Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
50800

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

  • Five feet long.
  • OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
  • The weight of the vehicle compresses an electric switch which sends an open signal to the door.
  • Requires a 2-wire connection to the operator but does not require power to function
41A5507-B

LiftMaster Receiver Logic Board for 2500 (390 Mhz) ** Discontinued

  • With end-panel
  • Also known as 41A5507 41A5507B
27-48-380

Extension Spring 8' Door - 380 lbs Gold

  • Single - Loop
  • 27" long 48" stretch 380 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-180

Extension Spring 8' Door - 180 lbs Gold

  • Loop ends
  • 27" long 48" stretch 180 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
PD180CBT30MU

Carlo Gavazzi Photoelectric Through-Beam Emitter 30M

  • Emitter only. If receiver is required order PD180CBT30Q
  • For Industrial doors and Gates
  • Range: 30M
  • Relay output
  • Supply voltage emitter: 2 x 3.6VDC lithium batteries
  • Dimensions: 180m x 51 x 49m
    • .......more details
Installation Manual
K72-33872-1

LiftMaster Limit Switch Shaft Kit

  • For models MT BMT MJ MH and MHS logic control
  • Kit includes: limit shaft limit nuts limit bearings limit sprocket washers compression ring roll pin and e-ring
23-10916

LiftMaster Hoist Interlock Switch SPDT

  • Interlock switch for LM commercial door openers with hoist disconnects
  • 15A 125/250VAC
LD-11B

EMX Base Socket 11-Pin DIN Rail Mountable Black Block Style

  • For use with D-TEK detectors
  • Special Order Only
  • Narrow profile
.363-3-3/4-LH-C

Torsion Spring .363 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .363 ID: 3-3/4" Length: 12 ft
Q222

LiftMaster Control Board for MIR-1 (K001A5868) ** NLA

  • For Miracle-One single operator - one arm
  • Same as K001A5868
41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

  • Fits square trolley rail only
  • Same as 183A163
BSG12-24LED

Devanco Stop and Go Light Black Housing 12-24V LED

  • LED Traffic Light Red/Green Dock Light
  • Weather-proof 2 piece housing with highest available UV rating
  • Wide input voltage range of 10-32V AC/DC eliminates the need to stock 12V and 24V models.
  • Ultra bright LED's for easy viewing in direct sunlight
  • Lenses measure nearly 4" in diameter
  • Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
    • .......more details
Installation InstructionsInstructions d'installationSell Sheet
K22-36900

LiftMaster Triple Phase Brake Solenoid L5

MX00147-OLD

Micanan Complete Clutch Kit for PRO-TB Old Style Frame

  • Before 2006
  • 9" Diameter
OGH-6432-ECB

Manaras 1/2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5

  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Installation ManualManuel d'InstallationSell sheetBrochure
CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

PPWR

LiftMaster Passport Receiver with Sec+ 2.0 Technology

  • LCD Menu Screen streamlines programming for easy set-up of facility codes and bit format.
  • Compatible with all Standard Wiegand Protocols providing control for the security and access of your property.
  • IP44 Rated Housing designed for outdoor environments.
  • Designed for outdoor environments
  • Can be programmed with 1- and 3-Button remote controls offering a variety of solutions to fit your specific application needs
Installation ManualManuel d'InstallationSell Sheet
PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Programming InstructionsInstructions de programmationSell Sheet
LA500HDTKITSTD

LiftMaster Torroid Transformer Kit

  • Powers gate from AC power-120V or 220V single phase.
  • Ideal for applications that prefer AC transformer run operator vs. battery run operator
  • Ideal for areas that experience temperatures below -4 F for extended periods
19-41047

LiftMaster Roller Chain #41 47 Pitch w/Link

  • For model T operators
  • Approx. 2-3 ft
VMD202-100

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
    • .......more details
Installation ManualSell Sheet
114

Lag Screw Hex Washer Head 1/4" x 1-1/4" 1000/Box

  • 7/16" head
  • Serrated
STAR450-390

LiftMaster Commercial Access Control Receiver 390MHz *** To Extent of Inventory

  • Rapid learn feature programs multiple transmitters in just seconds
  • Ideal for gated communities parking lotsand garages.
Programming InstructionsSell sheet
36-RWB-PAIR

Winding Bars Round 36" Set of 2

  • Cold rolled hardened steel.
  • Machined to 1/2" at one end with 5/8" outside dia. on the other.
  • Sold as a pair.
MOTOR254-WIRED

Manaras Electric Motor 1/2HP 120/240V 1PH Wired

  • Continuous-duty base mount 60Hz
  • This item is compatible with BRAKE011
MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

  • Base Mount motor O.D.P. FR56
  • Used on Micanan's T TB APT J EJ H EHJ HHD & SD
MOFR-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Receiver

  • Maximum sensing range is 20 meters
  • 11-Pin
  • 8 inch optical beam angle.
  • Waterproof for harsh environments i.e. water dust steam etc.
  • To be used with amplifier series S142
  • Supplied with 15 m of shielded cable.
    • .......more details
Installation Manual
28-32085

Truck Door 2" Vertical Track with Holes 95.00" Long for Whiting Roll-Up Doors *** To extent of inventory

  • Galvanized steel 14-gauge construction
  • Tabbed at both ends for proper alignment at track joints and to allow universal fit for both left hand and right hand frame sides.
  • Holes drilled to allow for faster plug weld installation to frame
  • For use with 2" diameter steel or nylon rollers
AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
  • Ambient temperature range: -49F to 180F
    • .......more details
Instructions ManualSell Sheet
15-50B18LGH

Sprocket 18 Teeth 1" Bore 1/4" Keyway

PRO-W_MOD

Micanan Nema 4/12 Modification

  • This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.
109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

  • Operates on 12-24 volts AC or DC power
  • One channel
  • Whip antenna
  • 3-foot antenna coax and bulkhead connector
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)
    • .......more details
Programming Instructions
MV00077

Interlock Switch for Sectional Doors

  • Mounts on the door track to prevent the use of the operator when the door is locked
41DJ002

LiftMaster Circuit Board with Plate for 8500

  • Board: Security+ 2.0 for DC Jackshaft Model 8500
  • 5 year warranty
.207_1-3/4"-LH

Torsion Spring .207 x 1-3/4" x 12ft LH Brown

  • Wire size: .207
  • Inside diameter: 1-3/4"
  • Length: 12 ft
R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

  • Commercial Open/Stop/Close receiver for one door.
  • If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
  • It is easy to set with its learn feature (no coding switch).
  • This receiver can accept up to 8 different operational codes.
  • Manufacturer's model number: 190-110554
  • Dimensions: 6 1/4" x 3 5/8" x 1 3/4"
    • .......more details
Programming Instructions
24-115-1

Relay 8 terminal 115VAC DPDT

  • For most operators with contactor
  • Will work on Liftmaster MH Lynx MCJH and more
CP-CRG-NEW

Lynx Auto Re-Connect Carriage 14-1/2" Arm Sold Separately

  • Will work on most brands of commercial trolley operators using 2" angle tracks.
OPH-6533-ECB

Manaras Opera-H 3/4HP 600V 3Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

  • This timer-to-close can be added to any Commercial garage door opener.
  • Use with RELAY022 (8-pin base) if required.
  • Schneider Elect. part no. RE88867215
Adding a timer
DOORARM001

Manaras Door Lifting Arm Assembly

  • Complete door arm assembly for all Manaras trolley operators.
RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 4 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
Programming Instructions - ECBProgramming Instructions - CONT
218014-02

Lamp Socket Assembly

  • For models LSO LCO LDO
4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
7001-8-BROWN

Commercial Side & Top Weather-Strip 8' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
25-42-150

Extension Spring 7' Door - 150 lbs Red

  • Double - Loop
  • 25" long 42" stretch 150 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-60

Extension Spring 7' Door - 60 lbs Brown

  • Double - Loop
  • 25" long 42" stretch 60 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
95-00116

Truck Door Rivet 1-1/4" Stainless Steel ** To Extent of Inventoy

  • Stainless steel construction
  • Round head design
  • Cross Reference: T #89217-0040
Z9404

Coupler 1-1/4" Bore Adjustable

  • Malleable iron for strength
  • With 2 jam nuts
  • 1-1/4" Bore with 1/4" keyway
DM120

Cable Drum High Lift 120" 5750-120 Pair

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
H11G08

Hinge #8 x 11 gauge

  • 11 gauge #8 hinge - 0.87 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G02

Hinge #2 x 11 gauge

  • 11 gauge # 2 hinge - 0.69 lbs
  • Bright zinc-plated
  • For use with 7/16" stem rollers
EP2982

Exhaust Port 4" with latch short barrel ** To Extent of Inventory

  • 4" inside diameter 1/4" sleeve with latch.
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
R5211

Cast Iron Pulley 5" with stud

  • 5" Cast Iron Pulley with double stud
  • cast iron pulley mounted on two pressed sealed bearings
  • Maximum cable diameter: 1/4"
4X16PO50

Devanco Loop 4' x 16' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
BK311

Jamb bracket J-11 #11 12 gauge

  • Sold by the piece
  • Height 4.75" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
50195

Doorlec Front Idler Assembly with Shaft 41B9 Oilite Trolley Models

  • Fits all Doorlec commercial trolley operators
  • Same as # 50190
CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

4X8SC50

Devanco Loop 4' x 8' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
ST18COP

Copper Stop 1/8" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL18COP
27-20300

Truck Door Cable Drum Roadside (LH) for Todco Roll-Up Doors

  • Cast aluminum construction
  • Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines left or right drum.
  • Holds up to 130" door cable
  • Cross Reference: T #59033-2 T #59129-2 W #4014 330000
60-6560-A-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Asphalt **** NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
CP-SH-58-1038

Lynx Complete Limit Shaft Assembly for MCJH

  • 5/8" x 10-3/8"
  • Same kit used for HDC except the HDC has 1 extra 5/8" space washer
25E10232

Truck Door Mounting Plate for Reefer Top Closure Bracket Black E-coat finish**To Extent of Inventory

  • Used with reefer top closure brackets 25-10230 25-10231
  • Black E-coat finish
Z9962

L5 Operator Mounting Bracket

  • Compatible with L5 Jackshaft operators
  • Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
  • Precise chain tension adjustments through the adjustment bolt
  • Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
  • Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
  • Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation
    • .......more details
788-037-2MX

Blue Giant Hold Down Assembly Rewind Style Compete

  • Holdown Aircraft Cable Rewind Style Blue Giant-Complete
02-401M

LiftMaster 1-Button Control Station

  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series Commercial Door Operator Applications
  • Sends the door to the full open position. Perfect for time sensitive situations.
OSH-6433-M-N1-LH

Manaras Opera-SH 3/4HP 480V 3Ph Monitored w/ N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
2807.200.280

Whiting .200 x 2-3/16 x 28" Curbside with Cones

PB-001

Skylink Garage Door Wall Button

  • Install the Skylink Wall Button inside your garage.
  • Allows manual operation of your garage door opener.
  • Illuminated LED indication.
  • Easy to Install.
  • 30-foot Wire Included.
  • Mounting Hardware Included.
    • .......more details
TM1-PLUS

Programmable Timer

  • 6 modes of operation : Delay on operate Delay on release Latching #1 Latching #2 Pulsing #1 Pulsing #2
  • Adjustable from 1 second to 4 hours with programmable dip switches LED status indicates when timer function is active
  • Microprocessor based / controlled clock for accuracy of 2%
  • Operates on a power supply of 12vdc or 24vdc
  • SPDT relay output : 5 amp 24vdc contacts
CRBH505L5R

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification****NLA

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: 70 milliseconds
    • .......more details
Installation Instructions MWT12BSpec Sheet MWT12BFAQ MWT12B
RENO-BX4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector

  • The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
Installation Manual Sell Sheet
BEARING033

Manaras 605 Ball Bearing 5/8"

10-8055

LiftMaster Counterweight Clamp for BG790

  • Also known as: G108055
OSH-6233-M-N1-RH

Manaras Opera-SH 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
OSH-6532-M-RH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored No Photoeyes

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
P-831T

Pulsar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming instructions
Q003

LiftMaster Chain Tensioner Bolt w/2 nuts K07-50637

  • This replacement kit is most commonly used to tighten the attached chain on the sliding gate
K41-0257-000

LiftMaster Harness Repl. Kit IHSL/ INSL24UL

  • Harness Replacement Kit. Compatible with LiftMaster® IHSL24UL & INSL24UL Series Industrial Heavy Duty Slide and Industrial Lite Duty Slide Gate Operators
BCSI-PM203

Pivin Drapeau Chain/Spring Tensioner BCSI Gate Operator ** Price by Quote Only

LRS-DB-50

EMX Direct Burial Sensor with 50 ft Lead Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes direct burial sensor and 100 ft of lead wire
    • .......more details
GT-100A

Skylink Garage One Receiver Rolling Code ***To Extent of Inventory

  • Automatic door closer: Never forget to close your garage door again.
  • Built-in timer from 2 minutes to 20 minutes will close the door automatically.
  • Audio warning when door is about to close.
  • Kit includes: Monitor Sensor model: GS-101 and Reciever GC-433R
  • Advanced Rolling Code Technology
  • Replaces your traditional wall button with Wall Console
    • .......more details
410-0003

Gateway Weather-Stripping 1-3/8" Gray For Roll-Up Door Tracks Sold per Foot

PC-3

EMX Infrared Modulated Photoeye Thru Beam

  • Thru beam configuration
  • LED alignment indicator simplifies installation
  • No calibration or sensitivity adjustments needed
  • Wide sensing angle for increased reliability
  • 30 ft. operating range
  • Housing: Black PVC * Not water tight
    • .......more details
SEL2641R433-C4P

Erone 4-Relay Stand Alone Power Receiver 433MHz

  • Up to 85 transmitter keys
  • 2 NO relay + 2 NO/NC relay (230Vac)
  • Self-learning memorization
  • Relays with Pulse step or delayed operating mode.
  • Power requirements: 12/24Vac/dc
  • Dimensions: 140 x 115 x 53mm (5.5 x 4.5 x 2in)
    • .......more details
Wireless System Chart
COVER047

Manaras C-Box ABS/PC Green Cover with STICKER079

  • Fits most Manaras models
HDSW24UL

Liftmaster Heavy-Duty Variable Speed Swing Gate Op. 24VDC Heater Not Incl.

  • Includes safety device LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflect
  • Features battery backup that provides up to 45 cycles or 120 days of standby power
  • Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
  • Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
  • myQ® Technology enables you to securely control and monitor your gate operator from anywhere
  • Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
    • .......more details
236514

Wayne Dalton Res. Bottom Bracket Roller Holder RH

  • Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
  • Pins & Cotters Included
  • Top quality galvanized steel
  • Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
  • Sold as a single unit
K23-20523

LiftMaster Interlock Switch 125/250VAC 3A N4

  • For use with various LiftMaster® Commercial Door Operators
111396.0002

Overhead Brake Kit Model RSX 3/4-1HP 3PH

MA005

LiftMaster Gear Reducer 60:1

  • Replacement Gear Box (60:1).
  • Compatible with LiftMaster MADCBB MATDCBB MASTDCBB
K94-37694-3

LiftMaster Electric Motor SL585U 1.5 HP

  • Replacement motor for SL585151U
E402-00-FM

Doorlec Ersce Utility Switch 6A/230V Roller Arm ** Indef. Delivery

  • Utility switch with a 'NO' and a 'NC' contact
  • Adjustable arm with roller
  • Made in Italy
MM00139

Micanan N-4 Cable Entry Tube

ME123-2M-BLK-U

Miller Edge Black Universal 2 -Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
VFOH5011

LiftMaster Variable Speed Front of Hood Op. 1/2 HP 120V with CPS-U

  • Front of Hood Mount for Rolling Steel Doors and Grilles.
  • Variable speed up to 12”/sec with smooth start/stop feature.
  • Floor level controls with intuitive menu driven interface.
  • Accepts: (30) 3-Button Remote Controls or (90) 1-Button Remote Controls
  • Accepts an additional 30 Wireless keypads and Unlimited Dip Switch remotes
  • Includes: 1 x Powerhead (with 16.5 ft. Integrated Hoist Chain) 1 x Controller 1 x Powerhead Mounting Bracket with Hardware 1 x VFD Cable (22 ft. Standard) 1 x Encoder Cable (22 ft. Standard) 1 x #50 Drive Chain 1 x 40-Tooth Sprocket 1 x LiftMaster Monitored Entrapment Protection (CPS-U Standard
    • .......more details