Devanco Canada - Get The Right Garage Door Opener‎ and Parts

1003-3"-PER-FT

Bottom U-Rubber 3" Black Sold per Foot

MK00737

Micanan Feature Circuit Board with Contactor Interface Non-Monitored 575V **use MK00642-NM

For all HP - 575V all voltages 1.5 2 3 & 5HP
Non-Monitored

Instructions Manual

50800

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

Five feet long.
OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
The weight of the vehicle compresses an electric switch which sends an open signal to the door.
Requires a 2-wire connection to the operator but does not require power to function

PEDALU42-HOOD

Aluminum Hood Only No Post for PEDALU42

Hood only No post
High quality aluminum
Boitier pied estau seulement en aluminum

Shop drawing

97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

MT-UHF-0-0

AWID Long Range Metal Mount Tag

For use with LR-2000 and LR-3000 readers
Operating temperatures from -58°F to 185°F (-50°C to +85°C)
Reading Distance up to 25 feet
Battery not needed passive tag
Passive RFID technology with excellent-price-to-performance ratio
Proprietary encryption for protection of card data

.......more details

IS40P

BEA Presence Sensor

Infrared presence sensor for use in industrial applications. The sendor utilizes 40 active infrared spots for reliable detection.
Ideal for use on automatic industrial doors vehicle gates/barriers and loading docks.
Equipped with 9 pre-programmed pattern configurations for various industrial applications.
Various learn time settings allow presence detection to either remain constant or ignore a motionless object after a pre-determined period of time.
Mounting height: 8-16'
Detection field: 10'x10' at max. mounting height of 16'

.......more details

Installation manual Sell sheet Cut sheet

M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 1" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

GH4416-04-L

Green Hinge #4 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

PIN016

Manaras Coupling Pin 3/8" for MJH

4 required for MJH manufactured prior to 1998
2 required for MJH manufactured after 1998

IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

1 ft L x 2" H x 3" W

30B530

LiftMaster Capacitor 56uF 220V ** discontinued

Same as LiftMaster # 30B620

IG2-P1

Miller Edge Pair of Pedestal Mounts for IG2 Eyes

Flexible spring loaded pedestal stand
30 degree of flex
27" high from bottom base to photoeye

IG2-K10-50

Invisi-Guard-2 Photo Eye Kit 50ft Battery Powered *** Discontinued

The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
The light beam is intended to function as a protective line guarding a potentially hazardous zone.
When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
Universal Design Works with Pre and Post 2010 Operators
Spans Distances up to 50 feet (model dependent)
Time Saving Installation

.......more details

Installation Manual Sell Sheet

IG2-K10-30

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
The light beam is intended to function as a protective line guarding a potentially hazardous zone.
When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
Universal Design Works with Pre and Post 2010 Operators
Spans Distances up to 30 feet (model dependent)
Time Saving Installation

.......more details

Installation Manual Sell Sheet

DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

500 users (proximity badges and/or codes)
3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
Audible & Visual feedback
1 request-to-exit input
Tamper switch
1 form C door relay output (3A/125V)

.......more details

Programming Instructions Instructions de programmation Sell Sheet Wireless System Chart

41ASWG-438SA

LiftMaster Motor with Limit Switch Harness for LA400

Electric motor for LA400

3007-0

Elton Telescopic Door Handle / Foot Plate Black

For door thickness: 1-3/8" - 2"
Black polyethlene
Cut-out size: 6-3/8" x 3-5/8"

FGS-634

Devanco Food Grade Silicone 262g

For use in food and industrial plants
Stops squeaks
Prevents sticking and corrosion
Protects rubber mouldings and weather stripping

Safety Data Sheet Fiche de données de sécurité

9372054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones LHW

41.25" long = 160 coils

LC-36A

LiftMaster Light Curtain **discontinued

Must be used with a primary entrapment device and be installed along the vertical plane of the door.
Color-coded transmitter and receiver for easy identification.
Provides 36 in. of effective height coverage to increase the area of protection.
Multiple sets of LC-36A curtains can be mounted on a door providing coverage flexibility.
Maximum door width of 33 ft. ensures coverage for most commercial doors.
Eight (8) LEDs per side and 22 cross-beams produce an invisible curtain of infrared light for maximum detection capability.

.......more details

Installation Manual Manuel d'Installation Sell Sheet Connecting the lc-36A to a Non-LiftMaster Opener

Z9965

Bearing Blaster

Fast and easy way to remove and re-seat bearings into bearing plates
Works for both 1" and 1-1/4" bearings
Instructions included

Instructions

27-48-400

Extension Spring 8' Door - 400 lbs Tan

Single - Loop
27" long 48" stretch 400 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-380

Extension Spring 8' Door - 380 lbs Gold

Single - Loop
27" long 48" stretch 380 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-340

Extension Spring 8' Door - 340 lbs Blue

Single - Loop
27" long 48" stretch 340 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-200

Extension Spring 8' Door - 200 lbs Tan - Sold Each

Single - Loop
27" long 48" stretch 200 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-220

Extension Spring 8' Door - 220 lbs Green with clip

Single - Loop
27" long 48" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-160

Extension Spring 8' Door - 160 lbs Brown

Single - Loop
27" long 48" stretch 160 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-150

Extension Spring 8' Door - 150 lbs Red

Single - Loop
27" long 48" stretch 150 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-110

Extension Spring 8' Door - 110 lbs White

Single - Loop
27" long 48" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-120

Extension Spring 8' Door - 120 lbs Green

Single - Loop
27" long 48" stretch 120 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G01-SS

Hinge #1 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

DWGK11

Bircher Air-Wave Switch DW40 with N4 Enclosure

Bircher pressure wave switch with connection terminals
6.3mm plug tab in impact-resistant plastic housing
For pressure wave switch series D1 grey housing bottom.
A pressure wave generated by pressing the sensing edge reaches the pressure wave switch.
The membrane deflects and the electric contact switches.
The electric contact remains switched as long as the input pressure is above the response pressure.

.......more details

Manual

41ASWG-0119

LiftMaster Release Keys for LA400 & LA500 Qty: 2

K94-36411

LiftMaster Piezo Alarm

For LA400DC

K94-36408-1

LiftMaster Reset Switch LA500 with ID Resistor

For use with LiftMaster LA500 Series swing gate operators
Includes ID resistor kit
Includes LA500 product ID

1224-GLASS-ONLY

Elton Sealed Glass for frame 1224-1-3/4"

Thermal replacement glass only

ME120-PC

Miller Edge Rigid PVC Mounting Channel Sold per Foot

ME120-BLK-E-5FT

Miller Edge 2-Wire Black End Outlet 5 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

MP00019

Micanan Up-Charge Track and #410 (#48) chain for 20' h Door *Actual length 270"*

For 1/3 HP and 1/2 HP operators only

MP00020

Micanan Up-Charge Track and #41 chain for 20' h Door *Actual length 270"*

For 3/4 HP and 1 HP operators only

8030196

Marantec Belt Connector Kit

Works for all Marantec Belt Drive Openers
For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
Includes two connector pieces and four screws
Not for use on the heavy duty rails used by Q7900 & M4900e

9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

SL532-ZP-COPPER

Zinc Plated Copper Sleeve 5/32" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST532COP. Stops are not zinc plated

SN1600341-K

LiftMaster Sentex Bypass PCB for TAC1 EL25

BY PASS Board for 1150051
Same as KSN1600341B

2376.177_25.860

Whiting Torsion assembly .177 wire size 25" spring length 86" shaft

PRO-LH-5021U-LH

Micanan 1/2HP 230V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (PRO LHE)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

K-LA500

LiftMaster Primary Replacement Arm Service Kit for LA500 Original Arm ** DISCONTINUED

Replacement arm only - no stripes old style

706111011

Rolling Steel 800 Series Guide Channel Sold per Foot

Assemblies of strucural steel angles bolted to the wall supporting the entire weight of the door.

2G-RIGHT

Rolling Steel 2" Curved Stamped Endlock Right Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlocks

7097

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Roadside (LH)

A Whiting original
Cable drum and bearing

7096

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Curbside (RH)

A Whiting original
Cable drum and bearing

7550

Whiting Winding Cone for 2-5/8" ID Spring Wire Roadside (LH)

A Whiting original

2522

Whiting Thrust Washer

Used on Whiting balancer assemblies

SLT4-22

Rolling Steel 3" Crowned Slat 22-ga Galvanized

SLT17-22

Rolling Steel 2" Flat Slat 22-ga Galvanized

340.115-CUT

Whiting Top Panel Tongue & Groove 11-1/2" h Cut to Exact Length

Primer only
Customer to specify exact length

342.115-CUT

Whiting Intermediate Panel Tongue & Groove 11-1/2" h Cut to Exact Length

Primer only
Customer must specify exact length required

348-CUT

Whiting Tongue & Groove Bottom Panel Assembly with Lock 15-1/2" Cut to Custom Size **Quote Only

Cut to exact size required ** customer must specify
Primer only

6X10PO50-RIGID

Devanco Loop 6' x 10' Rigid PVC pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

5X15SC50

Devanco Loop 5' x 15' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

GH505-L5

LiftMaster Gearhead with Brake 1/2HP 575V 3P L5 ***No Longer Available

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details