Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K75-34791

LiftMaster Clutch Kit for SL585

  • Kit includes: Clutch disk Clutch plate Torque Limiter Hub Sprocket Washer E-Rings Nut Bearings and Compression spring
BELT-GEAR

Skylink Belt Gear for EQ Operators 210131 ***NLA

  • New model # 210131 no cover is needed
  • Metal Gear
TILT-5

Tilt Detector

  • State of the art technology senses as little as a 5 degree tilt in the motion of electrically operated doors and will automatically stop the motor
  • Safeguards against rolling steel door failure where conventional devices miss
  • Automatically stops the operator to keep door within safe parameters
Sell sheet
1104-7FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 7' Long - Light Bronze (F)

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
K72-12507

LiftMaster Clutch Shaft Kit (3/4 & 1HP)

  • Clutch Shaft Kit 3/4 & 1 HP Trolley operators
  • Complete with: Clutch Plate Clutch Shaft Bearing 3/4' I.D. Sprocket 41B10x3/4' 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
Installation manual
HTRNB

LiftMaster Heater Kit for AC Pad Mount Gate Operators

  • Heater kit for pad mount AC gate operators.
  • Battery bracket NOT included.
  • Protects system to -40° F and installs on operator frame
  • Measurements: 6 x 2 3/8 x 3 3/8
SA1906/031

AS1320 Logic with Top Cover Assembly BL3X SAV

TBKL-14X4

Turnbuckle Loop Ends 1/4 x 4" 500 lbs

  • Hot dipped galvanized drop forged with lock ends
  • Eye & Eye ends
  • Work Load Limit : 500 LBS
L-4-18-0-M

Cable Tie Standard 18 LB Black 4" Nylon 1000/pkg

  • Length: 4.12" / Width: .095" / Thickness: .042" / Diameter: .875"
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
201-300-411-00

Equinoxe Long Range Transmitter O/C/S for 16-Doors 433 MHz Pre-2016

  • Open/Close/Stop remote for 16 doors
  • Range of approx. 1000ft
  • A heavy-duty remote for Industrial applications
  • Old generation - prior to 2016
Programming InstructionsInstructions de programmation
ACT-34D

Linear 4-Channel Block Coded MegaCode Key Ring Trans Prox Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Built-in 26-bit Wiegand proximity tag
  • Eliminates need for separate proximity card or tags and transmitter
  • Supplied with quick-disconnect key ring
  • Same facility and ID codes for transmitter and proximity tag
  • Sold in lots of 10
    • .......more details
21-7460-1

LiftMaster Transformer 230/460V 3 PH

41D0843

LiftMaster Replacement Motor and Sensor 12VDC

  • For Craftsman garage door opener
RSH-6114-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 120V With Elect. Board N4X Thru Beam Eyes Right Hand

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
Installation manualSell sheet
.362-278-27-LHW

Cut-to-Length Torsion Spring .362 x 2-7/8 x 27" Left Hand Wound

  • No cones
  • Inside diameter 2-7/8" or 2.875
CH900

Contact Cleaner 340g

  • Powerfull multi purpose contact cleaner and degreaser
  • Able to penetrate difficult to reach areas.
  • Cleans carbon deposits.
  • Removes dirt grease and other contaminants.
  • Safe on most painted and plated surfaces.
  • Suitable for contacts drivesmotors controls breakers switches telephones etc.
    • .......more details
Safety data sheetFiche de données de sécurité
PS324

Nice Battery Backup

  • Kit of 24 V batteries complete with battery charger for powering automations for automatic gates and doors in the event of a mains power failure
  • Ambient Operating Temperature: from - 20 to + 55°C (battery efficiency is reduced in proportion to a decrease in temperature at -10°C efficiency is 30%; the battery lifetime decreases on an increase in temperature; at 40°C lifetime may be reduced to 2 years)
1224-2-WHITE

Elton Commercial Window for Flush Doors 2" thick 1224 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
65-52091-16

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

  • For 3/4 Hp & 1 Hp Trolley operators
  • Includes floor level brake release cable 1" x 12' round bar.
OSH-6112-CONT-L

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation manualSell sheet
37030A

Genie Motor Assembly DC

  • Works with Genie ReliaG 800 2022 2024 and 2042
  • Replacement powerhead motor assembly
K74-18382

LiftMaster Hall Effect Sensor Assembly **to extent of inventory

  • Formerly 76-G0541 G76G0541
  • For SW470 with GL or S3 Board SW490 with GL Board
50DCTWF

LiftMaster Receiver Logic Board DC. WiFi *** To extent of Inventory

  • Board: Tri-band Security+ 2.0l
  • Fits: 8550W
  • 001D8363
  • Same as 50DCBL5 001D8363 041D8169 1D8169‑2 001D8214 1D8169‑1 1D8169 1D8363
IRB-MON

EMX Industries Nema 4 Through-Beam Photocells with Gold Hoods New UL325-2018 *** No Longer Available

  • Type B1 non-contact sensor
  • UL325-2018 compliant
  • Lens-less design
  • Simple 2-wire connection
  • Relay contacts available
  • NEMA 4X enclosure
    • .......more details
Installation ManualSell Sheet
ETM17-24V

EMX Digital Timer *** No Longer Available

  • The ETM-17 series are panel mount digital timers the can be operated in 12V dc or 24V ac/dc power supply ranges depending on model ordered.
  • The output is a form “C” relay capable of 16A@ 30VDC.
  • Internal battery for memory backup of programming in the event of power failure.
  • Designed with 17 ON/OFF events per day and 15 combinations of daily programs for the best flexibility to the user.
  • Manual or Auto mode
MOTOR403

Manaras Electric Motor 1/2HP 120V 1PH

  • Instant reverse
  • Medium-duty 1500 rpm
  • For OMJ/OMH
ST-ENDCAP

Soft Touch End Caps Sold Individually

109441.0002

Overhead Complete Limit Switch Assembly JST

  • Replaces part number 109441.0001
  • Replacement has 3 limit switches
VBELT_5L340

VBelt 5L 34"

  • Fits Lynx HDC operator
BMBOX-HARDWARE

Complete Hardware Box for Big-Metro BMBOX

  • Foundation box for Big-Metro gate operator
  • Kit includes: (1) #60 – PMD1025.4610 – MECHANICAL STOP BOLT NUT (1) #62 – V12X30.5102 – BOLT MECHANICAL STOP (1) #63 – D12B/5110 – NUT MECHANICAL STOP (1) #61 – D18.5110 – NUT M18 (1) #52 - 5PMCS1.4630 – BALL BEARING (1) #58 – PPD2288.4540 – NYLON HINGE COVER (2) #65 – 16X1.5124 – SCREW FOR LID COVER (4) #64 – D.12.5110 – NUT M12 LOCK NYLON
RA-AD-WKP-10

Lynx 10-btn Wireless Keypad AD455 372 MHz

Compatibility chart
CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

  • Service kit to connect new LED arm to existing barrier gate
  • Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply
.306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

  • Standard features include: 2-cable balancer with independent springs
  • Balancer springs treated with rust preventative
  • All door hardware is E-coated
  • Spring loaded lock catch
  • Heavy-duty 2" 13-gauge track
  • Stainless steel aircraft cables
    • .......more details
BOARD070MR

Manaras Replacement Control Board (Monitoring)

  • On-board 390MHz radio receiver accepts 50 remote controls
Replacement ChartGuide de remplacement
420001

Linear Wireless Keypad Multi-Code 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • 4-digit access code
  • Backlit keys
  • Weather-resistant keyless entry station transmitter
  • Easy access to battery
  • Power: 9-volt battery
    • .......more details
OTH-6112-ECB

Manaras Trolley Operator 1/2HP 120V 1Ph with Electronic Circuit Board

  • The OTH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
R5996

Shaft Collar 1" Split

.250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
SPF514-6

Spring Filler 12 ft Long No Fins

  • For use with 5-1/4" or 6" torsion springs
  • Accomodates both 1" and 1-1/4" shaft size
D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
1007-1-5/8-10

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 10'1"

  • For door thickness of 1-5/8" to 1-3/4"
1013-1-1/4-8

Rigid Vinyl Bottom Retainer L-Shaped 8' Long

  • For door thickness: 1-1/4"
EL2000SS

LiftMaster Telephone Entry Access Control System Stainless Steel ***NLA

  • A high-capacity telephone entry access control system designed to complement virtually any gated community.
  • It is flexible enough to be used in apartment buildings condo complexes office parks and commercial sites.
  • features a 5-inch backlit LCD screen and clearly displays up to 4 lines with 20 characters per line making it a great choice for multi-tenant installations
  • Entry Codes allow for 2000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes 1000 card codes 500 entry codes for example •Transaction Monitoring stores a maximum of 8000 transactions including date time identification and transaction type.
  • Activity Reporting gives property managers the ability to print database system and history reports.
  • Call Forwarding and Do Not Disturb schedules can be programmed for every resident.
    • .......more details
Installation ManualProgramming InstructionsInstructions de programmationSell Sheet
3BLM-BC

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose and Best Cylinder

  • Open-Close-Stop
  • Dimensions: 7" h x 2-3/4" w x 3-1/2" d
  • Exterior surface mount
3BLM-BC
UCP207-20

Precision Pillow Block Bearing 1-1/4" Bore

  • 6-9/16" overall length
  • 5" hole center to center distance
PB-BE101BP

Contact Block N/O Contact

  • Base mount
  • For use with RC P enclosures. IP65
MK-00098

Micanan Boot for Cut-Out Switch

29-ABC-15

LiftMaster Fuse 15A

  • For VSL595 gate operator
T012

Manaras Trolley Track 12ft for 1/2HP models *Actual length 174"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
HSC-1000

Hand Swager 1/4" & 5/16"

  • Swages 1/4" and 5/16"
  • Made in Japan
BSG115-LED

Devanco Stop and Go Light Black Housing 115V LED

  • LED Traffic Light Red/Green Dock Light
  • Weather-proof 2 piece housing with highest available UV rating
  • Ultra bright LED's for easy viewing in direct sunlight
  • Lenses measure nearly 4" in diameter
  • Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
  • Made in Canada
    • .......more details
Installation InstructionsInstructions d'installationSell Sheet
26-40045

Truck Door Offset Bottom Seal 98" Long for Whiting Dryfreight Doors

  • Co-extruded using rigid PVC backing with flexible PVC seal.
  • To be used with the offset U-channel retainer only (26-40037 or 26-40039)
26-40029

Truck Door U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors ** To Extent of Inventory

  • Aluminum extrusion construction
  • For use with Bottom Seal #26-40027
RELAY024

Manaras Relay DPDT 24VAC

  • Used in all heavy-duty operators as well as MLT and Opera-MH/MJ
DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

  • Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
  • Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.
    • .......more details
Installation Manual
29200

Doorlec Transformer 208V pr 120V sec 35VA

  • 208V prImary 120V secondary 35VA
MO00001

Micanan Cam Plate Compression Spring (.178 ID)

  • 2 required per operator
  • .178 ID x 032G x 55L)
MH00001

Micanan Bronze T-Bushing 3/8" ID

  • 2 required per operator
MT-UHF-0-0

AWID Long Range Metal Mount Tag

  • For use with LR-2000 and LR-3000 readers
  • Operating temperatures from -58°F to 185°F (-50°C to +85°C)
  • Reading Distance up to 25 feet
  • Battery not needed passive tag
  • Passive RFID technology with excellent-price-to-performance ratio
  • Proprietary encryption for protection of card data
    • .......more details
MK-00004

Micanan Travel Limit Switch

10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

  • Transmitter offering means of activation of automatic doors with extended hold feature.
  • Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
  • Operating temperature: -10 to 55C
  • Controls one 10RD433 receiver.
EP2986

Exhaust Port 5" non latching long barrel

  • 5" inside diameter 2" sleeve - non latching.
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
ME120-BLK-E-5FT

Miller Edge 2-Wire Black End Outlet 5 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualSell Sheet
4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
9003-13FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 13' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
29-98200

W-Style Universal Drop In Door 98" x 100"

  • Shipped with hardware loose on each side
  • 98" W x 100" H
  • Made with 3/4" thick 7 ply exterior grade medium density plywood
  • Includes all hardware
  • Other sizes available
DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

  • Activates two devices
  • Wire lead antenna
  • 12 and 24 Volt models
  • Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
  • The receiver can be activated by any of the Delta-3 format transmitters
  • Mounting bracket supplied
    • .......more details
Installation Manual
PRO-LH-5021U-LH

Micanan 1/2HP 230V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (PRO LHE)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • On board receiver with antenna
  • On-Board receiver holds up to 20 transmitters
    • .......more details
Installation manualSpecification sheet
271723

Rolling Steel Slide Bolts for Bottom Bar 679

B025

Rolling Steel Assembled Angles 2" x 2"x 3/16" Sold per Foot

  • Includes angles astragal and 1/2 slat
AC9

Felco C9 Cable Cutter 1/4" Capacity

  • Tool length: 13"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 9mm / 0.35in
    • .......more details
Data sheet
7096

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Curbside (RH)

  • A Whiting original
  • Cable drum and bearing
SLT-TT

Rolling Steel Thermotite Slat Foam Injected

GH751-L5

LiftMaster Gearhead with Brake 3/4HP 115/230V 1P L5 ***No Longer Available

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
PL-B11-ARM-STR

Lynx Straight Arm for Proline Operator

  • Used on Proline residential garage door openers
MOD035

Manaras Monitored Photocell Upgrade N1 to N4X

  • Ideal for industrial environments submersible and impact resistant.
  • Flexible design withstands and realigns after mechanical impact.
  • Max. range 45ft.
  • Incl. photoeyes 3ft of conductor wire and mounting hardware.
  • Applies to all operator models with electronic control "M" types.
.343-6-RH-C

Torsion Spring .343 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 6" Length: 12 ft
.295-2-LH-C

Torsion Spring .295 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 2" Length: 12 ft
.262-2-LH-C

Torsion Spring .262 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 2" Length: 12 ft
PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
IRB-BR

EMX Industries Brackets for Photoeyes Sold as a Pair

  • Brackets are predrilled
  • Used for PC-3 P41 P44 P45 and IRB-4X photoeyes
  • Made of metal
  • Sold as a pair
  • 9" x 3" L-Shaped
K72-12563

LiftMaster Clutch Shaft Kit for Model H Prior to 2005

71-B575-1

LiftMaster Internal Brake Kit 575V 3PH for L5 Operators

  • Complete with: Brake hub kit Brake release lever Brake disc Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Conduit
  • Can be replaced in-field
Instruction Manual
SEL2641R433K8PM

Erone 800 User Receiver 433MHz

  • Multi-user receiver
  • 800 two-channel transmitters + 7 master transmitters
  • Includes 1 master transmitter S2TR2641E2M for programming
  • 12/24V AC/DC
  • Option: PC software kit # SEL2641KITP8 sold separately
  • 1 NO relay + 1 NO/NC relay
    • .......more details
Installation manualWireless System Chart
2200-030

Linear Limit Nut

  • Used on various Linear Gate operators
CARRIAGE006

Manaras Trolley Carriage Aluminum Die Cast

OSH-6214-ECB

Manaras Opera-SH 1 HP 240V 1 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
VBELT_4L355

Doorlec VBelt 4L 35.5" *** NLA

  • Same as part number 19045
R5997

Shaft Collar 7/16" ID x 7/8" OD x 7/16" W Zinc

  • Axial Load: 950 LBS
  • Screw length: 1/4"
  • Screw type: Socket set screw
  • Solid steel collar with set screw
124772

Roller 3" UHMW Plastic 7-1/4" Stem Sealed Bearing

20462R

Genie Carriage Release Assembly Belt Drive ** No Longer Available

  • Carriage slide sold seperately- part number 27175B
  • This carriage is used for Genie and Overhead chain and belt channel rails
6062

Programmable Timer *** To Extent of Inventory

  • 12VDC or 24VDC operation is selectable
  • Functions include: One shot Delayed release Delayed operate Delayed pulse and Pulse / Flasher.
  • Momentary relay activation at the end of a desired timing cycle eliminating the need for having to use 2 timers to achieve this function
  • LED indicates relay is energized
  • Form C relay contacts are 8 amp at 120VAC / 28VDC
Installation instructions
LA500HDTKITSTD

LiftMaster Torroid Transformer Kit

  • Powers gate from AC power-120V or 220V single phase.
  • Ideal for applications that prefer AC transformer run operator vs. battery run operator
  • Ideal for areas that experience temperatures below -4 F for extended periods
860LM

LiftMaster Universal Weather Resistant Receiver

  • Weather-resistant for outdoor mounting requirements
  • Provides convenient access to gated communities industrial facilities and commercial sites all with a single transmitter solution
  • Three channels provide expanded remote control capacity: Channel 1 - 50 remotes Channel 2 - 20 remotes Channel 3 - 20 remotes
  • Multiple remote control options available to provide secure access from the safety and convenience of a vehicle
  • Compact design fits most gate and commercial door operators
  • Compatible with 811LM 813LM and all MAX remote controls
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

CARSENSE-101

EMX Buried Driveway Alert Sensor XC101-LV Probe Sold Separately (CS101)

  • The CarSense 101 provides a solution for many vehicle detection challenges. Where safety is an issue the CarSense 101 detects moving vehicles in blind areas along a driving path and actuates warning lights.
  • For access control applications requiring free exit the CarSense 101 detects vehicles and actuates gates overhead doors and other parking barriers.
  • Controls and indicators are mounted on front panel
  • Available in 9 - 41 VDC 6 - 29 VAC.
  • Low 2.5 mA standby current consumption makes it an excellent choice for solar power applications.
  • Housed in a small relay-type housing
    • .......more details
Installation ManualSell Sheet
790

Fasteners Hex Nut 3/8-16 1000/Box