Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

Actual length is approx. 12'-1"

831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

Programming Instructions

MWR12

Miller Edge 1-Channel Receiver RF 318 MHz *** To Extent of Inventory

��The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
Power requirements: 10 to 40 VDC 10-30 VAC
Output: dry relay contact N/O and N/C 1A @60VAC
Operating temperature: -40C to 60C
Maximum operating distance: 100ft
Electrical configuration: optional N/O or N/C

.......more details

Installation Manual Sell Sheet

1116633901.S

Overhead 1-btn Transmitter 390 MHz

Replaces the 1091303901.S
1 channel transmitter opens and closes 1 door
Codes using 9 dip switches with 3 positions
Battery (ALK12V) and visor clip included
Compatible with all Overhead Door 390 MHz frequency garage door openers that were manufactured before 1996.
This was a common remote on the 556C

.......more details

Programming Instructions Instructions de programmation

K72-10047

LiftMaster Limit Shaft Kit T APT SD & GH 1/2 HP - 2 HP models L5

For models T APT SD & GH 1/2 HP - 2 HP models L5

MP-00001

Micanan Timer to Close 24V Modification

3-button o/c/s function timer will start counting from fully open reverse and reset from any device
24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)

AIRSWITCH007

Manaras Exterior Adjustable Air Switch SPDT

To be used with metal case part # AIRSWITCH008

SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.

.......more details

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

PED42

Pedestal Post 42" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look
Same as G559

DD-KIT

Linear Double Delta Radio Kit (2X DT & 1X DR)

Kit includes two DT remotes and one DR receiver
Same as: DNP00006
Operates on 24 VAC power
Codes: 1024 (set by dip switches)
RF frequency: 310 MHz

Installation Manual

25605R

Genie Inner Slide Kit for Chain Drive Models

The innerslide attaches to the chain and connects the carriage to the chain
Works on the following Genie and Overhead Door models:
IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
SP99 – SP SERIES LD100-500-100A-550A LAD125-555
CM6000-6000A-60-70-80-60S
OHD-696 696CD + Others

.......more details

BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

With C16-32F bearing
Galvanized steel
3-3/8" shaft offset
Flange allows plate to be bolted to the wall for additional support
Same as part number 209

MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

The MGT is the industry’s only fully supervised gate safety edge transmitter.
It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
Features Include:
Signals access controller for stop or reverse when safety edge activates
No cables or coiled wires

.......more details

Programming Instructions

1086090001.S

Overhead Drive Gear for Overhead 556

White plastic gear only for Overhead model 556

41A7635

LiftMaster Transformer 100V

For model: 8550

02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red

Open/Close/Stop allows complete control of the door.
Compatible with all commercial door operators.
NEMA 4 4X 12 13
Outdoor surface mount station with polycarbonate enclosure part # XALD03H7

Sell sheet

GK-BX

Genie Dual Frequency Wireless Keypad 37224R

Temporary PIN codes to allow for one time special access needs
Able to operate up to three Genie Intellicode garage door openers
Auto-seek dual frequency technology automatically transmits in both 315 and 390 MHz
Compatible with Intellicode 1 and Code Dodger series

Programming Instructions

41D794

LiftMaster Replacement Motor with Positioning Sensor

Electric motor for model 3850

Installation Manual Manuel d'Installation

475LMC

LiftMaster DC Battery Backup *** To Extent of Inventory

For use in Liftmaster 3500 3800 and 8500 models
1 year warranty

Installation Manual Manuel d'Installation

880LM

LiftMaster Smart Control Panel Sec+ 2.0 ***Discontinued replaced by 880LMW***

Menu-driven panel gives you complete control of the garage door opener; easily view inside garage temperature time and system diagnostics
Equipped with the Maintenance Alert System
On-board programming capability makes it easy to program remote controls and MyQ enabled accessories and adjust settings
Timer-to-Close automatically closes the garage door in 1 5 or 10 minutes; custom setting from 1-99 minutes
Displays Fahrenheit or Celsuis
Motion detector automatically turns on garage door lights when movement is sensed

.......more details

Installation Manual Manuel d'Installation

41A4252-6G

LiftMaster Circuit Board Assembly ** Discontinued

Assembly includes: circuit board end panel and light socket
Also includes: 1 Multi-Function wall control panel - 2 wire
For chain drive units with two lights
Fits 1250 1260 1270 1280 220WD 320WD 5100 7200 & 8100

K79-15016-1

LiftMaster RPM Sensor Assembly

RPM sensor for Liftmaster Logic Control L2 L3 L4 & L5 Commercial operators

24-24-1

LiftMaster Relay 24VAC 8-Pin DPDT Flange

41K4629

LiftMaster CPS Interface Black Box (CPICARD)

Allows CPS-U photoeyes to provide a 'NO' contact
Interface is included with CPS & CPS-N4
Also known as 041K4629 1C4489 41K4629 41C4489 CPI

109410

Linear 2-Channel Multi-Code Visor Transmitter 310 MHz

Open/Close remote for 2 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches - 10 dip switches
Power: 9-volt battery
Codes: 1024 per channel (set by dip switches)

.......more details

Programming Instructions

DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

Activates two Delta-3 receivers independently
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1003-1-5/8-10'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

32-48-160

Extension Spring 8' Door - 160 lbs Brown ** Replaced by 27-48-160

Double - Loop
32" long 48" stretch 160 lb load
Springs sold individually

Spec Sheet

26-40001

Truck Door Bottom Seal Standard 98" Long for Todco Roll-Up Doors

Extruded from long lasting rubber
Prevents dirt and moisture from entering cargo bay.
Cross Reference: T #80840 W #3257 610200

Z9997

Hand Chain 25' for Manual Chain Hoists

Not SAE rated.
Designed for approx. 35 lbs

Z9403

Coupler 1" Bore Adjustable Silver

Malleable Iron for strength
Set screws and jamb nuts installed
1" bore with 1/4" keyway
Thickness: 0.35"
Painted silver

SF175

Spring Fitting 1-3/4" Pair

Universal thread for use in either LH or RH wound springs.
A pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .2950".
Set screw installed: 3/8"-16 x 1" (2)
Fits 1" shaft
Winding bar hole 1/2"

.......more details

RN1127

Roller 2" Nylon 7" stem 11 ball White

White Nylon Roller Wheel Diameter: 2"
Working Length: 6.31" Overall Length: 7.25"
Box qty: 150 Box weight: 65.5 lbs (2-7-11 White Nylon)

MF00003

Micanan R.H. Phillips Machine Screw 4-40 UNCx1-1/2

crew to hold double limits

GM3T-BX

Genie Universal Master 3-Button Remote - 37344R

Three Button Master™ Visor Remote
This 3 button remote can be used with 3 Intellicode openers
Replaces all Intellicode Series I And Series ll remotes
Replaces 9 switch and 12 switch 390MHz Genie remotes
Works with all Genie model Gated Community Receivers
This remote will not work with 315MHz Canada 12 switches openers

.......more details

Programming Instructions Instructions de programmation

BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

Zinc plated
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 3-1/2" maximum
Good for use with 3" hardware

111502.0002

Overhead Electric Motor RHX 3/4hp 115V Single Phase

EXTANT

LiftMaster Coax Antenna Connection Kit JF

For use on Medium-Duty commercial operators only

Installation manual Manuel d'installation

41A5021-1M-315

LiftMaster Receiver Logic Board with Purple Learn Button *** Discontinued

For LiftMaster models: 1345 1346 1355 and 1356
For Chamberlain models: CG40D & CG42D
Replaces Reciever Logic Boards: 41A5021-1H-315 41A5021-4M-315 41A6135-1A 41A6148-1 and 41A6148-1A

41DJ002

LiftMaster Circuit Board with Plate for 8500

Board: Security+ 2.0 for DC Jackshaft Model 8500
5 year warranty

BK111/PR

End Bearing Plate Flanged Heavy Duty 8-GA 3-3/8" without Bearing. Sold as a pair

They have 4 slots surrounding the hole to accommodate a regular bearing (with flange).
A pillow block bearing could be used if needed
Includes (1) RH and (1) LH plate

16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

Double Angle Rails for doors up to 16' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 18' 11"

75-10359

LiftMaster Brake Pad

same as K75-10359
For MJ / HMJ and MT / BMT operators

.262-3-3/4-RH-C

Torsion Spring .262 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .262 ID: 3-3/4" Length: 12 ft

HAE00004

Linear Limit Switch Assembly

For LSO LDO LCO

HW-BRG-1

Lynx Bearing 1" x 2" OD

2 in total on a MCJH

SPR40B48X1

Sprocket 40B48 1" Bore 1/4" KW 2SS

48 tooth sprocket for #40 chain

P-8833T

Pulsar 3-btn 3-Door Transmitter 108817 318 MHz

Allstar compatible
Three channel transmitter
8 dipswitches 318 MHz

Programming Instructions

IP-MDSF

CDVI Point of Entry Exterior Multi-Tenant Flush Mount Video Intercom System

Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
IP54 (recommended to be put under a canopy or covering)
Operating temperature: -10C to 50C
Stainless steel panel

.......more details

IP-MONB

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System in Black

Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in black.
IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
Also available in white: IP-MON
SIP Server
Operating temperature: -10C to 55C
Call recording and built-in memory

.......more details

GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

21" panel = 4 grooves 24" panel= 5 grooves
COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
Minimize the heat transfer between the inside and outside of your garage.
LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
WOOD END BLOCKS Suitable to receive steel end caps
HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor

.......more details

BEA-10BODYGUARD-T

BEA Automatic Overhead Pedestrian Swing Door Sensor

Designed to provide threshold protection during the open state
Prevents a closed door from opening and an open door from closing when a person is in the detection zone.
Adjustments can be made with the BEA remote.
Installation height: 9' max (6'6" to 8' recommended)
Operating temperature: -22 F to 140F
Immune to electrical and radio frequency interference

.......more details

Installation Manual Manuel d-Installation

LPEXP

LiftMaster CAPXL Loop Detector Input Board

Automatically trigger a phone call to a guard or office when a guest arrives
Mounts inside of CAPXL
Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
Operating Temperature -20°F to 130°F (-29°C to 54°C)
Dimensions: 2.8” x 2.3”

XF600VAC7

LiftMaster 600V Transformer Kit 700

For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators

P-9931R

Pulsar 1-Channel Receiver 318 MHz

Allstar compatible
Single channel receiver
24V AC/DC
8 dipswitches 318 MHz

GD-STEND-24D-2

End Cap Steel 16G 24" Double 2" Thickness

Galvanized Steel 16-ga (1.42mm) thick.

XF208VAC7

LiftMaster 208V Transformer Kit 700

12-1009

PVC Strip 6" x .060 Standard Clear Smooth for Replacement Strip Curtain Sold per Foot

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

CHAIN061

Manaras #410 - 1R26P (Incl. 1 C/L) 13" Long

CAPXSHOOD

LiftMaster Sun Hood for CAPXS Black

Sun Hood exclusively for installing with Model CAPXS – Smart Video Intercom S.
Provides simple protection for the CAPXS touchscreen for better visibility when mounted in locations with direct sunlight.
Fully compatible with the CAPXSTK Trim Kit accessory and CAPXSTK Trim Kit with Postal Lock for a clean aesthetic installation.
Dimensions: 6.15” x 4.13” x 4.74”

E/BLOP/130

Automatic Systems Kit for Breakaway Arm BL229 Option ** Price by Quote Only

This is an option for the BL229 arm

SETR2641AM1AN-C

Erone 2-Channel Mini Transmitter Grey 433MHz Proprietary Encoding

Heavy-duty construction
Elegant & easy to carry
Light grey and blue base with grey buttons
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

CG-HOIST-DBLE-114

ControlGard Chain Hoist Double Compound 1-1/4" Bore

Cornell Double Compound hoists are designed for larger doors
Features an integral braking system that only moves when the user is actively pulling the chain

10TD900INDHH4

BEA 4-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

P-535T

Pulsar 3-btn 27-Door O/C/S Transmitter 318 MHz

Allstar compatible
Wall mount
OPEN-CLOSE-STOP 27 doors
8 dipswitches 318 MHz

Programming instructions

NIR-50-325-KIT

EMX Retro Reflective Photoeye Kit UL325 NC/10K Across NO Contact EMX-5255-K

Kit includes photoeye with hood reflector with hood and mounting bracket
Retroreflective configuration
NC and 10K monitoring
50 ft. operating range
Sensitivity adjustment
Wide range operating voltage

.......more details

041-0155-000

LiftMaster Safety Sensor Brackets 2021-Present

IMPORTANT NOTE: The new safety reversing sensor brackets are only compatible with the new safety reversing sensors (041-0136) and are NOT compatible with older style safety reversing sensors.
For safety reversing sensor brackets compatible with models pre-2021 refer to 041A5266-3.

G-21X13-134-W-GRD

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door White with Grids

For 1-3/4" thick door
With white grid (squares) on glass

50074

Doorlec Flashing Light Option for TCBOD 120 volts can be field installed

Light package with flashing relay

99119671

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T 200' Roll

1/4" T width
Used on Amarr Residential Open Back Doors and Classica models

236514

Wayne Dalton Res. Bottom Bracket Roller Holder RH

Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
Pins & Cotters Included
Top quality galvanized steel
Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
Sold as a single unit

110635.0001.S

Overhead Electric Motor RSX 1/2HP 115/208/230V 1-Phase

MA005

LiftMaster Gear Reducer 60:1

Replacement Gear Box (60:1).
Compatible with LiftMaster MADCBB MATDCBB MASTDCBB

684-33-106

Universal Bracket 2.25" x 2.5" x 24" w/ Plate 2"x12"

GTO-R5211

Nortek Retrofit Replacement Control Board Green

Replaces the R4211 replacement control board
Retrofit board with upgraded firmware that is compliant with UL 325 Version 6
Color is green
Compatible with the Mighty Mule FM500 & FM502
Compatible with GTO PRO 2000XL GTO PRO 3000XL GTO PRO 4000XL
Compatible with the old GTO PRO 2000 GTO PRO 2500 GTO PRO 3000 GTO PRO 4000 Swing Gate Operators

.......more details

108207

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" 100/Bag

Indented Hex Washer Head
7/16" Head
Max RPM = 2000

212I

Nortek Linear Indoor Flush-Mount Keypad

120 users
Single gang design
1 SPDT 2 amp relay and three 50mA negative voltage outputs
Optional 293 relay board converts 3 voltage outputs to SPDT relays
Indoor use only
Functionality mode: 212 232

.......more details

111503.0002.S

Overhead Gear Reducer 40:1 RHX

K23-34815-1

LiftMaster Stop / Reset Switch Black Face

For use with SL595UL Series heavy-duty industrial slide gate ops

JB-02

Miller Edge Junction Box Metal

For commercial overhead doors that use coil cords or retracting reels
Standard metal junction box with cover
Includes 1 x 90-degree connector 1 straight connector
Includes strain relief + 2 wire nuts + pop-out holes
For single-angle bottom bar of rolling steel door
Also compatible with sectional door

.......more details

834

Fasteners Open Eye Bolt 5/16 x 3-3/4 Zinc ***Sold Individually

LMTBUL

LiftMaster Monitored Through Beam Photo Eye w/ Heater Nema 4X

Tested and evaluated by UL and meet UL 325 requirements.
Long Range powerful beam provides reliable performance.
Sensing distance up to 90 ft.
Anti-Fogging Lens
NEMA 4X rated
Wireless network mode eliminates the need to wire between operators in dual-gate applications.

.......more details

Installation manual Manuel d'installation Product guide

RADIO-EM144

Manaras 144-Door Transmitter O/C/S 390 MHz

3-button O/C/S transmitter for144 Doors
LED Indicator Nema 1 Enclosure
Soft touch push buttons including a bright red stop button for easy identification
Compatible with Manaras Opera Rolling Code Series "100" Transmitters and receivers
Compatible with Manaras Operators equipped with Board 70 or external receiver Radio-RE901 and Radio-Kit004 & Radio-Kit005
Wall or Post mount

.......more details

Sell sheet

RADIO-RE901A

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

For Commercial/Industrial Garage Door Applications
Wall Mount
DIP Switch and Rolling Code Technology
Sixteen (16) Fixed Codes / Receiver
313 MHz & 390MHz Radio Frequency
Controls One (1) Door

.......more details

Programming instructions

ESM500

Erone 1200lbs Exterior Maglock Surface Mount Stainless

Exterior applications & High-traffic areas
Power requirements: 12/24VDC
Current Draw: 500mA @ 12VDC 250mA @ 24VDC
Monitoring sensor
Visual feedback (red & green)
Optional L/Z bracket sold separately: LZE500

.......more details

Installation manual

DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

Fraba DW3S-300 air switch 10008797-2
Normally Open Contact (NOC)
Screw Type Connector
Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
Housing: ABS Switch: PA6V0 Nema4
Normally Closed Contact achieved by adjusting the sensitivity screw

.......more details

Operating Instructions

ST101-BTM-WHITE

Lynx Bottom Panel White 10x24

Includes bottom PVC

K32-37560-3

LiftMaster Gear Reducer 28:1

This is a replacement Gear Reducer (28:1). Compatible with LiftMaster® HCTDCU Overhead Gate Operators.

2520-437-BT-YELLW

Linear Token Acceptor Yellow 12" x 10" Locked Outdoor Encloser

Available in Black White or Yellow
Stand not included

PRO-X_MOD-3HP

Micanan Explosion-Proof Modification N-7/N-9 for 3HP

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

LDCO850

Linear 800 Newton Smart DC Powered Garage Door Opener spott Wi-Fi Accept Both Belt or Chain Rail

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Remote compatibility chart