Devanco Canada - Get The Right Garage Door Opener‎ and Parts

LC-36A

LiftMaster Light Curtain **discontinued

Must be used with a primary entrapment device and be installed along the vertical plane of the door.
Color-coded transmitter and receiver for easy identification.
Provides 36 in. of effective height coverage to increase the area of protection.
Multiple sets of LC-36A curtains can be mounted on a door providing coverage flexibility.
Maximum door width of 33 ft. ensures coverage for most commercial doors.
Eight (8) LEDs per side and 22 cross-beams produce an invisible curtain of infrared light for maximum detection capability.

.......more details

Installation Manual Manuel d'Installation Sell Sheet Connecting the lc-36A to a Non-LiftMaster Opener

H12G04-SS

Hinge #4 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H12G01-SS

Hinge #1 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

K75-12492

LiftMaster Brake Kit 115V Units MH

2JW-D064

Rolling Steel 2" Curved Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

7550

Whiting Winding Cone for 2-5/8" ID Spring Wire Roadside (LH)

A Whiting original

SLT14-22P

Rolling Steel 3" Flat Slat 22-ga Primed

342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

Standard size panel primer only

.343-6-LH-C

Torsion Spring .343 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .343 ID: 6" Length: 12 ft

.343-6-RH-C

Torsion Spring .343 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .343 ID: 6" Length: 12 ft

.312-5-1/4-RH-C

Torsion Spring .312 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 5-1/4" Length: 12 ft

.306-5-1/4-RH-C

Torsion Spring .306 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .306 ID: 5-1/4" Length: 12 ft

.295-2-RH-C

Torsion Spring .295 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .295 ID: 2" Length: 12 ft

44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

Clipped ends
44" long 60" stretch 240 lb load

BOARD066R

Manaras Replacement Power Board ***No Longer Available

Used on all Manaras circuit board type operators

Installation Manual Manuel d'installation Replacement Chart Guide de remplacement

RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 50000 cycles

RBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

IRB-BR

EMX Industries Brackets for Photoeyes Sold as a Pair

Brackets are predrilled
Used for PC-3 P41 P44 P45 and IRB-4X photoeyes
Made of metal
Sold as a pair
9" x 3" L-Shaped

IRB-SP

EMX Industries Liquid Tight Strain Relief Connectors Sold as a Pair

BK314

Jamb bracket J-14 #14 12 gauge

Sold by the piece
Height 5.50" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK311

Jamb bracket J-11 #11 12 gauge

Sold by the piece
Height 4.75" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK308

Jamb bracket J-08 #8 12 gauge

Sold by the piece
Height 4.00" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK304

Jamb bracket J-04 #4 12 gauge

Sold by the piece
Height 3.00" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

Actual length is approx. 16'-1"

SOLID_SHAFT_17'

Solid Shaft 1" Keyed 17 ft Galvanized

Actual length is approx. 17'-1"

SOLID_SHAFT_15'

Solid Shaft 1" Keyed 15 ft Galvanized

Actual length is approx. 15'-1"

SEL2641KITP8

Erone PC Software Kit for 800 User Receiver ** Discontinued

Serial cable for PC connection and software managing 800 users

2200-030

Linear Limit Nut

Used on various Linear Gate operators

8002-7FT

Side Weatherstrip with Black Rubber Bulb for Pedestrian Door 7ft Long

Aluminum and Black Rubber
Comes in 7ft lengths

SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

MOD050

Manaras Friction Clutch Mod. #50 Chain Gear Head Operators

Installed directly on the output shaft of the operator.
Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
Includes sprocket for #50 chain
Operator mounting side must be specified
A spreader bar cannot be used in conjunction with this modification
This modification applies to OGH and MGH operators

.......more details

OGH-6434-ECB

Manaras 1 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OTBH-6534-1-ECB

Manaras Trolley Operator 1 HP 600V 3 Ph with Electronic Circuit Board

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

Installation Manual Sell Sheet

OHJ-6233-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

OHJ-6213-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 240V 1 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

OPH-6214-ECB

Manaras Opera-H 1 HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

OPJ-6114-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 120V 1 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

37301

Reversing Contactor RM12 24VAC - ** NLA

No longer available.
Possible substitution # 37407

PPLK1-10

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 10/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 10 pack

.......more details

Programming Instructions Instructions de programmation Sell Sheet Brochure

1005-1-3/4-8'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

SETMCIC9V

Erone 1-Channel Wireless Module 433 MHz

You can replace the battery with a power supply by removing the SETMC1C9V battery adapter and connect the red (9V) and black (0V) wire into power supply
Connect a door contact motion detector or any relay activated devices to the SETMC1C9V it will communicate their status wirelessly
Works with any 433 MHz Erone receiver

Wireless System Chart

V1104-WHITE

Replacement Vinyl Only for 1104-White 200ft Roll

Sold in 200 ft rolls only

18004B

Genie Motor Start Capacitor 220VAC 50-60 MFD

Compatible with most 1/3 HP Genie & Overhead operators

27175B

Genie Carriage Slide Only

Carriage NOT included. Carriage part number 20462R
Compatible with Genie GPS and PMX belt drive models

20462R

Genie Carriage Release Assembly Belt Drive ** No Longer Available

Carriage slide sold seperately- part number 27175B
This carriage is used for Genie and Overhead chain and belt channel rails

34516R

Genie Chain Glide Inner Slide ML Series with Magnet

For ML Series with Magnet: 350ML 500ML 700ML 800ML

K204C0211

LiftMaster Torroid Transformer

Transformer replacement kit for use with various LiftMaster® Commercial Slide and Swing Gate Operators

02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

Single Pull Switch Control
Hazardous Area Overhead Mt. (NEMA 7/9)
Die cast hazardous area enclosure
May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.

.......more details

29-10338

LiftMaster Capacitor 70uf 230V 60Hz

For models: MJ5011 MH5011 HMJ5011 MT5011 and BMT5011

MH00015

Pillow Block Bearing 1" UCFL 205-16

C-600-INSTALLED

Cones 6" Factory Installed (Pair)

For do-it-yourself installation use part no. SF600

7001-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

CBS-338

Center Bearing Support 3-3/8" 8-gauge with Bearing Sold per Piece

Heavier gauge allows for use in both 2" commercial or 3" industrial applications
Sold per piece
For 1" shaft
Double clipped ends

SSZP24

Solid Shaft 1" Keyed Zinc Plated 24'

CAR2U-RPTR

LiftMaster Lear CAR2U Repeater *** No Longer Available

� The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.

Programming Instructions

H505L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

230/460V PRIMARY 24V SECONDARY 20VA

MOTOR254-WIRED

Manaras Electric Motor 1/2HP 120/240V 1PH Wired (MOD025A04)

Continuous-duty base mount 60Hz
This item is compatible with BRAKE011

K72-12508

LiftMaster Output Shaft Kit (1/3 & 1/2HP)

For commercial operator model T

Installation Manual

75-10170

LiftMaster Trolley-Slider Assembly (08-10169)

For LiftMaster trolley models MT T GT
Also known as: 307085008 75-10170 08-10169 085008 7510170

165-A

Fusible Link For Loads 1 to 30 lbs

Length is 2.625" width is .875"
Distance between centers is 1.75"
Priced per each
Fire rated at 165 degrees Fahrenheit

MX00037

Micanan Brake Assembly for PRO-J/H Solenoid NOT included

Brake assembly does NOT include the solenoid

D111904

Mitto B RCB02 2-Channel Transmitter

Compatible with Lux 2B gate operator

MK00785-RATED

Explosion Proof Killark Labeled 3-Btn Pushbutton Control Station

CSA and UL labeled station
Three button O/C/S Nema-7/9
Surface mount

CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
Polarized photo-eye design for a safe retro-reflective photo-eye system
Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
Range up to 30 ft - indoor use only
24VAC operation
Color: Yellow

.......more details

Installation Manual

41A6104

LiftMaster Cable Tension Monitor

Used on jackshaft model residential garage door openers

PULLEY014

Manaras Motor Pulley Standard 2" x 5/8" 5L/B

65-7WIRE-L

LiftMaster 7 Conductor Control Wire 500ft

20 AWG
Ideal for wiring CPS-RPEN4 photocells

580LM

LiftMaster Alternate Power System RJO Interface

Exclusively for use with Wall Mount Opener model 8500
Makes installing the Wall Mount Opener model 8500 easier when an outlet is not available within 6 feet
Puts power right where you need it and removes the need for an electrician
UL-approved
Includes transformer box interface box 35 feet of low-voltage wire and all required mounting hardware

Installation Manual Manuel d'Installation

480LM

LiftMaster Alternate Mounting / Extension Kit for 3800 3900 8900W 8500 8500W

Enables the opener to be lowered due to obstructed areas and low ceilings
lowers the operator by 6" requires 1-1/2" above the door shaft
Installs quickly and easily
Same as 480LMB
Compatible with wall mount opener 98032 and 98022

Installation Manual Manuel d'Installation

NTE5326

Bridge Rectifier 25A 600V

Bridge Rectifier Converts AC to DC voltage
For powering DC accessories when AC transformer present
Small size with convenient mounting hole in center
Same as MCCM2506-RH

Characteristics

24851

Stanley Traveler Carrier Kit

Works with all Stanley chain drive units from 1992-present
Same as part no. 9200014
Trolley slider for part no. 49563

Installation Instructions Instructions d'installation

12-000I

Secure Brands Keypad with Intercom Post Mount

Post mount with Intercom
RemotePro KP 26 bit wiegand output keypads
Available in three different mounting configurations: post single gang or flush.
All single gang RemotePro KP models are available with a silver aluminum faceplate.
A heavy duty metal keypad is used with all exterior models providing years of trouble free entry.
Post mount models feature a stainless steel faceplate in a heavy metal powder coated enclosure with nightlight.

.......more details

2598

Aluminum 5/16" Cable Eyelet

For use on Whiting dry freight and refer doors
Use with 1/8" stainless or galvanized cable

PED4272

Pedestal Post 42" & 72" Dual Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look

PED42

Pedestal Post 42" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look
Same as G559

78236

Marantec Modular Receiver 315 MHz ***available to extent of inventory see details***

Only available in 315 MHz. Be sure to check which frequency is required
Works with Marantec residential opener models 4500e 4700e 4900e
Replaced by 75424 plug-in receiver

358.000-PANEL

Whiting Bottom Panel White Aluminum Clad

Comes complete with #77W Lock
Actual replacement for Intercontinental-Winnipeg s/n 51617

GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

Replaces Series II GIT-1 GIT-2 & GIT-3
Battery Instructions Visor Clip Included
Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.

Programming Instructions Instructions de programmation

M8-705

Marantec Photoeyes 69190 / 97246

Works on all Marantec units
Includes brackets hardware and wiring
Same as item #86850 97246 used to be M4-705
Made in Germany

Installation instructions

SELWR433

Erone Wiegand Receiver 433 MHz

26 bit
12-24V AC/DC input voltage

Wireless System Chart

CARX-20

EMX Accessory Access Card 5404-1

3.4" x 1.2" x 0.1" (ISO standard size)
Reinforced for long life
Mifare 26 bit Wiegand Format
Durable access card for use on the CR-2000 and PRX-320
Easy and convenient use - just swipe in front of sensor
Secure and can be disabled individually at any time

.......more details

5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

7470.093

Whiting Side Seal for Insulated Doors 93" Long

Fits Coldsaver and Tempguard

02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

Die-cast metal enclosure
START may be used as OPEN with all LiftMaster operators.
May be used as OPEN and CLOSE on all operators with type B2 control wiring

GC-100

Devanco Foaming Glass Cleaner 538g

A powerful foaming glass cleaner goes on thick does not run and wipes off clean
Does not leave streaks or an oily film on the glass
Virtually odorless

Safety data sheet Fiche de données de sécurité

27096A

Genie Drive Gear *** To Extent of Inventory

Gear for Genie Chain Glide PMX Series and PCG Series
3-1/2 inch diameter nylon gear with square center hole
Square center hole is 7/16"

29-NP712

Lead Acid Battery 12V 7A

BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

Zinc plated
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 3-1/2" maximum
Good for use with 3" hardware

1013-1-1/4-24'

Rigid Vinyl Bottom Retainer L-Shaped 24' Long

For door thickness: 1-1/4"

7FT-RAIL-SCREW

LiftMaster 7' screw drive rail 3077SD

One piece rail

MGR-2

Linear 2-Channel MegaCode Gate Receiver 318 MHz *** To Extent of Inventory

Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Memory: storage for up to 40 MegaCode transmitters
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 1000000+ (MegaCode format)
RF frequency: 318 MHz

.......more details

Installation Manual

MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

The MGT is the industry’s only fully supervised gate safety edge transmitter.
It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
Features Include:
Signals access controller for stop or reverse when safety edge activates
No cables or coiled wires

.......more details

Programming Instructions