Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SPR40B48X1

Sprocket 40B48 1" Bore 1/4" KW 2SS

  • 48 tooth sprocket for #40 chain
1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
K10-10371

LiftMaster Straight Door Arm

  • Also known as: 105368 10-10371
  • For use with various LiftMaster® Commercial Door Operators; manufactured prior to 2005 only
2500-1495

Linear Pushbutton Stop/Reset

JHDC22X1BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 120/240V 1PH 60 Cycles/Hour 2200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
2376.200.35.930

Whiting Torsion assembly .200 wire size 35" spring length 93" shaft

Z9408

Coupler 1" Bore Adjustable Black 170634

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
  • Thickness: 0.50"
  • Painted black
WB-660

Skylink Wireless Wall Console w/ Auto Close for ATR Garage Openers

  • For use with the Skylink garage door openers.
  • Oversized Push Button for activating the garage door opener.
  • Activate opener light on/off and the light will remain on until the button is pressed again.
  • Feature with Lock function to ignore all radio signals for added security.
  • Illuminated LED indication.
  • Easy to Install.
    • .......more details
SUPPORT008

Manaras Board Support 1" ** Special Order Only

41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

  • Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H
PULLEY015

Manaras Double Pulley

TS-1-111-GALV-KEY

Tube Shaft 1" x 111 (9'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
041D0605-5

LiftMaster Electric Motor Kit Only DC

  • Also known as: 41D475-1 062525 41D605-5 041D0605
  • DC Motor Replacement Kit.
  • For use with various LiftMaster® Belt Drive Garage Door Openers; manufactured 2001 to 2005. The unit will feature a red/orange learn button.
SPR50B42X138

Sprocket 50B42 1-3/8" KW 2SS 5/16-18

  • 42 tooth sprocket for #50 chain
Z9959

Tension Release Hub Torsion Spring Back Winder

  • Safely back wind the torsion springs in tricky “slipped cable” situations
  • Easily slide and tighten the solid steel hub on either end of the torsion shaft to back wind the torsion springs using a 5/8" winding bar unwrap and re-install the cables on drum
  • Can be used on 1" solid or hollow shafts
07-8005

LiftMaster Crank Link Barrier Gate

  • Also known as: K07-8005 G078005
  • For use with various LiftMaster® Barrier Gate Operators
112357.0003

Overhead Logic Board for RSX 208 460 3PH

PB-001

Skylink Garage Door Wall Button

  • Install the Skylink Wall Button inside your garage.
  • Allows manual operation of your garage door opener.
  • Illuminated LED indication.
  • Easy to Install.
  • 30-foot Wire Included.
  • Mounting Hardware Included.
    • .......more details
PRO-HHD-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN) Specification Sheet
K41-0243-000

LiftMaster Output Sprocket IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators
IP-MONB

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System in Black

  • Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in black.
  • IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
  • Also available in white: IP-MON
  • SIP Server
  • Operating temperature: -10C to 55C
  • Call recording and built-in memory
    • .......more details
TDC48-08

LiftMaster Trolley Chain Pack #48 700LBS 8ft Door

  • Chain pack only
  • TDC48-08 is a #48 Chain Pack Kit for 8 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 8' commercial doors.
BCSI-PM03

Pivin Drapeau Hex Bolt 5/8-18 *** Price by Quote Only

10-LHB

BEA LZR Housing Bracket

  • Housing bracket for the LZR-H100 sensor
10TD900HH3

BEA 3-Button Transmitter 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • Operating temperature: -10 to 55C
  • IP65
GALV-343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-375-334-L

Cut-to-Length Torsion Spring .375 x 3-3/4" Left Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
CPT-215-50

Miller Edge Field Configurable Sensing Edge 50 ft Roll

  • For do-it-yourself edges on sectional or rolling doors.
  • Black extrusion flexible PVC conductive polymer Ends: Molded polymer
  • End plugs and mounting channel sold separately.
  • Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
  • When combined with the ME123 mounting channel ideal for 2" thick surfaces
  • Lead Wire 12 in. 22 gauge SJTO
    • .......more details
T/F-H/CHAIN-YELLW

Canimex Hand Chain 31.4 Yellow Zinc Plated Sold by Barrel Only 1000ft 173772

  • Yellow Zinc Plated Steel 31.4-19-4.55 sold in 1000' barrel
  • For use with specific Torque Force chain hoists ie 200R (244687)
  • This chain will NOT work in the hoists that use the 30.7-19-5 chain
  • works with Micanan / Nice Commercial operators
42GRR-9002

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

  • nput: 70-264VDC/AC
GALV-343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to RGH ops
    • .......more details
CP35

Roller Chain Puller 35-60

  • Allows chain to be pulled together for attachment of the master link
  • For 35 thru 60 chain
BEA-10BODYGUARD-T

BEA Automatic Overhead Pedestrian Swing Door Sensor

  • Designed to provide threshold protection during the open state
  • Prevents a closed door from opening and an open door from closing when a person is in the detection zone.
  • Adjustments can be made with the BEA remote.
  • Installation height: 9' max (6'6" to 8' recommended)
  • Operating temperature: -22 F to 140F
  • Immune to electrical and radio frequency interference
    • .......more details
Installation Manual Manuel d-Installation
PL-A26-LENS

Lynx Front Light Lens LPL 455+

44-60-160

Extension Spring 10' Door - 160 lbs

  • Clipped ends
  • 44" long 60" stretch 160 lb load
MWTA12B

Miller Edge Transmitter with Low Battery Alarm Small

  • The transmitter comes standard with a NEMA 4 weather-proof enclosure
  • Compact design that allow for easy troubleshooting.
  • The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
  • Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
  • Power Source: (2) 1.5 volts AA lithium batteries
  • Input: 2-wire N.O. sensing edge
    • .......more details
Installation manualSpec sheet
OGH-6536-M-N1-RH

Manaras 2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
5-38-10

2" Horizontal Track Set 8'6" (7ft Door) 10" Radius 16ga 2-pcs

  • Left/Right hand horizontal track set 10" radius
  • Garage Door Residential usage
2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

  • Fits HSLG GSLG-A Ups
RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
OPH-6212-M-N1-RH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Q521

LiftMaster Wiring Harness Kit CSW-DM K94-50287

  • Compatible with LiftMaster® Model CSW200UL Swing Gate Operators
  • Also known as: 94-50287 K94-50287
GALV-250-334-144-L

Torsion Spring .250 x 3-3/4" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-334-144-R

Torsion Spring .250 x 3-3/4" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

  • For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators
BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
BEA-10LIGHT-TR

BEA Modular LED Signal Light Segment Red

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
MOUNTSHAFT018A

Manaras Limit Shaft Kit MGH up to 1.5HP

  • For MGH MGT MGSL built from 2011 (Yellow C-Box) Limit chain size 410
0-205679

Linear Proxpad Plus Integrated Prox Reader and Controller w/Keypad

  • Prox.pad™ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
  • The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
  • The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
  • The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
  • By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
  • The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.
    • .......more details
15-50B22LGH

Sprocket 22 Teeth 1" Bore 1/4" Keyway w/SS

MT21-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Yellow Left Hand Outlet Sold per Foot

  • Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
BEA-10-IXIO-ST

BEA Presence Sensor for Automatic Sliding Doors

  • IXIO-ST is an effective versatile and easy-to-use presence sensor for automatic sliding doors.
  • It can be used for both clear door openings and side-lite protection
  • Precise infrared curtains coupled with visible alignment beams make the IXIO-ST extremely safe and easy to adjust.
  • This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.
  • Intelligent Solution :On board microprocessor optimizes data analysis monitors sensor performance and enables system integration
  • Mounting height: 6’6” – 11’6”
    • .......more details
510.1010.00

Whiting Custom Color Premium Topcoat Paint Option

  • Option for Dry Freight Doors
E/BLOP/130

Automatic Systems Kit for Breakaway Arm BL229 Option ** Price by Quote Only

  • This is an option for the BL229 arm
50450

Doorlec Mushroom Push-Button Red for 3-Doors

  • Capable of opening three doors
  • NEMA 4 Enclosure
GLASS-ONLY

Elton Sealed Glass Only Made to Order Quote Only

  • Thermal replacement glass only
GALV-207-2-144-L

Torsion Spring .207 x 2" x 12ft LH Galvanized Brown

  • Wire size: .207
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-363-334-R

Cut-to-Length Torsion Spring .363 x 3-3/4" Right Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
SEF2420

Erone Adjustable Infrared Photocell 20M (65ft)

  • Adjustable lens 180° right to left and 40° Top-Bottom
  • Range 20M (66ft) in all conditions
  • Adjustable Sensitivity
  • Power supply 12/24 Vac/dc
  • Operating temperature -20/+55 °C
  • Dimension: 90 x 60 x 60mm (3.5 x 2.4 x 2.4 inches)
    • .......more details
Wireless System Chart
50-19503

LiftMaster Push to Open Bracket

  • Allows the gate to swing away from the property
  • To be used with LA400 and LA412 gate operators
Installation manual
2376.200.30.870

Whiting Torsion assembly .200 wire size 30" spring length 87" shaft

NMTK

Linear MegaCode Wireless Keypad 318 MHz Grey

  • Wall-mountable backlit NMTK is a wireless MegaCode keypad
  • Requires: 3 AAA batteries for power
  • It can activate multiple MegaCode Receivers including Linear GDO’s and APeX equipped Gate Operators
  • User-selectable 1 to 6 Digit/Letter PINs
  • Programming is easy via the keypad; MegaCode receiver auto-learns PIN
  • Blue backlit keys for easy viewing
    • .......more details
Installation Guide (EN/FR)
TS125

Wayne Dalton Thermospan 125 Steel Panel

  • Wayne Dalton’s Thermospan® Model 125 sectional door features a foamed-in-place polyurethane core
  • Standard joint seal that provides a substantially higher thermal efficiency than industry standard polystyrene insulated doors
  • The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented roll-formed integral struts on each section making them the most rigid doors available
  • Thermospan® Model 125 is suitable for commercial and industrial applications.
XLSOLARCONTUL

LiftMaster Solar XL Control Box Battery/Harness Not Included

  • Includes LMRRUL Retro-Reflective Monitored Photoeye
  • Compatible with LA400 LA412 LA500
  • Does NOT include the battery or harness. A12330SGPLK sold separately
BCSI-PM504

Pivin Drapeau Limit Shaft Kit BCSI Gate Operator ** Price by Quote Only

  • Includes: Switch Shaft Bearing Plate
MC22-2WIRE-RH-BLK

Miller Edge MC22 2-Wire Non-Monitored Right Hand Black Includes Funny Flaps - Sold per Foot

  • Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty
Worksheet
DS-REPAIR-KIT

Inflatable Dock Seal Patch 30" x 30" Vinyl with Glue

OGH-6115-M-N1-RH

Manaras 1-1/2 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
DC1000-125

Dyna-Hoist DC Series Direct Drive Opener 1 HP 110/240V 1ph ** Price by Quote Only

  • The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
  • Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
  • Comes with integral absolute encoder to control the door travel
  • 24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
  • Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
  • Nema 4 photocell
    • .......more details
Pulse Series Installation ManualsDC Series Brochure
TRANSF168

Manaras Transformer 480X600-240V 60HZ 1500VA Leads Rapido

  • 480X600-240V 60HZ 1500VA LEADS
LVB620-11/P1

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB620-11/P1
BEA-10-IXIO-DT1

BEA Sliding Door Sensor

  • Dual technology motion and presence sensor combining microwave activation and infrared presence detection for the automatic sliding door industry.
  • This solution is highly flexible and user-friendly for sliding doors industrial doors vehicle gate detection and off-door automation.
  • Precise Presence Detection: Two 24-spot high-density infrared safety curtains providing precise presence detection
  • Easily Adjustable: Four visible red alignment spots are projected on the ground to assist in precise IR curtain adjustment
  • Standards Compliant: Fully monitored internally capable of external monitoring
  • Operating temperature: -13 to 131F
    • .......more details
BEARING007

Manaras Flange Bearing ID 1"

  • Flange bearing for 1" shaft
OGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
CRBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
041-0180-000

LiftMaster Wiring Harness Camera/LED Pod Dual Lens

  • This replacement kit is compatible with the follwoing models: 84501 84602 85702 85702 87504 87802 B4603T B4603TC B6713T B6713TCH B6753T B6753TCH
C12/5-BLADE

Felco Replacement Blade FC12/5 Single Blade

  • Single balde only for FC12 cutter
MSJ-6113-M-N1-RH

Manaras MSJ 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 35 cycles per day > 150 cycles per day
    • .......more details
DISCONNECT008

Manaras HDW Brake Release MTBH

OPH-6112-M-N1-RH

Manaras Opera-H 1/2HP 120V 1Ph Monitored ECB and Nema1 Eyes

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
1440-2-WHITE

Elton Residential Window for Flush Doors 2" thick Door 1440 White Frame Sealed Clear Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 42 5/16” x 14 1/4"
  • Cut-out size: 41 11/16” x 13 11/16”
  • Vision area: 39 11/16” x 11 5/8”
  • Different glass options and frame colours are available upon request
    • .......more details
89029.0040

Todco Carriage Bolt SS 1/4-20 x 1-1/4" Splined

OPH-6113-M-N1-RH

Manaras Opera-H 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
OSH-6113-M-N1-RH

Manaras Opera-SH 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
ETBH-353-1

Doorlec 1 HP 575V-3Ph Trolley OP

P-831T

Pulsar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming instructions
BTM-VB-3.25

Devanco Bottom Vinyl U-Rubber 3.25" Black 250' spool

  • 250ft spool of vinyl insert for sectional doors
  • low temp vinyl
  • perforations in the bottom to ensure that condensation escapes
  • Fits most standard bottom retainers
K41-0245-000

LiftMaster BLDC Power/Motor Drive Board IHSL24UL

  • Replacement Brushless DC Power/Motor Drive Board Service Kit
  • Compatible with the following models: INSL24UL INSL24ULMC
20.5359

BEA Harness IXIO with Relay 30ft

234-143

Serco 3/4" SAE Flat Washer ** Price by Quote Only

  • For Serco loading docks
P-733T

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 3 doors
  • 8 dipswitches 318 MHz
Programming instructions
P-8833TC-OCS

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • OPEN-CLOSE-STOP 3 doors
  • 8 dipswitches 318 MHz
Programming instructions
2528.084

Whiting Dual-Spring Shaft 84" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes pre-drilled
  • Cross Reference: For Whiting # 2376 balancer