12)
Tamperproof
Die cast metal enclosure with standard key cylinder
OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
Dimiensions: 3" x 3.2" x 4.2"

.......more details

7001-12-CHARCOL

Commercial Side & Top Weather-Strip 12' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

7001-14-CHARCOL

Commercial Side & Top Weather-Strip 14' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

MK00552

Micanan Capacitor for 233-284 MFD with Resistor ** Replaced by MK00542

SPRING-FILLER

Spring Filler for 5-1/4" and 6" Torsion Springs Sold with Pre-Cut Springs only Sold per Inch

Required when ordering pre-cut torsion assemblies with cones

5001-WG-10-MOAK

Residential Side & Top Weather-Strip 10' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

SF514U

Spring Fitting 5-1/4" Pair for 1" shaft

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.

201-300-401-00

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz Pre-2016

Open/Close/Stop remote for 8 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Old generation- prior to 2016

Programming Instructions Instructions de programmation

21-7460-1

LiftMaster Transformer 230/460V 3 PH

15-50B12LGH

Sprocket 12 Teeth 1" Bore 1/4" Keyway

Same as 50B12x1

27-20010

Truck Door Dual-Spring Shaft 96" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

28002

Doorlec Flange Bearing F-360-13 5/8" (1.59cm) Hole

Fits model LJH/W

CB116A0500

Cable 1/16" 7x7 500' Galvanized

Galvanized cable 1/16" 7x7 500ft spool.

PRO-HBH-7521U-R

Micanan 3/4HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

3/4 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

85870WL

LiftMaster Elite Series 3/4HP AC Chain Drive Wi-Fi Lock Garage Door Opener **discontinued** replaced by 4690L

MyQ® Technology now with Wi-Fi enables secure monitoring and control of your garage door opener with a smartphone tablet or laptop.
P3™ Motors provide proven reliability and durability.
¾ HP AC Motor Chain Drive System is built to provide maximum power to lift the heaviest doors including carriage house and solid wood.
I-Beam Rail System and reinforced chassis with chain drive provides maximum support.
Security+ 2.0® safeguards garage access – with every click a new code is sent to the garage door opener ensuring the door does not inadvertently open.
Timer-to-Close automatically closes the door after a pre-programmed number of minutes.

.......more details

Receiver Logic Board Conversion List Comparison Chart

GAREX-SPEC-ORDR

Garex Light Commercial Door Special Order

specify size color details when ordering
Please call for pricing

XT2563-00-W

Xcluder Rodent Block 3" Black 75' Reel

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

1003-3-DF-CUT

Bottom U-Rubber 3" Dual Fin Black Sold per Foot

Sold in cut-lengths per foot.
Dual fin

V3564-00-W-200

Vinyl Seal 4" Bottom Bead End Grey 200' Spool

Bead diameter 3/16" - 7/32" +/- tolerance

ME123-M-BLK-END

Miller Edge Black End 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

ME123-M-YEL-RH

Miller Edge Yellow RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

MCT-1

Linear 1-btn MegaCode Visor Transmitter 318 MHz ** To Extent of Inventory

Activates one 318MHz MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery incl.
Codes: 1000000+ (MegaCode format)
Dimensions: 2.16" W x 3.75" H x .95" D

.......more details

1003-4-DF-200FT

Bottom U-Rubber 4" Dual Fin Black 200' Long

200ft spool of vinyl insert.
Dual fin

Q248

LiftMaster Gear Reducer 40:1 HCT Post 2/99 (K32-50251)

Same as K32-50251

PPLX

LiftMaster Stand Alone Proximity Reader *** No Longer Available

6" read range
50000 user capacity
Multiple Wiegand protocol (Sentex® 26-bit industry standard PassportTM)
Programmable as stand-alone or Wiegand pass-through
Simple-to-use handheld radio programmer (model PPRP; sold separately)
Programmable output relay (NO/NC)

.......more details

Programming instructions Sell sheet

7272105

FAAC 400 Cover

PHOTO-062

Manaras Monitored Photoelectric Cells N1 Thru-Beam 20' Range ** No Longer Available use PHOTO-070

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 20 ft

CABLE_316SS5000

Cable 3/16" 7x19 5000' Stainless Steel ** Price on request

Comparison charts

MD00044

Micanan Spur Gear 12B60

053156

Magnetic Mount Micro Dome Beacon Amber ** To Extent of Inventory

60 LEDs 360 degree revolving flash / intermittent flash
-30 degree celsius to + 50 degree celsius extreme temperature reliability

102079

Flangette Retainer football style 2 pieces 2 hole PFL6Z PFL206

2 required per bearing # 101475
works with: 1-1/4" bore sealed insert bearing part # SB206-20

CONTACTOR003

Manaras Repl. Kit Reversing Contactor Allen Bradley 16A-24VAC

Drawing

MX00140-NEW

Micanan Brake Assembly for PRO-TB/APTB NO Solenoid - New Model (SBR-N1-00-TTBPAPT)

MOTOR403

Manaras Electric Motor 1/2HP 120V 1PH

Instant reverse
Medium-duty 1500 rpm
For OMJ/OMH

NIR-50

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5250-2)

Extended range for better performance in rain and snow
Compact design mounting hardware and indicators make it easy to install
Lower current draw of only 28mA makes it an excellent choice for solar and low voltage applications
Watertight package and optional protective hood offers protection for the NIR-50 from the elements and vandalism
Flexible voltage 12 – 240 Volts DC 24 – 240 Volts AC
Watertight package for reliable outdoor installation

.......more details

.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

MK-00511

Micanan Resistor 330 OHM 5Wc/w Leads (For Motor)

ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

ME111-L

Miller Edge Black Left Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

1005-1-1/2-10'

Aluminum Bottom Retainer U-Shaped 10' Long

For door thickness 1-1/2"

DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

Standard features include: 2-cable balancer with independent springs
Balancer springs treated with rust preventative
All door hardware is E-coated
Spring loaded lock catch
Heavy-duty 2" 13-gauge track
Stainless steel aircraft cables

.......more details

CP-LX100

Lynx Control Board with Cover for UL325 models

For all voltages

Programming instructions

MX00145

Micanan Brake Assembly for PRO-APT Solenoid NOT included ** DISC

Discontinued. Use part number MX00140

MI00003

Micanan Pocket Wheel for PRO-H/HB/LH

Comes with 3/4" bushing and 2 1/4" spring pins

CABLE-NR-14-CC

Cable No Roll 1/4" 19x7 Non-Galvanized C-Coated 500ft

19X7 rotation-resistant wire rope.

R5995

Shaft Collar 1-1/4" Double Split

R5996

Shaft Collar 1" Split Black Oxide

CP-LX225

Lynx Enhanced Relay Board

CP-SH-58-1038

Lynx Complete Limit Shaft Assembly for MCJH

5/8" x 10-3/8"
Same kit used for HDC except the HDC has 1 extra 5/8" space washer

SPF514-6

Spring Filler 12 ft Long No Fins

For use with 5-1/4" or 6" torsion springs
Accomodates both 1" and 1-1/4" shaft size

BG790-50-11-HTC

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 115V w/Arm Weight & Heater and TTC

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
Standard Features: Control inputs and Adjustable limit settings
02-102 Open/Close Push Button Included

Installation Manual Sell Sheet

1007-1-5/8-12

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

For door thickness of 1-5/8" to 1-3/4"

UNI-100-142

Uni-Size Bottom Weather Seal 14'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

DXR-701

Linear 1-Channel Digital Receiver 315 MHz

A digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters.
When the receiver detects a signal from a transmitter programmed into its memory the relay output activates.
The relay has four optional output configurations.
32 transmitter capacity
RF activity indicator
Quick-learn programming

.......more details

Installation Manual