Devanco Canada - Get The Right Garage Door Opener‎ and Parts

25-42-260

Extension Spring 7' Door - 260 lbs Brown w/ clip

Double - Loop end for strength
25" long 42" stretch 260 lb load
Sold individually
Rated for 10000 cycles

E/BLOP/103

Automatic Systems Keyswitch

Locks barrier in an open position (captive)

SL-310R

Skylink Universal Receiver 310 MHz ** No Longer Available **

This "Universal" Receiver guaranteed to work with any garage door opener regardless of age or brand (US & Canada only).
Works with Skylink Universal Transmitter: Model SL-310T SL-310T2.
Operates at 310MHz.

K72-12509

LiftMaster Output Shaft Kit (3/4 & 1 HP)

For commercial operator model T
Complete with: Output Shaft Bearing Roller Chain with Master Link Limit Chain Shim Washers Roll Pins Push Ring 3/4' and Sprockets (41B32 & 48B10)

30257T

Genie Coupler Screw Drive Units

Used for attaching the screw of Genie screw drive rail to the motor head.
This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
To check and replace that part remove the two screws holding the rail to the main power head
Mounts on rear of opener rail and fits in motor head.

V-101-B

Vinyl Black Sold per Foot

Vinyl for 101-ALUM

K74-18379

LiftMaster Hall Effect Sensor for SL575 SL585

Hall effect assembly for SL540/570/580/575/585 operators with GL Board
Includes: screws flat washers lock washers and replacement instructions
Same as: G74G0487
This part has a short lead-in wire and will not work with SL590 or SL595

AIRSWITCH017

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit

The small radio transmitter unit and the pneumatic switch are packaged within the DW3S case while the receiver is built into a Nema 4 case
It is equipped with a NCC or a NOC relay
Battery is included # CR2032

Programming instructions

41A5021-1G

LiftMaster Receiver Logic Board (41A5021-1I) **to extent of inventory

This circuit board works with Security+ openers with no light socket.
Same as 41A5021-1I 41a5021-3E 41A2021-1 41A5021-1B 41A5021-1C 41A5021-1D 41A5021-1E 41A5021-1F 041A5021-1G 41A5021-1H

MK00643

Micanan Auxiliary Apt. Circuit Board for Red/Green Light Feature 115V Models Field Install

Auxiliary device logic board
Controls red/green lights
Provides Normally Open dry contacts for fully open or close positions
Normally Open dry conatcs for door opening or door closing cycle
Works on circuit boards: MK00641 MK00642 MK00701
Includes installation hardware

.......more details

Instructions Manual

GH503-L5

LiftMaster Gearhead with Brake 1/2HP 208/230/460V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

MOD081

Manaras Damp Environment Oil and Dust Tight Modification Supplied with Monitored N4 Eyes

For applications where dust water spray oil leaks or any other type of condensation is present.
Includes TEFC motor seal-tight conduit and connectors NEMA 4/12 O/C/S push-button station NEMA 4/12 control box
If operator is monitored this modification will upgrade the photoeyes to NEMA4 as well

37028C.S

Genie Control Board for Model 2022 ** Repl. by 39537R.S (no cover)

For ReliaG 800 model 2022 gaarage door opener ◾ Genie 37028A Control Board for Genie Models 2022 2024 and 2042 Chain / Belt Drive Openers ◾ Works for the following models only: ◾ ReliaG 800 (2024) PRO Series 1 Piece Rail ◾ QuietLift 800 (2042) ◾ ChainLift 800 (2022)

AUXCARD

LiftMaster Auxiliary Relay Option Board

Provides additional contacts for and control of auxiliary devices such as external heaters security devices or warning devices
5V to 240VAC

Programming Instructions

F539.90000

Bircher Infrared Programming Remote RC Duo 2 Red

Conveniently program all parameters from ground level
Backlighting of specific buttons provide instant confirmation of programmed parameter & value
Configure any Hercules 2 Hercules 2s Reflex 2 or UniScan sensor with the same remote
Multiple address feature allows programming of a single sensor even in close proximity to other sensors
Large highly visible buttons
Automatic off feature conserves battery life

.......more details

Programming Instructions F539.90000 Sell Sheet

PMT20KIT

Carlo Gavazzi PMT20RI & PMT20I Thru Beam Kit

Suitable for exterior applications NEMA 4
Multi-supply voltage 12-240VDC 24-240VAC
LED indication for power supply and target detected
Not recommended for carwash applications
Operating temperature -25 to +55 C
Terminal 5 Common "NO" on Terminal 4 "NC" on Term. 3

.......more details

Installation Manual

377LMC

LiftMaster Wireless Keyless Entry 315 MHz ***Replaced by 878MAX

Compatible with Liftmaster Sec+ garage door openers commercial door operators gate operators and radio control receivers
Mounts easily to the door jamb with two screws
Compatible with openers built 2005+
Replaces 376LMC and same as Chamberlain 956D same as 377LM
Includes 9V battery

Programming Instructions Instructions de programmation

41D3452

LiftMaster Limit Switch Assembly

Compatible with most operators 1986 - current

K001A6837

LiftMaster Replacement Logic 4 Circuit Board L4

iftMaster replacement logic board (L4) kit for Commercial operators L4 board is UL325 compliant & requires CSPU photoeyes for momentary contact operation
Works with LiftMaster operators of all voltages and HP
Maintenance Alert System (MAS)
Open Mid Stop feature
Timer-to-close mode
Car dealer mode

.......more details

22-240

Brake Solenoid 230-240V

Used on all brands of commercial door and gate operators
2 wire connection

41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

For LiftMaster Chamberlain & Sears openers built from 1993-1998
Kit includes: Saftey sensors 24" wire and gel connectors
Replacement: 041-0136 with the 041-0155-000 brackets

17315

Doorlec DC-3200T 32-Channel O/C/S Transmitter 313 MHz

Wall mount transmitter for 32-doors
Includes 9V battery
Old style

Programming instructions

RADIO-EM101

Manaras 1-btn 1-door Rolling Code transmitter 390 MHz

2 operating sequences available: open/close or single button control.
Single button control allows the user the possibility to open stop or close the door by using the one button.
Comes with LED indicator CR2032 battery and visor clip.
Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.

DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by 8 dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

For the temporary repair of a broken spring.
Wire size: .3175 - .3625

PRO-CUT

Pro-Cut Angle Cutter

Performs accurately up tp 2x2 angle.
Capacity is 12 gauge steel.
Weight is 18.5 lbs.

25-10402

Truck Door Pull Strap (15.5") with Zinc Retainer for Roll-Up Doors

Durable 2" wide black nylon construction for added strength and durability.
Custom lengths available
Cross Reference: 257000

CSL24UL

LiftMaster New 24VDC Commercial High Traffic DC Slide Gate Operator

Battery Backup: 208 cycles or up to 24 days of standby power when the power is down
Security+2.0®: Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used
MyQ®: Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app
Soft start / stop extends operator and hardware life in high-cycle and heavy-gate applications
Wireless dual-gate communication eliminates expensive conduit costs and unsightly driveway scars
Keyed manual disconnect when unlocked allows gate to be operated manually.

.......more details

Installation manual Manuel d'installation Sell sheet

37220R

Genie Replacement Safety Beam Set

Works on all Genie model openers including Legacy with 2-pin connector safety beams
Not compatible with openers made before 1995
Brackets and wiring included
Will work with all Genie and Overhead Residential openers that were manufactured with photo-eyes

MJ00015

Micanan Brake Shoe Assembly for Old Style Manaras Operators

Assembly includes both right & left brake shoe

EBOX-HHD-7511-R

Complete Control Box for PRO-HHD-7511 with Mechanical Contactor and Timer to Close

BGARM14LED

LiftMaster TECHNA Barrier Gate Arm only 14ft with LED

Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle.
Compatible with the S50L a wireless edge safety device.
IP68 rated waterproof LED lights
Operating temperature: -25C - +60 C

.......more details

JHDC12S4BMC

LiftMaster MAXUM Jackshaft 3/4HP 480V 3PH DC Operator 30 Cycles/Hour 1200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

10SSTI

BEA Active Infrared Presence Sensor

Active infrared sensor for industrial environments.
Applications: automatic industrial doors gates and automation.
Uses triangulation to detect presence of an object eliminating false detections caused by varying ground conditions.
Can be mounted on stationary or moving objects.
Can be used individually or daisy-chained with up to 8 other modules.
Can be used on narrow and wide doors.

.......more details

BEA-10EAGLE-ARTEK

BEA Eagle Compact Motion Sensor 6'-13' Mounting Height

EAGLE ARTEK is a motion sensor for all types of automatic doors. Its slim and compact design ensures discreet integration for your application making it ideal for pedestrian doors.
Superior field performance with improved filters that help to reduce false detections.
Easy to install and set up with flexible parameters and simple push-button settings. •The detection field can be adjusted without manually adjusting the antenna.
Max. detection range: wide: 13’ × 6.5’ narrow : 6.5’ × 7’ (@ 7’ high)
Temperature range: -4 – 131 °F (-20 – 55 °C)
Cable length: 8’

.......more details

Installation manual Spec sheet

50-19503

LiftMaster Push to Open Bracket

Allows the gate to swing away from the property
To be used with LA400 and LA412 gate operators

Installation manual

PLA10

NICE Electric Gate Lock Vertical Mount 12V

Required for gates longer than 3m (9.84')
Vertical mounting
Possibility of manual opening
Power: 12V 15VA 50Hz

1-0316

Richard-Wilcox 22 x 31 Track Bracket Double Zinc Plated

1/2" clearance needed between doors. Maximum door thickness of 2"
Weight: 3.5 lbs
Capacity: 400 lbs 500 lbs
Material: Formed Steel 3/16" thick

41014

Doorlec Emergency Release Spring

Attaches to the wall disconnect leverto put the operator in manual mode in case of power failure

27026

Doorlec Electric Motor TEFC 1.5 HP 115/230V 1P DC203C

General purpose - Frame 56C
1725 RPM for worm-gear reducer models TEFC type

E/BLOP/371

Automatic Systems Loop Detector for Logic Board with Drive

Feig Double Channel Loop Detector Option for AS1620 which is the new logic board with drive for the BL229

E/1929/235

Automatic Systems Axis 1.5" Ass'y w Bearings(BL229)

Used on the BL229 gate op.
Main pivoting shaft

41D3058

LiftMaster Electric Motor and Bracket Kit

Complete kit includes: Motor and bracket assembly sprocket RPM sensor grease and bearings
Also known as: 41D3058 41A2821 41A2820 41A3058

827LM

LiftMaster MyQ Remote LED Light Sec+ 2.0 *** To Extent of Inventory

Easily mounts on ceiling or wall within 6 feet of a 120V electrical outlet.
Can be programmed to turn on and off at certain times through the MyQ App.
LED bulbs require no maintenance.
1500 lumens – about 50% brighter than many standard LED lights ensures the garage is always bright.
Programmable to work with any MyQ – connected garage door opener Security+ 2.0® garage door remote control/control panel or smartphone.
Compatible with remote models: 374UT 375UT 892LT 894LT 891LM 893LM 890MAX and 893MAX

.......more details

SPA-6606-01

Gear Wheel Nylon Sold in Pairs

Dynaco Gear Wheel for Rapid Roll Door
Sold in Pairs

STEELCRAFT_PANEL_SEAL

Steelcraft Intermediate Section Seal V-Bead Sold by the Foot

DM120-125-T/FORCE

Cable Drum High Lift 120" D575-120-1-1/4" Pair Torque Force

120" High Lift aluminum die cast alloy cable drums.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
Maximum high lift: 120".
Maximum door height: 144" + High Lift.
Rated lift per drum: 500 lbs.

.......more details

K1D8389-1CC

LiftMaster Main Board DC Pad Mount for UL325

This replacement board is compatible with the following models: CSW24U CSL24U RSW12U and RSL12U
Also compatible with HCTDCU and HCTDCUL Overhead Gate Operator
Same as 001D9039-1CC

104462

Marantec 7ft Belt Rail 1.2mm Heavy-Duty M13-1207B

1-piece rail

K72-12507

LiftMaster Clutch Shaft Kit (3/4 & 1HP)

Clutch Shaft Kit 3/4 & 1 HP Trolley operators
Complete with: Clutch Plate Clutch Shaft Bearing 3/4' I.D. Sprocket 41B10x3/4' 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener

Installation manual

24-230-5

Relay 3 PDT 230V 7A

208/230VAC relay
Used in BG770 gate operators

3-32-1

Low Headroom Top Bracket 2" Residential 1 pc

For residential door with 2" track

NTL-400

Devanco Canada Clear Door Lube 425g Aerosol

Ozone Friendly Door Lubricant with anti-wear and extreme pressure additives.
Silicone Free
Non-drip clear formula provides long lasting lubrication and protection where metal to metal friction occurs. •Ideal for use on door tracks hinges springs rollers chains cables gears and more.
15 oz Cans
Available for private label
Same as 400-HD

.......more details

Safety data sheet Fiche de données de sécurité

98875

Marantec Shark Tooth Position Reference Tab Chain Rail

For chain rails.
This part is installed inside rail on the actual chain.
This part works with the reference switch to determine the open & close limits of the garage door.
Reference switch part # 104083

DXT-21

Linear 2-Btn 1-Channel Handheld Transmitter 315 MHz *** Discontinued

A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required
Powered by two 3-Volt #2032 lithium batteries included

.......more details

Installation Manual

BIG-METRO-1PKG

NICE Big-Metro Single Arm Kit

For swing gates with leaves up to 5 m
Underground installation.
BM5024 Motor: Irreversible 24 Vdc with magnetic encoder complete with connecting lever and mechanical stop for the closing manoeuvre.
Compatible with 2 foundation metro boxes externally chamfered with mechanical stop on opening: in stainless steel (BMBOXI) ideal for use in extreme conditions and with the new cataphoresis paint finish (BMBOX) highly resistant to corrosion.
Maximum freedom of choice: release from inside or outside two key or lever operated models freely combinable and easy to operate with just one hand.
Recommended control unit: Moonclever MC824H Features: Simple programming by means of a single key;

.......more details

M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 1" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

D525-216-1

Cable Drum Standard Lift 18' 3-SS Torque Force Pair

18' standard Lift aluminum die cast alloy with 3 set screws.
Pair includes: (1) LH and (1) RH.
Color coded: Red=LH and Black=RH
Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
Max. Cable Diameter: 3/16". Mounting: 1" solid shaft with 1/4" keyway
Cross Reference: DM518 DNS 5-18 OMI 2200

.......more details

37301R

Genie C-Channel Chain Extension Kit

The extension kit for C-channel chain drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door

36-RWB-PAIR

Winding Bars Round 36" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

P93501100013

Lux 2B Hydraulic Swing Gate Operator 120V UL/CSA

Leaf Weight: Up to 660 lbs (300 Kg)
Leaf Length: Up to 10ft (3 m)
Opening / Closing time: 17 seconds

78236

Marantec Modular Receiver 315 MHz ***available to extent of inventory see details***

Only available in 315 MHz. Be sure to check which frequency is required
Works with Marantec residential opener models 4500e 4700e 4900e
Replaced by 75424 plug-in receiver

25605R

Genie Inner Slide Kit for Chain Drive Models

The innerslide attaches to the chain and connects the carriage to the chain
Works on the following Genie and Overhead Door models:
IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
SP99 – SP SERIES LD100-500-100A-550A LAD125-555
CM6000-6000A-60-70-80-60S
OHD-696 696CD + Others

.......more details

NIR

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5200-2)

Watertight packaging
Detection range: 30 feet
6 foot cord
Reflector Bracket and mounting hardware Included
2 LED indicators
Sensitivity adjustment

.......more details

Installation Manual Sell Sheet

881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
Light run-time is 4 1/2 minutes with adjustable light timer option

.......more details

RA-LPL-KEYPAD

Lynx Wireless Proline Keyless Entry 303 MHz

Illuminated keypad
Weather shutter protects keypad from elements
1 to 6 digit codes for maximum security
Allows for access without remote or keys
Compatible with Lynx residential openers built from 2000+
Mounting screws and 9V battery included

.......more details

Compatibility chart

BRAKEPART019

Manaras Brake Band Assembly (Standard Brake)

Replaces BRAKEPART017 SHOE008
To use on brake drums with edges (DRUM004)
New part number is BRAKEPART019KIT

Installation Manual

HAE00047

Linear Complete Gear Set with Grease

Set includes: Helical gear worm gears and grease
Helical gear measures 2-7/8" diameter

Z9003

Pusher Spring - 27" Sold as a Pair

Pusher spring 27" long with 15" travel. Sold as a pair

HD3120

Commercial Inside Slide Lock for 2" or 3" track

Track use: 2" or 3"
Throw: 2-11/16"
Offset from inside face of door to lockbar: 1/2"
Bright zinc plated steel with spring actuated lock bar.
Same as part number 270

HD8460-KYD-ALIKE

T-Handle Cable Lock System 1-3/8"- 2" ** Keyed Alike **

Complete cable locking system for a 1-3/8" or 2" door Keyed alike
System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
Also works for for 1-3/4" doors
T handle KA5 = keyed alike increment of 100 (5 different combination box (20 of each #)

CORNELL-RS-DOOR

Cornell Rolling Steel Door Made to Order Price by Quote Only

LDJ-CAP-48MFD

Doorlec Run Capacitor for LDJ RCR50-370

370VAC/B 50 uf 50/60 Hz
CSC run capacitor

OMH-6112-M-N1-LH

Manaras Opera-MH 1/2HP 120V 1Ph with Monitored Circuit Board N1 Eyes Left Hand

A medium-duty operator designed for use on standard high and vertical lift sectional doors and grills.
14 cycles per hour 50 cycles per day
Included PHOTO 070 Nema 1 eyes
Includes mechanical brake

36350

Doorlec Reversing Time Delay 1.5 sec. 24VAC

In closing cycle door will stop for 1.5 seconds and reverse to fully open

MA010

LiftMaster Gate Arm Bracket

Designed for use on all Mega Arm gate openers
Bracket will work with either right-hand or left-hand operation gate arm.

CELLOPENER-365

EMX GSM Access Control & 365 Day Timer 2000 Users EMX-5431-1

Up to 2000 Programable Users
Weekly & 365 Day timer
AutoAdjust for Day Light Savings Time
Remote Programming From Anywhere in the World
GSM SIM Card Included
Cell Phone SMS Activation Required

.......more details

821LMC-S

LiftMaster Smart Garage Control White

Smartphone control: Control secure and monitor your garage door from anywhere.
Universal: Works with all major brands of garage door openers manufactured after 1993.
New design: Compact modern design with a white finish that blends in with ceilings walls and garage doors. New mounting plate simplifies install.
Improved setup: Bluetooth Low Energy (BLE) integration makes setup easier than ever.
Download the myQ® App and follow the in-app instructions to get set up in minutes.

Installation manual Manuel d'installation Product guide Guide de produit

LDC801

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail (LDCO801)

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Remote compatibility chart

GEAR004

Manaras Plastic Gear for MDJ/MDT

White plastic gear with 2 holes to accept COUPLING001

FLOX2R/A

NICE Wireless Universal Digital Receiver 2-Channel 433 Mhz

Features step-by-step timer and anti-burglar functions.
Works with all standard gate operators.
Management of multi-user system through the unique personal code.
Uses BM250 memory which holds 255 codes.
Reception frequency : 433.92 MHz
Power input : 24V or 12V ac/dc ± 10%

.......more details

MPEL

LiftMaster Mounting Plate for Post Mount Gate Op

Multiple post-mounting options: 3 in. round on the outside 3 in. round on the inside 4 in.square welded on the inside
Compatible with operators CSW200UL SL3000UL and RSW12V
Also known as: 012381777075
Dimensions : 27 x 24.5 x 6 inches

MPEL Manual

BK438/PR-USA

End Bearing Plate Flanged 11-GA 4-3/8" with Bearing. Commercial Sold as a pair

For commercial applications Used on wood jambs
Includes (1) RH and (1) LH plate with bearing
EBF438- USA Style

CP-SH-58-812

Lynx Complete Output Shaft Assy for TC3

Complete assembly with bearings
Used to be 8-1/2" long it is now 10-1/2" long will work the same.

BEA-LZR-I30

BEA Laser Scanner for Ind. Automation Time of Flight Sensor Nema 4

The product configuration provides four laser-based curtains offering a three dimensional safety zone each capable of 360 in x 360 in (30 ft x 30 ft)
Designed for the detection of people and vehicles in both indoor and outdoor environments
The detection accuracy makes this sensor ideal for high performance industrial doors vehicle flow safety perimeter protection and a variety of applications. Detects objects as small as 2 inches at 30 feet away
IP65
Operating temperature: -22 to 140F
Three visible LED spots provide accurate reference points when adjusting the tilt angle.

.......more details

Installation manual Sell sheet

02-103LGO-1

Push Button Station 3-btn Surface Mount O/C/S Nema 1 For LGO Ops only

PBS-3R
Open-Close-Stop
Works with Liftmaster LGO commercial operator
Also known as: 02-103LGO1 02103LGO1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
Normally Open contact on Stop therefore it won’t work on any other LiftMaster operator besides the LGO. The 02-103 will work on all operators.

.......more details

PRO-GJ-5011R-RH

Micanan 1/2HP 115V 1P Gearhead Operator with Mechanical Contactor

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
1/2 HP high starting torque instant reverssssible motor
#41 roller chain drive & 41B19 operator drive sprocket
Emergency floor level disconnect for manual operation

.......more details

RADIO-RE900

Manaras 1-Channel 24V Receiver Fixed Code Dip-Switch 313 MHz ** Replaced by RADIO-RE901

Commercial receiver controls one (1) operator (door)
Pairs with an infinite number of identical transmitters
practical learn button on front surface
Nema 1 enclosure
Retrofits to older generation fixed code Manaras transmitters and receivers. No need to change other devices
Compatible with most commercial operator brands on the market

.......more details

Manual

27222A

Genie Sprocket Bushing *** To extent of Inventory

For Genie Chain Drive or Belt Drive Channel Rails.
Fits the following models: PMX700 PMX1200 GPS00-IC GPS1200-IC
Available to extent of inventory

25-60407

Truck Door Rear Frame Conversion Bulk Kit with 7" Header 2" Wide

Converts swing doors to roll-up doors by removing the old swing doors and weld conversion corner post and header in its place
Vehicle is now ready for roll-up door installation
Corner post has added lip length to allow easier weld during installation
Steel construction .125 thick
Each bulk kit includes two (2) corner posts and one (1) header
Plain finish

.......more details

172845

Disconnect Chain Hoist Wall Mount 4:1 Torque Force

Wall mounting
4:1 reduction
Maximum pull allowed on hand chain is 35lb
Includes (1) 41B36 sprocket with 1” bore 4’ of #41 roller chain 26’ of hand chain (1) chain keeper (2) set screws 5/16"-18 and limit switch