Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: 70 milliseconds

.......more details

Installation Instructions MWT12B Spec Sheet MWT12B FAQ MWT12B

XF600VAC12

LiftMaster 600V Transformer Kit 1200

For use with various LiftMaster® MAXUM Series DC 1200 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators
will supply a maximum of 12.5 amps on 120volts

41176R

Genie Shaft Assembly Kit 6070/6170

DC7AH

LiftMaster Battery for MAXUM Integrated BBU DC Units 7AH

For use in Liftmaster MAXUM DC Commercial BBU ops
7 AMP
20 cycles when fully charged

SEF2420

Erone Adjustable Infrared Photocell 20M (65ft)

Adjustable lens 180° right to left and 40° Top-Bottom
Range 20M (66ft) in all conditions
Adjustable Sensitivity
Power supply 12/24 Vac/dc
Operating temperature -20/+55 °C
Dimension: 90 x 60 x 60mm (3.5 x 2.4 x 2.4 inches)

.......more details

Wireless System Chart

NIR-KIT

Emx Industries Retro Reflective Photoeye Sensor with Reflector and Hood (5200-K)

Watertight packaging
Detection range: 30 feet
6 foot cord
Reflector Hood Bracket and mounting hardware Included
2 LED indicators
Sensitivity adjustment

.......more details

2200-294

Linear Plate Sprocket 41A36 1" Bore

LDCO863B

Linear DC Powered Garage Door Opener Accepts Both Belt or Chain Rail

Ultra-Smooth and Quiet Industry leading performance with variable speed operation soft start/stop and ultra quiet motor
Integrated Battery Backup Energy-Efficient LED Lighting Long life dimmable LED light panels included. Secure.
Responsive Remote Control Linear MegaCode remote controls operate over long range and employ high-security technology
Release the operator’s quick-disconnect trolley to open or close the garage door manually
Self-Diagnostic System: Confirms proper operation and alerts users both audibly and flashing the lights. In the event of a problem it pinpoints the trouble and alerts users by flashing the courtesy lights
Linear ® Smart App Advanced real-time monitoring and control of garage doors from any mobile device. * Assign custom access and permissions for up to 10 authorized users and schedule door and light operation.*Wi-Fi and internet connection required

.......more details

Remote compatibility chart

CPS-EI

LiftMaster 4-Wire Sensing Edge Interface

Designed to provide advanced safety and security to the door system in commercial environments.
This device is intended for use with LiftMaster Logic Commercial door operators and compatible with 4-wire monitored sensing edges.
This is a stand-alone reversing system and is not intend to be used in conjunction with any additional entrapment protection devices.
A junction box not provided is recommend to protect exposed wiring.
Compatible with Logic 5.0 Logic 4.0 Medium Duty Operators and Fire Door Operators.

FLOX2R/A

NICE Wireless Universal Digital Receiver 2-Channel 433 Mhz

Features step-by-step timer and anti-burglar functions.
Works with all standard gate operators.
Management of multi-user system through the unique personal code.
Uses BM250 memory which holds 255 codes.
Reception frequency : 433.92 MHz
Power input : 24V or 12V ac/dc ± 10%

.......more details

CHC-SS-532

Chain Hoist Hand Chain Stainless Steel 5/32" Sold per Foot

Welded chain. Weldless chain is not available in stainless steel

BLSI12

Pivin Drapeau Vertical Lift Barrier 1/3HP 120V 1PH 6.57A/5.65A

Specify length of arm required up to 12'
Arms made of 1" x 3" rectangular aluminum
Has a 150W heating element optional 300W is available
Operating temps: -40 degrees C to 50 degrees C
8 seconds opening/closing time
# of cycles: 750000

.......more details

PHOTO-070

Manaras Monitored Photoelectric Cells N1 Thru-Beam 45' Range

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 45 ft

Manual

SL585101UL

LiftMaster Industrial Slide Gate Op. 1 HP 115/230/208V 1 Ph Heater NOT Incl.

SL585UL features a heavy- duty industrial lockable metal cover.
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
Manual Disconnect when unlocked allows gate to be operated manually.
Quick Close and Anti-tailgate quickly secure property preventing unauthorized access.
Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
Automatic Solenoid Brake prevents the gate from being back driven.

.......more details

Installation Manual Manuel installation Brochure Sell sheet

Z9202

E-Z Ratch Kit Torsion Spring Winding System ** No Longer Available

Kit includes:
Two (2) - 21" Extendable Ratchet Handles (extend to a full 30" in length)
All-purpose commercial cone Gear Adapter (double-ended)
Six (6) Cone Adapter Pins One (1) 7/16" One (1) 1/2" Two (2) 5/8" Two (2) 3/4"
Mounting arm spacing allows it to be coupled to spring cone sizes up to 4 3/4" diameter
Compatible with 1” main torsion bar installations

.......more details

Operating instructions

E/BLOP/246

Automatic Systems Option DBK Fan Heater 120V-400W for BL229

50183

Doorlec Brake Assembly 575V

Brake assembly consists of solenoid drum shoes plate spring cover and fasteners
For all V-belt driven models that have brakes

XRS-02

Rodent Shield 2 x 8" x 1" Strips Peel and Stick Sold in Pairs

Prevents damage to garage door side seals due to gnawing rodents
Made of high quality stainless steel so it will not rust
Invisible from the exterior. Installs on the inside of weather strip - no painting or covering is required.
Easy installation. No tools required just peel and stick
An inexpensive solution to a common rodent problem around households
One size fits all. No need to measure or trim

.......more details

BUSHING055

Manaras Limit Shaft Bushing

TL-5000

Trailer Lock Lever 32-1/4" long Stainless Steel

Provides leverage to easily open shipping container doors
18-8 Stainless steel construction
Polyurethane coated handle
5.5 lbs.
32-1/4" long
Fits most modern container door handles

.......more details

T-931-MH

FL-Heddolf 1-btn Mini Transmitter P219-1K-311 MHz (New # T-931-MS)

Keystone-Heddolf miniature 1 button transmitter 311mhz
12 volt battery and keychain included
(9) 3-position dip switch format
Compatible with Keystone T-931-H and Allstar T-931 and T-931-M
Also known as FIR311DEK31K

Programming instructions

CT751L5

LiftMaster 3/4HP 115/230 Volt 1Ph Com. Trolley Operator with Carwash Mod

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

K74-18382

LiftMaster Hall Effect Sensor Assembly **to extent of inventory

Formerly 76-G0541 G76G0541
For SW470 with GL or S3 Board SW490 with GL Board

LIMIT025A

Manaras Single Snap-Action Limit Switch with 'S' Lever

For all Manaras commercial operators prior to 2000 - except light duty models
Can be used on Doorlec Lynx and others
Unimax (SPDT)

Limit Switch Chart

8030196

Marantec Belt Connector Kit

Works for all Marantec Belt Drive Openers
For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
Includes two connector pieces and four screws
Not for use on the heavy duty rails used by Q7900 & M4900e

CH501L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

719323

FAAC Steel Rack for Model 844 Operator

SG10-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Yellow Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.

.......more details

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

PRO-HHD-5011R-R

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Right Hand (PRO HHDR)

1/2 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Electro-Mechanical Control Circuit (non-circuit board model)
3-btn open/stop/close (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation

.......more details

Installation manual Specification sheet

78LMC

LiftMaster Wall Control Panel

Wired multi-function control panel
Push-button is illuminated for convenience
Includes an adjustable light timer
For use with opener built January 1995+
Has a lock feature to cancel all radio control signals
Also known as: 945CB 41A6318 041A5273‑2 012381463183 41A5273‑14 041A6318

.......more details

Installation Manual Manuel d'Installation

02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

Code on key is #301

MDR-2

Linear 2-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates two devices
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

PHOTO-061

Manaras Monitored Photoelectric Cells N4X (Fraba)

Monitored NEMA 4X enclosure through-beam type photocell
4-Wire
Suited for industrial environments
Range: 45 ft
Supplied with 3ft of wire

Installation Manual

ER4

Carlo Gavazzi Reflector 3-1/4" (84mm) Round

Can be used with the PMP12RI retro-reflective detector
Can be used with the reflector hood
Dimensions: 84 mm wide 7.4 mm thick

71-B120H

LiftMaster Interior Brake Kit with Cable 115V (Logic 3 4 and Models)

Interior mount brake kit for operation with chain hoist
Works on mechanical operators as well as logic 2 3 4 and early logic 5 motors.

Instruction Manual

VBELT_4L310

Lynx VBelt 4L 31" (4L310)

Fits the old Lynx 455 garage door opener

877LM

LiftMaster Sec+ 2.0 Keyless Entry

Features Security+2.0™ rolling code technology
One-button-to-close feature
Temporary password option
Program code directly from keypad
Backlit keypad
Includes 9V battery

.......more details

877LM Manual

BRAKEPART019

Manaras Brake Band Assembly (Standard Brake)

Replaces BRAKEPART017 SHOE008
To use on brake drums with edges (DRUM004)
New part number is BRAKEPART019KIT

Installation Manual

AK-11

Linear Exterior Digital Keypad (ACP00748)

Self-contained keyless entry system ideal for airports hospitals warehouses office buildings parking lots and many other commercial facilities
Rugged cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
Four independent outputs and timers: two form C relays and two solid-state open collector outputs with unique programming per entry code
Up to 480 programmable input codes of one to six digits each for activating either or both relays
Two LED indicators show system status
Key operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockout

.......more details

Programming Instructions Instructions de programmation

26-40402

Truck Door Reefer Side Seal 98" Long for Whiting Coldsaver

Co-extruded using PVC backing with flexible PVC seal against the door.
Cross Reference: W #7470

RN0024

Roller 2" Nylon 4" stem Black

Black Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.75"
Box qty: 250 Box weight: 58.2 lbs (2-4 Black Nylon)
No bearings in head

IRB-4X

EMX Industries Nema 4 Through-Beam Photocells with Hoods *** No longer available

Outdoor and carwash through beam Commercial Photocells.
Up to 115' sensing distance
Electronic sunlight filter
Automatic compensation for temperature changes
12 to 24VAC/DC input voltage
one form C relay (NO and NC output)

.......more details

Installation Manual Sell Sheet

E/BLOP/103

Automatic Systems Keyswitch

Locks barrier in an open position (captive)

CPS

LiftMaster Commercial Protector System Eyes

Universal commercial photo-eye kit for indoor use
Interface box allows CPS to work with all operators
24 volt AC/DC supply voltage
Mounting hardware included
Sensing distance of 30 feet
Receiving Eye - A: 001D6857-1 Sending Eye - A: 001D6857-2

.......more details

Installation Manual

DR4

Linear 4-Channel Delta3 Receiver 310 MHz *** To Extent of Inventory

Activates four devices or UP DOWN STOP for one commercial device
310 MHz 8 dip switch
Power: 24 VAC/VDC
Dimensions: 4.9" W x 4.2" H x 1.3" D
Same as DNR00023A or DR4V

Programming Instructions

811LM

LiftMaster 1-btn Dip-Style Transmitter Sec+ 2.0 ***No Longer Available

Extreme range 1-btn encrypted DIP style remote control.
Easy to code 12 position dip switch offers up to 4 096 codes.
NOT compatible with the new Liftmaster 8550 and 8360 garage door openers.
Compatible with the 850LM Universal Receiver.

Programming Instructions Instructions de programmation Sell Sheet

JHDC7S1BE

LiftMaster MAXUM Jackshaft 1/2HP 120/240V 1PH DC Operator 30 Cycles/Hour 700LB long output shaft

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

31226

Doorlec Sprocket 41B48-1" shaft

D1101KH-C-S-SSV2A

Doorbird Classic IP Video Door Station Stainless Steel Surface-Mount

Video intercom including surface mounting housing
Keypad Module: Configurable via App Up to 500 individual PIN codes Individual events (e.g. trigger a relay HTTP(s) request)
LAN connection (PoE compatible)
2-Way audio
Ultra-wide angle lens HD video 1080P night vision IR LEDs
4D motion sensor

.......more details

Sellsheet

D1101KH

DoorBird Surface-Mount IP Video Intercom SS V2A Brushed

Video intercom including surface-mounting housing
LAN connection (PoE compatible)
2-way audio
Ultra-wide angle lens 1080p night vision IR LEDs
4D motion sensor
Keypad

.......more details

D1101KH_Installation_Manual Sell Sheet

PHOTO-065

Manaras Monitored Photoelectric Cells N4X Retro-Reflective 5-50' Range

Monitored NEMA 4X enclosure retro-reflective type photocell
2-Wire
Suited for harsh environments
Range: 5-50 ft

Manual

LDC801

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail (LDCO801)

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Remote compatibility chart

27035

Doorlec Elect Motor 1 HP 208V 1 Phase base mount TEFC

For V-belt and worm gear reducer driven models

MA005

LiftMaster Gear Reducer 60:1

Replacement Gear Box (60:1).
Compatible with LiftMaster MADCBB MATDCBB MASTDCBB

MLC-K72

Miller Edge Light Curtain Monitored 6ft Pulsed

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing
Operating temperature: -40F to 140F

.......more details

Installation manual Sell sheet

K32-37560-3

LiftMaster Gear Reducer 28:1

This is a replacement Gear Reducer (28:1). Compatible with LiftMaster® HCTDCU Overhead Gate Operators.

27222A

Genie Sprocket Bushing *** To extent of Inventory

For Genie Chain Drive or Belt Drive Channel Rails.
Fits the following models: PMX700 PMX1200 GPS00-IC GPS1200-IC
Available to extent of inventory

MS-00002

Micanan Trolley Track Set 12 Ga. 9'6" (for 7' h. door) Includes 2 Angles Only

Set includes 2 tracks only
Chain NOT included

M-30

Molded Rubber Bumper Black 30" L x 10" W 4" Projection 3-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
30" L x 10" W 4" Projection

.......more details

BB

Molded Rubber Bumper Black 24" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
24" L x 10" W 4" Projection

.......more details

210106

SkyLink Trolley for T-Rails

M3-2314-WHITE

Marantec 4-Button Transmitter Glossy White 315 MHz 122989 *** Price by Quote

Visor mount
Includes battery CR2032
Made in Germany

KEYSWITCH019

Manaras Single Key Exterior O/C with Stop Button Return to Center Surface Mount

Cast iron end Tamper-proof

CHK-991

Chain Hoist Keeper

Chain hoist keeper is not the same as the chain keeper

30257T

Genie Coupler Screw Drive Units

Used for attaching the screw of Genie screw drive rail to the motor head.
This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
To check and replace that part remove the two screws holding the rail to the main power head
Mounts on rear of opener rail and fits in motor head.

36051R

Genie Replacement Carrage Assembly

For Genie belt drive garage door opener model 2040L

XR-1

Linear Single Channel Mid-Range Receiver ** Discontinued

1-channel mid-range receiver
Up to 10 miles line-of-sight range (with XT-1 & XT-4)
Up to 2 miles of line-of-sight with handheld devices
Over 64 000 codes
Weather-resistant case
RF frequency; 27.255 MHz

.......more details

4059GY-216

Garex Thermo Moulding 3/4" Beading Gray 18ft

White and Black also available

K32-10540

LiftMaster Gear Reducer 20:1 SL595

Same as 32-10540 32-55011 32-5501-1 G3255011

38066R

Genie Series II Intellicode Wall Console GBWC2-BX ** Disc. replaced by 39165R

Series II Multi-Function Wall Console (White Color)
Vacation Lock button disables remote access
Light Control Button
This item has been discontinued and replaced by #39165R

CR-2

Battery CR2 3V Photo Lithium Battery

Camelion brand

BL-10

Barlock Kit Complete for 10ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (61-1/2")

Assembly Manual

39165R

Genie Series II Wall Console

Three-function wall console with backlit panel that is easy to locate in the dark.
Sure-Lock mode allows you to lock-out the keypad and remotes for extra security at night or while on vacation
When Sure-Lock™ is ON and the garage door is in the fully closed position the powerhead cannot be activated by the wall console or a remote.
Same as GBWCSL2-BX

MET-14500C

Cable Tie Metal Tooth 14" 50 LB Black 100/Bag

K001D8395

LiftMaster Logic 5 Board Kit - all voltages L5

The K001D8395 is a 1 Phase and 3 Phase L5 logic board replacement kit.
This kit is compatible with LiftMaster® 3 Phase Commercial Door Operators manufactured after April 2016 only.
This L5 logic board is Current Sense compatible.
All 3 Phase operators made after April 2016 will require this board.
For 3 Phase operators that require the Current Sense Harness use part number K21-38158

Product bulletin

MEA2

Nice Key Unlock System for Older Metro Gate Op.

For underground gate operator
(1) MEA2 KEY UNLOCK SYSTEM (2) KEYS- METROPLEX & BIG METRO
Does not work on the newer systems. For newer Big Metro use BMA3 lever type release

85870WL

LiftMaster Elite Series 3/4HP AC Chain Drive Wi-Fi Lock Garage Door Opener (8587WL)

MyQ® Technology now with Wi-Fi enables secure monitoring and control of your garage door opener with a smartphone tablet or laptop.
P3™ Motors provide proven reliability and durability.
¾ HP AC Motor Chain Drive System is built to provide maximum power to lift the heaviest doors including carriage house and solid wood.
I-Beam Rail System and reinforced chassis with chain drive provides maximum support.
Security+ 2.0® safeguards garage access – with every click a new code is sent to the garage door opener ensuring the door does not inadvertently open.
Timer-to-Close automatically closes the door after a pre-programmed number of minutes.

.......more details

Receiver Logic Board Conversion List Comparison Chart

HTR

LiftMaster Heater Kit for DC Pad mount Gate Operators

Heater kit for pad mount DC gate operators.
Includes battery bracket.
Protects system to -40° F and installs on operator frame
works on 120 or 240 VAC.

Installation Manual Manuel d-Installation

ZZ36767890

Rolling Service Door MDL 922 22-Ga 8' x 8'

Standard Max Width 14 ft
Standard Max Height 14 ft
Steel aluminum or stainless steel construction
Flat or curved slats available
Wind load 20 PSF standard; options up to 31 PSF
Non-Insulated

.......more details

41DJ001A-390

LiftMaster Receiver Logic Board with Plate 390MHz *** No Longer Available

PS241F

Adjustable Regulated Power Supply with Optional BBU 6-24VDC 1AMP

3 preset voltages: 6 12 and 24 VDC
Full adjustment from 2 to 24 VDC if required
Requires AC transformer for input power (minimum 14 VAC for 12 VDC output 26 VAC for 24 VDC output cannot be connected directly to 120 VAC)
Maximum 1 amp. Output at 70 deg. F and free air
Ripple: Minimum load: 0.007vrms Half load: 0.028vrms Maximum load: 0.057vrms
Regulation: 97.5%

.......more details

Wiring Diagram Diagramme de raccordement Spec Sheet Spécifications

TR-GUARD

Track Guard Z type 60" high to Protect 3" Track Sold as a Pair

Provides impact protection to vertical track
11 gauge (.125 thick)
Galvanized steel no paint

41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

Fits square trolley rail only
Same as 183A163

GH105-L5

LiftMaster Gearhead with Brake 1 HP 575V 3-Phase Logic 5

GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
GH operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

Single Pull Switch Control
Hazardous Area Overhead Mt. (NEMA 7/9)
Die cast hazardous area enclosure
May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.

.......more details

36-RWB-PAIR

Winding Bars Round 36" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

DT-312

Linear 1-btn Delta3 Transmitter 312 MHz *No Longer Available*

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 312 MHz

.......more details

Programming Instructions

IS-3

Interlock Switch for Rolling Steel Doors / Grills

Prevents the control of the operator when the door is locked.
The switch is a normally closed contact which is connected to the operator interlock terminal.

P93501100013

Lux 2B Hydraulic Swing Gate Operator 120V UL/CSA

Leaf Weight: Up to 660 lbs (300 Kg)
Leaf Length: Up to 10ft (3 m)
Opening / Closing time: 17 seconds

480LM

LiftMaster Alternate Mounting / Extension Kit for 3800 3900 8900W 8500 8500W

Enables the opener to be lowered due to obstructed areas and low ceilings
lowers the operator by 6" requires 1-1/2" above the door shaft
Installs quickly and easily
Same as 480LMB
Compatible with wall mount opener 98032 and 98022

Installation Manual Manuel d'Installation

2598

Aluminum 5/16" Cable Eyelet

For use on Whiting dry freight and refer doors
Use with 1/8" stainless or galvanized cable

41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

Fits 3265 PD612C
Replaces 41AC150-2 (board only - need to install on exisiting panel)
Also known as 41AC050 41AC050-2M

MT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator

1/2 HP 120 volt 1 phase medium-duty logic trolley operator
Medium-duty logic board with integral 315 MHz radio receiver
CPSU commercial photoeyes included
4L V-Belt #48 drive chain adjustable friction clutch
Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
2 year warranty

.......more details

Installation manual Manuel d'installation Product guide Guide de produit

WG-305

Devanco White Lithium Grease

Provides long lasting lubrication and protection against rust and corrosion
Ideal for metal to metal applications
Sprays on thick providing a long-lasting protective coating that won't run off

Material Safety Data Sheet Fiche Signalétique

104078

Allstar Wireless Keypad 9931-WKE 318 MHz ** To Extent of Inventory

Compatible with Allstar and MVP receivers
4-digit access code
Backlit keys
Operate LED
Power: 9-volt battery
Codes: 19683

.......more details

Programming Instructions

7FT-RAIL-SCREW

LiftMaster 7' screw drive rail 3077SD

One piece rail

MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

Makes any garage door operator compatible with MegaCode transmitters
Simple plug-in design
Easy to install - one connection using two-conductor wire
Memory: storage for up to 10 MegaCode transmitters
Normally open contact activates for 0.5 seconds
Power: 110 VAC +/- 10% 60 Hz

.......more details

881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
Light run-time is 4 1/2 minutes with adjustable light timer option

.......more details