Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
821LMB-SENSOR

LiftMaster Extra Door Sensor for 821LMB Second Generation *** To Extent Of Inventory

  • This add-on door sensor works with the MyQ Smart Garage Hub to monitor and control a second garage door opener.
  • This version of the MyQ door sensor is only compatible with the new MyQ Smart Garage Hub by LiftMaster Model 821LMB.
  • Installation and Programming is easy: Mount to inside top panel of garage door and add to an existing MyQ account through the MyQ app
  • Not compatible with MyQ Garage (821LM)
MV-00029

Micanan 110V Commercial Receiver NEMA-4 CR32E-110V

TN29C

Wire Nuts (Marrette) Grey 22-14 AWG 100/Pkg

  • Screw-on connector
  • Wire Range: 22-14 AWG (Max = 1 x 14AWG wire with 1 x 20AWG wire & Min = 2x 22 AWG wire)
  • Rating: 105C (221F)
  • Voltage: 300V
  • Approval: CSA UL486C Listed
MV-00009

Micanan 3-btn O/C/S Nema-4 Pushbutton Control Station

  • Surface mount
  • Plastic Housing
MV-00005

Micanan PBC-3 3-btn O/C/S Nema-1 Pushbutton Control Station Flush Mount

  • Flush mount
ME110-2W-BLK-L

Miller Edge 2-Wire Black Left Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical pressure sensitive edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling that allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration.
    • .......more details
Worksheet
2X4PO50

Devanco Loop 2' x 4' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
25-60407

Truck Door Rear Frame Conversion Bulk Kit with 7" Header 2" Wide

  • Converts swing doors to roll-up doors by removing the old swing doors and weld conversion corner post and header in its place
  • Vehicle is now ready for roll-up door installation
  • Corner post has added lip length to allow easier weld during installation
  • Steel construction .125 thick
  • Each bulk kit includes two (2) corner posts and one (1) header
  • Plain finish
    • .......more details
PRO-APT-7581-U

Micanan 3/4HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
CBI-087

Wheel Chock CBI-087 Cast Ductile Iron

  • Cast Ductile Iron for Impressive Strength
  • Painted Yellow for High Visibility
  • Size: 8-1/4" wide x7-1/4" long x 8-1/2" high
M-30

Molded Rubber Bumper Black 30" L x 10" W 4" Projection 3-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 30" L x 10" W 4" Projection
    • .......more details
BB

Molded Rubber Bumper Black 24" L x 10" W 4" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 24" L x 10" W 4" Projection
    • .......more details
STATION080

Manaras 3-btn Push-Button Control Station with Key Lock-Out and Pilot Light Nema 4/12

  • 2 N/O contacts and 1 N/C contact for stop.
  • Surface mount.
  • Schneider Elect. part no. XALD04H7
LVB824-11

Laminated Bumper Black 8" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB812-24

Laminated Bumper Standard Black 12" x 24" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB412-24

Laminated Bumper Standard Black 12" x 24" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
38877R.S

Genie Non-Configured Circuit Board

  • Replaces the following models: 38001R1.S 38001R2.S 38001R3.S 38001R4.S 38513R.S 38514R.S 37470R1.S 37470R2.S 37470R3.S 37470R4.S 38334R1.S 38334R2.S 38334R3.S 38334R4.S
  • Compatible with Series II Controls and comes with only the circuit board
  • In order for this kit to function properly it is important that customers know the model of their opener.
  • If unsure as to what resistor needs to be remove refer to the instructions that came with the unit
MD-00005

Sprocket 410B12 3/8" NO KW 2 SS 1/4"

36190S.S

Genie Control Board 6-Terminal

  • Replaces board # 34514R # 20380R
  • 36190S.S is a six terminal board for use primarily with ML Chain Glide devices.
  • Replacement board for Chain Drive models: IC250B PMX300 PMX500 ICB and 496.696 CD/B
  • Replacement board for Chain Glide models: GCG350 GCG350L GCG350M PCG400 PCG450 PCG500ML PCG600 PCG650 H2000C OCG510 OCG550 OCG600ML OCG710 and OCG800ML
26CW94523-CUT

Truck Door Intermediate Panel (13" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
PRO-PL-20053

Micanan Wall Mount Control Panel Mod. Contactor 20" x 16" x 8" Stainless Steel Panel Nema 4/12

  • Standard features include B2 C2 wiring 24V controls Hinged cover Backplate Primary fuses in panel
XRS-02

Rodent Shield 2 x 8" x 1" Strips Peel and Stick Sold in Pairs

  • Prevents damage to garage door side seals due to gnawing rodents
  • Made of high quality stainless steel so it will not rust
  • Invisible from the exterior. Installs on the inside of weather strip - no painting or covering is required.
  • Easy installation. No tools required just peel and stick
  • An inexpensive solution to a common rodent problem around households
  • One size fits all. No need to measure or trim
    • .......more details
41B0873

LiftMaster Safety Sensor Sunblocker Kit Works With 41A5034 and 041-0136

  • This complete kit is used to shield sunlight and prevent accidental reversal of garage door from sunlight shinning directly into the safety sensors
  • Works with 41A5034
  • Same as: 041B0873 41B873
MU33-2WIRE-RH-Y

Miller Edge MU33 2-Wire NM Right Hand Yellow - Sold per Foot

  • MU style bumpers are designed for use with aircraft hanger doors and large specialty doors.
  • Must specify the exact length in feet and inches when ordering.
  • Mounts vertically or horizontally
  • Sensitivity: nominal 8-13 ibf
Worksheet
16-8002

LiftMaster Cogged Vbelt 4L330

  • Fits BG790 barrier gate opener
OCDFX2

Overhead Door 2-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX2.S GIDFX2.S
Programming instructionsInstructions de programmation
ANGLE-13G

Perforated Angle 1-1/4" x 1-1/4" x 10 ft 13 g Orange

  • 10 pieces of 10ft per bundle.
F3100MBC

Linear Wireless Keypad with Intercom Estate Series *** Disc

  • Increased Surveillance: Screen visitors and solicitors safely from inside your home
  • Superior Range: Crystal clear two-way wireless communication up to 500 ft. (152.4 m) without any obstructions
  • Stand Alone Keypad: Program up to 100 entry codes for added security
  • Motion activated backlit keypad
  • Kit includes 1 base station with rechargeable battery
2807.148.140

Whiting .148 x 2-3/16 x 14" Curbside with Cones

CRBH751L5-LH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
MK00710

Micanan Varistor Harness 575V with White Wires

MK00707

Micanan Varistor Harness 110V with Black Wires

NUT013

Manaras Jam Nut

41D96-1

LiftMaster Light Lens for 8500

  • Also known as: 108D96-1 41D96-1 108D0096-1
MK-00649

Micanan UL325 Monitored N1 Thru-Beam Photocell

UR2

3M Gel Connectors Red 26-19 AWG 100/Pkg ** To extent of inventory. Repl. by 703-004

  • Scotchlok Insulation Displacement Connector
  • RUS Listed Full featured
  • Max. Diameter Insulation: 0.082" (2.08 mm)
  • AWG Wire Range: 19-26 AWG Solid Wire
  • Angle: Straight
  • Operating Temp. : -40 to 285 degree F. (-40 to 140 degree C.)
    • .......more details
28-30081

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Roadside (LH)

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
  • 6" radius for smooth door operation
  • Track coupler used for proper alignment at track joints
CP-LX600

Lynx Thru Beam Photocell N1 - Replaced by FR-1000 Fraba

  • Used on the UL325 operators
PRECUT-GALV

Special Order Pre-Cut Galvanized Spring Made to Order

28018A-KIT

Genie Inner Slide Bullet and Retainer Kit Belt Drive

  • Kit includes part # 28018A and # 28019A
  • Fits Many Genie and Overhead Door Belt Drive Openers with C Rail
  • Includes 1 Belt Bullet and 2 Retainers
42RLU-4003B

Allen Bradley Retro Reflective Photoelectric Sensor Long Range 24V *** Discontinued

  • Infrared photocell
  • Sensing distance: 35ft
  • Output type: DPDT EM Relay
  • Operating voltage: 18-28V AC 20-32V DC
C-123-L

Aiphone Door Answering Intercom System

  • Door answering intercom system for home or business
  • Master room station: 7-1/2" X 5-1/8" X 1-3/4"
  • Door station: 4-3/4" X 3-7/16" X 1-1/8"
  • Power supply 6V DC 800 mA not included
BL-09

Barlock Kit Complete for 9ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (55-1/2")
Assembly Manual
KN-318

Skylink Wireless Keyless Entry

  • The Keyless Entry System is compatible with all Skylink Garage Door Openers.
  • Back-Lit keypad makes it easy to see the numbers even in the dark.
  • Weather-proof cover protects the keypad from wet and windy weather conditions.
  • Passcode Lock Timeout - Keypad will automatically lock for 10 minutes after ten incorrect passcode attempts.
  • Operated by one AAA Alkaline battery. •FCC/IC approved..
Programming instructionsInstructions de programmation
7001-10-CHARCOL

Commercial Side & Top Weather-Strip 10' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
41D7570

LiftMaster Light Lens (41D7572)

  • Also known as 041D7572 41D7571 41D7570 41D7572 041D7571 041D7570 041-0144
5001-WG-8-MOAK

Residential Side & Top Weather-Strip 8' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
MET-14500C

Cable Tie Metal Tooth 14" 50 LB Black 100/Bag

M4A

Safety Inertia Brake 1-1/4" Bore 3576 Torque PCM4AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
  • Fits 1-1/4" shaft
  • Normal Torque: 3576 lbf.in
  • Locking Torque: 17516 lbf.in
  • Made in Italy
    • .......more details
Reference manualTechnical dataSell Sheet
CS303-DB50

EMX Car Sense Direct Burial Sensor with 50 ft Lead Wire ** Replaced by the LRS-DB-50

  • Can be used for above ground applications ie.. strapped to a post or wall
  • Easy low cost installation
  • Small size of the detector allow for easy installation in pavement
  • Rugged sensor is also suitable for above grade installations
  • Includes direct burial sensor and 50 ft of lead wire
  • Advanced 3-axis technology for better detection
    • .......more details
1224-2-WHITE

Elton Commercial Window for Flush Doors 2" thick 1224 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
C-600-114-INSTL

Cones 6" 1-1/4" bore Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF600-114
CT501L5

LiftMaster 1/2HP 115/230 Volt 1Ph Com. Trolley Operator with Carwash Mod

  • New Logic 5
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
MU22-2WIRE-E-Y

Miller Edge MU22 2-Wire End Yellow - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
PRO-APTB-5011-R

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake Contactor

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
Installation manualSpecification sheet
41A4813

LiftMaster Chain Pulley Bracket Kit

  • Fits chain drive models
ST-ENDCAP

Soft Touch End Caps Sold Individually

109441.0002

Overhead Complete Limit Switch Assembly JST

  • Replaces part number 109441.0001
  • Replacement has 3 limit switches
CP-LX700

Lynx 1-btn Transmitter 372 MHz for Commercial Op with UL325 Board

  • Works on the UL325 commercial operators
  • Not compatible with the 372HMz residential operators
  • Works with on-board receiver on Lynx UL325 operators
  • Currently no external receiver compatible with this transmitter
Programming instructionsInstructions de programmationCompatibility chart
118798

Marantec Trolley Assembly (Slider)

  • Replaces #8030177 and #803178
  • Replacement trolley assembly for chain & belt rail assemblies
  • Fits Marantec opener models: M4500M4500eM4700M4700eQ7500Q7700
  • Works for 7' 8' & 10' high doors (red pull cord rope can be adjusted to length accordingly)
  • Note: will not work for the Heavy Duty (2mm-14ga.) rail assembly
  • Same part number as 91570
    • .......more details
TC134-14

Top Cap 1-3/4" 14 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
UNI-100-162

Uni-Size Bottom Weather Seal 16'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
UNI-100-122

Uni-Size Bottom Weather Seal 12'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
DXR-701

Linear 1-Channel Digital Receiver 315 MHz

  • A digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters.
  • When the receiver detects a signal from a transmitter programmed into its memory the relay output activates.
  • The relay has four optional output configurations.
  • 32 transmitter capacity
  • RF activity indicator
  • Quick-learn programming
    • .......more details
Installation Manual
111883.0001

Overhead Logic Board for RMX

  • Replacement circuit board kit for the Overhead Door RMX commercial operator.
  • Replacement circuit board for the Overhead Door RMX commercial operator. UL 325 2010 compliant.
  • This circuit board replaces part #110955.0001
MK00701

Micanan Smart 10.0 Full Feature Circuit Board Monitored with Heavy Duty Relays

  • For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
  • The board has P1 & P2 terminals
Instructions Manual
10-1000-10FT

Strip Curtain 10' x 24" Angle Mount - 8" LT PVC - 4" O.L Clear

  • 10 ft wide x 24" high
  • Mounting bar sold separately
50800P

LiftMaster Treadle Protection Plate **discontinued

K-LA400

LiftMaster Primary Replacement Arm Service Kit for LA400 Original Silver Arm

  • Replacement arm only - no stripes old style
IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

  • 1 ft L x 2" H x 3" W
RS10311

Roller 3" Steel 11" stem 10 ball

  • Steel Roller Wheel diameter: 3"
502-0022

Reversing Edge BEP 100C Air Tube 4" from End Edge Length 93.5"

H12G02-SS

Hinge #2 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
8030196

Marantec Belt Connector Kit

  • Works for all Marantec Belt Drive Openers
  • For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
  • Includes two connector pieces and four screws
  • Not for use on the heavy duty rails used by Q7900 & M4900e
WKP5LM3

LiftMaster Wireless Keypad 5-Code ** Replaced by KPW5

  • Wireless access control keypad
  • Same features as WKP250LM3
  • 5 code capacity - 4-digit codes
  • 2-way design with confirmation beep
  • 900MHz
Programming Instructions
SLT-17E

Rolling Steel 2" Flat Slat Clear Anodized

.273-1-3/4-LH-C

Torsion Spring .273 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 1-3/4" Length: 12 ft
44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 240 lb load
CPS-MEI

LiftMaster Electric Edge Card **to extent of inventory

  • The CPS-MEI is an interface for a monitored 2-wire edge that can be used in place of photo eyes and meets the monitored requirement of UL325-2010
  • Same as Miller Edge SM-102
1110197

LiftMaster Take Up Bolt 3/8"-16

  • Measures 3-15/16" Long
  • Also known as: G115015 1110197 115015 11-10197
71-B575-1

LiftMaster Internal Brake Kit 575V 3PH for L5 Operators

  • Complete with: Brake hub kit Brake release lever Brake disc Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Conduit
  • Can be replaced in-field
Instruction Manual
71-EB1PH

LiftMaster Field Install Brake Kit 115/230V 1PH for L5 Operators Ext. Mount *** To extent of inventory

  • For operators already in the field without a brake
  • No longer available but drum brake upgrade available #K71-D1PH
Installation Manual
OPH-6214-ECB

Manaras Opera-H 1 HP 240V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
SSNT-1

Super Sneaky Low Headroom Garage Door Hinge No Tabs Sold as a Pair

  • SSNT version designed to accommodate top panel struts. Eliminates troublesome & costly double track kits.
  • No tab design for doors with built-in or requiring a top panel strut
  • 100% effective in 6" headroom
  • Provides maximum headroom clearance & smooth operation
  • Self positioning easy install & works on all residential doors
  • Works with all draw bar type automatic operators
    • .......more details
35616R

Genie Dual Frequancy Intellicode Receiver Board

  • For models: PCG500ML PCG700ML GCG350ML 2020L
  • Works on 315Mhz and 390Mhz
831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming Instructions
10-10882

LiftMaster Chain Guide *** No Longer Available Sold only as a kit

  • Fits model H operator with Logic 5
  • This item is now only sold in a kit. To order use code K72-19979
20235R.S

Genie Replacement Keypad Only with Ribbon

  • Replacement keypad for KEP-1
41A3150

LiftMaster Terminal Block with Screws

  • For model 8355
  • Same as 041A3150
41DB001-1

LiftMaster Circuit Board Assembly

  • For belt drive unit model 3500 (315MHz)
  • Assembly includes: Board end panel and light socket
  • Also known as 041DB001-1C
CR-2149

Universal Photocells

  • Will work with all major brands of residential openers including: Chamberlain Liftmaster Craftsman Overhead Stanley Wayne Dalton Linear Raynor and Moore-O-Matic
  • The self programming feature allows you to simply hook up to the existing wiring
  • Suggested replacement for Stanley 49522 - must cut black wire
Installation Manual
PED4272

Pedestal Post 42" & 72" Dual Gooseneck Pad Mount

  • Black powder coat finish
  • Faceplate with universal hole pattern to fit almost any access device
  • 2" x 2" square post
  • Neck is bent with 6 in. center radius giving a tight professional look
19-50ML-NP

Master Link #50 Nickel Plated

02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

  • Code on key is #301
V300-TS

Top Seal Weather Strip 100 ft per Roll

  • For use with bottom retainers installed on top of door.
  • Vinyl: Black
50-107-30

Take-Up Reel 3-Wire Metal 30ft Extended

  • 3- wire 18-gauge
  • Also called Reel Cord
197LM

LiftMaster Wire Channel for T-Rail 5ft Replaces 27LM

  • Plastic channel attaches to the T-rail
  • Hides up to 3 pairs of wire
  • Each piece is 5ft long
  • Box quantity of 100
.225-134-L

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
37220R

Genie Replacement Safety Beam Set

  • Works on all Genie model openers including Legacy with 2-pin connector safety beams
  • Not compatible with openers made before 1995
  • Brackets and wiring included
  • Will work with all Genie and Overhead Residential openers that were manufactured with photo-eyes