Kit Includes: LA400DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA400DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016
The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for
110 to 240 V 1 PH and 60 Hz power supply.
Comes with integral absolute encoder to control the door travel
24 V 5 amps back-up battery pack and 3/8†ratchet socket to
accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
Dimensions: Back Room: door height + 4'5" (1350 mm)
Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel
Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Comes equipped with a built-in 130 degree wide angle camera that features streaming video recording capabilities and two-way communication to the myQ app
Integrated Dual LED Lighting System Ultra-Quiet Belt Drive®
Motor: 12V DC 53 RPM automatic thermal protection
Power: 120V AC 60 Hz voltage 6A current rating
UL Listed 4' power cord (3-prong)
Speed: 7.2" per second upward 7.2" per second downward
R16 Insulation - Overlay moldings positioned to create the Tilly design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
€¢Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates.
•3-sided activation allows for immediate stopping or reversing of motion
•Contours to round or square posts.
•Temperature range: -30F to 155F
•Lead wire: 18 gauge 2ft length
•Sensitivity: nominal 6-8 PSI
•2 wrie NO configuration
•ANSI/UL325 recognized component
•Cannot be bent
•One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)
Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
€¢Electromechanical small profile edge for rolling steel foor applicaton.
•Touch sensitive signaling allows for immediate stopping or reversing of motion.
•The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip.
•Lead wire: 22 gauge universal
•Sensitivity: nominal 6-8 PSI
•2 wire NO configuration
•Horizontal mount
•ANSI/UL325 recognized component
•One year warranty
€¢Electromechanical small profile edge for rolling steel foor applicaton.
•Touch sensitive signaling allows for immediate stopping or reversing of motion.
•The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip.
•Lead wire: 22 gauge universal
•Sensitivity: nominal 6-8 PSI
•2 wire NO configuration
•Horizontal mount
•ANSI/UL325 recognized component
•One year warranty