Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SPREADER001

Chain Tensioner for 1" shafts

Chain spreader for installation with 1" operator shaft & 1" door shaft.
Includes 2 shaft collars and set screws.
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

RADIO-EM101

Manaras 1-btn 1-door Rolling Code transmitter 390 MHz

2 operating sequences available: open/close or single button control.
Single button control allows the user the possibility to open stop or close the door by using the one button.
Comes with LED indicator CR2032 battery and visor clip.
Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.

RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

3-Channel O/C/S receiver controls one operator with MCT series transmitters.
Steel Nema 4 enclosure.
24 VAC input voltage.
2 N/O and one N/C relay
Commercial antenna Included (Radio029).

Programming Instructions - ECB Programming Instructions - CONT

RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

Controls one operator with MT series transmitters.
Operates on 24VAC.
A LED indicates that the unit has been activated.
Can be installed directly onto the control box of a Manaras operator.

Installation Instructions

RADIO-27

Manaras MT-1000 1-btn transmitter 313 MHz ** Replaced by RADIO-EM901 or RADIO-EM903

Open/Close remote for 1 door
Comes with LED battery life indicator
9V battery included
Sunvisor clip included
Alternate part number: MN-100TI-A

Programming Instructions

RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included

Programming Instructions

2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Roadside order part # 2704.162*180

2235.096

Whiting Coldsaver Bottom Panel 14-1/2" x 96" with seal and retainer

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

298601

Linear Wireless Multi-Code Keypad 310 MHz

Compatible with 310 MHz Stanley and Multi-Code receivers
4-digit access code
Backlit keys
Easy access to battery
Power: 9-volt battery
Codes: 1024 (set by dip switches)

.......more details

Installation Manual

109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

Open/Close remote for 4 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches - 10 dip switches
Power: 9-volt battery
Codes: 512 per channel (set by dip switches)

.......more details

Programming Instructions

109410

Linear 2-Channel Multi-Code Visor Transmitter 310 MHz

Open/Close remote for 2 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches - 10 dip switches
Power: 9-volt battery
Codes: 1024 per channel (set by dip switches)

.......more details

Programming Instructions

9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz ** NLA

Open/Close mini remote for 1 door
Compatible with Allstar and MVP receivers
Tab for key ring
Power: 12-volt battery
Codes: 19683 (set by nine trinary dipswitches)
RF frequency: 318 MHz

.......more details

Programming Instructions

9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

Compatible with Allstar and MVP receivers
Visor mounting clip supplied
Power: 9-volt battery
Codes: 19683 (set by nine trinary dip switches)
RF frequency: 318 MHz
Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787

.......more details

Programming Instructions

ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Supplied with quick-disconnect key ring
Power: Two CR2016 batteries incl.
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 1.25" W x 2.25" H x .48" D

.......more details

Programming Instructions

MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates one device
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P

Installation Manual

8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz

Open/Close remote for 3 doors
Compatible with Allstar and MVP receivers
Visor mounting clip supplied
Power: 9-volt battery
Codes: 6561 (set by trinary dip switches)
RF frequency: 318 MHz

.......more details

Programming Instructions

733T

Allstar 3-btn 3-Door O/C/S Transmitter 107477 318 MHz *** Replaced by P-733T

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

Universal 11-pin harness

217436

Linear Drive Sprocket - Chain (HCT)

220205-02

Linear Complete Hardware Kit for LDO LSO LCO

Includes all the hardware needed to install the operator in its entirety.
Includes the rail hardware (door bracket and header bracket) and hardware for installing the safety beams.

7176.225_31.910

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 91"

3002-200FT

Gum Hose 1/2" ID 200' Spool

1/2" inside diameter
Installed in bottom "U" rubber for use as a safety edge

300BL

3" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1705

100BL

1" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1701

4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

For angle application (45 degree)
For use with Heavy Brush

4010-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

DR

Linear 1-Ch DR3A Delta3 Receiver 310 MHz

310 MHz frequency 8 dip switches for coding 256 possible codes
24V AC/DC input power 3 terminal connection
Activates one device
Dimensions: 5.5" W x 4" H x 1.25" D
Same as: DNR00001

Installation Manual

1003-3"-YELLOW

Bottom U-Rubber 3" Yellow 200' Long

3" yellow vinyl insert 200ft spool.

1019-1-3/8-24'

Rigid Vinyl Bottom Retainer Flat 24' Long

Black - for door thickness of 1-3/8"

1019-1-3/8-14'

Rigid Vinyl Bottom Retainer Flat 14' Long

Black - for door thickness of 1-3/8"

1019-1-3/8-8'

Rigid Vinyl Bottom Retainer Flat 8' Long

Black - for door thickness of 1-3/8"

1019-1-3/8-10'

Rigid Vinyl Bottom Retainer Flat 10' Long

Black - for door thickness of 1-3/8"

1019-1-3/8-12'

Rigid Vinyl Bottom Retainer Flat 12' Long

Black - for door thickness of 1-3/8"

1014-1-5/8-16'

Rigid Vinyl Bottom Retainer Notched 16' Long

Black - for door thickness of 1-5/8"

1015-1-3/4-24'

Rigid Vinyl Bottom Retainer Raised Centre 24' Long

Black - for door thickness of 1-3/4"

1015-1-3/4-10'

Rigid Vinyl Bottom Retainer Raised Centre 10' Long

Black - for door thickness of 1-3/4"

1007-1-5/8-16'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 16'2"

For door thickness of 1-5/8" to 1-3/4"

1006-2-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/4-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1006-1-3/4-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1006-1-1/2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1003-2-16'

Aluminum Bottom Retainer L-Shaped 16' Long

For 2" thick doors.

371LMC

LiftMaster 1-btn Security+ Transmitter 315MHz

Visor clip and 3V lithium button cell (CR2032) battery included.

371LMC Manual

1003-1-3/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.
DIE # ES18009

1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

1003-1-3/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

7001-18-BROWN

Commercial Side & Top Weather-Strip 18' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-8-BROWN

Commercial Side & Top Weather-Strip 8' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-7-BROWN

Commercial Side & Top Weather-Strip 7' Long - Commercial Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

RP-3002

Rubber Plug 1/2"

To plug end of 3002 gum hose

TC1

Tri-Code Transmitter 1-btn Visor - DISCONTINUED

10 dipswitch format 3-position slide switch
Compatible with Multi-Code 300 & 310 MHz Delta3 & Stanley 310 MHz
Discontinued 7/1/13

375LMC Programming Instructions Instructions de programmation pour 375LMC

HSC-600

Hand Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Tool length is 25-1/2"
Wire rope cutting capacity 3/16”
Made in Japan

BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

For the temporary repair of a broken spring.
Wire size: .3175 - .3625

1104-16FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 16' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1104-9FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 9' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1104-7FT-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1106-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

Aluminum retainer with black dual fin vinyl

1102-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1001-10-GREY

Commercial Side & Top Weather-Strip 10' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

1001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-180

Extension Spring 8' Door - 180 lbs Gold ** Replaced by 27-48-180

Double - Loop
32" long 48" stretch 180 lb load
Springs sold individually

Spec Sheet

32-48-170

Extension Spring 8' Door - 170 lbs Orange ** Replaced by 27-48-170

Double - Loop
32" long 48" stretch 170 lb load
Springs sold individually
Rated for 10000 cycles

Spec Sheet

32-48-120

Extension Spring 8' Door - 120 lbs Green *** Replaced by 27-48-120

Double - Loop
32" long 48" stretch 120 lb load
Springs sold individually

Spec Sheet

32-48-110

Extension Spring 8' Door - 110 lbs White ** Replaced by 27-48-110

Double - Loop
32" long 48" stretch 110 lb load
Springs sold individually

Spec Sheet

25-42-240

Extension Spring 7' Door - 240 lbs Blue w/ clip

Double - Loop end for strength
25" long 42" stretch 240 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-200

Extension Spring 7' Door - 200 lbs Tan

Double - Loop
25" long 42" stretch 200 lb load
Sold individually
Rated for 10000 cycles
Same as part number 120

Spec Sheet

25-42-140

Extension Spring 7' Door - 140 lbs Blue

Double - Loop
25" long 42" stretch 140 lb load
Sold individually
Same as part number 114
Rated for 10000 cycles

Spec Sheet

25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

Double - Loop
25" long 42" stretch 90 lb load
Sold individually
Same as part number 109
Rated for 10000 cycles

Spec Sheet

25-42-70

Extension Spring 7' Door - 70 lbs Orange

Double - Loop
25" long 42" stretch 70 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-80

Extension Spring 7' Door - 80 lbs Gold

Double - Loop
25" long 42" stretch 80 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

33LMC

LiftMaster 3-btn O/C/S Transmitter 390MHz *** Available to Extent of Inventory** use 813lmx

390 MHz 9 dip switch three button visor remote
Can be used for Open/Stop/Close when used with the LiftMaster 423LMC receiver.
Visor clip & 12V battery included (ALK12V)
Same as 33LM
Can be used as a substitute for 63LMC

Programming Instructions Instructions de programmation

91-00402

Truck Door Rib Neck Carriage Bolt 1/4"-20 x 1.25" (9/16" head)

Zinc plated finish
Use rib neck carriage bolts with lock and keeper assemblies and hinge installations
Rib neck carriage bolt allows tamper proof installation with a rivet lock and eliminates the nut being installed externally for security.

28-30012

Truck Door 1" Vertical Track 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
For use with 1" diameter rollers

28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-24403

Truck Door Dual Torsion Spring Assembly 93/35 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 93" Spring Length: 35" Wire diameter: .187 Winding cone color: White

27-24401

Truck Door Dual Torsion Spring Assembly 93/33 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 93" Spring Length: 33" Wire diameter: .182 - Winding cone color: Green

27-20308

Truck Door Balancer Bracket End - Curbside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2523 for #2376 balancer

27-20306

Truck Door Balancer Bracket Clamp for Whiting Roll-Up Doors

Steel construction
Plain finish
Clamp includes nuts
Cross Reference: W #2526 for both #2376 & #7176 balancers

27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-1 T #59129-1 W #4013 330100

27-20127

Truck Door Spring Spacer 35" long for Whiting Roll-Up Doors

Extruded PVC construction with zinc plated thrust washer.
Cross Reference: 2471

26-94522

Truck Door Intermediate Panel (12" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-40018

Truck Door Bottom L-Retainer 84" Long for Todco Roll-Up Doors

Galvanized steel construction for extra strength and corrosion resistance.
Fits both standard and heavy-duty bottom seals.
Pre-punched holes for added convenience
Cross Reference: T #61191 W #4034 260000

26-14522

Truck Door Intermediate Panel (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

25E10311

Truck Door Heavy- Duty Lift Handle Black E-coat finish

Wide grip design
Black E-coat finish
Works with both Whiting and Todco Doors

26-14321

Truck Door Bottom Panel with Seal (11" x 98") for Todco Dryfreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment
3/4" thick 7 ply exterior grade medium density plywood Primer finish
Comes only with bottom retainer and seal (installed)