Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-J-5083-U

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Universal Mount

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PS224

Nice Battery Backup for L & M BAR Gate Op 24VDC

The Nice Apollo PS224 is a battery back-up for the L-Bar and M-Bar Barrier Gate Operators allowing the gate opener to use it's no blackout feature so you can have emergency power when the power goes out

36196A

Genie Sprocket Saddle

Sprocket Saddle for Genie PMX Chain Drive Openers With T Rail
Uses # 27191A.S Sprocket ( Not Included)

.393-514-L

Cut-to-Length Torsion Spring .393 x 5-1/4" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

1003-1-3/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.
DIE # ES18009

PRO-LH-5011U-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board 372 MHz receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

R5210

Pulley 4" Zinc Plated Steel with Sheave Strap

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Hardened inner race
Includes fork

92803N6000

Truck Door .187 x 2.188 x 60 RHW

GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

Auto voltage sensing - no jumpers to set
Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 128 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

Wire thickness: .182
Spring length: 33 inches long (assembled length)
Inside diameter: 1.188
Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.

K75-39337

LiftMaster Trolley Nut Kit LA500

The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm

Replacement instructions Instructions de remplacement

.319-6-LH

Cut-to-Length Torsion Spring .319 x 6" Left Hand Blue/Green

Spring wire only. Cones and Filler extra

97-75005

DOT-C2 Reflective Tape 150 ft x 2" W All White

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

212I

Nortek Linear Indoor Flush-Mount Keypad

120 users
Single gang design
1 SPDT 2 amp relay and three 50mA negative voltage outputs
Optional 293 relay board converts 3 voltage outputs to SPDT relays
Indoor use only
Functionality mode: 212 232

.......more details

24-24-6

Small Relay 24VAC 11-Pin 3 PDT

PRO-APTB-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

Compatible with Allstar and MVP receivers
Visor mounting clip supplied
Power: 9-volt battery
Codes: 19683 (set by nine trinary dip switches)
RF frequency: 318 MHz
Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787

.......more details

Programming Instructions

CP-MO-12-115/1

Lynx Electric Motor 1/2 HP 115V 1 Ph *** NLA

Electric motor only

41DJ002

LiftMaster Circuit Board with Plate for 8500

Board: Security+ 2.0 for DC Jackshaft Model 8500
5 year warranty

PRO-LT-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

RESET003

Manaras Resettable Overload Fuse 6A 1 Phase

CABLE012

Manaras Brake Cable 7x7 1/16 x 16" w/Stop

Comes with cable stop on one end

21-7115-1

LiftMaster Transformer 115/230V 1Ph

NEW-HAMP-R16

Garex Ready to Install Special Order

R16 Insulation - Short Panel with vertical lines carriage style - Panel spacing to accomodate decorative hinges and handles - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

99553NYHNG

Nylon Hinge Black #3 *** To extent of inventory

Equivalent to 14-ga in strenght

32-34792

LiftMaster Gear Reducer Nema 56C 30:1

Compatible with LiftMaster® Model SL585 Slide Gate Operators
Same as K32-34792

950-188

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Left Hand

Original Richards-Wilcox part

H12G04-SS

Hinge #4 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

MP-00032

Micanan Center Mount Modification W/ No Chain Hoist PRO-J

Provides for center mount installation of a jackshaft operator
Operator output shaft is coupled in line with door shaft assembly
Couplings NOT supplied
NOTE: Reverse limit modification required

.437_3-3/4"-RH

Torsion Spring .437 x 3-3/4" x 12ft RH Red/Green

Wire size: .437
Inside diameter: 3-3/4"
Length: 12 ft

MGH-6534-ECB-RH

Manaras 1 HP 600V 3P Jackshaft ECB Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

SF375

Spring Fitting 3-3/4" Pair (Long Ear)

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

.......more details

CP-SH-34-16-1212

Lynx Complete Clutch Shaft Assembly for CDJH

3/4" -16 x 12.50"

25-42-260

Extension Spring 7' Door - 260 lbs Brown w/ clip

Double - Loop end for strength
25" long 42" stretch 260 lb load
Sold individually
Rated for 10000 cycles

OSH-6534-ECB-LH

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

60-7248-689E

Wheel Chock Safety Pkg incl'd: pryamid chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 68-9E Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

PRO-GT-5043-U

Micanan 1/2HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

38001404

Tork Winch CW 1800 Curtain Winch Formally TW1200 *** Price by Quote Only

Special Order item

7176.218*28.85

Whiting Heavy Duty Torsion Assembly .218 x 2" shaft 85"

1005-3-18'

Aluminum Bottom Retainer 3" U-Shaped 18' Long

For door thickness 3"

GHX-311-1-RH

Doorlec Explosion Proof Gear Head 1 HP 120V 1PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

TDC22X1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 60 Cycles/Hr 2200LB

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

2376.177*34.960

Whiting Torsion assembly .177 wire size 34" spring length 96" shaft

2806.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 34" Long
Roadside
For Curbside order part # 2807.177*340

CBG24DCGMC

LiftMaster Techna Commercial DC Barrier Gate Operator

24VDC barrier gate operator with battery backup
Continuous-duty motor with soft start/stop
Exceptional starting torque and continuous operation
Heavy-duty motor supports 6000 cycles per day
Operator speed of 2.5 seconds to open or close
Aluminum alloy chassis

.......more details

Installation Manual SellSheet Data Sheet

5001-16-CREAM

Residential Side & Top Weather-Strip 16' Long - Cream

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

5001-7-SANDSTONE

Residential Side & Top Weather-Strip 7' Long - Sandstone

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

JHDC22X1BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 120/240V 1PH 60 Cycles/Hour 2200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

MOTOR318

Manaras Electric Motor 1 HP 120/240V 1Ph

Continuous duty C-flange TEFC 60Hz

112357.0004

Overhead Logic Board for RSX 575V 3PH

Fits OPRSXH75015BR

K41-0082-000

LiftMaster HD Motor Replacement Kit

This service kit is compatible with the following models: HDSL24UL & HDSW24UL

15-41B18LGH

Sprocket 41B18T 1" Bore

Also known as: 155016 41B18
18 Tooth Sprocket #41 Chain (41B18)
Includes 2 Set Screws

SUPPORT014

Manaras Board Snap Locking Support 7/16" ** Special Order Only

028-200

Blue Giant Proximity Sensor 18mm 2m Cable **Special Order

Price by Quote Only

017-034

Blue Giant Spring Wire T/L85 Spring **Special Order

Price by Quote Only

7176.235*34.930

Whiting Heavy Duty Torsion Assembly .235 x 34" shaft 93"

MC271-2W-RH-GRAY

Miller Edge MC271 2-Wire Non-Monitored Right Hand Gray Includes End Flaps - Sold per Foot

Ideal for Cornell double angle bottom bar
Flexible and will conform to floor irregularities
Optimum size for 2+ inch thick surfaces
Custom manufactured to user specifications for color length and outlet location
5-inch end flaps create a complete seal and can be trimmed for custom fit
Sealed assembly impervious to dust and debris

.......more details

7176.218*29.091

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 91"

GAREX-WINDOW

Garex Thermos Made-to-Order Size Special Order

Special order to suit customer's needs

BPPN17516

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 192" (16')

PB-001

Skylink Garage Door Wall Button

Install the Skylink Wall Button inside your garage.
Allows manual operation of your garage door opener.
Illuminated LED indication.
Easy to Install.
30-foot Wire Included.
Mounting Hardware Included.

.......more details

SHSS-38-1

Set Screw Square Head 3/8" x 1"

Natural black
16 threads per inch

BPPN17524

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 289" (24')

GALV-343-6-144-L

Torsion Spring .343 x 6" x 12ft LH Galvanized Blue/Red

Wire size: .343
Inside diameter: 6"
Length: 12 ft
Galvanized

GALV-306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-6-INSTALLED

TDC41-12

LiftMaster Trolley Chain Pack #41 1200/2200LBS 12ft Door

Chain pack only
TDC41-12 is a #41 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 12' commercial doors

086565.1013.S

Overhead Door Chain RLR #25 x 62P Loop

BCSI-PM17

Pivin Drapeau Secondary Shaft *** Price by Quote Only

OGH-6535-M-N1-RH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

10-LHB

BEA LZR Housing Bracket

��Housing bracket for the LZR-H100 sensor

10TD900HH3

BEA 3-Button Transmitter 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
Operating temperature: -10 to 55C
IP65

K21-16699

LiftMaster Transformer 120/240V 75VA 24VAC

For use with various LiftMaster® Speed Jack Commercial Door Operators

SHAKER-R16

Garex Ready to Install Door Special Order

Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
Panel Width: Up to 24 feet (732 m)
Texture: Woodgrain
Offered in various choices of colours

29140

Doorlec Transformer 230V pr 120V sec 50VA

230V primary 120V secondary 50VA

BOARD076R

Manaras Replacement Power Board

Used on all Manaras circuit board type operators

GALV-273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-375-334-R

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Galvanized Yellow/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

LA400XL20W

LiftMaster Single Arm Solar Package for LA400 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA400DC)

Kit Includes: LA400DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA400DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016

99000568-PER-FT

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)

CPT215-END-KIT-T3

Miller Edge End Kit for CPT215 Doide Capacitor (T3) Configuration

Kit contains: 2) Caps (2) cages (1) wired plug (1) diode capacitor plug (1) non-mon. plug (2) screws

GALV-273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

041D8993

LiftMaster Cover Silver 8365W 83650-267

Replacement LiftMaster® Cover.
Compatible with various LiftMaster® 8365W Series WiFi® AC Chain Drive Garage Door Openers; powered by myQ

10SSTI

BEA Active Infrared Presence Sensor

Active infrared sensor for industrial environments.
Applications: automatic industrial doors gates and automation.
Uses triangulation to detect presence of an object eliminating false detections caused by varying ground conditions.
Can be mounted on stationary or moving objects.
Can be used individually or daisy-chained with up to 8 other modules.
Can be used on narrow and wide doors.

.......more details

19-40ML-SS

Master Link #40 Stainless Steel

For #40 chain

GX-200

Garex Ready to Install Door Grooved Special Order

Panel height 18* 21 and 24 inches (45 53 and 60 cm)
Panel width 1 ⅜": Up to 18 feet (548 m) 1 ¾": Up to 28 feet (853 m)
Door Thickness 1 ⅜" (3493 mm) / RSI 211 (R-12) 1 ¾" (4445 mm) / RSI 281 (R-16)
Windows 1 ⅜": Standard injected frame (1520 or 1542) 1 ¾": Standard injected frame (24x12 or 40x13)
Metal Thickness 26 ga Steel : 047 mm (00185 in) 23 ga Aluminum : 061 mm (0024 in)
Insulation: High-density polyurethane meeting the highest environmental standards

.......more details

CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
Chain Spreader for Maxum for 1" door shaft

OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

OSH-6532-M-N1-LH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

8086.207.320

Whiting .207 x 2-5/8 IN x 32" Roadside with Cones

An original Whiting assembly

8087.207.320

Whiting .207 x 2-5/8 IN x 32" Curbside with Cones

An original Whiting assembly


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login