Devanco Canada - Get The Right Garage Door Opener‎ and Parts

DWI-LOCK

Doorway Impact Monitored Slide Slock V2

Monitored Slide Lock for the DoorWay Impact Sensor (Impact sensor and air switch not included)
Connects to an Air/Impact switch to mechanically and electrically lock the door.

CP35

Roller Chain Puller 35-60

Allows chain to be pulled together for attachment of the master link
For 35 thru 60 chain

K41-0241-000

LiftMaster Transformer for IHSL24UL

Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators

41D3485

LiftMaster Chain Kit 10'

For use with various chain drive garage door openers that utilize a T-rail and have a 10' garage door
Same as 041D3485

S3HD-2

Coaxial Splitter 2-Way Female to Female Type F

A practical and efficient solution for dividing a signal from a coaxial source into two separate channels
Its careful design helps minimize signal losses thus ensuring optimal quality on each output
Frequency: 5 - 3000 MHz
Special order item price may vary depending on availability.

XF600VAC12

LiftMaster 600V Transformer Kit 1200

For use with various LiftMaster® MAXUM Series DC 1200 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators
will supply a maximum of 12.5 amps on 120volts

2110-236

Linear Shaft Output Assy HSLG Ups

K001A6407-1

LiftMaster Logic Board Absolute Encoder

Compatible with LiftMaster® Models RSW12V and RSW12VH Swing Gate Operators

DW-HOSE-CONN

Copper Air Hose Connector 3 x 22mm with Collar *** To Extent of Inventory

For use in DW-3S and DW-TR air switches

TDC7-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #48 chain pack (TDC48-16) ***Actual length 227"***

Double Angle Rails for doors up to 16'6" high
Includes #48 chain pack

6200-2-7-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 5.96" Long Stem

2" diameter white nylon tire
6200 sealed precision bearing
Zinc plated 7.04" Overall Length 5.96" stem
Rating: 100lb; 100000 cycles of a 12′ door

JDC7S1BMC

LiftMaster MAXUM Jackshaft DC Commercial Op. w/BBU 700LB

Max door height: 40 ft. Max. Sectional doors up to 700 lbs. Rolling steel or insulated doors up to 450 lbs.
myQ Compatibility: Setup available for either myQ or myQ Facility
Operating Temperature: Without Heater: -4°F (-20°C) – 140°F (60°C). With Heater: -40°F (-40°C) – 140°F (60°C)
Heater sold seperately
Voltage: 120V/240V (1PH/3PH); 480V (3PH); 208V & 600V (3PH) available with transformer accessory
Motor Power: 24VDC

.......more details

JDC7S1BMC_Installation-manual JDC7S1BMC_Manuel-installation Data sheet Fiche Technique Quick connect guide Guide de connexion rapide Ordering guide Sprocket recommendation

GALV-306-258-144-L

Torsion Spring .306 x 2-5/8" x 12ft LH Galvanized Red

Wire size: .306
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

IRB-4X2

EMX Nema 4 Through-Beam Photocells EMX-1250-1 Hood Sold Separately

The IRB-4X2 photoeye is used as a safety reversing or opening device in conjunction with automatic operators.
The IRB-4X2 will work with any control board that accepts dry contact on the input.
The easy to install IRB-4X2 is used with garage doors rolling doors parking barriers and other equipment.
*Not for use in applications requiring UL325 compliance
Thru beam design is not affected by shiny surfaces
Wide 24˚ transmission angle allows easier alignment and increases reliability

.......more details

Installation Manual Specification Sheet

41184R

Genie Transformer

Works with Overhead Door Infinity 2000 9020 & 9120
Works with Genie 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
Same as: 41184 41184R 41184R.S

DC7AH

LiftMaster Battery for MAXUM Integrated BBU DC Units 7AH

For use in Liftmaster MAXUM DC Commercial BBU ops
7 AMP
20 cycles when fully charged

JHDC7S1BMC

LiftMaster MAXUM Jackshaft 1/2HP 120/240V 1PH DC Operator 30 Cycles/Hour 700LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

JHDC_Installation-manual JHDC_Manuel-installation Data sheet Fiche technique Quick connect guide Guide de connexion rapide Ordering guide Sprocket recommendations

2100-1622

Linear Jam Nut 1"-14W 5/16 Tap Hole

2100-1650

Linear Plate with Solid Pin V Groove

LB710-14

Laminated Bumper Standard Black 10" x 14" 7" Projection Horizontal Installation ** Special Order

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

NINJA-001-BLACK

Rodent Ninja Garage Door Corner Guard Set

Blocks pests from entry
Fills in holes and gaps along garage door frame
Keeps insects mice and unwanted guests outdoors
Kit includes: (1) Right and (1) Left handed Garage Door Corner Guard (6) Self-tapping Screws
Made in the USA

GALV-363-334-R

Cut-to-Length Torsion Spring .363 x 3-3/4" Right Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

DC-ADAPT125-100

Dyna-Hoist DC Series Adaptor 1-1/4" to 1"

50-19503

LiftMaster Push to Open Bracket

Allows the gate to swing away from the property
To be used with LA400 and LA412 gate operators

Installation manual

227967

Linear Door Arm Bent LCO75

OHJ-6113-M-N1-RH

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph Monitored ECB w/N1 Photoeyes RH

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

301033

Whiting C-4 Zytel Roller Holder Black ** Price by Quote Only

DS-REPAIR-KIT

Inflatable Dock Seal Patch 30" x 30" Vinyl with Glue

DC1000-125

Dyna-Hoist DC Series Direct Drive Opener 1 HP 110/240V 1ph ** Price by Quote Only

The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
Comes with integral absolute encoder to control the door travel
24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
Nema 4 photocell

.......more details

Pulse Series Installation Manuals DC Series Brochure

MQ00011

Micanan 3/32" Aluminum Oval Sleeve Sold per Unit

RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

MSJ-6113-M-N1-RH

Manaras MSJ 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
35 cycles per day > 150 cycles per day

.......more details

81650

LiftMaster 1/2 HP AC Chain Drive Wi-Fi

Comes with 1 893LM remote and 1 882LMW multifunction control panel
1/2 HP AC motor with industrial-strength chain drive provides steady performance and lifting power.
Energy-efficient operation consumes up to 75% less power in standby mode.
Built in Wi-Fi for the easiest way to connect the garage.
Security+ 2.0™ safeguards your household – with every click a new code is sent to the garage door opener so that the door opens only for you.
PosiLock® locks down your garage door by electronically monitoring against a forced opening.

.......more details

81560 Installation manual 81650 Manuel Installation Product guide Guide de produit Receiver Logic Board Conversion List Comparison Chart

3-4734

Serco Bell Crank ** Price by Quote Only

For Serco loading docks

050ACTBMC

LiftMaster Receiver Logic Board AC WiFi

050ACTBMC is a replacement Bluetooth® Enabled Receiver Logic Board Kit
For use with various LiftMaster® and Chamberlain® Wi-Fi® AC Belt Drive and Chain Drive Garage Door Openers manufactured 2011 to 2022 only.
The unit will feature a yellow learn button
Also known as: 1D8088-1 050ACTWFMC 050ACTWF 1D8808-3 041D80881D8088-1 50ACTWF 050ACTBMC 50ACBL1 50ACBL2 50ACBL3 50ACBL4 50ACBL5 50ACCL1 50ACCL2 50ACCL3 50ACCL4 50ACCL5 50ACBR1 50ACBR2 50ACBR3 50ACBR4 50ACBR5 50ACCR1 50ACCR2 50ACCR3 50ACCR4 50ACCR5

50304

Doorlec Hoist Shaft Kit w/Disconnect Coupler

For models LJH LJHW

TS200-BOTTOM

ODCC Replacement Panel Bottom Section ** Color and Size to be Specified. Price by Quote Only

Special order item

PLA10

NICE Electric Gate Lock Vertical Mount 12V

Required for gates longer than 3m (9.84')
Vertical mounting
Possibility of manual opening
Power: 12V 15VA 50Hz

4580-304-CONT/BRN

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Contemporary Brown 458-70 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

MRIN

LiftMaster Base Riser Mount for industrial operators

Works with LiftMaster IHSL24UL and INSL24UL slide gate operators
Provides a base-mount option instead of post-mounting the operators

Installation manual Manuel d'installation Retrofit guide Guide d'installation

2704.156_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .156 x 2-3/16" x 18" Long
For Curbside order part # 2705.156*180

217483

Torque Force Extension Bracket for Spring Failure Device Long 2/pc Set

Zinc Plated Steel bracket
Use with 1" or 1-1/4" SFSD device
Includes M10 nuts and bolts
Dimensions: L=3.88" OFFSET = 6"

Installation instructions

O02R9000

AirLift Turnbuckle Complete

PRO-GHC-10011U-L

Micanan 1 HP 120V 1P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

RS-40

Roller Shutter Aluminum Model 40 Made to Order Pricing by Quote Only

The RS-40 is designed for use in window roller shutters door recesses and small shopfronts.
These profiles are of better technical performance and are thus more stable.
At the same time good coil diameters allow to use this profile in small-size boxes.
The foam filling ensures good heat and acoustic insulation.
Its low weight allows the use of manual drives spring- or electric control devices.
The RS-40 profile is available with or without perforation in a wide range of RAL-like colours.

.......more details

461-0004-12

Richard-Wilcox #31 Square Track 12ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75x14g

CAMPLATE012

Manaras Cam Plate MTH/MTBH N1

19-41010

LiftMaster Roller Chain #41 Stainless Steel 10ft/pk

10ft length

1634-134-W

Elton Commercial Window for Flush Doors 1-3/4" thick 16x34 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 35-1/8" x 17-1/8"
Cut-out size: 33-7/8" x 15-7/8"
Vision area: 31-3/4" x 13-11/16"
Different glass options and frame colours are available upon request

.......more details

87802

LiftMaster Elite Series HD 3/4 HP DC Chain Drive Wi-Fi with BBU

Drive system: Chain drive
Horsepower: ¾ HP Equivalent DC Motor
Voltage: 120V AC 60 Hz
Backup battery included for operation even when the power is out
Soft start/stop for smooth operation
Integrated Wi-Fi and Bluetooth

.......more details

87802 Installation-manual 87802 installation-manuel Receiver Logic Board Conversion List Comparison Chart

42208

Doorlec Z Bracket Control Cabinet Support - Front

Works with various models such as ETBHW ETHW

811LMX

LiftMaster 1-btn Dip-Style Transmitter Sec+ 2.0 Backward Compatible

LiftMaster Programmable DIP single-button remote control.
Programmable to be: Encrypted DIP Security+2.0 (811LM) - Default 315 MHz DIP (361LM) 390 MHz DIP (61LM)
Ideal for applications such as gated communities or commercial applications requiring a large number of remote controls for a common entrance.
Compatible for cloning with 892LT & 894LT Learning Remote Controls.
Easy to program to previous technology.
Battery: CR2032 •

.......more details

Programming instructions Instructions de programmation Product guide

FORK002-LH

Manaras Disconnect Fork Left hand

111087.0001.S

Overhead Transformer 120/208/240V - 1 Phase

works on various Genie ops ie GCL-GH

99119671

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T 200' Roll

1/4" T width
Used on Amarr Residential Open Back Doors and Classica models

4580-304-WHITE

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML White *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

CC-007

Skylink Chain & Cable Assembly for 7ft Door EQ Model Ops

Replacement chain & cable for rail

878MAX

LiftMaster Sec+ 2.0 Keyless Entry with Universal compatibility (MAX)

Features Security+2.0™ rolling code technology
One-button-to-close feature (works with all LiftMaster® garage door openers manufactured since 2006)
Temporary password option
Program code directly from keypad
Backlit keypad with amber LED
Includes 9V battery

.......more details

Programming instructions Instructions de programmation

210135

Skylink Chain for 7ft Door

Replacement chain for chain rail

K204A0276

LiftMaster Transformer 50/60Hz 200va 575V

Transformer (575VAC 200VA). Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators
575V/200VA
Sturdy housing canopy
External winding micro-tabs
Reinforced fastener flanges
Compatible with LiftMaster SL585105U SL585151U slide gate operators

.......more details

CPS-EI

LiftMaster 4-Wire Sensing Edge Interface

Designed to provide advanced safety and security to the door system in commercial environments.
This device is intended for use with LiftMaster Logic Commercial door operators and compatible with 4-wire monitored sensing edges.
This is a stand-alone reversing system and is not intend to be used in conjunction with any additional entrapment protection devices.
A junction box not provided is recommend to protect exposed wiring.
Compatible with Logic 5.0 Logic 4.0 Medium Duty Operators and Fire Door Operators.

SS-1-1/4-11

Solid Shaft 1-1/4" Keyed 11'-0" Galvanized ** To Extent of Inventory

Actual length is approx. 11'-0"

K79-13493-2-600

LiftMaster Logic Board Replacement Kit FDCL Firmware Version 600

Replacement board for fire door model FDCL

22253

Doorlec Flush Mount Key Switch O/C Tamperproof

Flush mount momentary-contact spring return key switch OPEN/CLOSE in TAMPER PROOF EEMAC 1 enclosure with gasketed aluminium cover.
Key removable at centre only.
Can open or close door.
Recommended applications: laboratories schools hospitals food processing plants or any other area where sanitary and high security condition are important.

PTM-24V

EMX 7 Day Programmable Timer 24V

The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
With up to 16 ON/OFF events per day and 15 different daily options.
Its DIN rail mount design and wide power supply options (12 or 24 Volt) make installation easy.
The battery backup saves stored programs in the case of power loss.
Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.

.......more details

Instruction manual Spec sheet Comparison guide

LA400PKGUL

LiftMaster Residential 24V DC Swing Gate Operator All-In-One UL325

LED DIAGNOSTIC DISPLAY Simplifies installation and troubleshooting.
WIRELESS DUAL-GATE COMMUNICATION Eliminates expensive conduit costs and unsightly driveway scars.
BI-PART DELAY Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
SYNCHRONIZED CLOSE Simultaneously closes gates. WITH OPTIONAL EXPANSION BOARD
PROGRAMMABLE AUXILIARY RELAYS Easily add additional features such as warning lights/alarms.
ANTI-TAILGATE Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up gate will continue to close.

.......more details

Installation manual Manuel d'installation Data sheet

30003

Doorlec Brake Solenoid 115V with wire leads

Works with all 115 Volt Doorlec Commercial and Gate operators

TTC-MODULE

Timer to Close Plug & Play Module

Adjust door closing times from 1 second to 5 minutes
Adjust pre-closing warning times from 2 to 5 seconds
Easy-to use "Plug and Play" connector
Make adjustments using the module's LCD display
Requires installation of monitored entrapment device
111114.500307

.......more details

10.1003.11

Whiting Step Bolt 1/4"-20x 1-1/2"

Used with keps nut #796 - sold separately
Ideal for installing hinges on dry freight doors

2528.087

Whiting Dual-Spring Shaft 87" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes pre-drilled
Cross Reference: For Whiting # 2376 balancer

3BXT-YELLOW

Replacement Button/Switch Only - Yellow

Replacement button for 3BXT

14-1056

PVC Roll 12" x .120" x 200ft Roll Low Temp Smooth for Replacement Strip Curtain

Clear and smooth. Suitable for most average applications.
Temperature Range: -34° C to 65° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

K75-10214

LiftMaster Straight Door Arm Kit

For use with various LiftMaster® Commercial Door Operators.
Complete kit includes: straight arm emergency rope with handle and warning label
Also known as: 41K3681 7510214 453405 75-10214 305105003 1C3681 1C3428

.262_6"-RH

Torsion Spring .262 x 6" x 12ft RH Red/Yellow

Wire size: .262
Inside diameter: 6"
Length: 12 ft
Special Order Minimum lead time 3 weeks

41A7442

LiftMaster Electric Motor w/Travel Module Belt Drive

For 8355 model opener

15-10885

LiftMaster Dual Sprocket 48B10/41A24

Also known as: G1510855 156016 G156016 15-10885 15-6016 71156016

HD8460-KYD-ALIKE

T-Handle Cable Lock System 1-3/8"- 2" ** Keyed Alike **

Complete cable locking system for a 1-3/8" or 2" door Keyed alike
System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
Also works for for 1-3/4" doors
T handle KA5 = keyed alike increment of 100 (5 different combination box (20 of each #)

CHC-SS-532

Chain Hoist Hand Chain Stainless Steel 5/32" Sold per Foot

Welded chain. Weldless chain is not available in stainless steel

12-4164

Flange Mount Bearing Self-Aligning

Works with SL575 SL580 SL585 SW470.SW470 gate operator
Same as K12-4164 124164

MF00003

Micanan R.H. Phillips Machine Screw 4-40 UNCx1-1/2

crew to hold double limits

029C98100

T-Style Complete Replacement Door White Stainless Steel Package 029C98100

Complete Replacement door size between 98" wide x 100" high
Painted white
Stainless steel package
Includes Vertical and Horizontal Track Operator assembly Hinges Rollers and Cable
Price varies according to size

787453

FAAC XT4 4 Channel Remote Control Transmitter 433RC ***discontinued

4 Channel
Visor clip & 12v battery included
Features programmable technology
Dimensions: 2" x 2.5" x .5"

D-67

Linear 1-Channel Digital Receiver 303 MHz

Designed for use in security systems and remote switching functions.
Typical applications for the receiver include adding a wireless zone a panic button or creating a remote arm/disarm feature for a hardwired alarm panel
Operates on 11-24 VDC or 12-16 VAC power
One channel
Standard digital format: 256 discrete codes
One form “C” relay output

.......more details

MTR3

Linear 3-Channel Visor Transmitter 318MHz ** To extent of Inventory

Activates three MegaCode receivers
Test/operate LED
Visor mounting clip supplied
Visor clip mounts vertical or horizontal
Power: One 2032 battery
Codes: 1000000+ (MegaCode format)

.......more details

Programming instructions Instructions de programmation

RADIO-EM144

Manaras 144-Door Transmitter O/C/S 390 MHz

3-button O/C/S transmitter for144 Doors
LED Indicator Nema 1 Enclosure
Soft touch push buttons including a bright red stop button for easy identification
Compatible with Manaras Opera Rolling Code Series "100" Transmitters and receivers
Compatible with Manaras Operators equipped with Board 70 or external receiver Radio-RE901 and Radio-Kit004 & Radio-Kit005
Wall or Post mount

.......more details

Sell sheet

CAMPLATE001

Manaras Cam Plate GH Standard

REDUCER030

Manaras Reducer CC63-40D Frame 56

STRUT-2-1/4-16'

Door Strut 2-1/4" Hemmed 16ft Long

Reinforcement bar 2-1/4"

165917

Marantec Wireless Wall Station

This device is compatible with any Synergy garage door operator as well as MLine openers with a 315MHz frequency
Program any button to operate the light function.
Completely wireless.
Extremely secure multi-bit code technology allows for an unlimited number of Marantec wireless wall stations.
Operate up to 2 Marantec garage door openers or other external devices.
Includes 3-volt lithium battery.

.......more details

SL595101UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 115/208/230V 1 Phase - Heater NOT Incl. Reflective photocell LMRRUL included

Power: 115/208/230 VAC. Single Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.
Security+2.0® on-board radio receiver: Up to 50 remote controls (unlimited with 811LM/813LM).

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Wiring diagram Wiring diagram 575V

41D9202

LiftMaster End Panel Driver Board ** Discontinued

041D9202 is a Front End Panel with LED Light Connector/Driver Board Replacement Kit.
For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
Compatible with the WLED model

25-60006

Truck Door T-Style Replacement Hardware Pkg Set**To Extent of Inventory

Package set consists of (2) 1" door rollers (2) T-style end hinges (2) T-style center hinges and 16 nuts 16 washers & 16 bolts
Zinc plated

Z9202

E-Z Ratch Kit Torsion Spring Winding System ** No Longer Available

Kit includes:
Two (2) - 21" Extendable Ratchet Handles (extend to a full 30" in length)
All-purpose commercial cone Gear Adapter (double-ended)
Six (6) Cone Adapter Pins One (1) 7/16" One (1) 1/2" Two (2) 5/8" Two (2) 3/4"
Mounting arm spacing allows it to be coupled to spring cone sizes up to 4 3/4" diameter
Compatible with 1” main torsion bar installations

.......more details

Operating instructions

K94-37848-1

LiftMaster Electric Motor 1HP

Replacement motor for SL595101U

BEA-10-BR3X

BEA Programmable 3 Relay Logic Module w/13 Functions

For use on automatic pedestrian doors access controls industrial automation and single-occupancy restrooms. •13 Functions Include:
Timer
Ratchet/Latching
2 Relay Sequence + Inhibitor
2 Relay Sequence + Door Position
Deactivation Timer

.......more details

Product guide

K002B0799-3

LiftMaster Cam and Lock Kit for EL1SS

Also known as: SNRLOCK 002B0799-3 SN6900110

PPLK1

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators