The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
NOTE: Refer to K41-0156-000 for Left-Side Cable Tension Monitor
The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
Video camera begins recording when motion is detected.
Easy setup with Bluetooth and magnetic mounting base.
Enables secure in-garage delivery for Amazon Prime packages
Direct drive operator with a DC electric motor directly coupled to a hollow
shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 0.75 HP 90 V DC 1750 rpm motor 110 to 240 V 1 PH and 60 Hz power supply.
Integral absolute encoder to control the door travel
24 V 7 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
Pulse with modulation programming to provide soft-start soft-stop dynamic brake and speed control
Motor and controller: Continuous duty rated DC Motor with controller producing a powerful soft start/soft stop output of 2000 Newtons of force to drive commercial sectional doors while reducing mechanical impacts that cause premature wear of door components
NEMA 4X rated controller case: ZAP Controllers and push buttons are NEMA 4X compliant as a standard
Wiring type: C2 (factory default) B2 failsafe is standard with the addition of approved photo eye.
Radio control and external receiver terminals: Terminal strip provided inside the controller to provide quick convenient connections for adding external radio control receivers from any desired manufacturer
Type: control programming and diagnostics unit for devices equipped with
BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands modification or parameters and monitoring of diagnostic data
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Operating temperature: from –20°C to +55°C
• Dimensions (mm): 107 x 61 x h 20 (with wall-mounting support: 125 x 70 x h 32)
Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
Works for the following Belt Drive models: Relia-G 600 (model 1024) Relia-G 800 (model 2024) QuietLift 600 (model 1042) QuietLift 800 (model 2042) Overhead Door (model 1026) Overhead Door Legacy 800 (model 2026)
14 tooth belt sprocket for Genie and Overhead Door belt drive garage door openers
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
GH operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.
The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle.
· The Car2U system is a garage door opener integrated into your vehicle.
· The Lear Car2U kit contains a transmitter and a detailed instruction manual.
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
This versatile product is designed to help lift garage doors in a wide range of sizes and is available to order in bulk packaging.
With 30 brackets in one low-priced box this product offers a cost-effective solution for dealers who want all their garage door solutions in one single order.
Compatible with Security+ systems with Amber learn button including Chamberlain Sears Craftsman and Raynor code rolling residential openers (Safety Signal) manufactured 1997-2005
Visor clip and Lithium battery included (part #CR2032)