Devanco Canada - Get The Right Garage Door Opener‎ and Parts

813LMX

LiftMaster 3-btn Dip-Style Transmitter Sec+ 2.0

Encrypted DIP style three-button remote control with Security+2.0 technology
Ideal for applications such as gated communities or commercial applications requiring a large number of remotes for a common entrance
Easy to code 12-position DIP switch offers up to 4096 codes
May also be programmed for Open/Close/Stop functionality
Narrow band transmission on 3 simultaneous frequencies (310 315 390 MHz)
Compatible only with Security+ 2.0™ commercial receivers and operators

.......more details

Programming instructions Instructions de programmation Product Guide

1184HD

Whiting Hold Open Device 1184 Heavy-Duty Track Mount

This is a field install accessory.
Also known as: Positive Stop Assembly
This is installed onto the panel when the door is opened it is engaged and will keep the door open above the header so there is no hang down of the door.
The door will stay open above the header to eliminated the door being damaged.

.177-2-L

Cut-to-Length Torsion Spring .177 x 2" Left Hand Wound Gold

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.177-2-R

Cut-to-Length Torsion Spring .177 x 2" Right Hand Wound Gold

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

Z9206

Door Track Anvil

Used as a pounding block to hammer mangled track back into shape
For 2" track

HSO112

Hinge 1/2-Hinge OHD "A" Style 12-ga Stainless Steel

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish

226-9313

Lithium AA 3.6V Battery

Used in various types of photo eyes

HBS2UD

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Double End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (4) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For 1-5/8"-2" Doors
Fits 2" or 3" Track
Double End Stile
Pins and Cotters

.......more details

PED42

Pedestal Post 42" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look
Same as G559

CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

Single limit with curved actuator lever
Switch attaches directly to the Logic 6000 board

1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

200ft spool of vinyl insert.

25E10051

Truck Door Center Hinge Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Cross Reference: W #15 T #70159
Box quantity: 50

HD8460-200

T-Handle Cable Lock System 2"

Complete cable locking system for a 2" door.
System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
Also works for for 1-3/4" doors

H11G05

Hinge #5 x 11 gauge

11 gauge # 5 hinge - 0.76 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

Z9003

Pusher Spring - 27" Sold as a Pair

Pusher spring 27" long with 15" travel. Sold as a pair

Z9002

Pusher Spring - 15" Sold as a Pair

Pusher spring 15" long with 6" travel. Sold as a pair

R5200

Pulley 3" HD Yellow Zinc Plated Steel 200lb Max

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/8"
Riveted with Ball Bearing

25-10102

Truck Door 2" Steel Roller 3" Shaft for Whiting Roll-Up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #2996 T #70224

L957W

LiftMaster Motion Detecting Control Panel Security+ 3.0

CAPACITOR037R

Manaras Capacitor 340-408uf 165VAC incl. Bleeder Resistor

Replacement for capacitor037 on MOTOR256

0-205679

Linear Proxpad Plus Integrated Prox Reader and Controller w/Keypad

Prox.pad™ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.

.......more details

2022691

FAAC Control Board for Model 741

OTBH-6233-1-M-N1

Manaras Trolley Operator 3/4 HP 208V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

RN1124-10

Roller 2" Nylon 4" stem 11 ball White 10/PKG Sold per Pack

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.69"
Box qty: 15 packs of 10 Box weight: 49 lbs (2-4-11 White Nylon)

.192-2-L

Cut-to-Length Torsion Spring .192 x 2" Left Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

ID-001

Skylink Safety Beam Sensor Kit

For use with Skylink garage door openers.
Includes One Emitter and One Receiver Module.
Install the Safety Beam Sensor Kit to the bottom of the track.
When an object blocks the Invisible Infrared Beam the descent of the door will stop and reverse.
Illuminated LED indication.
Easy to Install.

.......more details

41A3588-1

LiftMaster Belt Idler Pulley and Bracket (Built Years Pre-2000)

��This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers.
Works on models 1270. 1280 & 1280R

DS75

Light Commercial Non-Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

Mini Storage door non insulated with exterior curtain lock
Custom ordered to exact size
Available colors: Wayne Dalton White Glossy White Mist White Black Contemporary Brown Bronze Buckskin Desert Tan Polar Blue Pacific Blue Royal Blue Teal Bright Green Hunter Green Fern Green Sea Green Cedar Red Violet Red Patriot Red Silhouette Grey Yellow Maroon Harvest Orange Sunset Orange Tangerine

Sell Sheet Drawing

K1D8052-1CC

LiftMaster Control Board for LA500DC LA400 LA412

014D1270D

Z9210

Spring Spreader Tool

Used to spread the spring coils while repairing a broken spring

SSZP24

Solid Shaft 1" Keyed Zinc Plated 24'

T501L5

LiftMaster 1/2HP 115/230 Volt 1Ph Commercial Trolley Operator ***NLA

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

K001D8072-1

LiftMaster Single Phase Relay/Power Board (K001D8396-1)

For Logic 5 commercial operators
Same as K001D8396-1
014D1276E

50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

8FT-I-BEAM

LiftMaster 8' I-Beam Rail 3708CH / CD1008

I-Beam Chain Drive Rail for model 3595

CPS

LiftMaster Commercial Protector System Eyes

Universal commercial photo-eye kit for indoor use
Interface box allows CPS to work with all operators
24 volt AC/DC supply voltage
Mounting hardware included
Sensing distance of 30 feet
Receiving Eye - A: 001D6857-1 Sending Eye - A: 001D6857-2

.......more details

Installation Manual

41A4885-2

LiftMaster MVIS Pulley & Worm Gear Assembly

Gear and sprocket assembly for belt drive models between 1995-2002

Installation Manual Manuel d'Installation

MK00488

Micanan Electronic Circuit Board Monitored

Replacement board for PRO-LH (50-11)
Board has terminals P1 & P2
Up to 20 transmitters can be programmed

Instructions Manual

STATION078

Manaras 3-btn Push-Button Control Station Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.

Sell sheet

1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

For the temporary repair of a broken spring.
Wire size: .2187 - .3065

SF200

Spring Fitting 2" Pair

Unviversal thread for use in either LH or RH wound springs.
Pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .3065".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft
Winding bar hole 1/2"

.......more details

H11G03

Hinge #3 x 11 gauge

11 gauge # 3 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

RS1027

Roller 2" Steel 7" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 6.25" Overall Length: 7.25"
Box qty: 180 Box weight: 73.5 lbs (2-7-10 steel)

RN1127

Roller 2" Nylon 7" stem 11 ball White

White Nylon Roller Wheel Diameter: 2"
Working Length: 6.31" Overall Length: 7.25"
Box qty: 150 Box weight: 65.5 lbs (2-7-11 White Nylon)

1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

.283_2-5/8"-RH

Torsion Spring .283 x 2-5/8" x 12ft RH White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft

H11G08

Hinge #8 x 11 gauge

11 gauge #8 hinge - 0.87 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

L993M

LiftMaster 3-btn Visor Remote Control MAX Security+ 3.0

L991S

LiftMaster 1-btn Standard Visor Remote Control Sec+ 3.0

3-5273

Serco Pusher Assembly AB1000

27118-600V

Doorlec Electric Motor TEFC 2HP 600V 3PH DC224C

Frame size is 56C 1725 RPM for worm-gear reducer driven models

12118

Doorlec Commercial Aluminum Sliding Carriage

Works on Doorlec trolley operators

Z9959

Tension Release Hub Torsion Spring Back Winder

Safely back wind the torsion springs in tricky “slipped cable” situations
Easily slide and tighten the solid steel hub on either end of the torsion shaft to back wind the torsion springs using a 5/8" winding bar unwrap and re-install the cables on drum
Can be used on 1" solid or hollow shafts

HRD-288-1

EMX Universal Mounting Bracket L-Shape Black Sold per Piece

Fits RET2 MON2 4X2 WEL-RX REFLECTOR-O-EX models

2050Z

LiftMaster HD Roller Cage Bearing Hinge Bolt to Gate/Post Zinc Coated Sold Individually

Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate Bolt to Post (Corrosion Protected Zinc Coated)
Heavy Duty Construction for Maximum Durability
Dependable Roller Cage Bearing Design
Even Weight Distribution
Five Times The Weight-Bearing Surface of the Nearest Large Hinge
Convenient Bolt-On Model

.......more details

BEARING033

Manaras 605 Ball Bearing 5/8"

1016-ADHSVE-CAULK

Adhesive for Storm Shield Caulk Tubes 10.3oz

For use with 1016

30B652

LiftMaster Capacitor 89uF 120V

Also known as: K030B0652-1 30B0652 030B0652-1 030B0652

746

Fasteners Ribbed Neck Track Bolt 5/16-18 x 3/4" Zinc 1000/box

E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-NR-1

Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
Easy to wire terminal strip
Plug-in replaceable outputs
Range: 40ft
Power: 24-240V AC/DC
The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.

.......more details

Wiring Diagrams Sell sheet

DB13-T

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Tapered Sides Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
4-1/2" depth
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.

.......more details

LA500XL20W

LiftMaster Single Arm Solar Package for LA500 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA500DC)

Kit Includes: LA500DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA500DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016
Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.

Manuel d'installation Installation manual Sell Sheet Brochure

36645R

Genie Screw Drive Coupler

This coupler only works on the following models manufactured after June 2011.
TriloG 1200 (3064) TriloG 1500 (4064)
PowerMax 1200 (3062) PowerMax 1500 (4062)
GPower 900 (2564)
Powerlift 900 (2562)

DB13

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

3-44-2

Roller Carrier Only 2-Hole Sold per Piece

Sold per piece no box quantity

CF-101-16

Commercial Side & Top Weather-Strip 16' Long Aluminum / Vinyl

Same as Garaga CF101

17314

Doorlec DC-3200R Industrial Receiver EEMAC 1 up to 32 Doors or Gates (Includes Extra Long Antenna PN# 17355)

Works with Doorlec 17315 remote control to 32 doors

Wiring instructions

HBS2U

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Single End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets (2) Clevis Pins (2) Cotter Pins*

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For 1-5/8"-2" Doors
Fits 2" or 3" Track
Single End Stile
Pins and Cotters

.......more details

MD-00035

Micanan Offset Link #410

.262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

1007-1-5/8-8

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

For door thickness of 1-5/8" to 1-3/4"

IS40P

BEA Presence Sensor

Infrared presence sensor for use in industrial applications. The sendor utilizes 40 active infrared spots for reliable detection.
Ideal for use on automatic industrial doors vehicle gates/barriers and loading docks.
Equipped with 9 pre-programmed pattern configurations for various industrial applications.
Various learn time settings allow presence detection to either remain constant or ignore a motionless object after a pre-determined period of time.
Mounting height: 8-16'
Detection field: 10'x10' at max. mounting height of 16'

.......more details

Installation manual Sell sheet Cut sheet

.192-2-LH-C

Torsion Spring 192 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .192 ID: 2" Length: 12 ft

SPR41B12X1

Sprocket 41B12 1" Shaft 1/4" keyway 2SS 5/16"

8FT-BELT-LDO

Linear 8ft Belt Drive Rail for LD050/LS050/LDCO (HBT8C)

8ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits

.283_2-5/8"-LH

Torsion Spring .283 x 2-5/8" x 12ft LH White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft

.225_2"-LH

Torsion Spring .225 x 2" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

19-48ML

Master Link #48

For #48 chain (#410)
Same as #65 chain

H14GHALF

Half Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 1-5/8" wide with slotted holes

H14G03

Hinge #3 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#3 position
Use between sections 3 and 4
Same as part number 243

.......more details

TRANSF142

Manaras Transformer 575-24V 40VA

Transformer 575V Primary 24V Secondary 40VA

DT4A

Linear 4-btn Delta3 Transmitter 310 MHz (DNT00027B)

Activates one four-channel receiver (DR4) two 2-channel receivers (DR2) or four single-channel receivers (DR DRQP or DRM).
Can also be used as remote UP DOWN STOP control for commercial operators with DR-4 receiver.
8-dip switch 64 selectable codes
Same as: DNT00027B or DT4A
310 MHz frequency

Programming Instructions

DM54

Cable Drum High Lift 54" 5250-54 Pair

54" High Lift aluminum die cast alloy.
3/8"-16x2" hardened cup point set screws installed with red heads.
Color coded: Red-LH and Black=RH.
Maximum High Lift: 54" Maximum Door Height: 180" + High Lift
Rated lift per drum: 500 lbs 1000 lbs per door max
Maximum cable diameter: 3/16"

.......more details

K15-50B18QGX

Output Sprocket for SL595 and SL595UL

��This is a replacement Output Sprocket. Compatible with LiftMaster® Model SL595U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

.171-2-3/16-72-LH

Spring Wire .171 x 2-3/16 x 72" LHW Galvanized

SW-500

Devanco Industrial Spring Winder 500 for 3.75" - 6" Torsion Springs

W-500 is an Overhead Garage Door Torsion Spring Tensioning Tool for commercial and industrial sectional doors with springs ranging from 3.75" to 6". It can accommodate both 1.0 and 1.25 diameter shafts. This device prevents work-related accidents and significantly reduces physical strain during the torsion spring cranking process The SW-500 is designed for use with a cordless drill (Non-impact) with a 13mm socket to make the job faster and safer than using winding bars. ***Richard Wilcox springs require the SW-500-ADAPTER. Technical Specifications:
Weight: 8.6 kg / 18.9 lbs
Length: 77.2 cm / 30.39 inches
Max. Torque: 369lb/ft
RPM: 500-2000
Material: Aluminium steel plastic

.......more details

Sell Sheet

CRBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

P-8833TC

Pulsar 3-btn 9-Door Transmitter 318 MHz

Allstar compatible
Nine channel transmitter
8 dipswitches 318 MHz

Programming instructions

1-0298

RW Track Bracket 1x33

Description: Formed Steel 3/16" thick
Finish: Black enamel

.187_2"-LH

Torsion Spring .187 x 2" x 12ft LH ***NLA

Wire size: .187
Inside diameter: 2"
Length: 12 ft

XBA6

NICE LED Arm Light Kit 6M

21001

Limit Switch Micro

K75-10406

LiftMaster Drive Chain Connector Link Kit APT

Also known as: 30515363 305105363

K71-D3PH

LiftMaster Drum Brake Kit 3 Ph 208/230/460V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details