Devanco Canada - Get The Right Garage Door Opener‎ and Parts

276554

Overhead Door Ribbed Air Tubing 1" Sold by the Foot

Rubber tubing

MG00001

Micanan Ribbed Hex Nut 1/2" -13UNC

Used on PRO-GHC
4 required per operator

PRO-APTB-7511-U

Micanan 3/4HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

MD-00280

Sprocket 41B32 x 1" 1/4" Keyway 2SS 5/16 Small Hub

2 set screw 5/16

RS1311

Roller 3" Steel 11" stem Precision Bearing

Steel Roller Wheel diameter: 3" 11" stem length 7/16" stem dia

25-60100

Truck Door Fork Lift Plate

Steel Construction
Black E-coat finish
Allows use of fork lift to open door from truck bay or when loads shift against door
Cross Reference: T # 69131 W #1092
Dimensions: 18" long x 5.5" tall with 1.5" lip

MX00128-A

Micanan Clutch Pad 1-1/4" bore x 5" for PRO-GOHD *** No Longer Available

60-5441

Standard LED Dock Light 40" Yellow DL40-PLED

Use 80% less energy than incandescent or halogen bulbs
LED bulb included

30257T

Genie Coupler Screw Drive Units

Used for attaching the screw of Genie screw drive rail to the motor head.
This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
To check and replace that part remove the two screws holding the rail to the main power head
Mounts on rear of opener rail and fits in motor head.

GH-3-RH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Right Hand

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

APOW1

LiftMaster Transformer For Roboswing & Roboslide Gate Operators *** To extent of Inventory

Elite Robo plug in transformer was 18VAC now replaced by 25V California energy compliant
As of March 2008 transformer has been changed to a 25 VAC self resetting unit that is to be used as direct replacement for the old 18vac units

LITH-9V

Battery 9 Volt Lithium

785105

FAAC XP30 Photocells 30m Range Relay 785163

Hardwired pair of Photocell relays
30m Range
IP54
24v
Dimensions: 55 L x 78 H x21 D mm

MP-00008

Micanan Two-Door Interlock Modification

Only allows one door to be opened at one time

PRO-GH-10083U-L

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PP12X34.5

Base Plate 12" x 34 1/2"

12"x34.5" Base Plate Stainless Steel

Q013

LiftMaster Idler Pulley K75-50090

Toothless idler gear for use on SL 3000 operators
Includes bolt and sleeve.
Dimensions: 3.5" diameter 1-3/8 wide with 1/4 off set total width 1-5/8 with 1/2" x 2-7/8 bolt idlers sold individually

ALUM-431

Aluminum 24" x 100' Spool Bright White / Blanc Pur # 431

20% thicker than the aluminum sold in retail stores (0.022" )
Aluminum on the reverse side
Gentek # 431

Colour chart

C-24X12-134-W

Thermal Window 24" x 12" for 1-3/4" Cedo Door White

For 1-3/4" thick door

MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

SPST
2 mounting holes
Dimensions: 2.375 x 0.875 x 0.75 inches
Color: Light Gray
Intended for indoor use

720118

FAAC Latching Plastic Enclosure

Dimensions: 4.65" x 8.38" x 0.6"

ALUM-506

Aluminum 24" x 100' Spool Windswept Smoke/ Vent Fumee # 506

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 506
Reverse side is #431 Bright White

Colour chart

345

Cable Clamps Galvanized 1/8" 100/pkg

Galvanized malleable cable clip

GL-24-LED

Guide Lights for Loading Docks Amber LED 12-24VAC/DC 24-3/8" long Sold Individually

LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
Robust housing resists impact and corrosion.
Slim discrete design ensures little risk of damage due to accidental impact.
Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
Boards coated in water-resistant polymer for optimal protection from water and humidity.
24 LEDs per guide light

.......more details

ALUM-562

Aluminum 24" x 100' Spool Commercial Brown # 562

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 562
Reverse side is #431 Bright White

Colour chart

BK200

Flat End Plate with Bearing 5-5/8" 4-Hole Sold per Piece

8-gauge
Includes commercial-grade semi-precision ball bearing bearing
3" wide

WASHER008

Manaras Type A Plain Washer 5/16" Zinc Plated

Used on old MJH

BOLT027

Manaras Hex Bolt 3/8-16 x 1-1/2"

Used on old MJH

ALUM-801

Aluminum 24" x 100' Spool White / Blanc # 801

20% thicker than the aluminum sold in retail stores (0.022" )
Aluminum on the reverse side
Gentek # 801

Colour chart

5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

Pierced track

104083

Marantec Reference Switch for Belt and Chain Rails

This part works with the positioning tab and motor to determine the open & close limits of the actual garage door.

SF375-114

Spring Fitting 3-3/4" Pair (Long Ear) 1-1/4" Bore

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1-1/4" solid shaft
3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.

.......more details

DC2000SL

LiftMaster Power Backup *** Discontinued

Keeps traffic moving during a power outage
Opens the gate when power goes out to allow vehicles to enter or exit
When power is restored the gate will return to normal operation
Compatible with operators: SL3000UL

J751L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 115/230V 1Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

Installation manual Manuel d'installation Sell sheet Brochure

15-19478

LiftMaster Sprocket Assembly

For model H (2005-present)
48B32T with hub

RDGRNCARD

LiftMaster Warning Device Option Board with Red/Green Light Box

The Red/Green warning light card flashes a warning light for 10 seconds prior to the Timer to Close activating the door to close.
Advanced warning of the door closing helps prevent traffic collisions with the door
Controls both 24V & 110V traffic lights

Installation Manual

BG790-50-11

LiftMaster Industrial-Duty Wishbone Barrier Gate Operator 1/2 HP 115V Arm & Weight Included ***Must include Arm G651208R***

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
Standard Features: Control inputs and Adjustable limit settings
Includes a 24' arm

Installation Manual Sell Sheet

UNI-100-122

Uni-Size Bottom Weather Seal 12'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

22-460

Brake Solenoid 440-460V

Used on all brands of commercial door and gate operators
same as MK-00028

RELAY024

Manaras Relay DPDT 24VAC

Used in all heavy-duty operators as well as MLT and Opera-MH/MJ

27-48-130

Extension Spring 8' Door - 130 lbs Yellow

Single - Loop
27" long 48" stretch 130 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

PRO-HBH-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

14JW

Rolling Steel 3" Flat Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

Universal spring anchor brackets - Residential/Commercial
Centerline adjustment: 3-5/16" to 6-3/4"
Bright zinc plated 8 gauge steel
No bearing
Bearing R5110 sold separately

Q300

LiftMaster Traveler Carriage for Miracle-One**Discontinued

Replacement traveler carriage for Liftmaster Elite Miracle-1 model
Same as part no. K75-50341

41A5434-11

LiftMaster Full Belt Assembly for 7ft Door For Models 2001 and up

For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D

.319-334-R

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-375-Installed

86-RP08-108

LiftMaster Roll Pin Long 1/4" x 1-1/8" Coiled 10/Pkg (K-SPLONG)

Same as K-SPLONG

BRACKET112

Manaras Wall Mount Stud Bracket

This Wall Mount Bracket can be used with all Manaras Wall Mount commercial operators except the MRGH and MGH models
Will not work will Trolley Operators

756

Fasteners Slotted Track Bolt 1/4-20 x 5/8" 1000/Box *** Temp Unavailable *** Offer 734

Knurled shank
Max torque = 6

SSZP24

Solid Shaft 1" Keyed Zinc Plated 24'

370-3343

Stanley Magnet Assembly for Quiet Glide

K72-12506

LiftMaster Clutch Shaft Kit (1/3 & 1/2HP)

For 1/3 and 1/2 HP models - L5

K72-12515-1

LiftMaster Limit Switch Kit

For models T H Logic 5 and various L3 L4 commercial operators
Also known as: K75-12515-1 K75-12514

41DB001-1

LiftMaster Circuit Board Assembly

For belt drive unit model 3500 (315MHz)
Assembly includes: Board end panel and light socket
Also known as 041DB001-1C

41C168

LiftMaster Transformer

For model 8500
120V / 150 VA
24VDC output voltage
Also known as 41C0168 041C0168

41A6104

LiftMaster Cable Tension Monitor

Used on jackshaft model residential garage door openers

27-20100

Truck Door T-Style Spring Assembly 60" Long

Wire thickness: .24"
Inside diameter: 1.75"
Includes bolt plug and winding plug wound onto spring for stronger design
Cross reference: T#51042 W#2701

SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.

.......more details

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

M3-2312

Marantec 2-Button Transmitter 315 MHz 97243/122436

Same as part # 65892 97243 122436
Includes battery CR2032
Made in Germany

Instructions

25-01575

Truck Door Beverage Body Roll-Up Door Cable

Includes one (1) pair of cables
Zinc plated tear drop
Length: 110 inches
Cable eye: 1/4
Cable construction: 7 x 7 galvanized

ED-1300

Devanco Citrus Degreaser & Cleaner 425g

This special blend of solvents is designed to quickly and effectively loosen and dissolve grease oil and dirt from metal parts
Leaves no residue
Pleasant citrus scent

Material Safety Data Sheet Fiche Signalétique

SPREADER002

Chain Tensioner for 1" / 1-1/4"

Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

K29-32410

LiftMaster Alarm Kit for SL575/585/595

Kit includes Alarm Spacer and Faston

Installation Manual

.250-134-L

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

GK-BX

Genie Dual Frequency Wireless Keypad 37224R *** To Extent of Inventory

Temporary PIN codes to allow for one time special access needs
Able to operate up to three Genie Intellicode garage door openers
Auto-seek dual frequency technology automatically transmits in both 315 and 390 MHz
Compatible with Intellicode 1 and Code Dodger series

Programming Instructions

41A5021-1ATS

LiftMaster Circuit Board Assembly (41A5021-1HATS)

Board: Security+ 390 MHz
Assembly includes: circuit board and end panel
Also includes: 1 Multi-Function wall ctrl panel - 2 wire
For: ATS211 & ATS211R
For newer model ATS use replacement board 41A5021-9G-315
Same as 041A5021-1HATS

.......more details

AW-14

Miller Edge Air Wave Switch in ABS Box

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Molded enclosure
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm

.......more details

Instructions Manual Sell Sheet

TUBE_SHAFT_10FT

Hollow Shaft 1" x 10'-10" Galvanized 16 gauge

When ordering order one foot longer that actual door width

365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad
Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT

Programming Instructions Instructions de programmation

372LMC*

LiftMaster 2-btn Security+ Transmitter 315 MHz ****Discontinued - Replaced by 892LT**

Both buttons feature Security+ rolling code technology
Compatible with models manufactured from 2005
Second button can learn other shared Liftmaster radio-controlled devices.
Includes visor clip and Lithium battery CR2032
Obsolete as of 9/31/2012 - Replaced by 375LM 892LT or 894LT

71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

omplete disk brake assemble including 2-wire solenoid

Installation Manual

41A6095

LiftMaster Electric Motor and Bracket for 3800 / 8500

For models: 3800 3800P & 3800PLD
Also known as 002D1622

41AC050-1M

LiftMaster Electronic Circuit Board Assembly

Assembly includes: circuit board end panel and light socket
For chain drive units with one light
Fits 3245 & 3255
Also known as 41AC050-1 041AC050-1M

R-831-P

FL-Allstar 1-Door O/C/S Receiver 107480-311 MHz***NLA

This receiver comes in a metal enclosure.
It has three isolated contacts to open close or stop the door. If your operator can be controlled by three button station then our R-831-P receiver and commercial remote controls will work with your operator.
Manufacturer's model number: 190-107480
Dimensions: 9 1/4" x 6 7/8" x 1 1/4".

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

41A3489

LiftMaster Complete Trolley Assembly for chain drive

For chain drive models 1984 +
Compatible with Sears Chamberlain

Installation Manual

41DJ001

LiftMaster Circuit Board with Plate for 3800 3900 41DJ001B

Board: Security+ 315 MHz
For jackshaft models; 3800 3800P 3800PLD & 3900
Also known as 41DB001-2

Programming Instructions Instructions de programmation

41K4629

LiftMaster CPS Interface Black Box (CPICARD)

Allows CPS-U photoeyes to provide a 'NO' contact
Interface is included with CPS & CPS-N4
Also known as 041K4629 1C4489 41K4629 41C4489 CPI

.225_2-5/8"-RH

Torsion Spring .225 x 2-5/8" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 2-5/8"
Length: 12 ft

SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
2 NO relay + 2 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output Relay number 4 can be setup to latched output
Can be used for O/S/C
Power requirements: 12/24Vac/dc

.......more details

Sell Sheet Brochure Wireless System Chart

BRAKE011

Manaras Band Brake Assembly Kit

Does not include solenoid
Replacement brake kit for operators that are belt driven and have a brake. Works with OSH OTBH
Will not work with Gear-Head operators

Installation Manual

RADIO-28

Manaras MTM-1000 1-btn mini transmitter 313 MHz ** To extent of inv*** Repl. by RADIO-EM901

Open/Close mini remote for 1 door
Comes with LED battery life indicator
Mini 12V battery included
Key chain holder included

5377.115

Whiting Side Seals 1/2" Track Spacing 115" Long

Most common side seal for Whiting Dry Freight doors.
115 inches will fit almost every size door.

2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long Galvanized

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Curbside order part # 2705.162*180

HAE00023

Linear 7ft Belt & Inner Slide Assembly (HBT7)

7953

Whiting Truck Door Hinge Gasket White

1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1104-9FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

HSC-600-B

Bench Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Wire rope cutting capacity 3/16”
Made in Japan

28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

Z9002

Pusher Spring - 15" Sold as a Pair

Pusher spring 15" long with 6" travel. Sold as a pair

CBC316

Thimble 3/16" - 100 per pkg

RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)

4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep