Devanco Canada - Get The Right Garage Door Opener‎ and Parts

655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

GM3T-BX

Genie Universal Master 3-Button Remote - 37344R

Three Button Master™ Visor Remote
This 3 button remote can be used with 3 Intellicode openers
Replaces all Intellicode Series I And Series ll remotes
Replaces 9 switch and 12 switch 390MHz Genie remotes
Works with all Genie model Gated Community Receivers
This remote will not work with 315MHz Canada 12 switches openers

.......more details

Programming Instructions Instructions de programmation

.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

C-134-INSTALLED

Cones 1-3/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF175

111010.0001

Overhead Door Serpentine VBelt 27"

Serpentine belt 27" long
Fits Genie GCL-T Trolley operator
Some Overhead drawbar models: JST RSX RMX

7001-14-W/B

Commercial Side & Top Weather-Strip 14' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

.283_3-3/4"-LH

Torsion Spring .283 x 3-3/4" x 12ft LH White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft

.243_3-3/4"-LH

Torsion Spring .243 x 3-3/4" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft

.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 1-3/4"
Length: 12 ft

29-31244

LiftMaster Relay 24VDC 6-Pin DPST (A & B Relay) All Operators

19-50HL

Half (Offset) Link #50

Half link for #50 chain
ANSI Standard Carbon Steel

K001A6837

LiftMaster Replacement Logic 4 Circuit Board L4

iftMaster replacement logic board (L4) kit for Commercial operators L4 board is UL325 compliant & requires CSPU photoeyes for momentary contact operation
Works with LiftMaster operators of all voltages and HP
Maintenance Alert System (MAS)
Open Mid Stop feature
Timer-to-close mode
Car dealer mode

.......more details

24-24-6

Small Relay 24VAC 11-Pin 3 PDT

CAM011

Manaras Limit Cam

Limit cam for Mountshaft018A 018B
2 cam's required per shaft

.437_5-1/4"-RH

Torsion Spring .437 x 5-1/4" x 12ft RH Red/Green

Wire size: .437
Inside diameter: 5-1/4"
Length: 12 ft

.306_5-1/4"-RH

Torsion Spring .306 x 5-1/4" x 12ft RH Red

Wire size: .306
Inside diameter: 5-1/4"
Length: 12 ft

.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft

.319_3-3/4"-RH

Torsion Spring .319 x 3-3/4" x 12ft RH Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft

.207_2-5/8"-RH

Torsion Spring .207 x 2-5/8" x 12ft RH Brown

Wire size: .207
Inside diameter: 2-5/8"
Length: 12 ft

.283_1-3/4"-RH

Torsion Spring .283 x 1-3/4" x 12ft RH White

Wire size: .283
Inside diameter: 1-3/4"
Length: 12 ft

.207_1-3/4"-RH

Torsion Spring .207 x 1-3/4" x 12ft RH Brown

Wire size: .207
Inside diameter: 1-3/4"
Length: 12 ft

37500

Doorlec DC-2000 Electronic Circuit Board

Works in all Doorlec model openers except R-99
Input power to board is 120V
24V DC available on terminals 9 & 11
Accessory power on terminals 1 & 11
1 = Stop. 2 = Com. 3 = Open 4 = Close

MK00488

Micanan Electronic Circuit Board Monitored

Replacement board for PRO-LH (50-11)
Board has terminals P1 & P2
Up to 20 transmitters can be programmed

Instructions Manual

MI00006

Micanan VBelt 5L 32.5" 5L325

OPH-6533-ECB

Manaras Opera-H 3/4HP 600V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

RADIO-EM103MD

Manaras 3-btn transmitter configured as 3x single-btn Multiple Doors Rolling Code 390 MHz

Open/Close remote for 3 doors
LED indicator CR2032 battery and visor clip included
Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.

Manual

109410

Linear 2-Channel Multi-Code Visor Transmitter 310 MHz

Open/Close remote for 2 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches - 10 dip switches
Power: 9-volt battery
Codes: 1024 per channel (set by dip switches)

.......more details

Programming Instructions

HAE00018

Linear Inner Slide Assembly - Chain (HCT)

For LSO50 LDO33 & LDO50

219109

Capacitor 1/3 HP 43-53 MFD 250V

For LDO33 only

1016

Storm Shield Sold per Foot with 1 caulk tube of adhesive per 20ft

Installed underneath garage door to prevent water from flowing into garage.
Can be driven over with vehicle
Color: Black
Width: 3-3/16" Thickness: 0.5" (highest point)
Comes with 6 x 10.3oz caulk tubes per 100'

Installation Instructions

1005-1-3/8-24'

Aluminum Bottom Retainer U-Shaped 24' Long *** 24' is DISC

For door thickness 1-3/8"

1004-2-24'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 24 ft***Actual Length 24'4"***

For door thickness 2"

TC1

Tri-Code Transmitter 1-btn Visor - DISCONTINUED

10 dipswitch format 3-position slide switch
Compatible with Multi-Code 300 & 310 MHz Delta3 & Stanley 310 MHz
Discontinued 7/1/13

375LMC Programming Instructions Instructions de programmation pour 375LMC

PULL-CHAIN

Pull Chain Spring Only 12" Long

Spring Only for pull chain device
Used with a hand chain for full vertical doors.
Eliminates the need for leaf bumpers

1001-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

Aluminum retainer with black dual-fin vinyl

1001-10-GREY

Commercial Side & Top Weather-Strip 10' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

1001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-70

Extension Spring 8' Door - 70 lbs Orange ** check for availability

Double - Loop
32" long 48" stretch 70 lb load
Springs sold individually

25-42-150

Extension Spring 7' Door - 150 lbs Red

Double - Loop
25" long 42" stretch 150 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

91-00400

Truck Door Step Bolt 1/4"-20 x 1.25" (3/4" head)- Sold Per Piece

Zinc plated finish
Cross Reference: T #80015-1610 120250

28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-24401

Truck Door Dual Torsion Spring Assembly 93/33 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 93" Spring Length: 33" Wire diameter: .182 - Winding cone color: Green

27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 98" Spring Length: 60" Wire Size: .243
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire
Heavy-duty cast aluminum cable drums hold up to 130" of cable

.......more details

DM11VL

Cable Drum Vertical Lift 11' 850-11 Pair

11' Vertical Lift aluminum die cast alloy.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
Rated Lift per Drum: 425 lbs.
Max. Cable Diameter: 3/16".
Mounting: 1" solid shaft with 1/4" keyway.

.......more details

27-20303

Truck Door Cable Drum and Bearing Roadside (LH) for Whiting Roll-Up Doors

Black nylon drum with bearing
Cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines Left or Right drum (Left = Red)
Cross Reference: 2547

26-40400

Truck Door Dual Durometer Side Seal 5/16" Track Spacing 114" Long for Whiting Dryfreight Doors

Allows for easy door operation.
Seal protects cargo area from dirt and moisture
Will not bunch up as bottom panel goes around top curve.
Co-extruded using rigid PVC backing with flexible PVC seal against the door.
For use with right angle vertical track
Fits only right angle vertical track assembly.

.......more details

26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

DM54LC

Cable Drum High Lift 54" 400-54HL Pair

54" LC High Lift-LD Aluminum die cast alloy.
3/8"-16x2" hardened cup point set screws installed with red heads.
Color coded: Red-LH and Black=RH. Maximum High Lift: 54"
Maximum Door Height: 120" + High Lift
Rated lift per drum: 275 lbs 550 lb per door max
Maximum cable diameter: 5/32" max

.......more details

CBB125

Stop & Sleeve 1/4" 100 pair

Includes 100 stops and 100 oval sleeves

RN1327

Roller 2" Nylon 7" stem 13 ball White Sold per Roller

White Nylon Roller Wheel Diameter: 2"
Working Length: 6.62" Overall Length: 7.59"
Box qty: 100 Box weight: 44.8 lbs (2-7-13 White Nylon)

CB3160500

Cable 3/16" 7x19 500' Galvanized

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs

Comparison charts

R5211

Cast Iron Pulley 5" with stud

5" Cast Iron Pulley with double stud
cast iron pulley mounted on two pressed sealed bearings
Maximum cable diameter: 1/4"

GTL-PLUS

Devanco Door Lube 454g Aerosol

Ozone Friendly Door Lubricant with anti-wear and extreme pressure additives.
Non-Drip formula provides long lasting lubrication and protection where metal to metal friction occurs. •Ideal for use on door tracks hinges springs rollers chains cables gears and more.
Available for private label
12 cans per case

Safety data sheet Fiche de données de sécurité

.205-3.5-10-LHW

Mini Storage Spring .205 x 3.5" x 10" long Left Hand

CR-2154

Raynor Replacement Photocells *** Discontinued

The original PEC-R3 Sensors manufactured by Raynor are no longer available.
The CR-2154 Sensors are the only sensors currently available to replace the original PEC-R3 Sensors.
Includes both the Emitter and Receiver sensors
Includes new sensor mounting brackets. Wires are not included.
These sensors are slightly different and will not mount to the original PEC-R3 sensor brackets.
The new CR-2154 Sensors require new mounting brackets (included) to be installed

.......more details

25E10050

Truck Door Center Hinge Black E-coat finish for Todco Roll-Up Doors

Steel construction Black E-coat finish

SEF2410

Erone Ultra Flat Infrared Photocell 10M (33ft)

Fixed orientation 1 sender and 1 receiver
Range 10M (33ft) in all conditions
Adjustable Sensitivity
1 "NO" and "NC" contact
Power supply 12/24 Vac/dc
Will work with all commercial operators

.......more details

Wireless System Chart

27-24416

Truck Door Dual Torsion Spring Assembly 96/33 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 96" Spring Length: 33" Wire diameter: .182 Winding cone color: Green

BPPVCT

Garex PVC White Transition Moulding 289" #3764

Universal garage door panel adapter molding
Use on any 1-3/4" door
Allows a Garex panel to be used as replacement on any brand door
24' lengths only can be cut for transport

IRB-325

EMX Industries Door and Gate Infrared Thru-Beam Photocells w/ Grey Hoods UL325-2016 EMX-1112-K

Type B1 non-contact sensor for use with automatic gates and doors
Power: 12V to 24V AC/DC
Relay Contacts: 30V 1A
Dimensions: 5.03" High x 3.06" Wide x 3.02" Deep
Housing: UL and CSA Type 4 4X 3 3R 12 13 Rating
Operating Temperature: -40 degrees to 170 degrees

.......more details

Installation manual Sell sheet

41A4208-2

LiftMaster Chain Spreader Kit

Chain Spreader Replacement Kit.
For use with various LiftMaster® and Chamberlain® Chain drive garage door opener models.
Complete kit includes: Chain spreader replacement screws and washers.
Also known as: 41A4208 41A4208-2 062210

MV-00304

Micanan Wireless Key Switch

201-300-301-01

Equinoxe Long Range Transmitter O/C/S for 1-Door 433 MHz New Generation

Open/Close/Stop remote for 1 door
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Year 2016 + (red sticker under batteries)

Programming Instructions Instructions de programmation

EP2986

Exhaust Port 5" non latching long barrel

5" inside diameter 2" sleeve - non latching.
Includes fasteners & gaskets.
Polished aluminum finish.

TLS1CARD

LiftMaster Option Board for L4 L5

Works in conjunction with Logic 4 & Logic 5 to provide seven field-selectable modifications
Including six door traffic control options
A means to connect External Open & Close limits by using a selectable DIP switch
Controls both 24V & 110V traffic lights
Formally known as RDGRNCARD

Installation Manual

801-300-001-00

Equinoxe Long Range Receiver 1-Door 433 MHz Pre-2016 *** To Extent of Inventory

1000 ft range
Old generation - prior to 2016

Programming Instructions Instructions de programmation

36-RWB-PAIR

Winding Bars Round 36" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Supplied with quick-disconnect key ring
Power: Two CR2016 batteries incl.
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 1.25" W x 2.25" H x .48" D

.......more details

Programming Instructions

71-B240

LiftMaster Interior Mount Brake Assembly 230-460V

Assembly includes: Brake Hub Kit Brake Release Lever Brake Disk Spring Cup Studs Compression Springs Brake Solenoid Solenoid Cover Spacers Mounting Plate Pressure Plate Feather Key Conduit.
Works on LiftMaster trolley garage door openers

Instruction Manual

FGS-634

Devanco Food Grade Silicone 262g

For use in food and industrial plants
Stops squeaks
Prevents sticking and corrosion
Protects rubber mouldings and weather stripping

Safety Data Sheet Fiche de données de sécurité

841LM-NOBOX

LiftMaster Automatic Garage Door Lock No Box

Automatic operation performs in tandem with the opener so it always locks and unlocks.
Anywhere assurance smartphone monitoring with the MyQ® App means homeowners always know that the garage is secure
Absolute protection the automatic deadbolt lock makes the garage door virtually impenetrable
Comes included with 8500W
Works on models 8550WLB 8360W 8587W & WLED
same as Part # 001D8875

.......more details

R5993

Shaft Collar 1" Stainless Steel with 1 Set Screw

Set Screw: 5/16 x 18
1" ID

SBR-N1-0L-H120

Micanan Brake Assembly for PRO-HBH LH 120V Solenoid included

Solenoid Included

BGARM12

LiftMaster TECHNA Barrier Gate Arm 12 ft without LED

3” Aluminum arm with integrated LED lights channel designed exclusively TECHNA barrier gate operators
Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle. Additionally it is compatible with the S50L a wireless edge safety device.
(Optional) LEDs are easily installed by sliding them into the arm's center channel and securing them with the included press-in clip
IP68 rated waterproof LED lights

.......more details

OGH-6114-M-N1-RH

Manaras 1 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

BCSI-PM04

Pivin Drapeau Gear Reducer in Synthetic Oil *** Price by Quote Only

210264

Skylink Case Cover Atoms

LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

D4-12

Extruded Bumper Black 12" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
98% (±2) impact recovery
All extruded fenders are supplied with a metal washer insert

D4-18

Extruded Bumper Black 18" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
98% (±2) impact recovery
All extruded fenders are supplied with a metal washer insert

510.3920.07

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 7 Panels

Upgrade option

38000063

Tork Winch Electric Motor 1HP 115V 1Ph

Replacement electric motor for TW 1200

2376.177*34.960

Whiting Torsion assembly .177 wire size 34" spring length 96" shaft

63000709

FAAC P Limit Switch Magnetic 746/844 (Rack)

Compatible with the 746 and 844 motors
Replaces discontinued FAAC Part; 7580375

93519.5260

Todco Side Seal 80" long Lip ** Special Order Quote Only

Special Order item. Must be quoted each time
Fits Fleetstar Door

WHITING-RV

Whiting Stainless Steel Rivet Option for Dry Freight Door

Upgrade option

JHDC22X1BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 120/240V 1PH 60 Cycles/Hour 2200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

LB610-102

Laminated Bumper Standard Black 102" x 10" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details